Dunque......Ho Vinto....
<BR>
<BR>Posto la Procedura Completa x chi dovesse avere lo stesso problema
<BR>
<BR>Ho usato le info riguardo ai moduli da installare che erano nel link che mi hai passato....cioè:
<BR>
<BR>1) selezionare come Built In nel Kernel:
<BR>
<BR>in device drivers
<BR>in input device support
<BR>- event interface
<BR>select mice
<BR>- PS/2
<BR>- synaptics touchpad
<BR>
<BR>buils and install your kernel.
<BR>
<BR>2) Installare i driver Synaptic....i binari dell´ultima rel la trovate qui
<BR>( <a href="
http://w1.894.telia.com/~u89404340/touc ... .2.tar.bz2" target="_blank" target="_new">
http://w1.894.telia.com/~u89404340/touc ... tar.bz2</a> )
<BR>
<BR>Dopo averli decomattati con tar xjvf nomefile entrate nella directory e date i soliti
<BR># make
<BR># make install
<BR>
<BR>a questo punto vi avrà copiato il driver synaptics_drv.o nella directory /usr/X11R6/lib/modules/drivers/
<BR>
<BR>3) a questo punto vi rimane solamente da modificare il vostro XF86Config seguendo le istruzioni che trovate nel file INSTALL presente nella directory synaptic. Per chiarimenti vi posto le sezioni interessate del mio file di configurazione.
<BR>
<BR>
<BR>
<BR># **********************************************************************
<BR># Module section -- this section is used to specify
<BR># which dynamically loadable modules to load.
<BR># **********************************************************************
<BR>#
<BR>Section "Module"
<BR>
<BR># This loads the DBE extension module.
<BR>
<BR> Load "dbe" # Double buffer extension
<BR>
<BR># This loads the miscellaneous extensions module, and disables
<BR># initialisation of the XFree86-DGA extension within that module.
<BR> SubSection "extmod"
<BR> Option "omit xfree86-dga" # don´t initialise the DGA extension
<BR> EndSubSection
<BR>
<BR># This loads the font modules
<BR> Load "type1"
<BR> Load "freetype"
<BR> Load "speedo"
<BR>
<BR># This loads the GLX module
<BR> Load "glx"
<BR>
<BR># This load the synaptics
<BR> Load "synaptics"
<BR>EndSection
<BR>
<BR># **********************************************************************
<BR># Input devices
<BR># **********************************************************************
<BR>
<BR># **********************************************************************
<BR># Core keyboard´s InputDevice section
<BR># **********************************************************************
<BR>
<BR>Section "InputDevice"
<BR>
<BR> Identifier "Keyboard1"
<BR> Driver "Keyboard"
<BR># For most OSs the protocol can be omitted (it defaults to "Standard").
<BR># When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
<BR># uncomment the following line.
<BR>
<BR># Option "Protocol" "Xqueue"
<BR>
<BR># Set the keyboard auto repeat parameters. Not all platforms implement
<BR># this.
<BR>
<BR># Option "AutoRepeat" "500 5"
<BR>
<BR># Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
<BR>
<BR># Option "Xleds" "1 2 3"
<BR>
<BR># To disable the XKEYBOARD extension, uncomment XkbDisable.
<BR>
<BR># Option "XkbDisable"
<BR>
<BR># To customise the XKB settings to suit your keyboard, modify the
<BR># lines below (which are the defaults). For example, for a European
<BR># keyboard, you will probably want to use one of:
<BR>#
<BR># Option "XkbModel" "pc102"
<BR># Option "XkbModel" "pc105"
<BR>#
<BR># If you have a Microsoft Natural keyboard, you can use:
<BR>#
<BR># Option "XkbModel" "microsoft"
<BR>#
<BR># If you have a US "windows" keyboard you will want:
<BR>#
<BR># Option "XkbModel" "pc104"
<BR>#
<BR># Then to change the language, change the Layout setting.
