Repository 32bit  Forum
Repository 64bit  Wiki

Dopo reinstallazione non si avvia piu startx

Se avete problemi con l'installazione e la configurazione di Slackware postate qui. Non usate questo forum per argomenti generali... per quelli usate Gnu/Linux in genere.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

Dopo reinstallazione non si avvia piu startx

Messaggioda mdj.69 » lun mag 19, 2014 20:46

Salve a tutto il forum.
Dopo molto tempo che non usavo piu slackware, ho deciso di reinstallarlo sul mio pc.
questa e la mia config sistema:
CPU AMD Sempron 2200+
motherb. ASRock KG7
RAM 256MB
HD sata
I 200GB --sdc
II 320GB --sdd
III 500GB -- sda
IV 500GB -- sdb
il fatto e che dopo l'aggiornamento non mi si avvia più l'ambiente grafico.
ho letto vari post e provato varie modifiche ma non riesco ha ricavarci un ragno dal buco. :D
ho seguito anche questo consiglio:
http://forum.swzone.it/linux-e-sistemi- ... solto.html
mdj.69
Linux 1.0
Linux 1.0
 
Messaggi: 13
Iscritto il: ven giu 15, 2007 17:12

Re: Dopo reinstallazione non si avvia piu startx

Messaggioda mdj.69 » lun mag 19, 2014 20:47

vi posto alcuni tag che ho salvato, forse riuscite ha farmi capire dove sbaglio:
Xorg.0.org

Codice: Seleziona tutto
[   172.929]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[   172.929] X Protocol Version 11, Revision 0
[   172.929] Build Operating System: Slackware 14.1 Slackware Linux Project
[   172.930] Current Operating System: Linux darkstar 3.10.17-smp #2 SMP Wed Oct 23 17:13:14 CDT 2013 i686
[   172.930] Kernel command line: initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 nomodeset SLACK_KERNEL=hugesmp.s BOOT_IMAGE=/kernels/hugesmp.s/bzImage root=/dev/sdc2 rdinit=rw
[   172.930] Build Date: 09 October 2013  09:56:03PM
[   172.930] 
[   172.930] Current version of pixman: 0.30.2
[   172.931]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[   172.931] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   172.932] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 19 19:06:18 2014
[   172.990] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   172.999] (==) No Layout section.  Using the first Screen section.
[   172.999] (==) No screen section available. Using defaults.
[   172.999] (**) |-->Screen "Default Screen Section" (0)
[   172.999] (**) |   |-->Monitor "<default monitor>"
[   173.001] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[   173.001] (==) Automatically adding devices
[   173.001] (==) Automatically enabling devices
[   173.001] (==) Automatically adding GPU devices
[   173.018] (WW) The directory "/usr/share/fonts/local" does not exist.
[   173.018]    Entry deleted from font path.
[   173.018] (WW) The directory "/usr/share/fonts/CID" does not exist.
[   173.018]    Entry deleted from font path.
[   173.069] (==) FontPath set to:
   /usr/share/fonts/TTF,
   /usr/share/fonts/OTF,
   /usr/share/fonts/Type1,
   /usr/share/fonts/misc,
   /usr/share/fonts/75dpi/:unscaled,
   /usr/share/fonts/100dpi/:unscaled,
   /usr/share/fonts/75dpi,
   /usr/share/fonts/100dpi,
   /usr/share/fonts/cyrillic
[   173.069] (==) ModulePath set to "/usr/lib/xorg/modules"
[   173.069] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[   173.069] (II) Loader magic: 0x82553a0
[   173.069] (II) Module ABI versions:
[   173.069]    X.Org ANSI C Emulation: 0.4
[   173.069]    X.Org Video Driver: 14.1
[   173.069]    X.Org XInput driver : 19.1
[   173.069]    X.Org Server Extension : 7.0
[   173.071] (--) PCI:*(0:1:0:0) 1039:6330:1849:6331 rev 0, Mem @ 0xc0000000/134217728, 0xcfee0000/131072, I/O @ 0x00008c00/128
[   173.072] (II) Open ACPI successful (/var/run/acpid.socket)
[   173.073] Initializing built-in extension Generic Event Extension
[   173.073] Initializing built-in extension SHAPE
[   173.073] Initializing built-in extension MIT-SHM
[   173.073] Initializing built-in extension XInputExtension
[   173.073] Initializing built-in extension XTEST
[   173.073] Initializing built-in extension BIG-REQUESTS
[   173.073] Initializing built-in extension SYNC
[   173.073] Initializing built-in extension XKEYBOARD
[   173.073] Initializing built-in extension XC-MISC
[   173.074] Initializing built-in extension XINERAMA
[   173.074] Initializing built-in extension XFIXES
[   173.074] Initializing built-in extension RENDER
[   173.074] Initializing built-in extension RANDR
[   173.074] Initializing built-in extension COMPOSITE
[   173.074] Initializing built-in extension DAMAGE
[   173.074] Initializing built-in extension MIT-SCREEN-SAVER
[   173.074] Initializing built-in extension DOUBLE-BUFFER
[   173.074] Initializing built-in extension RECORD
[   173.075] Initializing built-in extension DPMS
[   173.075] Initializing built-in extension X-Resource
[   173.075] Initializing built-in extension XVideo
[   173.075] Initializing built-in extension XVideo-MotionCompensation
[   173.075] Initializing built-in extension XFree86-VidModeExtension
[   173.075] Initializing built-in extension XFree86-DGA
[   173.075] Initializing built-in extension XFree86-DRI
[   173.075] Initializing built-in extension DRI2
[   173.075] (II) LoadModule: "glx"
[   173.080] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   173.103] (II) Module glx: vendor="X.Org Foundation"
[   173.103]    compiled for 1.14.3, module version = 1.0.0
[   173.103]    ABI class: X.Org Server Extension, version 7.0
[   173.103] (==) AIGLX enabled
[   173.104] Loading extension GLX
[   173.104] (==) Matched sis as autoconfigured driver 0
[   173.104] (==) Matched vesa as autoconfigured driver 1
[   173.104] (==) Matched modesetting as autoconfigured driver 2
[   173.104] (==) Matched fbdev as autoconfigured driver 3
[   173.104] (==) Assigned the driver to the xf86ConfigLayout
[   173.104] (II) LoadModule: "sis"
[   173.105] (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
[   173.135] (II) Module sis: vendor="X.Org Foundation"
[   173.135]    compiled for 1.14.2, module version = 0.10.7
[   173.135]    Module class: X.Org Video Driver
[   173.135]    ABI class: X.Org Video Driver, version 14.1
[   173.137] (II) LoadModule: "vesa"
[   173.138] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   173.143] (II) Module vesa: vendor="X.Org Foundation"
[   173.143]    compiled for 1.14.3, module version = 2.3.3
[   173.143]    Module class: X.Org Video Driver
[   173.143]    ABI class: X.Org Video Driver, version 14.1
[   173.143] (II) LoadModule: "modesetting"
[   173.144] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   173.150] (II) Module modesetting: vendor="X.Org Foundation"
[   173.151]    compiled for 1.14.2, module version = 0.8.0
[   173.151]    Module class: X.Org Video Driver
[   173.151]    ABI class: X.Org Video Driver, version 14.1
[   173.151] (II) LoadModule: "fbdev"
[   173.153] (WW) Warning, couldn't open module fbdev
[   173.153] (II) UnloadModule: "fbdev"
[   173.153] (II) Unloading fbdev
[   173.153] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   173.153] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
   SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
   SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
   SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
   SIS340
[   173.153] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
   Volari V3XT/V5/V8/Duo (XG40)
[   173.153] (II) VESA: driver for VESA chipsets: vesa
[   173.153] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   173.154] (--) using VT number 7

