Repository 32bit  Forum
Repository 64bit  Wiki

ATI Radeon 9250 e freeze schermo con accelerazione

Usate questo forum per richieste di aiuto e consigli sull'hardware montato nelle vostre macchine con GNU/Linux Slackware.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata e la versione del Kernel. Questi dati aiutano le persone che possono rispondere.
2) Citare il tipo di hardware coinvolto in modo dettagliato.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT. Non usare termini gergali come procio, mobo e simili per identificare i componenti hardware.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

ATI Radeon 9250 e freeze schermo con accelerazione

Messaggioda aLe46 » dom dic 18, 2005 12:04

Ciao!
Qualcuno è riuscito a far andare l'accelerazione 3d con i driver proprietari ati con la scheda in oggetto?

Una volta installato i driver , quando lancio startx mi si spegne lo schermo :x

Ho provato a seguire la guida della sezione howto ma nisba (quindi ho anche editato fstab ) ...

Qui posto log Xorg :

Codice: Seleziona tutto
 
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/darkstar:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.13 i686 [ELF]
Current Operating System: Linux darkstar 2.4.31 #6 Sun Jun 5 19:04:47 PDT 2005 i686
Build Date: 11 September 2005
   Before reporting problems, check http://wiki.X.Org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 18 11:41:53 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo/".
   Entry deleted from font path.
   (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.2
   X.Org Video Driver: 0.7
   X.Org XInput driver : 0.4
   X.Org Server Extension : 0.2
   X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 1043,8070 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 05 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 05 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 1043,8028 rev 05 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 1043,8028 rev 05 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 1043,8028 rev 05 class 0c,05,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 1043,8028 rev 05 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5960 card 1043,0054 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5940 card 1043,0055 rev 01 class 03,80,00 hdr 00
(II) PCI: 02:03:0: chip 13f6,0111 card 1043,80e2 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:0a:0: chip 11c1,0440 card 11c1,0440 rev 01 class 07,80,00 hdr 00
(II) PCI: 02:0c:0: chip 1106,3043 card 1186,1400 rev 06 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
   [0] -1   0   0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
   [0] -1   0   0xde800000 - 0xdfefffff (0x1700000) MX[B]
(II) Bus 1 prefetchable memory range:
   [0] -1   0   0xe0000000 - 0xf7ffffff (0x18000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
   [0] -1   0   0x0000a000 - 0x0000a0ff (0x100) IX[B]
   [1] -1   0   0x0000a400 - 0x0000a4ff (0x100) IX[B]
   [2] -1   0   0x0000a800 - 0x0000a8ff (0x100) IX[B]
   [3] -1   0   0x0000ac00 - 0x0000acff (0x100) IX[B]
   [4] -1   0   0x0000b000 - 0x0000b0ff (0x100) IX[B]
   [5] -1   0   0x0000b400 - 0x0000b4ff (0x100) IX[B]
   [6] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B]
   [7] -1   0   0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
   [0] -1   0   0xdd800000 - 0xde7fffff (0x1000000) MX[B]
(II) Bus 2 prefetchable memory range:
   [0] -1   0   0xdff00000 - 0xdfffffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5960) rev 1, Mem @ 0xf0000000/27, 0xdf000000/16, I/O @ 0xd800/8, BIOS @ 0xeffe0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5940) rev 1, Mem @ 0xe0000000/27, 0xde800000/16
(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
   [0] -1   0   0xdd800000 - 0xdd80007f (0x80) MX[B]
   [1] -1   0   0xde000000 - 0xde0000ff (0x100) MX[B]
   [2] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [3] -1   0   0xde800000 - 0xde80ffff (0x10000) MX[B](B)
   [4] -1   0   0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
   [5] -1   0   0xeffe0000 - 0xefffffff (0x20000) MX[B](B)
   [6] -1   0   0xdf000000 - 0xdf00ffff (0x10000) MX[B](B)
   [7] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [8] -1   0   0x0000a800 - 0x0000a87f (0x80) IX[B]
   [9] -1   0   0x0000b000 - 0x0000b0ff (0x100) IX[B]
   [10] -1   0   0x0000b400 - 0x0000b407 (0x8) IX[B]
   [11] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B]
   [12] -1   0   0x00009000 - 0x0000901f (0x20) IX[B]
   [13] -1   0   0x0000e800 - 0x0000e80f (0x10) IX[B]
   [14] -1   0   0x00009400 - 0x0000941f (0x20) IX[B]
   [15] -1   0   0x00009800 - 0x0000980f (0x10) IX[B]
   [16] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
   [0] -1   0   0xdd800000 - 0xdd80007f (0x80) MX[B]
   [1] -1   0   0xde000000 - 0xde0000ff (0x100) MX[B]
   [2] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [3] -1   0   0xde800000 - 0xde80ffff (0x10000) MX[B](B)
   [4] -1   0   0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
   [5] -1   0   0xeffe0000 - 0xefffffff (0x20000) MX[B](B)
   [6] -1   0   0xdf000000 - 0xdf00ffff (0x10000) MX[B](B)
   [7] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [8] -1   0   0x0000a800 - 0x0000a87f (0x80) IX[B]
   [9] -1   0   0x0000b000 - 0x0000b0ff (0x100) IX[B]
   [10] -1   0   0x0000b400 - 0x0000b407 (0x8) IX[B]
   [11] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B]
   [12] -1   0   0x00009000 - 0x0000901f (0x20) IX[B]
   [13] -1   0   0x0000e800 - 0x0000e80f (0x10) IX[B]
   [14] -1   0   0x00009400 - 0x0000941f (0x20) IX[B]
   [15] -1   0   0x00009800 - 0x0000980f (0x10) IX[B]
   [16] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xdd800000 - 0xdd80007f (0x80) MX[B]
   [6] -1   0   0xde000000 - 0xde0000ff (0x100) MX[B]
   [7] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [8] -1   0   0xde800000 - 0xde80ffff (0x10000) MX[B](B)
   [9] -1   0   0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
   [10] -1   0   0xeffe0000 - 0xefffffff (0x20000) MX[B](B)
   [11] -1   0   0xdf000000 - 0xdf00ffff (0x10000) MX[B](B)
   [12] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [13] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [14] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [15] -1   0   0x0000a800 - 0x0000a87f (0x80) IX[B]
