Slackware64 14.0 e Wi-Fi
Moderatore: Staff
Regole del forum
1) Citare sempre la versione di Slackware64 usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware64, se l'argomento è Slackware32 o generale usate rispettivamente il forum Slackware o Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
1) Citare sempre la versione di Slackware64 usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware64, se l'argomento è Slackware32 o generale usate rispettivamente il forum Slackware o Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Slackware64 14.0 e Wi-Fi
Salve a tutti,
vi espongo brevemente il mio problema, nella speranza che qualche anima pia possa darmi una mano: dopo una fresca installazione di Slackware, non riesco ad attivare, tramite la combinazione di tasti Fn+F12, la connettività wi-fi del mio PC portatile. La mia scheda è una Ralink RT5390, integrata nel notebook.
Cercando un po' su Google, non sono riuscito a capire come e, soprattutto, quali driver installare.
Spero vivamente che qualcuno sia in grado di aiutarmi!
Grazie in anticipo.
vi espongo brevemente il mio problema, nella speranza che qualche anima pia possa darmi una mano: dopo una fresca installazione di Slackware, non riesco ad attivare, tramite la combinazione di tasti Fn+F12, la connettività wi-fi del mio PC portatile. La mia scheda è una Ralink RT5390, integrata nel notebook.
Cercando un po' su Google, non sono riuscito a capire come e, soprattutto, quali driver installare.
Spero vivamente che qualcuno sia in grado di aiutarmi!
Grazie in anticipo.
- 414N
- Iper Master
- Messaggi: 2922
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Slackware64 14.0 e Wi-Fi
Comincia col riportare gli output di
Dato che saranno un po' prolissi (soprattutto i primi 2), racchiudili tra tag code, mi raccomando.
Codice: Seleziona tutto
dmesg
Codice: Seleziona tutto
lsmod
Codice: Seleziona tutto
ifconfig -a
Codice: Seleziona tutto
iwconfig -a
Re: Slackware64 14.0 e Wi-Fi
Grazie mille per il prezioso suggerimento. Appena ho nuovamente il PC sottomano, posterò i risultati.
Re: Slackware64 14.0 e Wi-Fi
Ecco l'output di dmesg:
Codice: Seleziona tutto
f88025ebfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0025f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x0009aabf
[ 0.000000] 0: 0x0009afff -> 0x0009b000
[ 0.000000] 0: 0x00100000 -> 0x0025f600
[ 0.000000] On node 0 totalpages: 2071629
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 612096 pages, LIFO batch:31
[ 0.000000] Normal zone: 22488 pages used for memmap
[ 0.000000] Normal zone: 1416744 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 000000009aabf000 - 000000009aebf000
[ 0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
[ 0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
[ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88025f200000 s75968 r8192 d22336 u262144
[ 0.000000] pcpu-alloc: s75968 r8192 d22336 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2032752
[ 0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=804 vt.default_utf8=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8056316k/9951232k available (11471k kernel code, 1664716k absent, 230200k reserved, 5867k data, 848k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2494.292 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.58 BogoMIPS (lpj=2494292)
[ 0.000008] pid_max: default: 32768 minimum: 301
[ 0.000035] Security Framework initialized
[ 0.000049] Mount-cache hash table entries: 256
[ 0.000135] Initializing cgroup subsys cpuacct
[ 0.000140] Initializing cgroup subsys memory
[ 0.000147] Initializing cgroup subsys devices
[ 0.000149] Initializing cgroup subsys freezer
[ 0.000152] Initializing cgroup subsys net_cls
[ 0.000155] Initializing cgroup subsys blkio
[ 0.000160] Initializing cgroup subsys perf_event
[ 0.000185] CPU: Physical Processor ID: 0
[ 0.000188] CPU: Processor Core ID: 0
[ 0.000192] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000193] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000199] mce: CPU supports 7 MCE banks
[ 0.000211] CPU0: Thermal monitoring enabled (TM1)
[ 0.000218] using mwait in idle threads.
[ 0.000290] ACPI: Core revision 20110623
[ 0.018867] ftrace: allocating 35248 entries in 139 pages
[ 0.031118] x2apic not enabled, IRQ remapping init failed
[ 0.031500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.041490] CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz stepping 07
[ 0.142762] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.142768] PEBS disabled due to CPU errata.
[ 0.142772] ... version: 3
[ 0.142774] ... bit width: 48
[ 0.142776] ... generic registers: 4
[ 0.142778] ... value mask: 0000ffffffffffff
[ 0.142780] ... max period: 000000007fffffff
[ 0.142782] ... fixed-purpose events: 3
[ 0.142784] ... event mask: 000000070000000f
[ 0.142890] Booting Node 0, Processors #1
[ 0.142893] smpboot cpu 1: start_ip = 98000
[ 0.233805] #2
[ 0.233808] smpboot cpu 2: start_ip = 98000
[ 0.324670] #3
[ 0.324673] smpboot cpu 3: start_ip = 98000
[ 0.415486] Brought up 4 CPUs
[ 0.415491] Total of 4 processors activated (19952.67 BogoMIPS).
