Repository 32bit  Forum
Repository 64bit  Wiki

Cups & USB

Se avete problemi con l'installazione e la configurazione di Slackware postate qui. Non usate questo forum per argomenti generali... per quelli usate Gnu/Linux in genere.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

Cups & USB

Messaggioda salbutamolo » gio feb 12, 2004 8:37

Ciao a tutti, <BR>ho installato la mia stampante (Samsung ML-1210) con cups! Apparentemente tutto è andato a buon fine. Il sistema vede la periferica in /dev/usb/lp0 ma al momento di stampare la pagina di prova, il led "data" sulla stampante lampeggia 1 volta e poi tutto morto! :-Y :-Y :-Y <BR>Tutti i permessi sono a posto, e per l´installazione ho impiegato il file *.PPD scaricato da <!-- BBCode Start --><A HREF="http://www.linuxprinting.org" TARGET="_blank">Linuxprinting</A><!-- BBCode End --> Qualche idea? Tutte le altre periferiche USB (mouse, scanner, pen drive) funzionano benissimo, quindi non mi spiego il problema. Tra l´altro con mandrake non avevo questo problema! La stampante è dotata anche di porta parallela! Secondo voi, è una scelta migliore rispetto alla porta USB, in questo caso specifico? Have a nice day <BR> <BR>Salbutamolo<br>
Avatar utente
salbutamolo
Linux 2.6
Linux 2.6
 
Messaggi: 905
Iscritto il: lun gen 12, 2004 0:00

Cups & USB

Messaggioda useless » gio feb 12, 2004 12:26

prova a controllare quanto ho detto sul decommentare varie linee nei /etc/cups/mime.* in un altro recente post al riguardo.<br>
Avatar utente
useless
Staff
Staff
 
Messaggi: 3896
Iscritto il: sab ott 11, 2003 23:00
Località: A place where the streets have no name

Cups & USB

Messaggioda salbutamolo » gio feb 12, 2004 17:11

Ciao, <BR>ho appena provato a seguire i tuoi suggerimenti, ma niente da fare. La cosa mi fa imbufalire, <BR>perchè se il led lampeggia vuol dire che il sistema comunica con la periferica. Vorrei sapere che problemi ha CUPS con le periferiche USB! Forse non gli piacciono! Altre idee? :-] :-] <BR> <BR>Salbutamolo<br>
Avatar utente
salbutamolo
Linux 2.6
Linux 2.6
 
Messaggi: 905
Iscritto il: lun gen 12, 2004 0:00

Cups & USB

Messaggioda Loris » gio feb 12, 2004 18:52

Perchè non la usi da parallela ? io ho la stessa stampante e va alla grande. <BR><br>
"Ho una testa piuttosto balzana e comunque non sono quello che credete" - Roger Keith Barrett
Avatar utente
Loris
Admin
Admin
 
Messaggi: 7589
Iscritto il: dom mar 30, 2003 23:00
Località: Gradisca D'Isonzo
Nome Cognome: Loris Vincenzi
Slackware: 14.1
Kernel: 3.10.17
Desktop: Kde 4.10.5

Cups & USB

Messaggioda salbutamolo » gio feb 12, 2004 19:04

Ciao Loris, <BR>non lo so perchè! Per Windows era configurata USB e così l´ho lasciata! Non c´è un vero motivo! Secondo te è meglio usarla da LPT? Have a nice day <BR> <BR>Salbutamolo!<br>
Avatar utente
salbutamolo
Linux 2.6
Linux 2.6
 
Messaggi: 905
Iscritto il: lun gen 12, 2004 0:00

Cups & USB

Messaggioda Loris » gio feb 12, 2004 19:14

Questioni di gusti e necessità, la parallela è libera le USB tra scanner o altro le usi di più........<br>
"Ho una testa piuttosto balzana e comunque non sono quello che credete" - Roger Keith Barrett
Avatar utente
Loris
Admin
Admin
 
Messaggi: 7589
Iscritto il: dom mar 30, 2003 23:00
Località: Gradisca D'Isonzo
Nome Cognome: Loris Vincenzi
Slackware: 14.1
Kernel: 3.10.17
Desktop: Kde 4.10.5