   [16] -1   0   0x0000b000 - 0x0000b0ff (0x100) IX[B]
   [17] -1   0   0x0000b400 - 0x0000b407 (0x8) IX[B]
   [18] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B]
   [19] -1   0   0x00009000 - 0x0000901f (0x20) IX[B]
   [20] -1   0   0x0000e800 - 0x0000e80f (0x10) IX[B]
   [21] -1   0   0x00009400 - 0x0000941f (0x20) IX[B]
   [22] -1   0   0x00009800 - 0x0000980f (0x10) IX[B]
   [23] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.2
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
   compiled for 6.8.2, module version = 2.1.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
   compiled for 6.8.0, module version = 8.20.8
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
   RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
   MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
   RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
   RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
   MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
   FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
   RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
   RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
   RADEON 9600 PRO (RV360 4152),
   MOBILITY RADEON 9600/9700 (M10/M11 4E50),
   MOBILITY RADEON 9550 (M12 4E56), RADEON 9500 (R300 4144),
   RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
   RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
   RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
   RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
   FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
   RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
   FireGL X2-256/X2-256t (R350 4E4B),
   MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
   RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
   FireGL V3100 (RV370 5B64), MOBILITY RADEON X300 (M22 5460),
   MOBILITY RADEON X600 (M24 5462), MOBILITY FireGL V3100 (M22 5464),
   RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
   MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
   MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
   RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
   RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
   FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
   RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
   RADEON X800 PRO (R423 5549),
   RADEON X800 XT Platinum Edition (R423 554A),
   RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
   FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
   MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
   RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
   RADEON X850 XT Platinum Edition (R480 5D4D),
   RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
   MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
   FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
   RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
   RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
   RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
   MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL,
   RADEON 9100 IGP (RS300 5834),
   RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
   MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
   RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
   RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
   RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
   RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.20.8
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.20g1                           
(II) ATI Proprietary Linux Driver Build Date: Dec  6 2005 20:05:53
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.20.1-driver-lnx-232334
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9250 (RV280 5960) found
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xdd800000 - 0xdd80007f (0x80) MX[B]
   [6] -1   0   0xde000000 - 0xde0000ff (0x100) MX[B]
   [7] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [8] -1   0   0xde800000 - 0xde80ffff (0x10000) MX[B](B)
   [9] -1   0   0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
   [10] -1   0   0xeffe0000 - 0xefffffff (0x20000) MX[B](B)
   [11] -1   0   0xdf000000 - 0xdf00ffff (0x10000) MX[B](B)
   [12] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [13] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [14] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [15] -1   0   0x0000a800 - 0x0000a87f (0x80) IX[B]
   [16] -1   0   0x0000b000 - 0x0000b0ff (0x100) IX[B]
   [17] -1   0   0x0000b400 - 0x0000b407 (0x8) IX[B]
   [18] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B]
   [19] -1   0   0x00009000 - 0x0000901f (0x20) IX[B]
   [20] -1   0   0x0000e800 - 0x0000e80f (0x10) IX[B]
   [21] -1   0   0x00009400 - 0x0000941f (0x20) IX[B]
   [22] -1   0   0x00009800 - 0x0000980f (0x10) IX[B]
   [23] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x821c5b8
(II) resource ranges after probing:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xdd800000 - 0xdd80007f (0x80) MX[B]
   [6] -1   0   0xde000000 - 0xde0000ff (0x100) MX[B]
   [7] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [8] -1   0   0xde800000 - 0xde80ffff (0x10000) MX[B](B)
   [9] -1   0   0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
   [10] -1   0   0xeffe0000 - 0xefffffff (0x20000) MX[B](B)
   [11] -1   0   0xdf000000 - 0xdf00ffff (0x10000) MX[B](B)
   [12] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [13] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [14] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [15] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [16] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [17] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [18] -1   0   0x0000a800 - 0x0000a87f (0x80) IX[B]
   [19] -1   0   0x0000b000 - 0x0000b0ff (0x100) IX[B]
   [20] -1   0   0x0000b400 - 0x0000b407 (0x8) IX[B]
   [21] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B]
   [22] -1   0   0x00009000 - 0x0000901f (0x20) IX[B]
   [23] -1   0   0x0000e800 - 0x0000e80f (0x10) IX[B]
   [24] -1   0   0x00009400 - 0x0000941f (0x20) IX[B]
