Configurazione bluetooth su toshiba

da **NewSlackNux** » ven nov 20, 2009 19:27

Salve ragazzi, ho installato la slackware 13 a 64 bit sul mio nuovo portatile e sto provando a configurarlo al massimo. Sono riuscito a impostare tutto, tranne il bluetooth che non ho mai configurato sui portatili.
Il mio toshiba non supporta il modulo toshiba_acpi.ko, avendo un bios phoenix. Ho installato i moduli omnibook, e dopo averli lanciati... non è successo niente. Ho solo due nuovi file: /proc/omnibook/version e /proc/omnibook/acpi. Li ho "cattati" e mi restituiscono solo informazioni generiche sul portatile e su omnibook.
Ho provato ad riavviare più volte il server bluetooth, ma niente.
Ho seguito la procedura consigliata nella sezione dei problemi conosciuti, ma non ha funzionato.

Questo dell'lspci:

Codice: Seleziona tutto: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] 01:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon HD 4000 Series] 0e:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 14:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100

lsmod:

Codice: Seleziona tutto: Module Size Used by rfkill_input 6688 0 rfkill 11316 1 rfkill_input omnibook 58344 0 coretemp 7072 0 snd_seq_dummy 3172 0 snd_seq_oss 33536 0 snd_seq_midi_event 7264 1 snd_seq_oss snd_seq 56320 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 7188 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42976 0 snd_mixer_oss 16768 1 snd_pcm_oss bridge 54336 0 stp 2660 1 bridge bnep 14464 2 rfcomm 40832 4 l2cap 23584 16 bnep,rfcomm bluetooth 58308 5 bnep,rfcomm,l2cap ipv6 288704 18 pcmcia 36824 0 pcmcia_core 36804 1 pcmcia cpufreq_ondemand 8016 2 acpi_cpufreq 8536 0 freq_table 4160 2 cpufreq_ondemand,acpi_cpufreq lp 11972 0 ppdev 8488 0 parport_pc 28200 0 parport 36752 3 lp,ppdev,parport_pc joydev 11968 0 fuse 60096 5 snd_hda_codec_atihdmi 4000 1 fglrx 2195912 35 snd_hda_codec_realtek 253956 1 snd_hda_intel 27176 3 iwlagn 98532 0 thermal 18880 0 uvcvideo 63436 0 iwlcore 85856 1 iwlagn snd_hda_codec 60192 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel processor 43960 4 acpi_cpufreq,thermal video 20148 0 snd_hwdep 8456 1 snd_hda_codec videodev 43168 1 uvcvideo thermal_sys 13088 3 thermal,processor,video psmouse 46748 0 snd_pcm 80872 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec r8169 37860 0 evdev 11392 10 hwmon 2728 2 coretemp,thermal_sys serio_raw 6116 0 output 3136 1 video button 7328 0 battery 12488 0 ac 5000 0 led_class 4360 1 iwlcore sg 29920 0 input_polldev 3952 0 mii 5216 1 r8169 intel_agp 30960 0 v4l1_compat 15364 2 uvcvideo,videodev rtc_cmos 11928 0 rtc_core 19652 1 rtc_cmos rtc_lib 2880 1 rtc_core v4l2_compat_ioctl32 10912 1 videodev snd_timer 22256 2 snd_seq,snd_pcm i2c_i801 10400 0 mac80211 171288 2 iwlagn,iwlcore snd 65000 17 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 7168 1 snd cfg80211 42064 3 iwlagn,iwlcore,mac80211 snd_page_alloc 9616 2 snd_hda_intel,snd_pcm

lsusb:

Codice: Seleziona tutto: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 064e:d104 Suyin Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Questo è l'output di hcitool dev:

Codice: Seleziona tutto: Devices:

Se avete bisogno di altre informazioni, non siate contenuti. Vi prego aiutatemi...

da **NewSlackNux** » ven nov 20, 2009 19:28

Questo è il risultato di dmesg (prima non entrava):

