Pagina 1 di 1

cd-rom non parte

Inviato: dom set 14, 2003 11:47
da emamarro
ciao,ho il problema che il cd-rom non parte..(slack9) <BR>si trova montato su /mnt però quando metto dentro un cd e clicco su /mnt/cd-rom semplicemente non succede niente... <BR>cosa potrei fare? <BR>grazie <BR>ema<br>

cd-rom non parte

Inviato: dom set 14, 2003 13:30
da Loris
I tuoi dispositivi sono IDE ? usi l´ emulazione scsi ? <BR>Prova a montarlo da console così: <BR># mount -t iso9660 /dev/sr0 /mnt/cdrom<br>

cd-rom non parte

Inviato: dom set 14, 2003 18:54
da emamarro
mi risponde così.. <BR> <BR>root@darkstar:~# mount -t iso9660 /dev/sr0 /mnt/cdrom <BR>mount: /dev/sr0 is not a valid block device <BR> <BR>questo invece è il fstab.se può esserti utile.. <BR> <BR>/dev/hda6 swap swap defaults 0 0 <BR>/dev/hda2 / ext3 defaults 1 1 <BR>/dev/hda5 /home ext3 defaults 1 2 <BR>/dev/hda1 /fat32win vfat defaults 1 0 <BR>/dev/cdrom /mnt/cdrom iso9660 noauto,owner,ro 0 0 <BR>/dev/fd0 /mnt/floppy auto noauto,owner 0 0 <BR>devpts /dev/pts devpts gid=5,mode=620 0 0 <BR>proc /proc proc defaults 0 0 <BR> <BR>ciao.. <BR> <BR>#eject /mnt/cdrom funziona.. <BR> <BR><br>

cd-rom non parte

Inviato: dom set 14, 2003 20:13
da Loris
ls -al /dev/cdrom cosa dice ? verifica dove linka, poi dimmi se è attiva l´emulazione scsi. <BR>dmesg | less cosa dice ?<br>