<BR># For example, a german layout can be obtained with:
<BR>#
<BR># Option "XkbLayout" "de"
<BR>#
<BR># or:
<BR>#
<BR># Option "XkbLayout" "de"
<BR># Option "XkbVariant" "nodeadkeys"
<BR>#
<BR># If you´d like to switch the positions of your capslock and
<BR># control keys, use:
<BR>#
<BR># Option "XkbOptions" "ctrl:swapcaps"
<BR>
<BR>
<BR># These are the default XKB settings for XFree86
<BR>#
<BR># Option "XkbRules" "xfree86"
<BR># Option "XkbModel" "pc101"
<BR># Option "XkbLayout" "us"
<BR># Option "XkbVariant" ""
<BR># Option "XkbOptions" ""
<BR>
<BR>EndSection
<BR>
<BR>
<BR># **********************************************************************
<BR># Core Pointer´s InputDevice section
<BR># **********************************************************************
<BR>Section "InputDevice"
<BR> Driver "synaptics"
<BR> Identifier "Mouse[1]"
<BR> Option "Device" "/dev/psaux"
<BR> Option "Protocol" "auto-dev"
<BR> Option "LeftEdge" "1900"
<BR> Option "RightEdge" "5400"
<BR> Option "TopEdge" "1900"
<BR> Option "BottomEdge" "4000"
<BR> Option "FingerLow" "25"
<BR> Option "FingerHigh" "30"
<BR> Option "MaxTapTime" "180"
<BR> Option "MaxTapMove" "220"
<BR> Option "VertScrollDelta" "100"
<BR> Option "MinSpeed" "0.02"
<BR> Option "MaxSpeed" "0.18"
<BR> Option "AccelFactor" "0.0010"
<BR> Option "SHMConfig" "on"
<BR># Option "Repeater" "/dev/ps2mouse"
<BR>EndSection
<BR>
<BR># **********************************************************************
<BR># ServerLayout sections.
<BR># **********************************************************************
<BR>
<BR># Any number of ServerLayout sections may be present. Each describes
<BR># the way multiple screens are organised. A specific ServerLayout
<BR># section may be specified from the X server command line with the
<BR># "-layout" option. In the absence of this, the first section is used.
<BR># When now ServerLayout section is present, the first Screen section
<BR># is used alone.
<BR>
<BR>Section "ServerLayout"
<BR>
<BR># The Identifier line must be present
<BR> Identifier "Simple Layout"
<BR>
<BR># Each Screen line specifies a Screen section name, and optionally
<BR># the relative position of other screens. The four names after
<BR># primary screen name are the screens to the top, bottom, left and right
<BR># of the primary screen. In this example, screen 2 is located to the
<BR># right of screen 1.
<BR>
<BR> Screen "Screen 1"
<BR>
<BR># Each InputDevice line specifies an InputDevice section name and
<BR># optionally some options to specify the way the device is to be
<BR># used. Those options include "CorePointer", "CoreKeyboard" and
<BR># "SendCoreEvents".
<BR>
<BR> InputDevice "Mouse[1]" "CorePointer"
<BR> InputDevice "Keyboard1" "CoreKeyboard"
<BR># InputDevice "Mouse" "CorePointer"
<BR>EndSection
<BR>
<BR>
<BR>Section "InputDevice"
<BR>
<BR>Identifier "Keyboard"
<BR>
<BR> Option "XkbModel" "pc104"
<BR> Option "XkbLayout" "us"
<BR> Driver "keyboard"
<BR>EndSection
<BR>
<BR>
<BR>Section "InputDevice"
<BR>
<BR>Identifier "Mouse[1]"
<BR>
<BR> Option "Protocol" ""
<BR> Option "Device" "/dev/psaux"
<BR> Driver "mouse"
<BR> Option "Emulate3Buttons"
<BR>EndSection
<BR>#*********************************************************************
<BR>
<BR>
<BR>P.S. io ho rimosso completamente la configurazione x il vecchio mouse lasciando solamente quella riportata nel file INSTALL
<BR>
<BR>Ricordatevi di aggiungere, nella sezione moduli, la linea
<BR>
<BR>Load "synaptic"
<BR>
<BR>Credo che, se selezionato come Builtin, vada anche senza questa linea, ma io ce l´ho messa lo stesso....si sa mai......
<BR>
<BR>Inoltre dovrete rendere gli Identifier Uguali sia nella configurazione della sezione InputDevice che in quella dei Server Layout......controllate il mio file x capire meglio ^_^
<BR>
<BR>
<BR>
<BR>Divertivevi......
<BR>
<BR>Questo che ho postato è quello che mi avrebbe fatto piacere trovare come tutorial quindi, nn avendolo trovato, ve lo posto io, spero di poter essere utile a qualcuno ^_^<br>