[   173.161] (WW) Falling back to old probe method for sis
[   173.161] (--) Assigning device section with no busID to primary device
[   173.161] (--) Chipset SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found
[   173.161] (WW) Falling back to old probe method for vesa
[   173.161] (WW) Falling back to old probe method for modesetting
[   173.161] (EE) open /dev/dri/card0: No such file or directory
[   173.190] (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.14.2.0)
[   173.190] (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
[   173.190] (II) SIS(0): *** See http://www.winischhofer.eu/linuxsisvga.shtml
[   173.190] (II) SIS(0): *** for documentation and updates.
[   173.191] (--) SIS(0): sisfb not found
[   173.191] (--) SIS(0): Relocated I/O registers at 0x8C00
[   173.191] (II) Loading sub module "ramdac"
[   173.191] (II) LoadModule: "ramdac"
[   173.191] (II) Module "ramdac" already built-in
[   173.191] (II) SIS(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[   173.191] (==) SIS(0): Depth 24, (--) framebuffer bpp 32
[   173.191] (==) SIS(0): RGB weight 888
[   173.191] (==) SIS(0): Default visual is TrueColor
[   173.192] (WW) SIS(0): Could not find/read video BIOS
[   173.192] (==) SIS(0): Using HW cursor
[   173.192] (==) SIS(0): Color HW cursor is enabled
[   173.192] (II) SIS(0): Using VRAM command queue, size 512k
[   173.192] (==) SIS(0): Hotkey display switching is enabled
[   173.192] (II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
[   173.192] (II) SIS(0):          whether enabled or disabled. This is no driver bug.
[   173.192] (==) SIS(0): SiSCtrl utility interface is disabled
[   173.192] (II) SIS(0): For information on SiSCtrl, see
      http://www.winischhofer.eu/linuxsispart1.shtml#sisctrl
[   173.192] (==) SIS(0): DRI disabled
[   173.192] (II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
[   173.192] (II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
[   173.192] (--) SIS(0): DIMM0 is DDR SDRAM
[   173.192] (--) SIS(0): DIMM1 is DDR SDRAM
[   173.192] (--) SIS(0): DIMM2 is not installed
[   173.192] (--) SIS(0): DIMM3 is not installed
[   173.192] (--) SIS(0): DRAM type: DDR SDRAM
[   173.193] (--) SIS(0): Memory clock: 332.892 MHz
[   173.193] (--) SIS(0): DRAM bus width: 64 bit
[   173.193] (--) SIS(0): Linear framebuffer at 0xC0000000
[   173.193] (--) SIS(0): MMIO registers at 0xCFEE0000 (size 64K)
[   173.193] (--) SIS(0): VideoRAM: 65536 KB
[   173.193] (II) SIS(0): Using 64960K of framebuffer memory at offset 0K
[   173.193] (--) SIS(0): Hardware supports two video overlays
[   173.193] (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
[   173.193] (II) SIS(0): Gamma correction is enabled
[   173.193] (II) SIS(0): Separate Xv gamma correction is disabled
[   173.193] (--) SIS(0): Memory bandwidth at 32 bpp is 665.784 MHz
[   173.193] (II) Loading sub module "ddc"
[   173.193] (II) LoadModule: "ddc"
[   173.193] (II) Module "ddc" already built-in
[   173.284] (--) SIS(0): CRT1 DDC supported
[   173.285] (--) SIS(0): CRT1 DDC level: 2
[   173.465] (--) SIS(0): CRT1 DDC monitor info: *******************************************
[   173.465] (II) SIS(0): Manufacturer: GSM  Model: 5803  Serial#: 16843009
[   173.465] (II) SIS(0): Year: 2010  Week: 1
[   173.465] (II) SIS(0): EDID Version: 1.3
[   173.465] (II) SIS(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[   173.465] (II) SIS(0): Sync:  Separate
[   173.465] (II) SIS(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[   173.465] (II) SIS(0): Gamma: 2.20
[   173.465] (II) SIS(0): No DPMS capabilities specified; RGB/Color Display
[   173.465] (II) SIS(0): First detailed timing is preferred mode
[   173.465] (II) SIS(0): redX: 0.646 redY: 0.334   greenX: 0.303 greenY: 0.616
[   173.465] (II) SIS(0): blueX: 0.147 blueY: 0.067   whiteX: 0.313 whiteY: 0.329
[   173.465] (II) SIS(0): Supported established timings:
[   173.465] (II) SIS(0): 720x400@70Hz
[   173.465] (II) SIS(0): 640x480@60Hz
[   173.465] (II) SIS(0): 640x480@75Hz
[   173.465] (II) SIS(0): 800x600@60Hz
[   173.465] (II) SIS(0): 800x600@75Hz
[   173.465] (II) SIS(0): 832x624@75Hz
[   173.465] (II) SIS(0): 1024x768@60Hz
[   173.465] (II) SIS(0): 1024x768@75Hz
[   173.465] (II) SIS(0): 1280x1024@75Hz
[   173.465] (II) SIS(0): 1152x864@75Hz
[   173.465] (II) SIS(0): Manufacturer's mask: 0
[   173.465] (II) SIS(0): Supported standard timings:
[   173.465] (II) SIS(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   173.465] (II) SIS(0): #1: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
[   173.465] (II) SIS(0): #2: hsize: 1152  vsize 864  refresh: 60  vid: 16497
[   173.465] (II) SIS(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[   173.465] (II) SIS(0): #4: hsize: 1280  vsize 960  refresh: 75  vid: 20353
[   173.465] (II) SIS(0): #5: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   173.465] (II) SIS(0): Supported detailed timing:
[   173.465] (II) SIS(0): clock: 148.5 MHz   Image Size:  477 x 268 mm
[   173.465] (II) SIS(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   173.466] (II) SIS(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   173.466] (II) SIS(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[   173.466] (II) SIS(0): Monitor name: M2262DP
[   173.466] (II) SIS(0): Monitor name:
[   173.466] (II) SIS(0): EDID (in hex):
[   173.466] (II) SIS(0):    0700000000000000000000009c10c5bf