cd-rom non parte

Inviato: lun set 15, 2003 12:46
da emamarro
#ls -al /dev/cdrom <BR>lrwxrwxrwx 1 root root 8 Sep 13 17:52 /dev/cdrom -> /dev/hdd <BR> <BR>#dmesg|less <BR> <BR>Linux version 2.4.20 (root@midas) (gcc version 3.2.2) #2 Mon Mar 17 22:02:15 PST 2003 <BR>BIOS-provided physical RAM map: <BR> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <BR> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <BR> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <BR> BIOS-e820: 0000000000100000 - 000000001bff0000 (usable) <BR> BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS) <BR> BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data) <BR> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <BR>447MB LOWMEM available. <BR>On node 0 totalpages: 114672 <BR>zone(0): 4096 pages. <BR>zone(1): 110576 pages. <BR>zone(2): 0 pages. <BR>Kernel command line: BOOT_IMAGE=Linux ro root=302 <BR>Initializing CPU#0 <BR>Detected 900.068 MHz processor. <BR>Console: colour dummy device 80x25 <BR>Calibrating delay loop... 1795.68 BogoMIPS <BR>Memory: 450668k/458688k available (1733k kernel code, 7632k reserved, 568k data, 112k init, 0k <BR> highmem) <BR>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) <BR>Inode cache hash table entries: 32768 (order: 6, 262144 bytes) <BR>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) <BR>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) <BR>Page-cache hash table entries: 131072 (order: 7, 524288 bytes) <BR>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <BR>CPU: L2 Cache: 256K (64 bytes/line) <BR>CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 <BR>CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 <BR>CPU: AMD Athlon(tm) Processor stepping 02 <BR>Enabling fast FPU save and restore... done. <BR>Checking ´hlt´ instruction... OK. <BR>POSIX conformance testing by UNIFIX <BR>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <BR>mtrr: detected mtrr type: Intel <BR>PCI: PCI BIOS revision 2.10 entry at 0xfb220, last bus=1 <BR>PCI: Using configuration type 1 <BR>PCI: Probing PCI hardware <BR>Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 89 & 1f -> 09 <BR>PCI: Using IRQ router VIA [1106/0686] at 00:07.0 <BR>Linux NET4.0 for Linux 2.4 <BR>Based upon Swansea University Computer Society NET3.039 <BR>Initializing RT netlink socket <BR>Starting kswapd <BR>VFS: Diskquotas version dquot_6.4.0 initialized <BR>Journalled Block Device driver loaded <BR>vesafb: framebuffer at 0xd4000000, mapped to 0xdc80d000, size 4096k <BR>vesafb: mode is 1024x768x8, linelength=1024, pages=4 <BR>vesafb: protected mode interface info at c000:02e5 <BR>vesafb: scrolling: redraw <BR>Console: switching to colour frame buffer device 128x48 <BR>fb0: VESA VGA frame buffer device <BR>pty: 512 Unix98 ptys configured <BR>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI <BR>enabled <BR>ttyS00 at 0x03f8 (irq = 4) is a 16550A <BR>ttyS01 at 0x02f8 (irq = 3) is a 16550A <BR>Real Time Clock Driver v1.10e <BR>Uniform Multi-Platform E-IDE driver Revision: 6.31 <BR>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <BR>VP_IDE: IDE controller on PCI bus 00 dev 39 <BR>VP_IDE: chipset revision 16 <BR>VP_IDE: not 100% native mode: will probe irqs later <BR>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <BR>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 <BR> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio <BR> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA <BR>hda: QUANTUM FIREBALLP LM20.5, ATA DISK drive <BR>hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive <BR>hdd: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive <BR>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <BR>ide1 at 0x170-0x177,0x376 on irq 15 <BR>blk: queue c0388784, I/O limit 4095Mb (mask 0xffffffff) <BR>hda: 40132503 sectors (20548 MB) w/1900KiB Cache, CHS=2498/255/63, UDMA(66) <BR>hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA <BR>Uniform CD-ROM driver Revision: 3.12 <BR>hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) <BR>ide-floppy driver 0.99.newide <BR>Partition check: <BR> hda: hda1 hda2 hda3 < hda5 hda6 > <BR>Floppy drive(s): fd0 is 1.44M <BR>FDC 0 is a post-1991 82077 <BR>RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize <BR>loop: loaded (max 8 devices) <BR>ide-floppy driver 0.99.newide <BR>SCSI subsystem driver Revision: 1.00 <BR>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <BR>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <BR>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <BR>md: linear personality registered as nr 1 <BR>md: raid0 personality registered as nr 2 <BR>md: raid1 personality registered as nr 3 <BR>md: raid5 personality registered as nr 4 <BR>raid5: measuring checksumming speed <BR> 8regs : 1289.600 MB/sec <BR> 32regs : 741.600 MB/sec <BR> pII_mmx : 2106.400 MB/sec <BR> p5_mmx : 2687.600 MB/sec <BR>raid5: using function: p5_mmx (2687.600 MB/sec) <BR>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <BR>md: Autodetecting RAID arrays. <BR>md: autorun ... <BR>md: ... autorun DONE. <BR>LVM version 1.0.5+(22/07/2002) <BR>NET4: Linux TCP/IP 1.0 for NET4.0 <BR>IP Protocols: ICMP, UDP, TCP <BR>IP: routing cache hash table of 4096 buckets, 32Kbytes <BR>TCP: Hash tables configured (established 32768 bind 65536) <BR>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <BR>kjournald starting. Commit interval 5 seconds <BR>EXT3-fs: mounted filesystem with ordered data mode. <BR>VFS: Mounted root (ext3 filesystem) readonly. <BR>Freeing unused kernel memory: 112k freed <BR>Adding Swap: 168640k swap-space (priority -1) <BR>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal <BR>kjournald starting. Commit interval 5 seconds <BR>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal <BR>EXT3-fs: mounted filesystem with ordered data mode. <BR>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <BR>Linux Kernel Card Services 3.1.22 <BR> options: [pci] [cardbus] [pm] <BR>isapnp: Scanning for PnP cards... <BR>isapnp: No Plug & Play device found <BR>Intel PCIC probe: not found. <BR>Databook TCIC-2 PCMCIA probe: not found. <BR>ds: no socket drivers loaded! <BR>Via 686a audio driver 1.9.1 <BR>PCI: Found IRQ 10 for device 00:07.5 <BR>ac97_codec: AC97 Audio codec, id: 0x4943:0x4511 (ICE1232) <BR>via82cxxx: board #1 at 0xDC00, IRQ 10 <BR>usb.c: registered new driver usbdevfs <BR>usb.c: registered new driver hub <BR>uhci.c: USB Universal Host Controller Interface driver v1.1 <BR>PCI: Found IRQ 9 for device 00:07.2 <BR>PCI: Sharing IRQ 9 with 00:07.3 <BR>uhci.c: USB UHCI at I/O 0xd400, IRQ 9 <BR>usb.c: new USB bus registered, assigned bus number 1 <BR>hub.c: USB hub found <BR>hub.c: 2 ports detected <BR>PCI: Found IRQ 9 for device 00:07.3 <BR>PCI: Sharing IRQ 9 with 00:07.2 <BR>uhci.c: USB UHCI at I/O 0xd800, IRQ 9 <BR>usb.c: new USB bus registered, assigned bus number 2 <BR>hub.c: USB hub found <BR>hub.c: 2 ports detected <BR>parport0: PC-style at 0x378 [PCSPP,EPP] <BR>parport_pc: Via 686A parallel port: io=0x378 <BR>hub.c: new USB device 00:07.2-1, assigned address 2 <BR>usb.c: USB device 2 (vend/prod 0x735/0xc541) is not claimed by any active driver. <BR>via_audio: ignoring drain playback error -11 <BR>via_audio: ignoring drain playback error -11 <BR>CSLIP: code copyright 1989 Regents of the University of California <BR>PPP generic driver version 2.4.2 <BR>PPP BSD Compression module registered <BR>PPP Deflate Compression module registered <BR>via_audio: ignoring drain playback error -11 <BR> <BR>#scusa per la lunghezza..ciao <BR><br>