[ 0.418172] devtmpfs: initialized
[ 0.418934] PM: Registering ACPI NVS region at 9aebf000 (1048576 bytes)
[ 0.418968] xor: automatically using best checksumming function: generic_sse
[ 0.423362] generic_sse: 11152.000 MB/sec
[ 0.423365] xor: using function: generic_sse (11152.000 MB/sec)
[ 0.423370] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.423482] print_constraints: dummy:
[ 0.423531] NET: Registered protocol family 16
[ 0.423698] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.423702] ACPI: bus type pci registered
[ 0.423806] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.423812] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.468022] PCI: Using configuration type 1 for base access
[ 0.477348] bio: create slab <bio-0> at 0
[ 0.494272] raid6: int64x1 2410 MB/s
[ 0.511255] raid6: int64x2 2882 MB/s
[ 0.528213] raid6: int64x4 2453 MB/s
[ 0.545199] raid6: int64x8 2199 MB/s
[ 0.562173] raid6: sse2x1 6785 MB/s
[ 0.579142] raid6: sse2x2 8273 MB/s
[ 0.596117] raid6: sse2x4 9648 MB/s
[ 0.596119] raid6: using algorithm sse2x4 (9648 MB/s)
[ 0.596159] ACPI: Added _OSI(Module Device)
[ 0.596162] ACPI: Added _OSI(Processor Device)
[ 0.596164] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.596167] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.597456] ACPI: EC: Look up EC in DSDT
[ 0.598661] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.608645] ACPI: SSDT 000000009ae1b018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.608966] ACPI: Dynamic OEM Table Load:
[ 0.608969] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.611380] ACPI: SSDT 000000009ae1ca98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.611723] ACPI: Dynamic OEM Table Load:
[ 0.611726] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.614263] ACPI: SSDT 000000009ae1ad98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.614577] ACPI: Dynamic OEM Table Load:
[ 0.614580] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.693711] ACPI: Interpreter enabled
[ 0.693716] ACPI: (supports S0 S3 S4 S5)
[ 0.693740] ACPI: Using IOAPIC for interrupt routing
[ 0.699169] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.699300] ACPI: No dock devices found.
[ 0.699303] HEST: Table not found.
[ 0.699306] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.699635] \_SB_.PCI0:_OSC invalid UUID
[ 0.699636] _OSC request data:1 8 1f
[ 0.699640] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.700235] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.700239] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.700242] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.700247] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
[ 0.700251] pci_root PNP0A08:00: host bridge window [mem 0x25f600000-0x65f5fffff]
[ 0.700263] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 0.700296] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.700324] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.700327] pci 0000:00:01.0: PME# disabled
[ 0.700343] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
[ 0.700352] pci 0000:00:02.0: reg 10: [mem 0xc3000000-0xc33fffff 64bit]
[ 0.700358] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.700362] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
[ 0.700410] pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
[ 0.700432] pci 0000:00:14.0: reg 10: [mem 0xc3600000-0xc360ffff 64bit]
[ 0.700502] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.700506] pci 0000:00:14.0: PME# disabled
[ 0.700527] pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
[ 0.700550] pci 0000:00:16.0: reg 10: [mem 0xc3614000-0xc361400f 64bit]
[ 0.700625] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.700629] pci 0000:00:16.0: PME# disabled
[ 0.700660] pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
[ 0.700913] pci 0000:00:1a.0: reg 10: [mem 0xc3619000-0xc36193ff]
[ 0.702344] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.702348] pci 0000:00:1a.0: PME# disabled
[ 0.702373] pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
[ 0.702388] pci 0000:00:1b.0: reg 10: [mem 0xc3610000-0xc3613fff 64bit]
[ 0.702454] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.702458] pci 0000:00:1b.0: PME# disabled
[ 0.702477] pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
[ 0.702554] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.702558] pci 0000:00:1c.0: PME# disabled
[ 0.702580] pci 0000:00:1c.1: [8086:1e12] type 1 class 0x000604
[ 0.702658] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.702662] pci 0000:00:1c.1: PME# disabled
[ 0.702684] pci 0000:00:1c.2: [8086:1e14] type 1 class 0x000604
[ 0.702761] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.702765] pci 0000:00:1c.2: PME# disabled
[ 0.702796] pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
[ 0.703041] pci 0000:00:1d.0: reg 10: [mem 0xc3618000-0xc36183ff]
[ 0.704473] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.704478] pci 0000:00:1d.0: PME# disabled
[ 0.704501] pci 0000:00:1f.0: [8086:1e59] type 0 class 0x000601
[ 0.704623] pci 0000:00:1f.2: [8086:1e03] type 0 class 0x000106
[ 0.704641] pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f]
[ 0.704649] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097]
[ 0.704657] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087]
[ 0.704666] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093]
[ 0.704674] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
[ 0.704682] pci 0000:00:1f.2: reg 24: [mem 0xc3617000-0xc36177ff]
[ 0.704725] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.704729] pci 0000:00:1f.2: PME# disabled
[ 0.704746] pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
[ 0.704761] pci 0000:00:1f.3: reg 10: [mem 0xc3615000-0xc36150ff 64bit]
[ 0.704782] pci 0000:00:1f.3: reg 20: [io 0x5040-0x505f]
[ 0.704836] pci 0000:01:00.0: [1002:6840] type 0 class 0x000300
[ 0.704849] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.704859] pci 0000:01:00.0: reg 18: [mem 0xc2000000-0xc201ffff 64bit]
[ 0.704866] pci 0000:01:00.0: reg 20: [io 0x4000-0x40ff]
[ 0.704879] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.704909] pci 0000:01:00.0: supports D1 D2
[ 0.705983] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.705995] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.706002] pci 0000:00:01.0: bridge window [mem 0xc2000000-0xc2ffffff]
[ 0.706011] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.706141] pci 0000:07:00.0: [1814:539a] type 0 class 0x000280
[ 0.706161] pci 0000:07:00.0: reg 10: [mem 0xc3500000-0xc350ffff]
[ 0.708002] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 0.708020] pci 0000:00:1c.0: bridge window [mem 0xc3500000-0xc35fffff]
[ 0.708132] pci 0000:08:00.0: [10ec:8136] type 0 class 0x000200
[ 0.708152] pci 0000:08:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.708186] pci 0000:08:00.0: reg 18: [mem 0xc3404000-0xc3404fff 64bit pref]
[ 0.708208] pci 0000:08:00.0: reg 20: [mem 0xc3400000-0xc3403fff 64bit pref]
[ 0.708300] pci 0000:08:00.0: supports D1 D2
[ 0.708301] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.708307] pci 0000:08:00.0: PME# disabled
[ 0.709983] pci 0000:00:1c.1: PCI bridge to [bus 08-08]
[ 0.709996] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.710015] pci 0000:00:1c.1: bridge window [mem 0xc3400000-0xc34fffff 64bit pref]
[ 0.710192] pci 0000:09:00.0: [10ec:5229] type 0 class 0x00ff00
[ 0.710254] pci 0000:09:00.0: reg 10: [mem 0xc1000000-0xc1000fff]
[ 0.710737] pci 0000:09:00.0: supports D1 D2
[ 0.710738] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
[ 0.710750] pci 0000:09:00.0: PME# disabled
[ 0.712017] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[ 0.712031] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.712040] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
[ 0.712054] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 0.712091] pci_bus 0000:00: on NUMA node 0
[ 0.712094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.712187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.712226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.712247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.712270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.712341] \_SB_.PCI0:_OSC invalid UUID
[ 0.712342] _OSC request data:1 1f 1f
[ 0.712345] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.712386] \_SB_.PCI0:_OSC invalid UUID
[ 0.712387] _OSC request data:1 0 1d
[ 0.712390] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.712393] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.714833] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.714875] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.714915] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.714958] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.714997] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.715036] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.715078] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.715120] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.715241] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.715251] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.715255] vgaarb: loaded
[ 0.715257] vgaarb: bridge control possible 0000:01:00.0
[ 0.715259] vgaarb: no bridge control possible 0000:00:02.0
[ 0.715349] SCSI subsystem initialized
[ 0.715418] libata version 3.00 loaded.