[   173.466] (II) SIS(0):    b8c61e084410c5bfd9d81f0800000000
[   173.466] (II) SIS(0):    4b0000001e000000ffffffff1c580c08
[   173.466] (II) SIS(0):    0700000001000000e8931e089c10c5bf
[   173.466] (II) SIS(0):    b8c61e089c0025b700000000eaa20f08
[   173.466] (II) SIS(0):    0000000020eb4bb700000000281b3ab7
[   173.466] (II) SIS(0):    004d250864000000ef10c5bf0f7938b7
[   173.466] (II) SIS(0):    9c10c5bf7b2220089810c5bfe03c4909
[   173.466] (II) SIS(0): EDID vendor "GSM", prod id 22531
[   173.466] (II) SIS(0): Using EDID range info for horizontal sync
[   173.466] (II) SIS(0): Using EDID range info for vertical refresh
[   173.466] (II) SIS(0): Printing DDC gathered Modelines:
[   173.466] (II) SIS(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
[   173.466] (II) SIS(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   173.466] (II) SIS(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   173.466] (II) SIS(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   173.466] (II) SIS(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   173.466] (II) SIS(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   173.466] (II) SIS(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   173.466] (II) SIS(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   173.466] (II) SIS(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   173.466] (II) SIS(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   173.466] (II) SIS(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   173.466] (II) SIS(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   173.467] (II) SIS(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[   173.467] (II) SIS(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   173.467] (II) SIS(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 -hsync +vsync (75.2 kHz e)
[   173.467] (--) SIS(0): According to DDC size, CRT1 aspect ratio is 1.78:1 (wide)
[   173.467] (--) SIS(0): End of CRT1 DDC monitor info *************************************
[   173.467] (==) SIS(0): Min pixel clock is 10 MHz
[   173.467] (--) SIS(0): Max pixel clock is 400 MHz
[   173.467] (II) SIS(0): Replaced default mode list with built-in modes
[   173.467] (II) SIS(0): Using real widescreen modes for CRT1 VGA devices
[   173.467] (II) SIS(0):    Use option "ForceCRT1VGAAspect" to overrule
[   173.467] (II) SIS(0): "Unknown reason" in the following list means that the mode
[   173.467] (II) SIS(0): is not supported on the chipset/bridge/current output device.
[   173.467] (II) SIS(0): <default monitor>: Using hsync range of 30.00-83.00 kHz
[   173.467] (II) SIS(0): <default monitor>: Using vrefresh range of 56.00-75.00 Hz
[   173.467] (II) SIS(0): <default monitor>: Using maximum pixel clock of 175.00 MHz
[   173.467] (II) SIS(0): Estimated virtual size for aspect ratio 1.7778 is 1920x1080
[   173.467] (II) SIS(0): Clock range:  10.00 to 400.00 MHz
[   173.467] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[   173.467] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[   173.467] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[   173.467] (II) SIS(0): Not using default mode "800x600" (hsync out of range)
[   173.467] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[   173.467] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[   173.467] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[   173.467] (II) SIS(0): Not using default mode "640x480" (hsync out of range)
[   173.467] (II) SIS(0): Not using default mode "640x480" (hsync out of range)
[   173.467] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[   173.467] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[   173.467] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[   173.467] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
[   173.467] (II) SIS(0): Not using default mode "1280x1024" (vrefresh out of range)
[   173.468] (II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
[   173.468] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1920x1440" (height too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size)
[   173.468] (II) SIS(0): Not using default mode "1280x960" (hsync out of range)
[   173.468] (II) SIS(0): Not using default mode "1152x864" (vrefresh out of range)
[   173.468] (II) SIS(0): Not using default mode "848x480" (vrefresh out of range)
[   173.468] (II) SIS(0): Not using default mode "856x480" (vrefresh out of range)
[   173.468] (--) SIS(0): Virtual size is 1920x1080 (pitch 1920)
[   173.468] (**) SIS(0): *Driver mode "1920x1080": 148.5 MHz, 67.5 kHz, 60.0 Hz
[   173.468] (II) SIS(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync -vsync (67.5 kHz ezP)
[   173.468] (**) SIS(0): *Driver mode "1680x1050": 146.2 MHz, 65.3 kHz, 60.0 Hz
[   173.469] (II) SIS(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz ez)
[   173.469] (**) SIS(0): *Default mode "1680x1050": 147.1 MHz, 65.2 kHz, 60.0 Hz
[   173.469] (II) SIS(0): Modeline "1680x1050"x60.0  147.08  1680 1784 1968 2256  1050 1051 1054 1087 +hsync +vsync (65.2 kHz zd)
[   173.469] (**) SIS(0): *Default mode "1400x1050": 155.7 MHz, 81.4 kHz, 74.7 Hz
[   173.469] (II) SIS(0): Modeline "1400x1050"x74.7  155.71  1400 1464 1528 1912  1050 1052 1064 1090 +hsync +vsync (81.4 kHz zd)
[   173.469] (**) SIS(0): *Default mode "1400x1050": 122.9 MHz, 65.4 kHz, 60.1 Hz