cd-rom non parte

Inviato: lun set 15, 2003 13:38
da Loris
Strano, con # mount -t iso9660 /dev/hdd /mnt/cdrom che dice ? <BR>Lo fai da utente root ? che cosa cerchi di montare ? non cd audio vero :-) Il masterizatore ti funziona ?<br>

cd-rom non parte

Inviato: lun set 15, 2003 14:16
da emamarro
#mount -t iso9660 /dev/hdd/mnt/cdrom <BR> <BR>Usage: mount -V : print version <BR> mount -h : print this help <BR> mount : list mounted filesystems <BR> mount -l : idem, including volume labels <BR>So far the informational part. Next the mounting. <BR>The command is `mount [-t fstype] something somewhere´. <BR>Details found in /etc/fstab may be omitted. <BR> mount -a [-t|-O] ... : mount all stuff from /etc/fstab <BR> mount device : mount device at the known place <BR> mount directory : mount known device here <BR> mount -t type dev dir : ordinary mount command <BR>Note that one does not really mount a device, one mounts <BR>a filesystem (of the given type) found on the device. <BR>One can also mount an already visible directory tree elsewhere: <BR> mount --bind olddir newdir <BR>or move a subtree: <BR> mount --move olddir newdir <BR>A device can be given by name, say /dev/hda1 or /dev/cdrom, <BR>or by label, using -L label or by uuid, using -U uuid . <BR>Other options: [-nfFrsvw] [-o options]. <BR>For many more details, say man 8 mount . <BR> <BR> <BR>il lettore è un dvd.. <BR>l´altro lettore è un masterizzatore.. <BR>li vede ma non li sente:-) <BR> <BR>Comunque slackware ti fa imparare...una volta sistemata mi piace troppo di più delle altre distro.. <BR>ciao <BR><br>

cd-rom non parte

Inviato: lun set 15, 2003 19:40
da Roby
A me sembra strano, messo come sei messo il mount deve funzionare..... <BR>quest´ultimo comando ho notato che l´hai dato in modo sbagliato infatti /dev/hdd/mnt/cdrom non deve essere unito ma staccato /dev/hdd /mnt/cdrom prova a ripetere il mount anche su altri dev tipo hdc o prova dal masterizzatore e viceversa.<br>