Cups & USB

Messaggioda salbutamolo » gio feb 12, 2004 19:36

Tutto vero, <BR>ma visto che non funziona solo quella periferica USB, è diventata un po´ una questione di principio! Tra l´altro ho appena upgradato il kernel alla versione 2.6.2 ti posto il mio .config, così se hai tempo e voglia gli dai un´occhiata e mi dici se ho dimenticato qualcosa di essenziale per la stampante USB! <BR><!-- BBCode Quote Start --><TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE> # <BR># Automatically generated make config: don´t edit <BR># <BR>CONFIG_X86=y <BR>CONFIG_MMU=y <BR>CONFIG_UID16=y <BR>CONFIG_GENERIC_ISA_DMA=y <BR> <BR># <BR># Code maturity level options <BR># <BR>CONFIG_EXPERIMENTAL=y <BR>CONFIG_CLEAN_COMPILE=y <BR>CONFIG_STANDALONE=y <BR>CONFIG_BROKEN_ON_SMP=y <BR> <BR># <BR># General setup <BR># <BR>CONFIG_SWAP=y <BR>CONFIG_SYSVIPC=y <BR>CONFIG_BSD_PROCESS_ACCT=y <BR>CONFIG_SYSCTL=y <BR>CONFIG_LOG_BUF_SHIFT=14 <BR>CONFIG_IKCONFIG=y <BR>CONFIG_IKCONFIG_PROC=y <BR># CONFIG_EMBEDDED is not set <BR>CONFIG_KALLSYMS=y <BR>CONFIG_FUTEX=y <BR>CONFIG_EPOLL=y <BR>CONFIG_IOSCHED_NOOP=y <BR>CONFIG_IOSCHED_AS=y <BR>CONFIG_IOSCHED_DEADLINE=y <BR># CONFIG_CC_OPTIMIZE_FOR_SIZE is not set <BR> <BR># <BR># Loadable module support <BR># <BR>CONFIG_MODULES=y <BR>CONFIG_MODULE_UNLOAD=y <BR>CONFIG_MODULE_FORCE_UNLOAD=y <BR>CONFIG_OBSOLETE_MODPARM=y <BR># CONFIG_MODVERSIONS is not set <BR>CONFIG_KMOD=y <BR> <BR># <BR># Processor type and features <BR># <BR>CONFIG_X86_PC=y <BR># CONFIG_X86_VOYAGER is not set <BR># CONFIG_X86_NUMAQ is not set <BR># CONFIG_X86_SUMMIT is not set <BR># CONFIG_X86_BIGSMP is not set <BR># CONFIG_X86_VISWS is not set <BR># CONFIG_X86_GENERICARCH is not set <BR># CONFIG_X86_ES7000 is not set <BR># CONFIG_M386 is not set <BR># CONFIG_M486 is not set <BR># CONFIG_M586 is not set <BR># CONFIG_M586TSC is not set <BR># CONFIG_M586MMX is not set <BR># CONFIG_M686 is not set <BR># CONFIG_MPENTIUMII is not set <BR># CONFIG_MPENTIUMIII is not set <BR># CONFIG_MPENTIUM4 is not set <BR># CONFIG_MK6 is not set <BR>CONFIG_MK7=y <BR># CONFIG_MK8 is not set <BR># CONFIG_MELAN is not set <BR># CONFIG_MCRUSOE is not set <BR># CONFIG_MWINCHIPC6 is not set <BR># CONFIG_MWINCHIP2 is not set <BR># CONFIG_MWINCHIP3D is not set <BR># CONFIG_MCYRIXIII is not set <BR># CONFIG_MVIAC3_2 is not set <BR># CONFIG_X86_GENERIC is not set <BR>CONFIG_X86_CMPXCHG=y <BR>CONFIG_X86_XADD=y <BR>CONFIG_X86_L1_CACHE_SHIFT=6 <BR>CONFIG_RWSEM_XCHGADD_ALGORITHM=y <BR>CONFIG_X86_WP_WORKS_OK=y <BR>CONFIG_X86_INVLPG=y <BR>CONFIG_X86_BSWAP=y <BR>CONFIG_X86_POPAD_OK=y <BR>CONFIG_X86_GOOD_APIC=y <BR>CONFIG_X86_INTEL_USERCOPY=y <BR>CONFIG_X86_USE_PPRO_CHECKSUM=y <BR>CONFIG_X86_USE_3DNOW=y <BR># CONFIG_HPET_TIMER is not set <BR># CONFIG_HPET_EMULATE_RTC is not set <BR># CONFIG_SMP is not set <BR>CONFIG_PREEMPT=y <BR># CONFIG_X86_UP_APIC is not set <BR>CONFIG_X86_TSC=y <BR>CONFIG_X86_MCE=y <BR># CONFIG_X86_MCE_NONFATAL is not set <BR># CONFIG_TOSHIBA is not set <BR># CONFIG_I8K is not set <BR># CONFIG_MICROCODE is not set <BR># CONFIG_X86_MSR is not set <BR>CONFIG_X86_CPUID=m <BR>CONFIG_EDD=y <BR>CONFIG_NOHIGHMEM=y <BR># CONFIG_HIGHMEM4G is not set <BR># CONFIG_HIGHMEM64G is not set <BR># CONFIG_MATH_EMULATION is not set <BR>CONFIG_MTRR=y <BR># CONFIG_EFI is not set <BR>CONFIG_HAVE_DEC_LOCK=y <BR> <BR># <BR># Power management options (ACPI, APM) <BR># <BR>CONFIG_PM=y <BR># CONFIG_SOFTWARE_SUSPEND is not set <BR># CONFIG_PM_DISK is not set <BR> <BR># <BR># ACPI (Advanced Configuration and Power Interface) Support <BR># <BR>CONFIG_ACPI=y <BR>CONFIG_ACPI_BOOT=y <BR>CONFIG_ACPI_INTERPRETER=y <BR># CONFIG_ACPI_SLEEP is not set <BR># CONFIG_ACPI_AC is not set <BR># CONFIG_ACPI_BATTERY is not set <BR># CONFIG_ACPI_BUTTON is not set <BR>CONFIG_ACPI_FAN=y <BR>CONFIG_ACPI_PROCESSOR=y <BR>CONFIG_ACPI_THERMAL=y <BR># CONFIG_ACPI_ASUS is not set <BR># CONFIG_ACPI_TOSHIBA is not set <BR># CONFIG_ACPI_DEBUG is not set <BR>CONFIG_ACPI_BUS=y <BR>CONFIG_ACPI_EC=y <BR>CONFIG_ACPI_POWER=y <BR>CONFIG_ACPI_PCI=y <BR>CONFIG_ACPI_SYSTEM=y <BR># CONFIG_ACPI_RELAXED_AML is not set <BR> <BR># <BR># APM (Advanced Power Management) BIOS Support <BR># <BR>CONFIG_APM=y <BR># CONFIG_APM_IGNORE_USER_SUSPEND is not set <BR># CONFIG_APM_DO_ENABLE is not set <BR># CONFIG_APM_CPU_IDLE is not set <BR># CONFIG_APM_DISPLAY_BLANK is not set <BR># CONFIG_APM_RTC_IS_GMT is not set <BR># CONFIG_APM_ALLOW_INTS is not set <BR># CONFIG_APM_REAL_MODE_POWER_OFF is not set <BR> <BR># <BR># CPU Frequency scaling <BR># <BR># CONFIG_CPU_FREQ is not set <BR> <BR># <BR># Bus options (PCI, PCMCIA, EISA, MCA, ISA) <BR># <BR>CONFIG_PCI=y <BR># CONFIG_PCI_GOBIOS is not set <BR># CONFIG_PCI_GODIRECT is not set <BR>CONFIG_PCI_GOANY=y <BR>CONFIG_PCI_BIOS=y <BR>CONFIG_PCI_DIRECT=y <BR># CONFIG_PCI_LEGACY_PROC is not set <BR>CONFIG_PCI_NAMES=y <BR># CONFIG_ISA is not set <BR># CONFIG_MCA is not set <BR># CONFIG_SCx200 is not set <BR>CONFIG_HOTPLUG=y <BR> <BR># <BR># PCMCIA/CardBus support <BR># <BR># CONFIG_PCMCIA is not set <BR> <BR># <BR># PCI Hotplug Support <BR># <BR># CONFIG_HOTPLUG_PCI is not set <BR> <BR># <BR># Executable file formats <BR># <BR>CONFIG_BINFMT_ELF=y <BR>CONFIG_BINFMT_AOUT=y <BR>CONFIG_BINFMT_MISC=y <BR> <BR># <BR># Device Drivers <BR># <BR> <BR># <BR># Generic Driver Options <BR># <BR>CONFIG_FW_LOADER=y <BR> <BR># <BR># Memory Technology Devices (MTD) <BR># <BR># CONFIG_MTD is not set <BR> <BR># <BR># Parallel port support <BR># <BR>CONFIG_PARPORT=y <BR>CONFIG_PARPORT_PC=y <BR>CONFIG_PARPORT_PC_CML1=y <BR># CONFIG_PARPORT_SERIAL is not set <BR># CONFIG_PARPORT_PC_FIFO is not set <BR># CONFIG_PARPORT_PC_SUPERIO is not set <BR># CONFIG_PARPORT_OTHER is not set <BR>CONFIG_PARPORT_1284=y <BR> <BR># <BR># Plug and Play support <BR># <BR> <BR># <BR># Block devices <BR># <BR>CONFIG_BLK_DEV_FD=y <BR>CONFIG_PARIDE=y <BR>CONFIG_PARIDE_PARPORT=y <BR> <BR># <BR># Parallel IDE high-level drivers <BR># <BR>CONFIG_PARIDE_PD=m <BR>CONFIG_PARIDE_PCD=m <BR>CONFIG_PARIDE_PF=m <BR>CONFIG_PARIDE_PT=m <BR>CONFIG_PARIDE_PG=m <BR> <BR># <BR># Parallel IDE protocol modules <BR># <BR>CONFIG_PARIDE_ATEN=m <BR>CONFIG_PARIDE_BPCK=m <BR>CONFIG_PARIDE_BPCK6=m <BR>CONFIG_PARIDE_COMM=m <BR>CONFIG_PARIDE_DSTR=m <BR>CONFIG_PARIDE_FIT2=m <BR>CONFIG_PARIDE_FIT3=m <BR>CONFIG_PARIDE_EPAT=m <BR># CONFIG_PARIDE_EPATC8 is not set <BR>CONFIG_PARIDE_EPIA=m <BR>CONFIG_PARIDE_FRIQ=m <BR>CONFIG_PARIDE_FRPW=m <BR>CONFIG_PARIDE_KBIC=m <BR>CONFIG_PARIDE_KTTI=m <BR>CONFIG_PARIDE_ON20=m <BR>CONFIG_PARIDE_ON26=m <BR>CONFIG_BLK_CPQ_DA=m <BR>CONFIG_BLK_CPQ_CISS_DA=m <BR># CONFIG_CISS_SCSI_TAPE is not set <BR>CONFIG_BLK_DEV_DAC960=m <BR>CONFIG_BLK_DEV_UMEM=m <BR>CONFIG_BLK_DEV_LOOP=m <BR>CONFIG_BLK_DEV_CRYPTOLOOP=m <BR>CONFIG_BLK_DEV_NBD=m <BR># CONFIG_BLK_DEV_RAM is not set <BR>CONFIG_BLK_DEV_INITRD=y <BR># CONFIG_LBD is not set <BR> <BR># <BR># ATA/ATAPI/MFM/RLL support <BR># <BR>CONFIG_IDE=y <BR>CONFIG_BLK_DEV_IDE=y <BR> <BR># <BR># Please see Documentation/ide.txt for help/info on IDE drives <BR># <BR># CONFIG_BLK_DEV_HD_IDE is not set <BR>CONFIG_BLK_DEV_IDEDISK=y <BR># CONFIG_IDEDISK_MULTI_MODE is not set <BR># CONFIG_IDEDISK_STROKE is not set <BR>CONFIG_BLK_DEV_IDECD=y <BR>CONFIG_BLK_DEV_IDETAPE=m <BR>CONFIG_BLK_DEV_IDEFLOPPY=y <BR>CONFIG_BLK_DEV_IDESCSI=y <BR># CONFIG_IDE_TASK_IOCTL is not set <BR>CONFIG_IDE_TASKFILE_IO=y <BR> <BR># <BR># IDE chipset support/bugfixes <BR># <BR>CONFIG_IDE_GENERIC=y <BR># CONFIG_BLK_DEV_CMD640 is not set <BR>CONFIG_BLK_DEV_IDEPCI=y <BR>CONFIG_IDEPCI_SHARE_IRQ=y <BR># CONFIG_BLK_DEV_OFFBOARD is not set <BR>CONFIG_BLK_DEV_GENERIC=y <BR># CONFIG_BLK_DEV_OPTI621 is not set <BR># CONFIG_BLK_DEV_RZ1000 is not set <BR>CONFIG_BLK_DEV_IDEDMA_PCI=y <BR># CONFIG_BLK_DEV_IDEDMA_FORCED is not set <BR>CONFIG_IDEDMA_PCI_AUTO=y <BR># CONFIG_IDEDMA_ONLYDISK is not set <BR># CONFIG_IDEDMA_PCI_WIP is not set <BR>CONFIG_BLK_DEV_ADMA=y <BR># CONFIG_BLK_DEV_AEC62XX is not set <BR># CONFIG_BLK_DEV_ALI15X3 is not set <BR>CONFIG_BLK_DEV_AMD74XX=y <BR># CONFIG_BLK_DEV_CMD64X is not set <BR># CONFIG_BLK_DEV_TRIFLEX is not set <BR># CONFIG_BLK_DEV_CY82C693 is not set <BR># CONFIG_BLK_DEV_CS5520 is not set <BR># CONFIG_BLK_DEV_CS5530 is not set <BR># CONFIG_BLK_DEV_HPT34X is not set <BR># CONFIG_BLK_DEV_HPT366 is not set <BR># CONFIG_BLK_DEV_SC1200 is not set <BR># CONFIG_BLK_DEV_PIIX is not set <BR># CONFIG_BLK_DEV_NS87415 is not set <BR>CONFIG_BLK_DEV_PDC202XX_OLD=y <BR>CONFIG_PDC202XX_BURST=y <BR>CONFIG_BLK_DEV_PDC202XX_NEW=y <BR>CONFIG_PDC202XX_FORCE=y <BR># CONFIG_BLK_DEV_SVWKS is not set <BR># CONFIG_BLK_DEV_SIIMAGE is not set <BR># CONFIG_BLK_DEV_SIS5513 is not set <BR># CONFIG_BLK_DEV_SLC90E66 is not set <BR># CONFIG_BLK_DEV_TRM290 is not set <BR>CONFIG_BLK_DEV_VIA82CXXX=y <BR>CONFIG_BLK_DEV_IDEDMA=y <BR># CONFIG_IDEDMA_IVB is not set <BR>CONFIG_IDEDMA_AUTO=y <BR># CONFIG_DMA_NONPCI is not set <BR># CONFIG_BLK_DEV_HD is not set <BR> <BR># <BR># SCSI device support <BR># <BR>CONFIG_SCSI=y <BR>CONFIG_SCSI_PROC_FS=y <BR> <BR># <BR># SCSI support type (disk, tape, CD-ROM) <BR># <BR>CONFIG_BLK_DEV_SD=y <BR># CONFIG_CHR_DEV_ST is not set <BR># CONFIG_CHR_DEV_OSST is not set <BR>CONFIG_BLK_DEV_SR=y <BR># CONFIG_BLK_DEV_SR_VENDOR is not set <BR>CONFIG_CHR_DEV_SG=y <BR> <BR># <BR># Some SCSI devices (e.g. CD jukebox) support multiple LUNs <BR># <BR># CONFIG_SCSI_MULTI_LUN is not set <BR># CONFIG_SCSI_REPORT_LUNS is not set <BR># CONFIG_SCSI_CONSTANTS is not set <BR># CONFIG_SCSI_LOGGING is not set <BR> <BR># <BR># SCSI low-level drivers <BR># <BR># CONFIG_BLK_DEV_3W_XXXX_RAID is not set <BR># CONFIG_SCSI_ACARD is not set <BR># CONFIG_SCSI_AACRAID is not set <BR># CONFIG_SCSI_AIC7XXX is not set <BR># CONFIG_SCSI_AIC7XXX_OLD is not set <BR># CONFIG_SCSI_AIC79XX is not set <BR># CONFIG_SCSI_ADVANSYS is not set <BR># CONFIG_SCSI_MEGARAID is not set <BR># CONFIG_SCSI_SATA is not set <BR># CONFIG_SCSI_BUSLOGIC is not set <BR># CONFIG_SCSI_CPQFCTS is not set <BR># CONFIG_SCSI_DMX3191D is not set <BR># CONFIG_SCSI_EATA is not set <BR># CONFIG_SCSI_EATA_PIO is not set <BR># CONFIG_SCSI_FUTURE_DOMAIN is not set <BR># CONFIG_SCSI_GDTH is not set <BR># CONFIG_SCSI_IPS is not set <BR># CONFIG_SCSI_INIA100 is not set <BR>CONFIG_SCSI_PPA=y <BR>CONFIG_SCSI_IMM=y <BR>CONFIG_SCSI_IZIP_EPP16=y <BR># CONFIG_SCSI_IZIP_SLOW_CTR is not set <BR># CONFIG_SCSI_SYM53C8XX_2 is not set <BR># CONFIG_SCSI_QLOGIC_ISP is not set <BR># CONFIG_SCSI_QLOGIC_FC is not set <BR># CONFIG_SCSI_QLOGIC_1280 is not set <BR>CONFIG_SCSI_QLA2XXX_CONFIG=y <BR># CONFIG_SCSI_QLA21XX is not set <BR># CONFIG_SCSI_QLA22XX is not set <BR># CONFIG_SCSI_QLA23XX is not set <BR># CONFIG_SCSI_DC395x is not set <BR># CONFIG_SCSI_DC390T is not set <BR># CONFIG_SCSI_NSP32 is not set <BR># CONFIG_SCSI_DEBUG is not set <BR> <BR># <BR># Multi-device support (RAID and LVM) <BR># <BR>CONFIG_MD=y <BR>CONFIG_BLK_DEV_MD=y <BR>CONFIG_MD_LINEAR=m <BR>CONFIG_MD_RAID0=y <BR>CONFIG_MD_RAID1=y <BR># CONFIG_MD_RAID5 is not set <BR># CONFIG_MD_RAID6 is not set <BR># CONFIG_MD_MULTIPATH is not set <BR># CONFIG_BLK_DEV_DM is not set <BR> <BR># <BR># Fusion MPT device support <BR># <BR># CONFIG_FUSION is not set <BR> <BR># <BR># IEEE 1394 (FireWire) support (EXPERIMENTAL) <BR># <BR>CONFIG_IEEE1394=y <BR> <BR># <BR># Subsystem Options <BR># <BR># CONFIG_IEEE1394_VERBOSEDEBUG is not set <BR># CONFIG_IEEE1394_OUI_DB is not set <BR> <BR># <BR># Device Drivers <BR># <BR># CONFIG_IEEE1394_PCILYNX is not set <BR>CONFIG_IEEE1394_OHCI1394=y <BR> <BR># <BR># Protocol Drivers <BR># <BR>CONFIG_IEEE1394_VIDEO1394=m <BR>CONFIG_IEEE1394_SBP2=m <BR># CONFIG_IEEE1394_SBP2_PHYS_DMA is not set <BR> <BR># CONFIG_IEEE1394_ETH1394 is not set <BR>CONFIG_IEEE1394_DV1394=m <BR>CONFIG_IEEE1394_RAWIO=m <BR>CONFIG_IEEE1394_CMP=m <BR>CONFIG_IEEE1394_AMDTP=m <BR> <BR># <BR># I2O device support <BR># <BR>CONFIG_I2O=m <BR>CONFIG_I2O_PCI=m <BR>CONFIG_I2O_BLOCK=m <BR>CONFIG_I2O_SCSI=m <BR>CONFIG_I2O_PROC=m <BR> <BR># <BR># Networking support <BR># <BR>CONFIG_NET=y <BR> <BR># <BR># Networking options <BR># <BR>CONFIG_PACKET=y <BR># CONFIG_PACKET_MMAP is not set <BR>CONFIG_NETLINK_DEV=m <BR>CONFIG_UNIX=y <BR># CONFIG_NET_KEY is not set <BR>CONFIG_INET=y <BR># CONFIG_IP_MULTICAST is not set <BR># CONFIG_IP_ADVANCED_ROUTER is not set <BR># CONFIG_IP_PNP is not set <BR>CONFIG_NET_IPIP=m <BR>CONFIG_NET_IPGRE=m <BR># CONFIG_ARPD is not set <BR># CONFIG_INET_ECN is not set <BR>CONFIG_SYN_COOKIES=y <BR>CONFIG_INET_AH=y <BR>CONFIG_INET_ESP=y <BR>CONFIG_INET_IPCOMP=y <BR> <BR># <BR># IP: Virtual Server Configuration <BR># <BR># CONFIG_IP_VS is not set <BR># CONFIG_IPV6 is not set <BR>CONFIG_DECNET=m <BR># CONFIG_DECNET_SIOCGIFCONF is not set <BR># CONFIG_DECNET_ROUTER is not set <BR># CONFIG_BRIDGE is not set <BR>CONFIG_NETFILTER=y <BR># CONFIG_NETFILTER_DEBUG is not set <BR> <BR># <BR># IP: Netfilter Configuration <BR># <BR>CONFIG_IP_NF_CONNTRACK=m <BR>CONFIG_IP_NF_FTP=m <BR>CONFIG_IP_NF_IRC=m <BR>CONFIG_IP_NF_TFTP=m <BR>CONFIG_IP_NF_AMANDA=m <BR>CONFIG_IP_NF_QUEUE=m <BR>CONFIG_IP_NF_IPTABLES=m <BR>CONFIG_IP_NF_MATCH_LIMIT=m <BR>CONFIG_IP_NF_MATCH_IPRANGE=m <BR>CONFIG_IP_NF_MATCH_MAC=m <BR>CONFIG_IP_NF_MATCH_PKTTYPE=m <BR>CONFIG_IP_NF_MATCH_MARK=m <BR>CONFIG_IP_NF_MATCH_MULTIPORT=m <BR>CONFIG_IP_NF_MATCH_TOS=m <BR>CONFIG_IP_NF_MATCH_RECENT=m <BR>CONFIG_IP_NF_MATCH_ECN=m <BR>CONFIG_IP_NF_MATCH_DSCP=m <BR>CONFIG_IP_NF_MATCH_AH_ESP=m <BR>CONFIG_IP_NF_MATCH_LENGTH=m <BR>CONFIG_IP_NF_MATCH_TTL=m <BR>CONFIG_IP_NF_MATCH_TCPMSS=m <BR>CONFIG_IP_NF_MATCH_HELPER=m <BR>CONFIG_IP_NF_MATCH_STATE=m <BR>CONFIG_IP_NF_MATCH_CONNTRACK=m <BR>CONFIG_IP_NF_MATCH_OWNER=m <BR>CONFIG_IP_NF_FILTER=m <BR>CONFIG_IP_NF_TARGET_REJECT=m <BR>CONFIG_IP_NF_NAT=m <BR>CONFIG_IP_NF_NAT_NEEDED=y <BR>CONFIG_IP_NF_TARGET_MASQUERADE=m <BR>CONFIG_IP_NF_TARGET_REDIRECT=m <BR>CONFIG_IP_NF_TARGET_NETMAP=m <BR>CONFIG_IP_NF_TARGET_SAME=m <BR># CONFIG_IP_NF_NAT_LOCAL is not set <BR>CONFIG_IP_NF_NAT_SNMP_BASIC=m <BR>CONFIG_IP_NF_NAT_IRC=m <BR>CONFIG_IP_NF_NAT_FTP=m <BR>CONFIG_IP_NF_NAT_TFTP=m <BR>CONFIG_IP_NF_NAT_AMANDA=m <BR>CONFIG_IP_NF_MANGLE=m <BR>CONFIG_IP_NF_TARGET_TOS=m <BR>CONFIG_IP_NF_TARGET_ECN=m <BR>CONFIG_IP_NF_TARGET_DSCP=m <BR>CONFIG_IP_NF_TARGET_MARK=m <BR>CONFIG_IP_NF_TARGET_CLASSIFY=m <BR>CONFIG_IP_NF_TARGET_LOG=m <BR>CONFIG_IP_NF_TARGET_ULOG=m <BR>CONFIG_IP_NF_TARGET_TCPMSS=m <BR>CONFIG_IP_NF_ARPTABLES=m <BR>CONFIG_IP_NF_ARPFILTER=m <BR>CONFIG_IP_NF_ARP_MANGLE=m <BR>CONFIG_IP_NF_COMPAT_IPCHAINS=m <BR>CONFIG_IP_NF_COMPAT_IPFWADM=m <BR> <BR># <BR># DECnet: Netfilter Configuration <BR># <BR># CONFIG_DECNET_NF_GRABULATOR is not set <BR>CONFIG_XFRM=y <BR>CONFIG_XFRM_USER=y <BR> <BR># <BR># SCTP Configuration (EXPERIMENTAL) <BR># <BR>CONFIG_IPV6_SCTP__=y <BR># CONFIG_IP_SCTP is not set <BR># CONFIG_ATM is not set <BR>CONFIG_VLAN_8021Q=m <BR>CONFIG_LLC=m <BR># CONFIG_LLC2 is not set <BR># CONFIG_IPX is not set <BR>CONFIG_ATALK=m <BR># CONFIG_DEV_APPLETALK is not set <BR># CONFIG_X25 is not set <BR># CONFIG_LAPB is not set <BR># CONFIG_NET_DIVERT is not set <BR># CONFIG_ECONET is not set <BR>CONFIG_WAN_ROUTER=m <BR># CONFIG_NET_FASTROUTE is not set <BR># CONFIG_NET_HW_FLOWCONTROL is not set <BR> <BR># <BR># QoS and/or fair queueing <BR># <BR># CONFIG_NET_SCHED is not set <BR> <BR># <BR># Network testing <BR># <BR># CONFIG_NET_PKTGEN is not set <BR>CONFIG_NETDEVICES=y <BR> <BR># <BR># ARCnet devices <BR># <BR># CONFIG_ARCNET is not set <BR>CONFIG_DUMMY=m <BR># CONFIG_BONDING is not set <BR># CONFIG_EQUALIZER is not set <BR>CONFIG_TUN=m <BR># CONFIG_ETHERTAP is not set <BR> <BR># <BR># Ethernet (10 or 100Mbit) <BR># <BR>CONFIG_NET_ETHERNET=y <BR>CONFIG_MII=y <BR># CONFIG_HAPPYMEAL is not set <BR># CONFIG_SUNGEM is not set <BR># CONFIG_NET_VENDOR_3COM is not set <BR> <BR># <BR># Tulip family network device support <BR># <BR># CONFIG_NET_TULIP is not set <BR># CONFIG_HP100 is not set <BR>CONFIG_NET_PCI=y <BR># CONFIG_PCNET32 is not set <BR># CONFIG_AMD8111_ETH is not set <BR># CONFIG_ADAPTEC_STARFIRE is not set <BR># CONFIG_B44 is not set <BR># CONFIG_FORCEDETH is not set <BR># CONFIG_DGRS is not set <BR># CONFIG_EEPRO100 is not set <BR># CONFIG_E100 is not set <BR># CONFIG_FEALNX is not set <BR># CONFIG_NATSEMI is not set <BR># CONFIG_NE2K_PCI is not set <BR>CONFIG_8139CP=m <BR>CONFIG_8139TOO=y <BR># CONFIG_8139TOO_PIO is not set <BR>CONFIG_8139TOO_TUNE_TWISTER=y <BR>CONFIG_8139TOO_8129=y <BR># CONFIG_8139_OLD_RX_RESET is not set <BR># CONFIG_SIS900 is not set <BR># CONFIG_EPIC100 is not set <BR># CONFIG_SUNDANCE is not set <BR># CONFIG_TLAN is not set <BR># CONFIG_VIA_RHINE is not set <BR> <BR># <BR># Ethernet (1000 Mbit) <BR># <BR># CONFIG_ACENIC is not set <BR># CONFIG_DL2K is not set <BR># CONFIG_E1000 is not set <BR># CONFIG_NS83820 is not set <BR># CONFIG_HAMACHI is not set <BR># CONFIG_YELLOWFIN is not set <BR># CONFIG_R8169 is not set <BR># CONFIG_SIS190 is not set <BR># CONFIG_SK98LIN is not set <BR># CONFIG_TIGON3 is not set <BR> <BR># <BR># Ethernet (10000 Mbit) <BR># <BR># CONFIG_IXGB is not set <BR># CONFIG_FDDI is not set <BR># CONFIG_HIPPI is not set <BR># CONFIG_PLIP is not set <BR>CONFIG_PPP=y <BR># CONFIG_PPP_MULTILINK is not set <BR># CONFIG_PPP_FILTER is not set <BR>CONFIG_PPP_ASYNC=y <BR>CONFIG_PPP_SYNC_TTY=y <BR>CONFIG_PPP_DEFLATE=y <BR>CONFIG_PPP_BSDCOMP=y <BR>CONFIG_PPPOE=y <BR>CONFIG_SLIP=y <BR>CONFIG_SLIP_COMPRESSED=y <BR>CONFIG_SLIP_SMART=y <BR># CONFIG_SLIP_MODE_SLIP6 is not set <BR> <BR># <BR># Wireless LAN (non-hamradio) <BR># <BR># CONFIG_NET_RADIO is not set <BR> <BR># <BR># Token Ring devices <BR># <BR># CONFIG_TR is not set <BR>CONFIG_NET_FC=y <BR>CONFIG_RCPCI=m <BR>CONFIG_SHAPER=m <BR> <BR># <BR># Wan interfaces <BR># <BR># CONFIG_WAN is not set <BR> <BR># <BR># Amateur Radio support <BR># <BR># CONFIG_HAMRADIO is not set <BR> <BR># <BR># IrDA (infrared) support <BR># <BR># CONFIG_IRDA is not set <BR> <BR># <BR># Bluetooth support <BR># <BR># CONFIG_BT is not set <BR> <BR># <BR># ISDN subsystem <BR># <BR># CONFIG_ISDN_BOOL is not set <BR> <BR># <BR># Telephony Support <BR># <BR># CONFIG_PHONE is not set <BR> <BR># <BR># Input device support <BR># <BR>CONFIG_INPUT=y <BR> <BR># <BR># Userland interfaces <BR># <BR>CONFIG_INPUT_MOUSEDEV=y <BR>CONFIG_INPUT_MOUSEDEV_PSAUX=y <BR>CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 <BR>CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 <BR>CONFIG_INPUT_JOYDEV=m <BR># CONFIG_INPUT_TSDEV is not set <BR>CONFIG_INPUT_EVDEV=y <BR># CONFIG_INPUT_EVBUG is not set <BR> <BR># <BR># Input I/O drivers <BR># <BR>CONFIG_GAMEPORT=y <BR>CONFIG_SOUND_GAMEPORT=y <BR># CONFIG_GAMEPORT_NS558 is not set <BR># CONFIG_GAMEPORT_L4 is not set <BR>CONFIG_GAMEPORT_EMU10K1=y <BR># CONFIG_GAMEPORT_VORTEX is not set <BR># CONFIG_GAMEPORT_FM801 is not set <BR># CONFIG_GAMEPORT_CS461x is not set <BR>CONFIG_SERIO=y <BR>CONFIG_SERIO_I8042=y <BR># CONFIG_SERIO_SERPORT is not set <BR># CONFIG_SERIO_CT82C710 is not set <BR># CONFIG_SERIO_PARKBD is not set <BR># CONFIG_SERIO_PCIPS2 is not set <BR> <BR># <BR># Input Device Drivers <BR># <BR>CONFIG_INPUT_KEYBOARD=y <BR>CONFIG_KEYBOARD_ATKBD=y <BR># CONFIG_KEYBOARD_SUNKBD is not set <BR># CONFIG_KEYBOARD_XTKBD is not set <BR># CONFIG_KEYBOARD_NEWTON is not set <BR>CONFIG_INPUT_MOUSE=y <BR>CONFIG_MOUSE_PS2=y <BR># CONFIG_MOUSE_SERIAL is not set <BR># CONFIG_INPUT_JOYSTICK is not set <BR># CONFIG_INPUT_TOUCHSCREEN is not set <BR>CONFIG_INPUT_MISC=y <BR>CONFIG_INPUT_PCSPKR=y <BR>CONFIG_INPUT_UINPUT=m <BR> <BR># <BR># Character devices <BR># <BR>CONFIG_VT=y <BR>CONFIG_VT_CONSOLE=y <BR>CONFIG_HW_CONSOLE=y <BR># CONFIG_SERIAL_NONSTANDARD is not set <BR> <BR># <BR># Serial drivers <BR># <BR>CONFIG_SERIAL_8250=y <BR># CONFIG_SERIAL_8250_CONSOLE is not set <BR># CONFIG_SERIAL_8250_ACPI is not set <BR>CONFIG_SERIAL_8250_NR_UARTS=4 <BR># CONFIG_SERIAL_8250_EXTENDED is not set <BR> <BR># <BR># Non-8250 serial port support <BR># <BR>CONFIG_SERIAL_CORE=y <BR>CONFIG_UNIX98_PTYS=y <BR>CONFIG_UNIX98_PTY_COUNT=256 <BR>CONFIG_PRINTER=m <BR># CONFIG_LP_CONSOLE is not set <BR>CONFIG_PPDEV=m <BR># CONFIG_TIPAR is not set <BR> <BR># <BR># Mice <BR># <BR>CONFIG_BUSMOUSE=y <BR># CONFIG_QIC02_TAPE is not set <BR> <BR># <BR># IPMI <BR># <BR>CONFIG_IPMI_HANDLER=m <BR># CONFIG_IPMI_PANIC_EVENT is not set <BR>CONFIG_IPMI_DEVICE_INTERFACE=m <BR>CONFIG_IPMI_KCS=m <BR>CONFIG_IPMI_WATCHDOG=m <BR> <BR># <BR># Watchdog Cards <BR># <BR># CONFIG_WATCHDOG is not set <BR>CONFIG_HW_RANDOM=m <BR>CONFIG_NVRAM=m <BR>CONFIG_RTC=m <BR>CONFIG_GEN_RTC=m <BR># CONFIG_GEN_RTC_X is not set <BR># CONFIG_DTLK is not set <BR># CONFIG_R3964 is not set <BR># CONFIG_APPLICOM is not set <BR># CONFIG_SONYPI is not set <BR> <BR># <BR># Ftape, the floppy tape device driver <BR># <BR># CONFIG_FTAPE is not set <BR>CONFIG_AGP=y <BR># CONFIG_AGP_ALI is not set <BR># CONFIG_AGP_ATI is not set <BR># CONFIG_AGP_AMD is not set <BR># CONFIG_AGP_AMD64 is not set <BR># CONFIG_AGP_INTEL is not set <BR># CONFIG_AGP_NVIDIA is not set <BR># CONFIG_AGP_SIS is not set <BR># CONFIG_AGP_SWORKS is not set <BR>CONFIG_AGP_VIA=y <BR>CONFIG_DRM=y <BR># CONFIG_DRM_TDFX is not set <BR># CONFIG_DRM_GAMMA is not set <BR># CONFIG_DRM_R128 is not set <BR>CONFIG_DRM_RADEON=y <BR># CONFIG_DRM_MGA is not set <BR># CONFIG_DRM_SIS is not set <BR># CONFIG_MWAVE is not set <BR>CONFIG_RAW_DRIVER=y <BR>CONFIG_MAX_RAW_DEVS=256 <BR># CONFIG_HANGCHECK_TIMER is not set <BR> <BR># <BR># I2C support <BR># <BR>CONFIG_I2C=m <BR>CONFIG_I2C_CHARDEV=m <BR> <BR># <BR># I2C Algorithms <BR># <BR>CONFIG_I2C_ALGOBIT=m <BR># CONFIG_I2C_ALGOPCF is not set <BR> <BR># <BR># I2C Hardware Bus support <BR># <BR># CONFIG_I2C_ALI1535 is not set <BR># CONFIG_I2C_ALI15X3 is not set <BR># CONFIG_I2C_AMD756 is not set <BR># CONFIG_I2C_AMD8111 is not set <BR># CONFIG_I2C_ELV is not set <BR># CONFIG_I2C_I801 is not set <BR># CONFIG_I2C_I810 is not set <BR>CONFIG_I2C_ISA=m <BR># CONFIG_I2C_NFORCE2 is not set <BR># CONFIG_I2C_PHILIPSPAR is not set <BR># CONFIG_I2C_PARPORT is not set <BR># CONFIG_I2C_PARPORT_LIGHT is not set <BR># CONFIG_I2C_PIIX4 is not set <BR># CONFIG_I2C_PROSAVAGE is not set <BR># CONFIG_I2C_SAVAGE4 is not set <BR># CONFIG_SCx200_ACB is not set <BR># CONFIG_I2C_SIS5595 is not set <BR># CONFIG_I2C_SIS630 is not set <BR># CONFIG_I2C_SIS96X is not set <BR># CONFIG_I2C_VELLEMAN is not set <BR>CONFIG_I2C_VIA=m <BR>CONFIG_I2C_VIAPRO=m <BR># CONFIG_I2C_VOODOO3 is not set <BR> <BR># <BR># I2C Hardware Sensors Chip support <BR># <BR>CONFIG_I2C_SENSOR=m <BR># CONFIG_SENSORS_ADM1021 is not set <BR># CONFIG_SENSORS_ASB100 is not set <BR># CONFIG_SENSORS_EEPROM is not set <BR># CONFIG_SENSORS_IT87 is not set <BR># CONFIG_SENSORS_LM75 is not set <BR># CONFIG_SENSORS_LM78 is not set <BR># CONFIG_SENSORS_LM83 is not set <BR># CONFIG_SENSORS_LM85 is not set <BR># CONFIG_SENSORS_LM90 is not set <BR>CONFIG_SENSORS_VIA686A=m <BR># CONFIG_SENSORS_W83781D is not set <BR># CONFIG_SENSORS_W83L785TS is not set <BR># CONFIG_I2C_DEBUG_CORE is not set <BR># CONFIG_I2C_DEBUG_BUS is not set <BR># CONFIG_I2C_DEBUG_CHIP is not set <BR> <BR># <BR># Multimedia devices <BR># <BR>CONFIG_VIDEO_DEV=m <BR> <BR># <BR># Video For Linux <BR># <BR> <BR># <BR># Video Adapters <BR># <BR>CONFIG_VIDEO_BT848=m <BR>CONFIG_VIDEO_BWQCAM=m <BR>CONFIG_VIDEO_CQCAM=m <BR>CONFIG_VIDEO_W9966=m <BR>CONFIG_VIDEO_CPIA=m <BR>CONFIG_VIDEO_CPIA_PP=m <BR>CONFIG_VIDEO_CPIA_USB=m <BR>CONFIG_VIDEO_SAA5249=m <BR>CONFIG_TUNER_3036=m <BR>CONFIG_VIDEO_STRADIS=m <BR>CONFIG_VIDEO_ZORAN=m <BR>CONFIG_VIDEO_ZORAN_BUZ=m <BR>CONFIG_VIDEO_ZORAN_DC10=m <BR>CONFIG_VIDEO_ZORAN_DC30=m <BR>CONFIG_VIDEO_ZORAN_LML33=m <BR>CONFIG_VIDEO_ZORAN_LML33R10=m <BR>CONFIG_VIDEO_SAA7134=m <BR>CONFIG_VIDEO_MXB=m <BR>CONFIG_VIDEO_DPC=m <BR>CONFIG_VIDEO_HEXIUM_ORION=m <BR>CONFIG_VIDEO_HEXIUM_GEMINI=m <BR>CONFIG_VIDEO_CX88=m <BR> <BR># <BR># Radio Adapters <BR># <BR># CONFIG_RADIO_GEMTEK_PCI is not set <BR># CONFIG_RADIO_MAXIRADIO is not set <BR># CONFIG_RADIO_MAESTRO is not set <BR> <BR># <BR># Digital Video Broadcasting Devices <BR># <BR># CONFIG_DVB is not set <BR>CONFIG_VIDEO_SAA7146=m <BR>CONFIG_VIDEO_SAA7146_VV=m <BR>CONFIG_VIDEO_VIDEOBUF=m <BR>CONFIG_VIDEO_TUNER=m <BR>CONFIG_VIDEO_BUF=m <BR>CONFIG_VIDEO_BTCX=m <BR>CONFIG_VIDEO_IR=m <BR> <BR># <BR># Graphics support <BR># <BR>CONFIG_FB=y <BR># CONFIG_FB_CYBER2000 is not set <BR># CONFIG_FB_IMSTT is not set <BR># CONFIG_FB_VGA16 is not set <BR>CONFIG_FB_VESA=y <BR>CONFIG_VIDEO_SELECT=y <BR># CONFIG_FB_HGA is not set <BR># CONFIG_FB_RIVA is not set <BR># CONFIG_FB_MATROX is not set <BR>CONFIG_FB_RADEON=y <BR># CONFIG_FB_ATY128 is not set <BR># CONFIG_FB_ATY is not set <BR># CONFIG_FB_SIS is not set <BR># CONFIG_FB_NEOMAGIC is not set <BR># CONFIG_FB_KYRO is not set <BR># CONFIG_FB_3DFX is not set <BR># CONFIG_FB_VOODOO1 is not set <BR># CONFIG_FB_TRIDENT is not set <BR># CONFIG_FB_VIRTUAL is not set <BR> <BR># <BR># Console display driver support <BR># <BR>CONFIG_VGA_CONSOLE=y <BR># CONFIG_MDA_CONSOLE is not set <BR>CONFIG_DUMMY_CONSOLE=y <BR>CONFIG_FRAMEBUFFER_CONSOLE=y <BR>CONFIG_PCI_CONSOLE=y <BR>CONFIG_FONTS=y <BR>CONFIG_FONT_8x8=y <BR>CONFIG_FONT_8x16=y <BR># CONFIG_FONT_6x11 is not set <BR># CONFIG_FONT_PEARL_8x8 is not set <BR># CONFIG_FONT_ACORN_8x8 is not set <BR># CONFIG_FONT_MINI_4x6 is not set <BR># CONFIG_FONT_SUN8x16 is not set <BR># CONFIG_FONT_SUN12x22 is not set <BR> <BR># <BR># Logo configuration <BR># <BR>CONFIG_LOGO=y <BR># CONFIG_LOGO_LINUX_MONO is not set <BR># CONFIG_LOGO_LINUX_VGA16 is not set <BR>CONFIG_LOGO_LINUX_CLUT224=y <BR> <BR># <BR># Sound <BR># <BR>CONFIG_SOUND=y <BR> <BR># <BR># Advanced Linux Sound Architecture <BR># <BR>CONFIG_SND=y <BR>CONFIG_SND_SEQUENCER=y <BR># CONFIG_SND_SEQ_DUMMY is not set <BR>CONFIG_SND_OSSEMUL=y <BR>CONFIG_SND_MIXER_OSS=m <BR>CONFIG_SND_PCM_OSS=m <BR>CONFIG_SND_SEQUENCER_OSS=y <BR>CONFIG_SND_RTCTIMER=m <BR># CONFIG_SND_VERBOSE_PRINTK is not set <BR># CONFIG_SND_DEBUG is not set <BR> <BR># <BR># Generic devices <BR># <BR># CONFIG_SND_DUMMY is not set <BR># CONFIG_SND_VIRMIDI is not set <BR># CONFIG_SND_MTPAV is not set <BR># CONFIG_SND_SERIAL_U16550 is not set <BR># CONFIG_SND_MPU401 is not set <BR> <BR># <BR># PCI devices <BR> <BR># <BR># CONFIG_SND_ALI5451 is not set <BR># CONFIG_SND_AZT3328 is not set <BR># CONFIG_SND_CS46XX is not set <BR># CONFIG_SND_CS4281 is not set <BR>CONFIG_SND_EMU10K1=y <BR># CONFIG_SND_KORG1212 is not set <BR># CONFIG_SND_NM256 is not set <BR># CONFIG_SND_RME32 is not set <BR># CONFIG_SND_RME96 is not set <BR># CONFIG_SND_RME9652 is not set <BR># CONFIG_SND_HDSP is not set <BR># CONFIG_SND_TRIDENT is not set <BR># CONFIG_SND_YMFPCI is not set <BR># CONFIG_SND_ALS4000 is not set <BR># CONFIG_SND_CMIPCI is not set <BR># CONFIG_SND_ENS1370 is not set <BR># CONFIG_SND_ENS1371 is not set <BR># CONFIG_SND_ES1938 is not set <BR># CONFIG_SND_ES1968 is not set <BR># CONFIG_SND_MAESTRO3 is not set <BR># CONFIG_SND_FM801 is not set <BR># CONFIG_SND_ICE1712 is not set <BR># CONFIG_SND_ICE1724 is not set <BR># CONFIG_SND_INTEL8X0 is not set <BR># CONFIG_SND_SONICVIBES is not set <BR># CONFIG_SND_VIA82XX is not set <BR># CONFIG_SND_VX222 is not set <BR> <BR># <BR># ALSA USB devices <BR># <BR>CONFIG_SND_USB_AUDIO=m <BR> <BR># <BR># Open Sound System <BR># <BR># CONFIG_SOUND_PRIME is not set <BR> <BR># <BR># USB support <BR># <BR>CONFIG_USB=y <BR># CONFIG_USB_DEBUG is not set <BR> <BR># <BR># Miscellaneous USB options <BR># <BR>CONFIG_USB_DEVICEFS=y <BR>CONFIG_USB_BANDWIDTH=y <BR># CONFIG_USB_DYNAMIC_MINORS is not set <BR> <BR># <BR># USB Host Controller Drivers <BR># <BR>CONFIG_USB_EHCI_HCD=y <BR># CONFIG_USB_OHCI_HCD is not set <BR>CONFIG_USB_UHCI_HCD=y <BR> <BR># <BR># USB Device Class drivers <BR># <BR>CONFIG_USB_AUDIO=m <BR># CONFIG_USB_BLUETOOTH_TTY is not set <BR>CONFIG_USB_MIDI=m <BR># CONFIG_USB_ACM is not set <BR>CONFIG_USB_PRINTER=y <BR>CONFIG_USB_STORAGE=y <BR># CONFIG_USB_STORAGE_DEBUG is not set <BR># CONFIG_USB_STORAGE_DATAFAB is not set <BR># CONFIG_USB_STORAGE_FREECOM is not set <BR>CONFIG_USB_STORAGE_ISD200=y <BR># CONFIG_USB_STORAGE_DPCM is not set <BR># CONFIG_USB_STORAGE_HP8200e is not set <BR># CONFIG_USB_STORAGE_SDDR09 is not set <BR># CONFIG_USB_STORAGE_SDDR55 is not set <BR># CONFIG_USB_STORAGE_JUMPSHOT is not set <BR> <BR># <BR># USB Human Interface Devices (HID) <BR># <BR>CONFIG_USB_HID=y <BR>CONFIG_USB_HIDINPUT=y <BR># CONFIG_HID_FF is not set <BR>CONFIG_USB_HIDDEV=y <BR># CONFIG_USB_AIPTEK is not set <BR># CONFIG_USB_WACOM is not set <BR># CONFIG_USB_KBTAB is not set <BR># CONFIG_USB_POWERMATE is not set <BR># CONFIG_USB_XPAD is not set <BR> <BR># <BR># USB Imaging devices <BR># <BR># CONFIG_USB_MDC800 is not set <BR># CONFIG_USB_SCANNER is not set <BR># CONFIG_USB_MICROTEK is not set <BR># CONFIG_USB_HPUSBSCSI is not set <BR> <BR># <BR># USB Multimedia devices <BR># <BR># CONFIG_USB_DABUSB is not set <BR># CONFIG_USB_VICAM is not set <BR># CONFIG_USB_DSBR is not set <BR># CONFIG_USB_IBMCAM is not set <BR>CONFIG_USB_KONICAWC=m <BR>CONFIG_USB_OV511=m <BR>CONFIG_USB_PWC=m <BR>CONFIG_USB_SE401=m <BR>CONFIG_USB_STV680=m <BR>CONFIG_USB_W9968CF=m <BR> <BR># <BR># USB Network adaptors <BR># <BR># CONFIG_USB_CATC is not set <BR># CONFIG_USB_KAWETH is not set <BR># CONFIG_USB_PEGASUS is not set <BR>CONFIG_USB_RTL8150=m <BR># CONFIG_USB_USBNET is not set <BR> <BR># <BR># USB port drivers <BR># <BR>CONFIG_USB_USS720=m <BR> <BR># <BR># USB Serial Converter support <BR># <BR># CONFIG_USB_SERIAL is not set <BR> <BR># <BR># USB Miscellaneous drivers <BR># <BR># CONFIG_USB_EMI62 is not set <BR># CONFIG_USB_EMI26 is not set <BR># CONFIG_USB_TIGL is not set <BR># CONFIG_USB_AUERSWALD is not set <BR># CONFIG_USB_RIO500 is not set <BR># CONFIG_USB_LEGOTOWER is not set <BR># CONFIG_USB_BRLVGER