[   173.469] (II) SIS(0): Modeline "1400x1050"x60.1  122.90  1400 1488 1640 1880  1050 1051 1054 1087 +hsync +vsync (65.4 kHz zd)
[   173.469] (**) SIS(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
[   173.469] (II) SIS(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz ez)
[   173.469] (**) SIS(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
[   173.469] (II) SIS(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz ez)
[   173.469] (**) SIS(0): *Default mode "1280x1024": 135.2 MHz, 80.1 kHz, 75.1 Hz
[   173.469] (II) SIS(0): Modeline "1280x1024"x75.1  135.22  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.1 kHz zd)
[   173.469] (**) SIS(0): *Default mode "1280x1024": 107.9 MHz, 63.9 kHz, 59.9 Hz
[   173.469] (II) SIS(0): Modeline "1280x1024"x59.9  107.86  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (63.9 kHz zd)
[   173.469] (**) SIS(0): *Driver mode "1280x960": 129.9 MHz, 75.2 kHz, 75.0 Hz
[   173.469] (II) SIS(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 -hsync +vsync (75.2 kHz ez)
[   173.469] (**) SIS(0): *Default mode "1280x960": 107.9 MHz, 59.9 kHz, 59.9 Hz
[   173.469] (II) SIS(0): Modeline "1280x960"x59.9  107.86  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (59.9 kHz zd)
[   173.469] (**) SIS(0): *Default mode "1280x854": 84.5 MHz, 50.8 kHz, 59.0 Hz
[   173.469] (II) SIS(0): Modeline "1280x854"x59.0   84.48  1280 1296 1408 1664  854 855 858 861 +hsync +vsync (50.8 kHz zd)
[   173.469] (**) SIS(0): *Default mode "1360x768": 87.7 MHz, 48.5 kHz, 60.0 Hz
[   173.469] (II) SIS(0): Modeline "1360x768"x60.0   87.70  1360 1416 1696 1808  768 770 782 808 +hsync +vsync (48.5 kHz zd)
[   173.469] (**) SIS(0): *Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
[   173.469] (II) SIS(0): Modeline "1280x800"x60.0   83.52  1280 1344 1480 1680  800 801 804 828 +hsync +vsync (49.7 kHz zd)
[   173.469] (**) SIS(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[   173.469] (II) SIS(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz ez)
[   173.469] (**) SIS(0): *Driver mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
[   173.469] (II) SIS(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz ez)
[   173.469] (**) SIS(0): *Default mode "1152x864": 107.9 MHz, 67.4 kHz, 74.9 Hz
[   173.469] (II) SIS(0): Modeline "1152x864"x74.9  107.86  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.4 kHz zd)
[   173.469] (**) SIS(0): *Default mode "1152x864": 89.9 MHz, 53.5 kHz, 60.0 Hz
[   173.469] (II) SIS(0): Modeline "1152x864"x60.0   89.89  1152 1216 1472 1680  864 869 877 892 +hsync +vsync (53.5 kHz zd)
[   173.469] (**) SIS(0): *Default mode "1280x768": 80.9 MHz, 47.9 kHz, 59.8 Hz
[   173.469] (II) SIS(0): Modeline "1280x768"x59.8   80.90  1280 1328 1440 1688  768 772 777 802 +hsync +vsync (47.9 kHz zd)
[   173.469] (**) SIS(0): *Default mode "1280x720": 74.3 MHz, 45.1 kHz, 60.1 Hz
[   173.470] (II) SIS(0): Modeline "1280x720"x60.1   74.27  1280 1384 1424 1648  720 725 730 750 +hsync +vsync (45.1 kHz zd)
[   173.470] (**) SIS(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[   173.470] (II) SIS(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz ez)
[   173.470] (**) SIS(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[   173.470] (II) SIS(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz ez)
[   173.470] (**) SIS(0): *Default mode "1024x768": 78.7 MHz, 60.0 kHz, 75.0 Hz
[   173.470] (II) SIS(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz zd)
[   173.470] (**) SIS(0): *Default mode "1024x768": 75.2 MHz, 56.6 kHz, 70.2 Hz
[   173.470] (II) SIS(0): Modeline "1024x768"x70.2   75.17  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.6 kHz zd)
[   173.470] (**) SIS(0): *Default mode "1024x768": 65.1 MHz, 48.5 kHz, 60.1 Hz
[   173.470] (II) SIS(0): Modeline "1024x768"x60.1   65.15  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.5 kHz zd)
[   173.470] (**) SIS(0): *Default mode "1024x576": 47.2 MHz, 35.8 kHz, 60.1 Hz
[   173.470] (II) SIS(0): Modeline "1024x576"x60.1   47.25  1024 1040 1184 1320  576 578 582 596 +hsync +vsync (35.8 kHz zd)
[   173.470] (**) SIS(0): *Default mode "960x600": 41.5 MHz, 37.1 kHz, 60.0 Hz
[   173.470] (II) SIS(0): Modeline "960x600"x60.0   41.50  960 1008 1088 1120  600 603 609 618 +hsync +vsync (37.1 kHz zd)
[   173.470] (**) SIS(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[   173.470] (II) SIS(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz ez)
[   173.470] (**) SIS(0): *Default mode "960x540": 37.3 MHz, 33.8 kHz, 60.0 Hz
[   173.470] (II) SIS(0): Modeline "960x540"x60.0   37.29  960 976 1008 1104  540 543 549 563 +hsync +vsync (33.8 kHz zd)
[   173.470] (**) SIS(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[   173.470] (II) SIS(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz ez)
[   173.470] (**) SIS(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[   173.470] (II) SIS(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz ez)
[   173.470] (**) SIS(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[   173.470] (II) SIS(0): Modeline "800x600"x75.0   49.52  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz zd)
[   173.470] (**) SIS(0): *Default mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz
[   173.470] (II) SIS(0): Modeline "800x600"x72.4   50.11  800 856 976 1040  600 637 643 666 +hsync +vsync (48.2 kHz zd)