[ 0.715469] usbcore: registered new interface driver usbfs
[ 0.715496] usbcore: registered new interface driver hub
[ 0.715526] usbcore: registered new device driver usb
[ 0.715656] PCI: Using ACPI for IRQ routing
[ 0.722839] PCI: pci_cache_line_size set to 64 bytes
[ 0.722989] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.722991] reserve RAM buffer: 000000009aabf000 - 000000009bffffff
[ 0.722993] reserve RAM buffer: 000000009b000000 - 000000009bffffff
[ 0.722994] reserve RAM buffer: 000000025f600000 - 000000025fffffff
[ 0.723157] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.723164] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.725179] Switching to clocksource hpet
[ 0.729073] pnp: PnP ACPI init
[ 0.729088] ACPI: bus type pnp registered
[ 0.729622] pnp 00:00: [bus 00-fe]
[ 0.729625] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.729626] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.729628] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.729630] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.729632] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.729634] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.729635] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.729637] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.729638] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.729640] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.729641] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.729643] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.729644] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.729646] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.729647] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.729649] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.729650] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.729652] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
[ 0.729653] pnp 00:00: [mem 0x25f600000-0x65f5fffff window]
[ 0.729731] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.729750] pnp 00:01: [io 0x0000-0x001f]
[ 0.729751] pnp 00:01: [io 0x0081-0x0091]
[ 0.729753] pnp 00:01: [io 0x0093-0x009f]
[ 0.729754] pnp 00:01: [io 0x00c0-0x00df]
[ 0.729756] pnp 00:01: [dma 4]
[ 0.729800] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.729807] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.729850] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.729916] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.729958] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.729967] pnp 00:04: [io 0x00f0]
[ 0.729975] pnp 00:04: [irq 13]
[ 0.730019] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.730028] pnp 00:05: [io 0x002e-0x002f]
[ 0.730030] pnp 00:05: [io 0x004e-0x004f]
[ 0.730031] pnp 00:05: [io 0x0061]
[ 0.730032] pnp 00:05: [io 0x0063]
[ 0.730033] pnp 00:05: [io 0x0065]
[ 0.730034] pnp 00:05: [io 0x0067]
[ 0.730036] pnp 00:05: [io 0x0070]
[ 0.730037] pnp 00:05: [io 0x0080]
[ 0.730038] pnp 00:05: [io 0x0092]
[ 0.730039] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.730040] pnp 00:05: [io 0x0680-0x069f]
[ 0.730042] pnp 00:05: [io 0x1000-0x100f]
[ 0.730043] pnp 00:05: [io 0xffff]
[ 0.730044] pnp 00:05: [io 0xffff]
[ 0.730045] pnp 00:05: [io 0x0400-0x0453]
[ 0.730047] pnp 00:05: [io 0x0458-0x047f]
[ 0.730048] pnp 00:05: [io 0x0500-0x057f]
[ 0.730050] pnp 00:05: [io 0x164e-0x164f]
[ 0.730052] pnp 00:05: [io 0x0454-0x0457]
[ 0.730053] pnp 00:05: [io 0x0380-0x0387]
[ 0.730054] pnp 00:05: [io 0x0068-0x006f]
[ 0.730118] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.730122] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.730125] system 00:05: [io 0xffff] has been reserved
[ 0.730128] system 00:05: [io 0xffff] has been reserved
[ 0.730131] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.730134] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.730137] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.730140] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.730143] system 00:05: [io 0x0454-0x0457] has been reserved
[ 0.730146] system 00:05: [io 0x0380-0x0387] has been reserved
[ 0.730150] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.730157] pnp 00:06: [io 0x0070-0x0077]
[ 0.730161] pnp 00:06: [irq 8]
[ 0.730204] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.730218] pnp 00:07: [io 0x0060]
[ 0.730219] pnp 00:07: [io 0x0064]
[ 0.730223] pnp 00:07: [irq 1]
[ 0.730280] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.730295] pnp 00:08: [irq 12]
[ 0.730344] pnp 00:08: Plug and Play ACPI device, IDs SYN1e60 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.730369] pnp 00:09: [irq 23]
[ 0.730414] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.730558] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.730559] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.730561] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.730562] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.730563] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.730565] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.730566] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.730568] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.730569] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.730570] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
[ 0.730633] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.730637] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.730641] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.730644] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.730647] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.730650] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.730654] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.730657] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.730660] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.730664] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.730668] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.730816] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 0.730817] pnp 00:0b: [mem 0x40000000-0x401fffff]
[ 0.730878] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.730882] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[ 0.730886] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.730900] pnp: PnP ACPI: found 12 devices
[ 0.730903] ACPI: ACPI bus type pnp unregistered
[ 0.739026] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.739033] PCI: max bus depth: 1 pci_try_num: 2
[ 0.739064] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2020000-0xc203ffff pref]
[ 0.739068] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.739071] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.739075] pci 0000:00:01.0: bridge window [mem 0xc2000000-0xc2ffffff]
[ 0.739079] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.739085] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 0.739091] pci 0000:00:1c.0: bridge window [mem 0xc3500000-0xc35fffff]
[ 0.739101] pci 0000:00:1c.1: PCI bridge to [bus 08-08]
[ 0.739105] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.739114] pci 0000:00:1c.1: bridge window [mem 0xc3400000-0xc34fffff 64bit pref]
[ 0.739122] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[ 0.739126] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.739132] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
[ 0.739138] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 0.739155] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.739159] pci 0000:00:01.0: setting latency timer to 64
[ 0.739168] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.739174] pci 0000:00:1c.0: setting latency timer to 64
[ 0.739181] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.739186] pci 0000:00:1c.1: setting latency timer to 64
[ 0.739195] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.739201] pci 0000:00:1c.2: setting latency timer to 64
[ 0.739205] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.739206] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.739208] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.739210] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.739211] pci_bus 0000:00: resource 8 [mem 0x25f600000-0x65f5fffff]
[ 0.739213] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.739215] pci_bus 0000:01: resource 1 [mem 0xc2000000-0xc2ffffff]
[ 0.739217] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.739219] pci_bus 0000:07: resource 1 [mem 0xc3500000-0xc35fffff]
[ 0.739220] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.739222] pci_bus 0000:08: resource 2 [mem 0xc3400000-0xc34fffff 64bit pref]
[ 0.739224] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.739225] pci_bus 0000:09: resource 1 [mem 0xc1000000-0xc1ffffff]
[ 0.739227] pci_bus 0000:09: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 0.739252] NET: Registered protocol family 2
[ 0.739287] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.739489] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.740028] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.740150] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.740153] TCP reno registered
[ 0.740156] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.740178] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.740268] NET: Registered protocol family 1
[ 0.740334] RPC: Registered named UNIX socket transport module.