Codice: Seleziona tutto: ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2504800-0xf2504bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2500000-0xf2503fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2504c00-0xf2504fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2504000-0xf25047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xf2100000-0xf210ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 32bit mmio: [0xf2110000-0xf2113fff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] pci 0000:00:01.0: bridge 32bit mmio: [0xf2100000-0xf21fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] pci 0000:0e:00.0: reg 10 io port: [0x4000-0x40ff] pci 0000:0e:00.0: reg 18 64bit mmio: [0xf2010000-0xf2010fff] pci 0000:0e:00.0: reg 20 64bit mmio: [0xf2000000-0xf200ffff] pci 0000:0e:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:0e:00.0: supports D1 D2 pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0e:00.0: PME# disabled pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf2000000-0xf20fffff] pci 0000:14:00.0: reg 10 64bit mmio: [0xf2200000-0xf2201fff] pci 0000:14:00.0: PME# supported from D0 D3hot D3cold pci 0000:14:00.0: PME# disabled pci 0000:00:1c.3: bridge 32bit mmio: [0xf2200000-0xf22fffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved system 00:04: ioport range 0x480-0x48f has been reserved system 00:04: ioport range 0xffff-0xffff has been reserved system 00:04: ioport range 0xffff-0xffff has been reserved system 00:04: ioport range 0x400-0x47f has been reserved system 00:04: ioport range 0x1180-0x11ff has been reserved system 00:04: ioport range 0xfe00-0xfe00 has been reserved system 00:04: ioport range 0xff2c-0xff7f has been reserved system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved system 00:08: iomem range 0xe0000000-0xefffffff has been reserved system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xf2100000-0xf21fffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x3000-0x3fff pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0e pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xc0000000-0xc00fffff pci 0000:00:1c.2: PREFETCH window: 0x000000f2000000-0x000000f20fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:14 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: 0xf2200000-0xf22fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:20 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:26 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xf2100000-0xf21fffff] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff] pci_bus 0000:01: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf5ffffff] pci_bus 0000:02: resource 2 mem: [0xf0000000-0xf1ffffff] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:0e: resource 0 io: [0x4000-0x4fff] pci_bus 0000:0e: resource 1 mem: [0xc0000000-0xc00fffff] pci_bus 0000:0e: resource 2 mem: [0xf2000000-0xf20fffff] pci_bus 0000:0e: resource 3 mem: [0x0-0x0] pci_bus 0000:14: resource 0 mem: [0x0-0x0] pci_bus 0000:14: resource 1 mem: [0xf2200000-0xf22fffff] pci_bus 0000:14: resource 2 mem: [0x0-0x0] pci_bus 0000:14: resource 3 mem: [0x0-0x0] pci_bus 0000:20: resource 0 mem: [0x0-0x0] pci_bus 0000:20: resource 1 mem: [0x0-0x0] pci_bus 0000:20: resource 2 mem: [0x0-0x0] pci_bus 0000:20: resource 3 mem: [0x0-0x0] pci_bus 0000:26: resource 0 mem: [0x0-0x0] pci_bus 0000:26: resource 1 mem: [0x0-0x0] pci_bus 0000:26: resource 2 mem: [0x0-0x0] pci_bus 0000:26: resource 3 io: [0x00-0xffff] pci_bus 0000:26: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x36 set to 0x1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) NTFS driver 2.1.29 [Flags: R/W]. JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem GFS2 (built Aug 17 2009 11:56:22) installed msgmni has been set to 7817 alg: No test for cipher_null (cipher_null-generic) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010680000, using 1536k, total 16384k vesafb: mode is 1024x768x8, linelength=1024, pages=18 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled floppy0: no floppy controllers found brd: module loaded loop: module loaded Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) input: Macintosh mouse button emulation as /devices/virtual/input/input0 Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 Loading iSCSI transport class v2.0-870. rdac: device handler registered hp_sw: device handler registered emc: device handler registered alua: device handler registered fcoe_transport_register:fcoesw Adaptec aacraid driver 1.1-5[2456]-ms scsi: <fdomain> Detection failed (no card) QLogic Fibre Channel HBA Driver: 8.03.00-k4 iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.3.0 Copyright(c) 2004-2008 Emulex. All rights reserved. DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 GDT-HA: Storage RAID Controller Driver. Version: 3.05 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007) RocketRAID 3xxx/4xxx Controller driver v1.3 (071203) stex: Promise SuperTrak EX Driver version: 3.6.0000.1 st: Version 20081215, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504100 irq 29 ata2: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504180 irq 29 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504300 irq 29 ata6: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504380 irq 29 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: TOSHIBA MK5055GSX, FG001M, max UDMA/100 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/100 scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK5055GS FG00 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 1:0:0:0: [sda] Attached SCSI disk ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TO01, max UDMA/100, ATAPI AN ata5.00: configured for UDMA/100 scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TO01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 ata6: SATA link down (SStatus 0 SControl 300) I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 Fusion MPT FC Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf2504800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29.6 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2504c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29.6 