[   173.470] (**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[   173.470] (II) SIS(0): Modeline "800x600"x60.3   39.97  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz zd)
[   173.470] (**) SIS(0): *Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
[   173.470] (II) SIS(0): Modeline "800x600"x56.3   36.06  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz zd)
[   173.470] (**) SIS(0): *Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz
[   173.470] (II) SIS(0): Modeline "768x576"x60.1   35.00  768 792 872 976  576 578 581 597 +hsync +vsync (35.9 kHz zd)
[   173.470] (**) SIS(0): *Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz
[   173.470] (II) SIS(0): Modeline "720x576"x60.1   32.73  720 744 816 912  576 578 581 597 +hsync +vsync (35.9 kHz zd)
[   173.470] (**) SIS(0): *Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz
[   173.471] (II) SIS(0): Modeline "856x480"x59.8   33.94  856 872 1000 1072  480 492 495 529 -hsync -vsync (31.7 kHz zd)
[   173.471] (**) SIS(0): *Default mode "848x480": 33.7 MHz, 31.0 kHz, 60.0 Hz
[   173.471] (II) SIS(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 -hsync -vsync (31.0 kHz zd)
[   173.471] (**) SIS(0): *Default mode "800x480": 33.4 MHz, 31.6 kHz, 60.3 Hz
[   173.471] (II) SIS(0): Modeline "800x480"x60.3   33.41  800 848 976 1056  480 490 492 525 +hsync +vsync (31.6 kHz zd)
[   173.471] (**) SIS(0): *Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz
[   173.471] (II) SIS(0): Modeline "720x480"x61.0   28.28  720 728 840 896  480 490 492 517 -hsync -vsync (31.6 kHz zd)
[   173.471] (**) SIS(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[   173.471] (II) SIS(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz ez)
[   173.471] (**) SIS(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[   173.471] (II) SIS(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz ez)
[   173.471] (**) SIS(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[   173.471] (II) SIS(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz zd)
[   173.471] (**) SIS(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[   173.471] (II) SIS(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz zd)
[   173.471] (**) SIS(0): *Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
[   173.471] (II) SIS(0): Modeline "640x480"x59.7   25.06  640 656 752 800  480 490 492 525 -hsync -vsync (31.3 kHz zd)
[   173.471] (**) SIS(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
[   173.471] (II) SIS(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz ez)
[   173.471] (**) SIS(0): *Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz
[   173.471] (II) SIS(0): Modeline "640x400"x71.6   25.06  640 656 752 792  400 413 415 442 -hsync +vsync (31.6 kHz zd)
[   173.471] (**) SIS(0): *Default mode "512x384": 32.6 MHz, 48.5 kHz, 60.1 Hz (D)
[   173.471] (II) SIS(0): Modeline "512x384"x60.1   32.57  512 528 592 672  384 385 388 403 doublescan -hsync -vsync (48.5 kHz zd)
[   173.471] (**) SIS(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[   173.471] (II) SIS(0): Modeline "400x300"x60.3   19.98  400 416 480 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[   173.471] (**) SIS(0): *Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
[   173.471] (II) SIS(0): Modeline "320x240"x60.7   12.53  320 328 376 400  240 245 246 258 doublescan -hsync -vsync (31.3 kHz zd)
[   173.471] (**) SIS(0): *Default mode "320x200": 12.5 MHz, 31.3 kHz, 70.9 Hz (D)
[   173.471] (II) SIS(0): Modeline "320x200"x70.9   12.53  320 328 376 400  200 206 207 221 doublescan -hsync +vsync (31.3 kHz zd)
[   173.471] (**) SIS(0): Display dimensions: (480, 270) mm
[   173.471] (**) SIS(0): DPI set to (101, 101)
[   173.471] (II) Loading sub module "fb"
[   173.471] (II) LoadModule: "fb"
[   173.472] (II) Loading /usr/lib/xorg/modules/libfb.so
[   173.489] (II) Module fb: vendor="X.Org Foundation"
[   173.489]    compiled for 1.14.3, module version = 1.0.0
[   173.489]    ABI class: X.Org ANSI C Emulation, version 0.4
[   173.489] (II) Loading sub module "exa"
[   173.489] (II) LoadModule: "exa"
[   173.490] (II) Loading /usr/lib/xorg/modules/libexa.so
[   173.492] (II) Module exa: vendor="X.Org Foundation"
[   173.492]    compiled for 1.14.3, module version = 2.6.0
[   173.492]    ABI class: X.Org Video Driver, version 14.1
[   173.492] (II) UnloadModule: "vesa"
[   173.492] (II) Unloading vesa
[   173.492] (II) UnloadModule: "modesetting"
[   173.492] (II) Unloading modesetting
[   173.492] (--) Depth 24 pixmap format is 32 bpp
[   173.493] (II) Loading sub module "vbe"
[   173.493] (II) LoadModule: "vbe"
[   173.493] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   173.494] (II) Module vbe: vendor="X.Org Foundation"
[   173.494]    compiled for 1.14.3, module version = 1.1.0
[   173.494]    ABI class: X.Org Video Driver, version 14.1
[   173.494] (II) Loading sub module "int10"
[   173.494] (II) LoadModule: "int10"
[   173.494] (II) Loading /usr/lib/xorg/modules/libint10.so
[   173.496] (II) Module int10: vendor="X.Org Foundation"
[   173.496]    compiled for 1.14.3, module version = 1.0.0
[   173.496]    ABI class: X.Org Video Driver, version 14.1
[   173.496] (II) SIS(0): initializing int10
[   173.498] (II) SIS(0): Primary V_BIOS segment is: 0xc000
[   173.499] (II) SIS(0): VESA BIOS detected
[   173.499] (II) SIS(0): VESA VBE Version 3.0
[   173.499] (II) SIS(0): VESA VBE Total Mem: 16384 kB
[   173.499] (II) SIS(0): VESA VBE OEM: SiS