[ 0.740337] RPC: Registered udp transport module.
[ 0.740339] RPC: Registered tcp transport module.
[ 0.740341] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.740353] pci 0000:00:02.0: Boot video device
[ 0.740369] pci 0000:00:14.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.741587] pci 0000:00:14.0: PCI INT A disabled
[ 0.741600] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.752260] pci 0000:00:1a.0: PCI INT A disabled
[ 0.752313] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.763242] pci 0000:00:1d.0: PCI INT A disabled
[ 0.763325] PCI: CLS 64 bytes, default 64
[ 0.763376] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.763380] Placing 64MB software IO TLB between ffff880096ab4000 - ffff88009aab4000
[ 0.763383] software IO TLB at phys 0x96ab4000 - 0x9aab4000
[ 0.763395] Simple Boot Flag at 0x44 set to 0x1
[ 0.764763] audit: initializing netlink socket (disabled)
[ 0.764772] type=2000 audit(1353671576.582:1): initialized
[ 0.767848] VFS: Disk quotas dquot_6.5.2
[ 0.767908] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.768217] DLM installed
[ 0.768956] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.769130] NTFS driver 2.1.30 [Flags: R/W].
[ 0.769225] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.769389] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.770306] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.770764] SGI XFS Quota Management subsystem
[ 0.770770] OCFS2 1.5.0
[ 0.770884] ocfs2: Registered cluster interface o2cb
[ 0.770941] ocfs2: Registered cluster interface user
[ 0.770944] OCFS2 DLMFS 1.5.0
[ 0.771014] OCFS2 User DLM kernel interface loaded
[ 0.771018] OCFS2 Node Manager 1.5.0
[ 0.771094] OCFS2 DLM 1.5.0
[ 0.771450] Btrfs loaded
[ 0.771741] GFS2 installed
[ 0.771749] msgmni has been set to 15734
[ 0.772704] async_tx: api initialized (async)
[ 0.772782] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.772804] io scheduler noop registered
[ 0.772807] io scheduler deadline registered
[ 0.772855] io scheduler cfq registered (default)
[ 0.772937] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.772962] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.773248] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.773326] vesafb: mode is 1024x768x16, linelength=2048, pages=41
[ 0.773329] vesafb: scrolling: redraw
[ 0.773332] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.773902] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90010680000, using 3072k, total 65472k
[ 0.799756] Console: switching to colour frame buffer device 128x48
[ 0.823987] fb0: VESA VGA frame buffer device
[ 0.824237] intel_idle: MWAIT substates: 0x21120
[ 0.824239] intel_idle: v0.4 model 0x2A
[ 0.824240] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.824384] ERST: Table is not found!
[ 0.824562] GHES: HEST is not enabled!
[ 0.827483] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.763962] Refined TSC clocksource calibration: 2494.333 MHz.