is not set <BR># CONFIG_USB_LCD is not set <BR># CONFIG_USB_LED is not set <BR># CONFIG_USB_TEST is not set <BR> <BR># <BR># USB Gadget Support <BR># <BR># CONFIG_USB_GADGET is not set <BR> <BR># <BR># File systems <BR># <BR>CONFIG_EXT2_FS=y <BR># CONFIG_EXT2_FS_XATTR is not set <BR>CONFIG_EXT3_FS=y <BR>CONFIG_EXT3_FS_XATTR=y <BR># CONFIG_EXT3_FS_POSIX_ACL is not set <BR># CONFIG_EXT3_FS_SECURITY is not set <BR>CONFIG_JBD=y <BR># CONFIG_JBD_DEBUG is not set <BR>CONFIG_FS_MBCACHE=y <BR>CONFIG_REISERFS_FS=y <BR># CONFIG_REISERFS_CHECK is not set <BR># CONFIG_REISERFS_PROC_INFO is not set <BR># CONFIG_JFS_FS is not set <BR># CONFIG_XFS_FS is not set <BR># CONFIG_MINIX_FS is not set <BR># CONFIG_ROMFS_FS is not set <BR># CONFIG_QUOTA is not set <BR>CONFIG_AUTOFS_FS=y <BR>CONFIG_AUTOFS4_FS=y <BR> <BR># <BR># CD-ROM/DVD Filesystems <BR># <BR>CONFIG_ISO9660_FS=y <BR>CONFIG_JOLIET=y <BR>CONFIG_ZISOFS=y <BR>CONFIG_ZISOFS_FS=y <BR>CONFIG_UDF_FS=y <BR> <BR># <BR># DOS/FAT/NT Filesystems <BR># <BR>CONFIG_FAT_FS=y <BR>CONFIG_MSDOS_FS=y <BR>CONFIG_VFAT_FS=y <BR>CONFIG_NTFS_FS=y <BR># CONFIG_NTFS_DEBUG is not set <BR># CONFIG_NTFS_RW is not set <BR> <BR># <BR># Pseudo filesystems <BR># <BR>CONFIG_PROC_FS=y <BR>CONFIG_PROC_KCORE=y <BR># CONFIG_DEVFS_FS is not set <BR>CONFIG_DEVPTS_FS=y <BR># CONFIG_DEVPTS_FS_XATTR is not set <BR>CONFIG_TMPFS=y <BR># CONFIG_HUGETLBFS is not set <BR># CONFIG_HUGETLB_PAGE is not set <BR>CONFIG_RAMFS=y <BR>CONFIG_SUPERMOUNT=y <BR># CONFIG_SUPERMOUNT_DEBUG is not set <BR> <BR># <BR># Miscellaneous filesystems <BR># <BR># CONFIG_ADFS_FS is not set <BR># CONFIG_AFFS_FS is not set <BR># CONFIG_HFS_FS is not set <BR># CONFIG_BEFS_FS is not set <BR># CONFIG_BFS_FS is not set <BR># CONFIG_EFS_FS is not set <BR># CONFIG_CRAMFS is not set <BR># CONFIG_VXFS_FS is not set <BR># CONFIG_HPFS_FS is not set <BR># CONFIG_QNX4FS_FS is not set <BR># CONFIG_SYSV_FS is not set <BR># CONFIG_UFS_FS is not set <BR> <BR># <BR># Network File Systems <BR># <BR>CONFIG_NFS_FS=y <BR>CONFIG_NFS_V3=y <BR># CONFIG_NFS_V4 is not set <BR># CONFIG_NFS_DIRECTIO is not set <BR>CONFIG_NFSD=y <BR>CONFIG_NFSD_V3=y <BR># CONFIG_NFSD_V4 is not set <BR># CONFIG_NFSD_TCP is not set <BR>CONFIG_LOCKD=y <BR>CONFIG_LOCKD_V4=y <BR>CONFIG_EXPORTFS=y <BR>CONFIG_SUNRPC=y <BR># CONFIG_SUNRPC_GSS is not set <BR>CONFIG_SMB_FS=y <BR># CONFIG_SMB_NLS_DEFAULT is not set <BR>CONFIG_CIFS=y <BR># CONFIG_NCP_FS is not set <BR>CONFIG_CODA_FS=y <BR># CONFIG_CODA_FS_OLD_API is not set <BR># CONFIG_INTERMEZZO_FS is not set <BR># CONFIG_AFS_FS is not set <BR> <BR># <BR># Partition Types <BR># <BR>CONFIG_PARTITION_ADVANCED=y <BR># CONFIG_ACORN_PARTITION is not set <BR># CONFIG_OSF_PARTITION is not set <BR># CONFIG_AMIGA_PARTITION is not set <BR># CONFIG_ATARI_PARTITION is not set <BR>CONFIG_MAC_PARTITION=y <BR>CONFIG_MSDOS_PARTITION=y <BR>CONFIG_BSD_DISKLABEL=y <BR># CONFIG_MINIX_SUBPARTITION is not set <BR># CONFIG_SOLARIS_X86_PARTITION is not set <BR># CONFIG_UNIXWARE_DISKLABEL is not set <BR>CONFIG_LDM_PARTITION=y <BR># CONFIG_LDM_DEBUG is not set <BR># CONFIG_NEC98_PARTITION is not set <BR># CONFIG_SGI_PARTITION is not set <BR># CONFIG_ULTRIX_PARTITION is not set <BR># CONFIG_SUN_PARTITION is not set <BR># CONFIG_EFI_PARTITION is not set <BR> <BR># <BR># Native Language Support <BR># <BR>CONFIG_NLS=y <BR>CONFIG_NLS_DEFAULT="iso8859-1" <BR>CONFIG_NLS_CODEPAGE_437=y <BR># CONFIG_NLS_CODEPAGE_737 is not set <BR># CONFIG_NLS_CODEPAGE_775 is not set <BR>CONFIG_NLS_CODEPAGE_850=y <BR># CONFIG_NLS_CODEPAGE_852 is not set <BR># CONFIG_NLS_CODEPAGE_855 is not set <BR># CONFIG_NLS_CODEPAGE_857 is not set <BR># CONFIG_NLS_CODEPAGE_860 is not set <BR># CONFIG_NLS_CODEPAGE_861 is not set <BR># CONFIG_NLS_CODEPAGE_862 is not set <BR># CONFIG_NLS_CODEPAGE_863 is not set <BR># CONFIG_NLS_CODEPAGE_864 is not set <BR># CONFIG_NLS_CODEPAGE_865 is not set <BR># CONFIG_NLS_CODEPAGE_866 is not set <BR># CONFIG_NLS_CODEPAGE_869 is not set <BR># CONFIG_NLS_CODEPAGE_936 is not set <BR># CONFIG_NLS_CODEPAGE_950 is not set <BR># CONFIG_NLS_CODEPAGE_932 is not set <BR># CONFIG_NLS_CODEPAGE_949 is not set <BR># CONFIG_NLS_CODEPAGE_874 is not set <BR># CONFIG_NLS_ISO8859_8 is not set <BR># CONFIG_NLS_CODEPAGE_1250 is not set <BR># CONFIG_NLS_CODEPAGE_1251 is not set <BR>CONFIG_NLS_ISO8859_1=y <BR># CONFIG_NLS_ISO8859_2 is not set <BR># CONFIG_NLS_ISO8859_3 is not set <BR># CONFIG_NLS_ISO8859_4 is not set <BR># CONFIG_NLS_ISO8859_5 is not set <BR># CONFIG_NLS_ISO8859_6 is not set <BR># CONFIG_NLS_ISO8859_7 is not set <BR># CONFIG_NLS_ISO8859_9 is not set <BR># CONFIG_NLS_ISO8859_13 is not set <BR># CONFIG_NLS_ISO8859_14 is not set <BR># CONFIG_NLS_ISO8859_15 is not set <BR># CONFIG_NLS_KOI8_R is not set <BR># CONFIG_NLS_KOI8_U is not set <BR># CONFIG_NLS_UTF8 is not set <BR> <BR># <BR># Profiling support <BR># <BR># CONFIG_PROFILING is not set <BR> <BR># <BR># Kernel hacking <BR># <BR># CONFIG_DEBUG_KERNEL is not set <BR># CONFIG_DEBUG_SPINLOCK_SLEEP is not set <BR># CONFIG_FRAME_POINTER is not set <BR> <BR># <BR># Security options <BR># <BR># CONFIG_SECURITY is not set <BR> <BR># <BR># Cryptographic options <BR># <BR>CONFIG_CRYPTO=y <BR>CONFIG_CRYPTO_HMAC=y <BR>CONFIG_CRYPTO_NULL=m <BR>CONFIG_CRYPTO_MD4=m <BR>CONFIG_CRYPTO_MD5=y <BR>CONFIG_CRYPTO_SHA1=y <BR>CONFIG_CRYPTO_SHA256=m <BR>CONFIG_CRYPTO_SHA512=m <BR>CONFIG_CRYPTO_DES=y <BR>CONFIG_CRYPTO_BLOWFISH=m <BR>CONFIG_CRYPTO_TWOFISH=m <BR>CONFIG_CRYPTO_SERPENT=m <BR>CONFIG_CRYPTO_AES=m <BR>CONFIG_CRYPTO_CAST5=m <BR>CONFIG_CRYPTO_CAST6=m <BR>CONFIG_CRYPTO_DEFLATE=y <BR>CONFIG_CRYPTO_TEST=m <BR> <BR># <BR># Library routines <BR># <BR>CONFIG_CRC32=y <BR>CONFIG_ZLIB_INFLATE=y <BR>CONFIG_ZLIB_DEFLATE=y <BR>CONFIG_X86_BIOS_REBOOT=y <BR>CONFIG_PC=y <BR> </BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE><!-- BBCode Quote End --> <BR> <BR>Have a nice day <BR> <BR>Salbutamolo<br>
Avatar utente
salbutamolo
Linux 2.6
Linux 2.6
 