[   173.499] (II) SIS(0): VESA VBE OEM Software Rev: 1.0
[   173.499] (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
[   173.499] (II) SIS(0): VESA VBE OEM Product: 6330
[   173.499] (II) SIS(0): VESA VBE OEM Product Rev: 2.49.00
[   173.529] (II) SIS(0): Setting custom mode 1920x1080 on CRT1
[   173.542] (II) SIS(0): Setting custom mode 1920x1080 on CRT2
[   173.569] (II) EXA(0): Offscreen pixmap area of 58224640 bytes
[   173.569] (II) EXA(0): Driver registered support for the following operations:
[   173.569] (II)         Solid
[   173.569] (II)         Copy
[   173.569] (II)         UploadToScreen
[   173.569] (II)         DownloadFromScreen
[   173.570] (--) SIS(0): CPU frequency 1509.73Mhz
[   173.571] (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
[   173.585] (--) SIS(0):    Checked libc memcpy()...    369.2 MiB/s
[   173.598] (--) SIS(0):    Checked built-in-1 memcpy()...    369.4 MiB/s
[   173.637] (--) SIS(0):    Checked built-in-2 memcpy()...    76.9 MiB/s
[   173.650] (--) SIS(0):    Checked MMX memcpy()...    366.7 MiB/s
[   173.663] (--) SIS(0):    Checked 3DNow! memcpy()...    367.7 MiB/s
[   173.676] (--) SIS(0):    Checked MMX2 memcpy()...    367.4 MiB/s
[   173.676] (--) SIS(0): Using built-in-1 method for aligned data transfers to video RAM
[   173.676] (--) SIS(0): Using built-in-1 method for unaligned data transfers to video RAM
[   173.676] (--) SIS(0): CPU frequency 1509.73Mhz
[   173.678] (II) SIS(0): Benchmarking video RAM to system RAM memory transfer methods:
[   173.818] (--) SIS(0):    Checked libc memcpy()...    19.4 MiB/s
[   173.957] (--) SIS(0):    Checked built-in-1 memcpy()...    19.4 MiB/s
[   174.098] (--) SIS(0):    Checked built-in-2 memcpy()...    19.2 MiB/s
[   174.176] (--) SIS(0):    Checked MMX memcpy()...    36.4 MiB/s
[   174.255] (--) SIS(0):    Checked 3DNow! memcpy()...    36.1 MiB/s
[   174.334] (--) SIS(0):    Checked MMX2 memcpy()...    35.9 MiB/s
[   174.334] (--) SIS(0): Using MMX method for aligned data transfers from video RAM
[   174.334] (--) SIS(0): Using MMX method for unaligned data transfers from video RAM
[   174.334] (==) SIS(0): Backing store disabled
[   174.334] (==) SIS(0): Silken mouse enabled
[   174.336] (==) SIS(0): DPMS enabled
[   174.336] (II) SIS(0): Using SiS300/315/330/340 series HW Xv
[   174.336] (II) SIS(0): Default Xv adaptor is Video Overlay
[   174.357] (II) SIS(0): Initialized SISCTRL extension version 0.1
[   174.357] (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
[   174.357] (==) RandR enabled
[   174.376] (II) AIGLX: Screen 0 is not DRI2 capable
[   174.376] (II) AIGLX: Screen 0 is not DRI capable
[   174.504] (II) AIGLX: Loaded and initialized swrast
[   174.504] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   175.200] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   175.200] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   175.200] (**) Power Button: Applying InputClass "keyboard-all"
[   175.201] (II) LoadModule: "evdev"
[   175.202] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   175.232] (II) Module evdev: vendor="X.Org Foundation"
[   175.232]    compiled for 1.14.3, module version = 2.8.2
[   175.232]    Module class: X.Org XInput Driver
[   175.232]    ABI class: X.Org XInput driver, version 19.1
[   175.232] (II) Using input driver 'evdev' for 'Power Button'
[   175.232] (**) Power Button: always reports core events
[   175.232] (**) evdev: Power Button: Device: "/dev/input/event3"
[   175.232] (--) evdev: Power Button: Vendor 0 Product 0x1
[   175.232] (--) evdev: Power Button: Found keys
[   175.233] (II) evdev: Power Button: Configuring as keyboard
[   175.233] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   175.233] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   175.233] (**) Option "xkb_rules" "evdev"
[   175.233] (**) Option "xkb_model" "pc104"
[   175.233] (**) Option "xkb_layout" "us"
[   175.233] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   175.299] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   175.299] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   175.299] (**) Power Button: Applying InputClass "keyboard-all"
[   175.299] (II) Using input driver 'evdev' for 'Power Button'
[   175.299] (**) Power Button: always reports core events
[   175.299] (**) evdev: Power Button: Device: "/dev/input/event2"
[   175.299] (--) evdev: Power Button: Vendor 0 Product 0x1
[   175.299] (--) evdev: Power Button: Found keys
[   175.299] (II) evdev: Power Button: Configuring as keyboard
[   175.299] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[   175.299] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   175.299] (**) Option "xkb_rules" "evdev"
[   175.299] (**) Option "xkb_model" "pc104"
[   175.299] (**) Option "xkb_layout" "us"
[   175.300] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   175.301] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[   175.301] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   175.301] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[   175.301] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   175.301] (**) AT Translated Set 2 keyboard: always reports core events
[   175.301] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[   175.301] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   175.301] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   175.301] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   175.302] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1"