[ 1.764321] Switching to clocksource tsc
[ 3.905204] floppy0: no floppy controllers found
[ 3.906920] brd: module loaded
[ 3.907069] Compaq SMART2 Driver (v 2.6.0)
[ 3.907315] HP CISS Driver (v 3.6.26)
[ 3.907977] fnic: Cisco FCoE HBA Driver, ver 1.5.0.2
[ 3.908470] Adaptec aacraid driver 1.1-7[28000]-ms
[ 3.908764] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 3.909211] scsi: <fdomain> Detection failed (no card)
[ 3.909490] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
[ 3.909912] Emulex LightPulse Fibre Channel SCSI driver 8.3.27
[ 3.910197] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 3.910515] Brocade BFA FC/FCOE SCSI driver - version: 3.0.2.2
[ 3.918798] DC390: clustering now enabled by default. If you get problems load
[ 3.927122] with "disable_clustering=1" and report to maintainers
[ 3.935584] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 3.944213] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 3.953037] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
[ 3.961914] mpt2sas version 10.100.00.00 loaded
[ 3.970854] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 3.979946] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 3.989193] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 3.998656] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 4.008385] ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011)
[ 4.018318] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[ 4.028284] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 4.038301] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 4.048292] ahci 0000:00:1f.2: version 3.0
[ 4.048310] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.058347] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 4.068975] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[ 4.079273] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 4.089619] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.091610] scsi0 : ahci
[ 4.101854] scsi1 : ahci
[ 4.111880] scsi2 : ahci
[ 4.121732] scsi3 : ahci
[ 4.131446] scsi4 : ahci
[ 4.140944] scsi5 : ahci
[ 4.150187] ata1: SATA max UDMA/133 abar m2048@0xc3617000 port 0xc3617100 irq 41
[ 4.159564] ata2: DUMMY
[ 4.168710] ata3: DUMMY
[ 4.177742] ata4: DUMMY
[ 4.186680] ata5: SATA max UDMA/133 abar m2048@0xc3617000 port 0xc3617300 irq 41
[ 4.195890] ata6: DUMMY
[ 4.206738] scsi6 : pata_legacy
[ 4.215701] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 4.509394] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.518589] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.529244] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[ 4.538483] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.547741] ata5.00: ATAPI: hp DVD-RAM UJ8B1, H.03, max UDMA/100
[ 4.558600] ata1.00: configured for UDMA/100
[ 4.567899] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[ 4.577408] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 4.586696] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.586703] ata5.00: configured for UDMA/100
[ 4.604772] sd 0:0:0:0: [sda] Write Protect is off
[ 4.613728] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.613741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.622864] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8B1 H.03 PQ: 0 ANSI: 5
[ 4.637515] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.646716] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.655885] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.687162] sda: sda1 sda2 sda3 sda4 sda5
[ 4.696383] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.705696] scsi7 : pata_legacy
[ 4.714529] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 4.874252] I2O subsystem v1.325
[ 4.882882] i2o: max drivers = 8
[ 4.891382] I2O Configuration OSM v1.323
[ 4.899651] I2O Bus Adapter OSM v1.317
[ 4.907775] I2O Block Device OSM v1.325
[ 4.915856] I2O SCSI Peripheral OSM v1.316
[ 4.923776] I2O ProcFS OSM v1.316
[ 4.931533] Fusion MPT base driver 3.04.20
[ 4.939195] Copyright (c) 1999-2008 LSI Corporation
[ 4.946830] Fusion MPT SPI Host driver 3.04.20
[ 4.954397] Fusion MPT FC Host driver 3.04.20
[ 4.962051] Fusion MPT SAS Host driver 3.04.20
[ 4.969809] Fusion MPT misc device (ioctl) driver 3.04.20
[ 4.977764] mptctl: Registered with Fusion MPT base driver
[ 4.985864] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 4.994096] Fusion MPT LAN driver 3.04.20
[ 5.002261] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.010505] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.019005] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.019009] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 5.027588] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 5.036182] ehci_hcd 0000:00:1a.0: debug port 2
[ 5.048429] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 5.048443] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc3619000
[ 5.066665] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 5.075145] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.083637] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.092302] usb usb1: Product: EHCI Host Controller
[ 5.100851] usb usb1: Manufacturer: Linux 3.2.29 ehci_hcd
[ 5.109332] usb usb1: SerialNumber: 0000:00:1a.0
[ 5.117781] hub 1-0:1.0: USB hub found
[ 5.126042] hub 1-0:1.0: 2 ports detected
[ 5.134163] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.142362] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.142365] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 5.150464] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.158638] ehci_hcd 0000:00:1d.0: debug port 2
[ 5.170556] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 5.170568] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc3618000
[ 5.187509] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 5.195348] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.203094] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.210781] usb usb2: Product: EHCI Host Controller
[ 5.218410] usb usb2: Manufacturer: Linux 3.2.29 ehci_hcd
[ 5.226054] usb usb2: SerialNumber: 0000:00:1d.0
[ 5.233757] hub 2-0:1.0: USB hub found
[ 5.241284] hub 2-0:1.0: 2 ports detected
[ 5.248791] 116x: driver isp116x-hcd, 03 Nov 2005
[ 5.256340] driver isp1362-hcd, 2005-04-04
[ 5.263907] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.271702] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.279595] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.287626] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 5.287630] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.295651] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 5.303848] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 5.303861] xhci_hcd 0000:00:14.0: irq 21, io mem 0xc3600000
[ 5.311915] xhci_hcd 0000:00:14.0: Failed to enable MSI-X
[ 5.319918] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 5.319957] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.328141] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.336420] usb usb3: Product: xHCI Host Controller
[ 5.344678] usb usb3: Manufacturer: Linux 3.2.29 xhci_hcd
[ 5.352915] usb usb3: SerialNumber: 0000:00:14.0
[ 5.361170] xHCI xhci_add_endpoint called for root hub
[ 5.361172] xHCI xhci_check_bandwidth called for root hub
[ 5.361211] hub 3-0:1.0: USB hub found
[ 5.369321] hub 3-0:1.0: 4 ports detected
[ 5.377300] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.385281] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 5.393348] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.401481] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.409650] usb usb4: Product: xHCI Host Controller
[ 5.417828] usb usb4: Manufacturer: Linux 3.2.29 xhci_hcd
[ 5.426076] usb usb4: SerialNumber: 0000:00:14.0
[ 5.434232] xHCI xhci_add_endpoint called for root hub
[ 5.434233] xHCI xhci_check_bandwidth called for root hub
[ 5.434267] hub 4-0:1.0: USB hub found
[ 5.442288] hub 4-0:1.0: 4 ports detected
[ 5.460242] sl811: driver sl811-hcd, 19 May 2005
[ 5.468135] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 5.476242] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[ 5.484503] Initializing USB Mass Storage driver...
[ 5.492751] usbcore: registered new interface driver usb-storage
[ 5.500991] USB Mass Storage support registered.