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29.6 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.29.6 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.29.6 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.29.6 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.29.6 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.29.6 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected sl811: driver sl811-hcd, 19 May 2005 r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb 1-6: new high speed USB device using ehci_hcd and address 2 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int64x1 1847 MB/s input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 raid6: int64x2 2570 MB/s raid6: int64x4 2152 MB/s raid6: int64x8 1476 MB/s raid6: sse2x1 3324 MB/s raid6: sse2x2 3609 MB/s raid6: sse2x4 5777 MB/s raid6: using algorithm sse2x4 (5777 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs: sda5: couldn't mount because of unsupported optional features (240). EXT2-fs: sda5: couldn't mount because of unsupported optional features (240). EXT4-fs: barriers enabled usb 1-6: New USB device found, idVendor=064e, idProduct=d104 usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=4 usb 1-6: Product: USB 2.0 Camera usb 1-6: Manufacturer: SuYin usb 1-6: SerialNumber: CN031B-M08C-MI012-VS-R01.01.00 usb 1-6: configuration #1 chosen from 1 choice kjournald2 starting: pid 1444, dev sda5:8, commit interval 5 seconds EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda5 with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:5. Freeing unused kernel memory: 436k freed cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel) i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f] ACPI: Device needs an ACPI driver rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs sd 1:0:0:0: Attached scsi generic sg0 type 0 sr 4:0:0:0: Attached scsi generic sg1 type 5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID0] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 ACPI: AC Adapter [ACAD] (on-line) ACPI: Power Button (CM) [PWRB] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:0e:00.0: setting latency timer to 64 r8169 0000:0e:00.0: irq 30 for MSI/MSI-X eth0: RTL8102e at 0xffffc2001067e000, 00:26:22:2e:6a:5d, XID 24c00000 IRQ 30 Linux video capture interface: v2.00 acpi device:05: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:03/input/input5 ACPI: SSDT BDF1ACA0, 0223 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT BDF19620, 05A3 (r1 PmRef Cpu0Cst 3001 INTL 20050624) ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI_CPU:00: registered as cooling_device1 ACPI: SSDT BDF1AA20, 01CF (r1 PmRef ApIst 3000 INTL 20050624) ACPI: SSDT BDF1AF20, 008D (r1 PmRef ApCst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2]) processor ACPI_CPU:01: registered as cooling_device2 Marking TSC unstable due to TSC halts in idle uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:d104) input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input6 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) ACPI: Battery Slot [BAT1] (battery present) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks iwlagn: Copyright(c) 2003-2008 Intel Corporation iwlagn 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 iwlagn 0000:14:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 hda_intel: probe_mask set to 0x3 for device 1179:ff00 HDA Intel 0000:00:1b.0: setting latency timer to 64 iwlagn 0000:14:00.0: PCI INT A disabled wmaster0 (iwlagn): not using net_device_ops yet phy0: Selected rate control algorithm 'iwl-agn-rs' wlan0 (iwlagn): not using net_device_ops yet hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: setting latency timer to 64 fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 3748 MBytes. [fglrx] vendor: 1002 device: 9553 count: 1 [fglrx] ioport: bar 1, base 0x2000, size: 0x100 pci 0000:01:00.0: power state changed by ACPI to D0 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [fglrx] Driver built-in PAT support is enabled successfully [fglrx] module loaded - fglrx 8.65.4 [Aug 13 2009] with 1 minors cfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Adding 7815580k swap on /dev/sda6. Priority:-1 extents:1 across:7815580k fuse init (API version 7.11) Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 EXT4 FS on sda5, internal journal on sda5:8 Clocksource tsc unstable (delta = -171076176 ns) ppdev: user-space parallel port driver lp: driver loaded but no devices found r8169: eth0: link down NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: Core ver 2.14 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered fglrx_pci 0000:01:00.0: irq 31 for MSI/MSI-X [fglrx] Firegl kernel thread PID: 3581 [fglrx] Gart USWC size:1220 M. [fglrx] Gart cacheable size:484 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:fc2d000, size:3d3000 [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 iwlagn 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 iwlagn 0000:14:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) iwlagn 0000:14:00.0: irq 32 for MSI/MSI-X iwlagn 0000:14:00.0: firmware: requesting iwlwifi-5000-1.ucode iwlagn loaded firmware version 5.4.1.16 Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:13:49:a4:7d:df wlan0: authenticated wlan0: associate with AP 00:13:49:a4:7d:df wlan0: RX AssocResp from 00:13:49:a4:7d:df (capab=0x411 status=0 aid=20) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready cfg80211: Calling CRDA for country: AT cfg80211: Current regulatory domain updated by AP to: AT (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) omnibook: Driver version 2.20080627. omnibook: Unknown model. omnibook: Enabled features: dmi version.

da **neongen** » ven nov 20, 2009 20:43

seeeeeee, il bluetooth funzionante su slackware64! :laughing3:

CAMBIA DISTRO! SUBITO!

a parte gli scherzi, fatti un'idea leggendo qui, ma credo che a te il modulo omnibook non attivi la scheda, quindi cerca in rete quali parametri abbia e come impostarli

Configurazione bluetooth su toshiba

Configurazione bluetooth su toshiba

Re: Configurazione bluetooth su toshiba

Re: Configurazione bluetooth su toshiba

Chi c’è in linea