[   175.302] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[   175.302] (**) Option "xkb_rules" "evdev"
[   175.302] (**) Option "xkb_model" "pc104"
[   175.302] (**) Option "xkb_layout" "us"
[   175.302] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   175.303] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/event4)
[   175.303] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall"
[   175.303] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech Explorer Mouse'
[   175.304] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
[   175.304] (**) evdev: ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event4"
[   175.304] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Vendor 0x2 Product 0x6
[   175.304] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons
[   175.304] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
[   175.304] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found relative axes
[   175.304] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
[   175.304] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
[   175.304] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Adding scrollwheel support
[   175.304] (**) evdev: ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
[   175.304] (**) evdev: ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   175.304] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[   175.304] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE, id 9)
[   175.304] (II) evdev: ImExPS/2 Logitech Explorer Mouse: initialized for relative axes.
[   175.305] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
[   175.305] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration profile 0
[   175.305] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration factor: 2.000
[   175.305] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration threshold: 4
[   175.306] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/mouse0)
[   175.306] (II) No input driver specified, ignoring this device.
[   175.306] (II) This device may have been added with another device file.
[   175.307] (II) config/udev: Adding input device Speakup (/dev/input/event0)
[   175.307] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[   175.307] (**) Speakup: Applying InputClass "keyboard-all"
[   175.307] (II) Using input driver 'evdev' for 'Speakup'
[   175.307] (**) Speakup: always reports core events
[   175.307] (**) evdev: Speakup: Device: "/dev/input/event0"
[   175.307] (--) evdev: Speakup: Vendor 0 Product 0
[   175.307] (--) evdev: Speakup: Found keys
[   175.307] (II) evdev: Speakup: Configuring as keyboard
[   175.307] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[   175.307] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD, id 10)
[   175.307] (**) Option "xkb_rules" "evdev"
[   175.307] (**) Option "xkb_model" "pc104"
[   175.307] (**) Option "xkb_layout" "us"
[   175.307] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   178.015] (EE)
[   178.015] (EE) Backtrace:
[   178.035] (EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0x81d6099]
[   178.035] (EE) 1: /usr/bin/X (0x8048000+0x191ac4) [0x81d9ac4]
[   178.035] (EE) 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0) [0xffffe40c]
[   178.035] (EE) 3: /usr/lib/xorg/modules/drivers/sis_drv.so (0xb71df000+0x4dc0a) [0xb722cc0a]
[   178.035] (EE) 4: /usr/lib/xorg/modules/drivers/sis_drv.so (0xb71df000+0x3a5f9) [0xb72195f9]
[   178.035] (EE) 5: /usr/lib/xorg/modules/drivers/sis_drv.so (0xb71df000+0x28b3d) [0xb7207b3d]
[   178.035] (EE) 6: /usr/lib/xorg/modules/libexa.so (0xb71a3000+0x5316) [0xb71a8316]
[   178.035] (EE) 7: /usr/lib/xorg/modules/libexa.so (0xb71a3000+0x57f6) [0xb71a87f6]
[   178.035] (EE) 8: /usr/lib/xorg/modules/libexa.so (0xb71a3000+0x58bf) [0xb71a88bf]
[   178.035] (EE) 9: /usr/lib/xorg/modules/libexa.so (0xb71a3000+0x61e2) [0xb71a91e2]
[   178.035] (EE) 10: /usr/lib/xorg/modules/libexa.so (0xb71a3000+0x3f8f) [0xb71a6f8f]
[   178.035] (EE) 11: /usr/lib/xorg/modules/libexa.so (0xb71a3000+0x9183) [0xb71ac183]
[   178.035] (EE) 12: /usr/lib/xorg/modules/libexa.so (0xb71a3000+0x9bb8) [0xb71acbb8]
[   178.036] (EE) 13: /usr/bin/X (miCopyRegion+0x1b8) [0x81b4288]
[   178.036] (EE) 14: /usr/bin/X (miDoCopy+0x520) [0x81b48b0]
[   178.036] (EE) 15: /usr/lib/xorg/modules/libexa.so (0xb71a3000+0x80d2) [0xb71ab0d2]
[   178.036] (EE) 16: /usr/bin/X (0x8048000+0x114c10) [0x815cc10]
[   178.036] (EE) 17: /usr/bin/X (0x8048000+0x2d2cf) [0x80752cf]
[   178.036] (EE) 18: /usr/bin/X (0x8048000+0x3151d) [0x807951d]
[   178.036] (EE) 19: /usr/bin/X (0x8048000+0x1f69a) [0x806769a]
[   178.036] (EE) 20: /lib/libc.so.6 (__libc_start_main+0xf3) [0xb73517a3]
[   178.036] (EE) 21: /usr/bin/X (0x8048000+0x1fa69) [0x8067a69]
[   178.036] (EE)
[   178.036] (EE) Segmentation fault at address 0x0
[   178.037] (EE)
Fatal server error:
[   178.037] (EE) Caught signal 11 (Segmentation fault). Server aborting
[   178.037] (EE)
[   178.037] (EE)
Please consult the The X.Org Foundation support
    at http://wiki.x.org
 for help.
[   178.037] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   178.037] (EE)
[   178.040] (II) SIS(0): Restoring by setting old mode 0x03
[   178.224] (EE) Server terminated with error (1). Closing log file.
mdj.69
Linux 1.0
Linux 1.0
 