[ 5.509238] usbcore: registered new interface driver ums-alauda
[ 5.517581] usbcore: registered new interface driver ums-cypress
[ 5.525797] usbcore: registered new interface driver ums-datafab
[ 5.533949] usbcore: registered new interface driver ums-freecom
[ 5.542050] usbcore: registered new interface driver ums-isd200
[ 5.549922] usbcore: registered new interface driver ums-jumpshot
[ 5.557669] usbcore: registered new interface driver ums-karma
[ 5.565201] usbcore: registered new interface driver ums-onetouch
[ 5.572648] usbcore: registered new interface driver ums-sddr09
[ 5.579996] usbcore: registered new interface driver ums-sddr55
[ 5.582344] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 5.582345] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.582511] hub 1-1:1.0: USB hub found
[ 5.582593] hub 1-1:1.0: 6 ports detected
[ 5.616466] usbcore: registered new interface driver ums-usbat
[ 5.623787] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.636957] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.644386] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.651812] mousedev: PS/2 mouse device common for all mice
[ 5.659185] rtc_cmos 00:06: RTC can wake from S4
[ 5.666660] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 5.674011] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 5.681417] md: linear personality registered for level -1
[ 5.684854] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 5.696167] md: raid0 personality registered for level 0
[ 5.703655] md: raid1 personality registered for level 1
[ 5.711022] md: raid10 personality registered for level 10
[ 5.718498] md: raid6 personality registered for level 6
[ 5.725951] md: raid5 personality registered for level 5
[ 5.733251] md: raid4 personality registered for level 4
[ 5.740288] md: multipath personality registered for level -4
[ 5.747392] device-mapper: uevent: version 1.0.3
[ 5.754432] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.762143] cpuidle: using governor ladder
[ 5.770133] cpuidle: using governor menu
[ 5.777331] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 5.777354] input: Speakup as /devices/virtual/input/input1
[ 5.777475] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 5.777491] speakup 3.1.6: initialized
[ 5.777492] synth name on entry is: (null)
[ 5.777537] TCP cubic registered
[ 5.777539] Initializing XFRM netlink socket
[ 5.777551] NET: Registered protocol family 17
[ 5.777562] Registering the dns_resolver key type
[ 5.799096] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 5.799099] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.799378] hub 2-1:1.0: USB hub found
[ 5.799437] hub 2-1:1.0: 6 ports detected
[ 5.879116] registered taskstats version 1
[ 5.887467] rtc_cmos 00:06: setting system clock to 2012-11-23 11:53:01 UTC (1353671581)
[ 5.895907] md: Waiting for all devices to be available before autodetect
[ 5.904409] md: If you don't use raid, use raid=noautodetect
[ 5.913273] md: Autodetecting RAID arrays.
[ 5.921816] md: Scanned 0 and added 0 devices.
[ 5.930325] md: autorun ...
[ 5.938658] md: ... autorun DONE.
[ 6.015844] EXT3-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[ 6.031788] EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[ 6.075670] usb 2-1.5: new high-speed USB device number 3 using ehci_hcd
[ 6.091629] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 6.100370] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[ 6.139655] devtmpfs: mounted
[ 6.149356] Freeing unused kernel memory: 848k freed
[ 6.158141] Write protecting the kernel read-only data: 16384k
[ 6.168725] Freeing unused kernel memory: 800k freed
[ 6.179591] Freeing unused kernel memory: 972k freed
[ 6.231886] usb 2-1.5: New USB device found, idVendor=0c45, idProduct=6458
[ 6.240547] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 6.249308] usb 2-1.5: Product: HP Webcam-50
[ 6.257974] usb 2-1.5: Manufacturer: DCQEK019I2FGMP
[ 7.192196] loop: module loaded
[ 7.401966] udevd[1529]: starting version 182
[ 8.567328] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.576359] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.585129] mei 0000:00:16.0: setting latency timer to 64
[ 8.585267] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 8.722781] Linux agpgart interface v0.103
[ 8.731749] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 8.741186] ACPI: AC Adapter [ACAD] (on-line)
[ 8.750381] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 8.760127] ACPI: Lid Switch [LID0]
[ 8.824691] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 8.834647] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 8.834653] ACPI: resource 0000:00:1f.3 [io 0x5040-0x505f] conflicts with ACPI region SMBI [io 0x5040-0x504f]
[ 8.834655] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.865629] ACPI: Battery Slot [BAT0] (battery present)
[ 8.876274] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.887290] ACPI: Power Button [PWRB]
[ 8.898123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.898188] wmi: Mapper loaded
[ 8.919813] ACPI: Power Button [PWRF]
[ 8.932835] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 8.943867] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 8.956021] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 8.956313] cfg80211: Calling CRDA to update world regulatory domain
[ 8.978207] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 9.065822] [drm] Initialized drm 1.1.0 20060810
[ 9.237302] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 9.248677] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880256035460), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 9.271932] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880256035668), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 9.296243] hp_accel: laptop model unknown, using default axes configuration
[ 9.296482] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 9.296486] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880256035460), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 9.296492] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880256035668), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 9.296534] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 9.296659] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 9.296666] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880256035460), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 9.296675] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880256035668), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 9.296720] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 9.296726] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880256035460), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 9.296734] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880256035668), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 9.364612] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.364632] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.573440] r8169 0000:08:00.0: setting latency timer to 64
[ 9.573512] r8169 0000:08:00.0: irq 44 for MSI/MSI-X
[ 9.573622] r8169 0000:08:00.0: eth0: RTL8105e at 0xffffc90000074000, 80:c1:6e:57:ba:46, XID 00c00000 IRQ 44
[ 9.575388] rt2800pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.575414] rt2800pci 0000:07:00.0: setting latency timer to 64
[ 9.579102] lis3lv02d: 8 bits 3DC sensor found
[ 9.616798] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 9.616908] Registered led device: hp::hddprotect
[ 9.616929] hp_accel: driver loaded
[ 9.656050] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.656183] Registered led device: rt2800pci-phy0::radio
[ 9.656200] Registered led device: rt2800pci-phy0::assoc
[ 9.656218] Registered led device: rt2800pci-phy0::quality
[ 9.668561] [Firmware Bug]: Invalid critical threshold (0)
[ 9.685969] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.701405] ACPI: Thermal Zone [TZ01] (55 C)
[ 10.001303] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400
[ 10.017372] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.033040] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 10.033064] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 10.053072] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 10.122221] [drm] radeon defaulting to kernel modesetting.
[ 10.138014] [drm] radeon kernel modesetting enabled.
[ 10.153697] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 10.169659] checking generic (b0000000 3ff0000) vs hw (a0000000 10000000)
[ 10.169673] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 10.185604] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.201539] radeon 0000:01:00.0: setting latency timer to 64
[ 10.201672] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x103C:0x1840).