Messaggi: 905
Iscritto il: lun gen 12, 2004 0:00

Cups & USB

Messaggioda salbutamolo » sab feb 14, 2004 8:58

Ciao a tutti <BR>forse ho individuato il problema. Quando avvio il sistema con la stampante accesa il kernel mi restituisce un errore di questo tipo "modprobe fatal module mousedev not found"! Se lo avvio con la stampante spenta nessun problema! In entrambi i casi il mouse funziona correttamente. Vorrei sapere in che file si trova il comando che tenta di caricare questo modulo per poter eventualmente commentare la riga e verificare se il problema si risolve! Grazie, have a nice day <BR> <BR>Salbutamolo <br>
Avatar utente
salbutamolo
Linux 2.6
Linux 2.6
 
Messaggi: 905
Iscritto il: lun gen 12, 2004 0:00

Cups & USB

Messaggioda Loris » sab feb 14, 2004 9:42

/etc/rc.d/rc.modules <BR>#/sbin/modprobe mousedev <BR> <BR>Facci sapere..... <BR><br>
"Ho una testa piuttosto balzana e comunque non sono quello che credete" - Roger Keith Barrett
Avatar utente
Loris
Admin
Admin
 
Messaggi: 7589
Iscritto il: dom mar 30, 2003 23:00
Località: Gradisca D'Isonzo
Nome Cognome: Loris Vincenzi
Slackware: 14.1
Kernel: 3.10.17
Desktop: Kde 4.10.5

Cups & USB

Messaggioda salbutamolo » sab feb 14, 2004 13:00

Ciao Loris, <BR>avevo già guardato in quel file e la riga è correttamente commentata! Volevo chiederti io ho abilitato monoliticamente nel kernel in "device drivers" -> "input" devices" l´opzione "event interface" e in "usb support" l´opzione "enforce USB bandwidth allocation". Secondo te le suddette opzioni possono causare problemi? Have a nice day <BR> <BR>Salbutamolo<br>
Avatar utente
salbutamolo
Linux 2.6
Linux 2.6
 
Messaggi: 905
Iscritto il: lun gen 12, 2004 0:00

Cups & USB

Messaggioda salbutamolo » lun feb 16, 2004 9:51

Ciao a tutti, <BR>stufo di CUPS ho deciso di provare LPRng ma non ho avuto miglior fortuna. Dopo avere configurato il file /etc/printcap come suggeritomi da <a href="http://www.linuxprinting.org" target="_blank" target="_new">http://www.linuxprinting.org</a> in questo modo <BR><!-- BBCode Quote Start --><TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE> Samsung_ML-1210 <BR>:lp=/dev/usb/lp0: \ <BR>:force_localhost: \ <BR>:if=/usr/bin/foomatic-rip \ <BR>:ppd=/var/spool/lpd/Samsung_ML-1210/Samsung-ML-1210-gdi.ppd \ <BR>:sd=/var/spool/lpd/Samsung_ML-1210 \ <BR>:mx#0:sh: </BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE><!-- BBCode Quote End --> <BR>Sia la console che KDE mi restituiscono questo errore quando provo a stampare la pagina di prova: <BR><!-- BBCode Quote Start --><TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE> lpr: unable to print file: server-error-service-unavailable </BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE><!-- BBCode Quote End --> <BR>Inutile dire che ho scelto di avviare lpr al posto di cups al boot del sistema. Accetto suggerimenti :-Y :-Y <BR>Have a nice day <BR> <BR>Salbutamolo<br>
Avatar utente
salbutamolo
Linux 2.6
Linux 2.6
 
Messaggi: 905
Iscritto il: lun gen 12, 2004 0:00


Torna a Slackware

Chi c’è in linea

Visitano il forum: joe e 1 ospite