Messaggi: 13
Iscritto il: ven giu 15, 2007 17:12

Re: Dopo reinstallazione non si avvia piu startx

Messaggioda mdj.69 » lun mag 19, 2014 20:57

Configurazione PC:

Codice: Seleziona tutto
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x4c783171

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   921602047   460800000    7  HPFS/NTFS/exFAT
/dev/sda2       921602048   976766975    27582464   83  Linux

Disk /dev/sdb: 500.1 GB, 500106780160 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf4bab391

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          63   976768064   488384001    7  HPFS/NTFS/exFAT

Disk /dev/sdc: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders, total 398297088 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x1319b5a5

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *          63   308672909   154336423+   7  HPFS/NTFS/exFAT
/dev/sdc2       308672910   393640694    42483892+  83  Linux
/dev/sdc3       393640695   398297087     2328196+  82  Linux swap / Solaris

Disk /dev/sdd: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc7f5c7f5

   Device Boot      Start         End      Blocks   Id  System
/dev/sdd1   *          63   518192639   259096288+   7  HPFS/NTFS/exFAT
/dev/sdd2       518192640   596316734    39062047+  83  Linux
/dev/sdd3       596316735   621699434    12691350   83  Linux
/dev/sdd4       621699435   625142447     1721506+   c  W95 FAT32 (LBA)

ha.. Dimenticavo ho instalalto la slackware 14.1 ed ho seguito s4d sia versione inglese che la traduzione.
S4 v2.0 e S4 v3.0
ho provato anche l'avvio da slackwarecon:
hugesmp.s root=/dev/sd3 rdinit=ro
(sd3 è dove ho installato la radice del SO)
mdj.69
Linux 1.0
Linux 1.0
 
Messaggi: 13
Iscritto il: ven giu 15, 2007 17:12

Re: Dopo reinstallazione non si avvia piu startx

Messaggioda brg » lun mag 19, 2014 22:06

Sì, ma che scheda video usi? Visto che si tratta del server grafico dovrebbe essere la prima cosa da specificare.

Prova ad avviare il sistema nel terminale e a crearti un xorg.conf specifico, dove usi i driver VESA per la scheda video. Normalmente i VESA funzionano sempre.

Magari dai un'occhiata anche qua https://bugs.launchpad.net/ubuntu/+sour ... ug/1066464 e qua https://bugs.archlinux.org/task/32315 .
Avatar utente
brg
Linux 2.4
Linux 2.4
 
Messaggi: 272
Iscritto il: sab mar 12, 2011 14:20
Località: Montecatini
Slackware: 14.1
Kernel: 3.10.17
Desktop: KDE4

Re: Dopo reinstallazione non si avvia piu startx

Messaggioda Blallo » mar mag 20, 2014 18:06

Vista l'età del pc, potrebbe essere una Sis o una Via (sembra più una Sis) e per mia esperienza spesso Vesa fa a botte con queste due marche qui.
(Per fortuna in via d'estinzione)
Il link di brg effettivamente sembra contenere quel che fa al caso tuo, anche se dopo potremmo provare ad usare il driver "dedicato" e vedere se ce la si fa.
Intanto se riesci anche a postarci l'output di
Codice: Seleziona tutto
lspci

da root, ci fai un favore.
Io sono il detective Arsenio Magret, e porto sempre la camicia TATUATA!
Avatar utente
Blallo
Packager
Packager
 
Messaggi: 3244
Iscritto il: ven ott 12, 2007 10:37
Località: Torino / Torremaggiore (FG)
Nome Cognome: Savino Liguori
Slackware: 14.1 / 12.2
Kernel: 3.12.2-ck
Desktop: Openbox

Re: Dopo reinstallazione non si avvia piu startx

Messaggioda mdj.69 » mar mag 20, 2014 22:01

infatti la scheda grafica è integrata e si tratta di un SIS 741GX. Vi do l'output di lspci:
Codice: Seleziona tutto
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 741/741GX/M741 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
00:0a.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE/SATA Controller (rev 50)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter

poi nel frattempo provo a creare Xorg.conf specifico.

Il bello è che quando l'ho installato la prima volta tutto funzionava. Ho persino aggiunto un utente e facevo tutto da non root.
Poi di punto in bianco ha smesso di funzionare. Visto che era da poco che lo avevo installato, ho pensato di allargare un po le partizioni e lo reinstalalto da zero.. Di li in poi sono diventato matto...
Approposito nel frattempo avevo installato anche Knoppix e li fungeva tutto.
mdj.69
Linux 1.0
Linux 1.0
 
Messaggi: 13
Iscritto il: ven giu 15, 2007 17:12

Re: Dopo reinstallazione non si avvia piu startx

Messaggioda diego » gio mag 22, 2014 16:56

Ciao,
se lanci startx da console e se nella home del tuo utente
hai file come .Xauthority o .xsession* che sono di root
falli diventare di tua prorpieta' e rinominali (o cancellali)
e rinomina ogni eventuale xorg.conf in /etc/X11 (da root)
Sarebbe di aiuto anche l'output di lsmod
Avatar utente
diego
Linux 2.4
Linux 2.4
 
Messaggi: 326
Iscritto il: gio mar 31, 2005 23:00

Re: Dopo reinstallazione non si avvia piu startx

Messaggioda mdj.69 » gio mag 22, 2014 19:11

Dopo qualche tribolo sono riuscito ha far partire slackware. \:D/ \:D/
Anche perche` ogni volta che davo xorg-configure, mi dava error log.
in oltre ho provato ad avviare xinitirc linkando uno ad uno i file xinitrc.*, ma niente.
Alla fine ho dovuto usare vie traverse, purtroppo.
Ora spiego e lo so, non e` da smanettoni... :^o :lol: :lol:
Ho dovuto scaricarmi slax avviarlo e dopo qualche tribolo fare un semplice copia incolla dei seguenti file...
cp /etc/X11/xorg* /dev/sdd2/etc/X11/xorg*
poi sempre da slax ho fatto>
cp /etc/X11/xinit/xinitrc* /dev/sdd2/etc/X11/xinit/xinitrc.
dove /dev/sdd2 e` lapartizione radice di dove ho installato slackware.
Ad ogno modo ragazzi vi ringrazio poiche cosi ho imparato ad usare alcuni passaggi che ha cose noramli non avrei mai fatto. Grazie di nuovo.
Ah dimenticavo, sto scrivendo da slackware.. :D :D
mdj.69
Linux 1.0
Linux 1.0
 
Messaggi: 13
Iscritto il: ven giu 15, 2007 17:12


Torna a Slackware

Chi c’è in linea

Visitano il forum: Nessuno e 2 ospiti