[ 10.217753] [drm] register mmio base: 0xC2000000
[ 10.233634] [drm] register mmio size: 131072
[ 10.263935] cfg80211: World regulatory domain updated:
[ 10.279349] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.294692] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.309796] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.324456] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.338866] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.352910] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.543807] Linux video capture interface: v2.00
[ 10.692771] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 10.697419] uvcvideo: Found UVC 1.00 device HP Webcam-50 (0c45:6458)
[ 10.714410] input: HP Webcam-50 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8
[ 10.714461] usbcore: registered new interface driver uvcvideo
[ 10.714462] USB Video Class driver (1.1.1)
[ 10.758586] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.771527] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.784241] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.796939] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.809268] i915 0000:00:02.0: setting latency timer to 64
[ 12.495952] ATOM BIOS: P/Quanta
[ 12.507912] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 12.519965] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 12.531635] mtrr: no more MTRRs available
[ 12.542936] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 12.554199] [drm] RAM width 128bits DDR
[ 12.565436] [TTM] Zone kernel: Available graphics memory: 4029468 kiB.
[ 12.576647] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 12.587539] [TTM] Initializing pool allocator.
[ 12.598309] [drm] radeon: 2048M of VRAM memory ready
[ 12.608906] [drm] radeon: 512M of GTT memory ready.
[ 12.619303] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.629805] [drm] Driver supports precise vblank timestamp query.
[ 12.640320] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 12.640326] radeon 0000:01:00.0: radeon: using MSI.
[ 12.650808] [drm] radeon: irq initialized.
[ 12.660982] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 12.671385] [drm] Loading TURKS Microcode
[ 12.726079] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 12.736039] radeon 0000:01:00.0: WB enabled
[ 12.762125] [drm] ring test succeeded in 1 usecs
[ 12.771870] [drm] radeon: ib pool ready.
[ 12.781413] [drm] ib test succeeded in 0 usecs
[ 12.791021] [drm] Radeon Display Connectors
[ 12.800299] [drm] Internal thermal controller with fan control
[ 12.810452] [drm] radeon: power management initialized
[ 12.819965] No connectors reported connected with modes
[ 12.829259] [drm] Cannot find any crtc or sizes - going 1024x768
[ 12.841242] [drm] fb mappable at 0xA0142000
[ 12.850315] [drm] vram apper at 0xA0000000
[ 12.859450] [drm] size 3145728
[ 12.868610] [drm] fb depth is 24
[ 12.877802] [drm] pitch is 4096
[ 12.887026] checking generic (b0000000 3ff0000) vs hw (a0000000 10000000)
[ 12.887098] fb1: radeondrmfb frame buffer device
[ 12.896246] drm: registered panic notifier
[ 12.905265] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 12.914748] checking generic (b0000000 3ff0000) vs hw (b0000000 10000000)
[ 12.914751] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 12.923964] Console: switching to colour dummy device 80x25
[ 12.976921] mtrr: no more MTRRs available
[ 12.976926] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 12.977212] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 12.977216] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.977219] [drm] Driver supports precise vblank timestamp query.
[ 12.977236] vga_switcheroo: enabled
[ 12.977318] radeon atpx: version is 1
[ 12.977335] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 12.977342] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 13.521851] fbcon: inteldrmfb (fb0) is primary device
[ 13.745499] Console: switching to colour frame buffer device 170x48
[ 13.748335] fb0: inteldrmfb frame buffer device
[ 13.748512] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 13.759927] acpi device:05: registered as cooling_device4
[ 13.760104] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input12
[ 13.760187] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 13.762297] acpi device:0e: registered as cooling_device5
[ 13.762471] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 13.762541] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.762609] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[ 13.947910] Adding 1576956k swap on /dev/sda5. Priority:-1 extents:1 across:1576956k
[ 14.022369] fuse init (API version 7.17)
[ 15.085294] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 15.476316] ppdev: user-space parallel port driver
[ 15.479149] lp: driver loaded but no devices found
[ 25.152682] r8169 0000:08:00.0: eth0: link down
[ 25.152691] r8169 0000:08:00.0: eth0: link down
[ 26.835543] r8169 0000:08:00.0: eth0: link up
[ 36.864577] NET: Registered protocol family 10
[ 47.578730] eth0: no IPv6 routers present
[ 85.638570] ata1.00: configured for UDMA/100
[ 85.638575] ata1: EH complete
[ 87.546023] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 140.575848] nepomukservices[2660]: segfault at 0 ip (null) sp 00007fff43145d68 error 14 in nepomukservicestub[400000+7000]
[ 158.081177] nm-applet[2874]: segfault at d ip 00007fe3601d237e sp 00007fff03169390 error 4 in libc-2.15.so[7fe360188000+1b5000]
Re: Slackware64 14.0 e Wi-Fi
E quelli di lsmod, ifconfig e iwconfig.
Codice: Seleziona tutto
Module Size Used by
snd_seq_dummy 1455 0
snd_seq_oss 29048 0
snd_seq_midi_event 5620 1 snd_seq_oss
snd_seq 51265 5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device 5228 3 snd_seq,snd_seq_oss,snd_seq_dummy
snd_pcm_oss 39183 0
snd_mixer_oss 15404 1 snd_pcm_oss
ipv6 279979 28
cpufreq_ondemand 6252 4
acpi_cpufreq 5773 1
mperf 1171 1 acpi_cpufreq
freq_table 2475 2 acpi_cpufreq,cpufreq_ondemand
lp 9787 0
ppdev 5958 0
parport_pc 19423 0
parport 31427 3 parport_pc,ppdev,lp
fuse 66626 3
uvcvideo 62784 0
snd_hda_codec_hdmi 24057 1
snd_hda_codec_idt 55294 1
videodev 76679 1 uvcvideo
v4l2_compat_ioctl32 8660 1 videodev
joydev 9972 0
i915 419107 3
radeon 758810 0
ttm 53508 1 radeon
snd_hda_intel 23267 2
snd_hda_codec 81925 3 snd_hda_intel,snd_hda_codec_idt,snd_hda_codec_hdmi
video 11378 1 i915
drm_kms_helper 26133 2 radeon,i915
processor 25592 1 acpi_cpufreq
thermal 7983 0
rt2800pci 9372 0
rt2800lib 39864 1 rt2800pci
r8169 48922 0
rt2x00pci 4914 1 rt2800pci
rt2x00lib 34972 3 rt2x00pci,rt2800lib,rt2800pci
eeprom_93cx6 1336 1 rt2800pci
mac80211 227731 3 rt2x00lib,rt2x00pci,rt2800lib
hp_accel 16352 0
hp_wmi 7802 0
lis3lv02d 10845 1 hp_accel
psmouse 61704 0
thermal_sys 14578 3 thermal,processor,video
sparse_keymap 3016 1 hp_wmi
drm 187389 6 drm_kms_helper,ttm,radeon,i915
snd_hwdep 6324 1 snd_hda_codec
i2c_algo_bit 5319 2 radeon,i915
cfg80211 169025 2 mac80211,rt2x00lib
intel_agp 10864 1 i915
hwmon 1329 2 thermal_sys,radeon
serio_raw 4389 0
i2c_i801 8044 0
wmi 8403 1 hp_wmi
input_polldev 2874 1 lis3lv02d
evdev 9574 10
i2c_core 19978 7 i2c_i801,i2c_algo_bit,drm,drm_kms_helper,radeon,i915,videodev
intel_gtt 13833 3 intel_agp,i915
battery 11171 0
button 4529 1 i915
ac 3331 0
agpgart 27372 4 intel_gtt,intel_agp,drm,ttm
snd_pcm 72864 4 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi,snd_pcm_oss
snd_page_alloc 7081 2 snd_pcm,snd_hda_intel
mii 3987 1 r8169
rfkill 15428 3 cfg80211,hp_wmi
mei 32534 0
crc_ccitt 1323 1 rt2800lib
snd_timer 18798 2 snd_pcm,snd_seq
snd 57796 16 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_idt,snd_hda_codec_hdmi,snd_mixer_oss,snd_pcm_oss,snd_seq_device,snd_seq,snd_seq_oss
soundcore 5474 1 snd
loop 18192 0
Codice: Seleziona tutto
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.4 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::82c1:6eff:fe57:ba46 prefixlen 64 scopeid 0x20<link>
ether 80:c1:6e:57:ba:46 txqueuelen 1000 (Ethernet)
RX packets 869 bytes 676843 (660.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 860 bytes 324777 (317.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 44 base 0x4000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 08:ed:b9:06:3d:72 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Codice: Seleziona tutto
lo no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
eth0 no wireless extensions.
- 414N
- Iper Master
- Messaggi: 2922
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Slackware64 14.0 e Wi-Fi
Vediamo di fare il punto della situazione basandoci su quanto hai riportato:
Il primo dovrebbe accendere la scheda wireless (al momento sembra spenta perché riporta una potenza di trasmissione di 0 dBm) ed il secondo dovrebbe avviare una scansione dei dintorni.
- Nel tuo dmesg compaiono vari errori riguardanti il sottosistema WMI: Dubito siano questi che non ti permettano di far funzionare la wireless, tuttavia alcuni pulsanti funzione potrebbero non funzionare perché non riconosciuti.
Codice: Seleziona tutto
[ 9.237302] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236) [ 9.248677] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880256035460), AE_AML_BUFFER_LIMIT (20110623/psparse-536) [ 9.271932] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880256035668), AE_AML_BUFFER_LIMIT (20110623/psparse-536) [ 9.296243] hp_accel: laptop model unknown, using default axes configuration [ 9.296482] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236) [ 9.296486] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880256035460), AE_AML_BUFFER_LIMIT (20110623/psparse-536) [ 9.296492] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880256035668), AE_AML_BUFFER_LIMIT (20110623/psparse-536) [ 9.296534] input: HP WMI hotkeys as /devices/virtual/input/input5 [ 9.296659] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236) [ 9.296666] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880256035460), AE_AML_BUFFER_LIMIT (20110623/psparse-536) [ 9.296675] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880256035668), AE_AML_BUFFER_LIMIT (20110623/psparse-536) [ 9.296720] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236) [ 9.296726] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff880256035460), AE_AML_BUFFER_LIMIT (20110623/psparse-536) [ 9.296734] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880256035668), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
- Subito dopo la parte relativa al WMI, le interfacce di rete vengono inizializzate:Spunta un "firmware-bug" anche se non si capisce a chi sia relativo (presumo all'interfaccia wireless)
Codice: Seleziona tutto
[ 9.364612] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.364632] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.573440] r8169 0000:08:00.0: setting latency timer to 64 [ 9.573512] r8169 0000:08:00.0: irq 44 for MSI/MSI-X [ 9.573622] r8169 0000:08:00.0: eth0: RTL8105e at 0xffffc90000074000, 80:c1:6e:57:ba:46, XID 00c00000 IRQ 44 [ 9.575388] rt2800pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.575414] rt2800pci 0000:07:00.0: setting latency timer to 64 [ 9.579102] lis3lv02d: 8 bits 3DC sensor found [ 9.616798] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 [ 9.616908] Registered led device: hp::hddprotect [ 9.616929] hp_accel: driver loaded [ 9.656050] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.656183] Registered led device: rt2800pci-phy0::radio [ 9.656200] Registered led device: rt2800pci-phy0::assoc [ 9.656218] Registered led device: rt2800pci-phy0::quality [ 9.668561] [Firmware Bug]: Invalid critical threshold (0)
- Compaiono altri errori relativi al sottosistema DRM (qualche problema coi MTRR), un errore relativo ad ACPI ([Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS) ed un paio di SEGFAULT da parte di nepomukservices e networkmanager, probabilmente collegati e relativi al non corretto funzionamento della scheda wireless.
- Dagli output degli altri comandi, non mi pare che tu necessiti di un driver aggiuntivo, in quanto il kernel sembra riconoscere la tua scheda di rete wireless (è presente un'interfaccia wlan0).
Codice: Seleziona tutto
iwconfig wlan0 txpower auto
iwlist wlan0 scanning