   [25] -1   0   0x00009800 - 0x0000980f (0x10) IX[B]
   [26] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
   [27] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [28] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "(null)"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9250 (RV280 5960)" (Chipset = 0x5960)
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x0054)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xf0000000
(--) fglrx(0): MMIO registers at 0xdf000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.1.0
   ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON 9200
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: V280
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/X11R6/lib/modules/linux/libdrm.a
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): Connected Display1: CRT on secondary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: GSM  Model: 430b  Serial#: 78686
(II) fglrx(0): Year: 2002  Week: 39
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Signal levels configurable
(II) fglrx(0): Sync:  Separate  Composite
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33  vert.: 25
(II) fglrx(0): Gamma: 2.83
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.632 redY: 0.330   greenX: 0.273 greenY: 0.605
(II) fglrx(0): blueX: 0.142 blueY: 0.063   whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 720x400@88Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@87Hz (interlaced)
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
(II) fglrx(0): #1: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) fglrx(0): #2: hsize: 800  vsize 600  refresh: 75  vid: 20293
(II) fglrx(0): #3: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) fglrx(0): #4: hsize: 1024  vsize 768  refresh: 75  vid: 20321
(II) fglrx(0): #5: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) fglrx(0): #6: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #7: hsize: 832  vsize 624  refresh: 75  vid: 20297
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 94.5 MHz   Image Size:  310 x 230 mm
(II) fglrx(0): h_active: 1024  h_sync: 1072  h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 808 v_border: 0
(II) fglrx(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 70 kHz, PixClock max 110 MHz
(II) fglrx(0): Monitor name: StudioWorks 7
(II) fglrx(0): Monitor name: 00S
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3.  1 power state available:
(II) fglrx(0):   1. 239/200MHz @ 50Hz [enable load balancing]
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(**) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 32 modes found for primary display.
(--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808
(**) fglrx(0):  Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.43  1024 1080 1192 1360  768 769 772 801 +hsync
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 772 817 interlace
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"   56.25  800 832 896 1048  600 601 604 631
(**) fglrx(0):  Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"   45.50  800 840 920 1040  600 601 604 625 +hsync
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
(**) fglrx(0):  Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600"   29.61  800 816 896 992  600 601 604 635 interlace +hsync
(**) fglrx(0):  Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"   68.18  800 848 936 1072  600 601 604 636 +hsync
(**) fglrx(0):  Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"   60.06  800 840 928 1056  600 601 604 632 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"   52.41  640 680 744 848  480 481 484 515 +hsync
(**) fglrx(0):  Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"   43.16  640 680 744 848  480 481 484 509 +hsync
(**) fglrx(0):  Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"   37.89  640 672 736 832  480 481 484 506 +hsync
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"   28.07  640 696 736 832  400 413 415 449
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
(**) fglrx(0):  Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"   19.68  512 528 576 632  384 384 385 416
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   19.81  512 544 624 664  384 451 453 497
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 601 602 625 doublescan
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   15.75  320 328 360 416  240 481 482 501 doublescan
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   13.10  320 352 368 416  200 406 407 417 doublescan
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (330, 250) mm
(--) fglrx(0): DPI set to (78, 78)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.2.0
   ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
   compiled for 6.8.0, module version = 8.20.8
   ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x000006b3
(==) fglrx(0): OpenGL ClientDriverName: "atiogl_a_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] 0   0   0xdf000000 - 0xdf00ffff (0x10000) MX[B]
   [1] 0   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
   [2] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [3] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [4] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [5] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [6] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [7] -1   0   0xdd800000 - 0xdd80007f (0x80) MX[B]
   [8] -1   0   0xde000000 - 0xde0000ff (0x100) MX[B]
   [9] -1   0   0xf8000000 - 0xf7ffffff (0x0) MX[B]O
   [10] -1   0   0xde800000 - 0xde80ffff (0x10000) MX[B](B)
   [11] -1   0   0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
   [12] -1   0   0xeffe0000 - 0xefffffff (0x20000) MX[B](B)
   [13] -1   0   0xdf000000 - 0xdf00ffff (0x10000) MX[B](B)
   [14] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [15] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [16] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [17] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [18] 0   0   0x0000d800 - 0x0000d8ff (0x100) IX[B]
   [19] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [20] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [21] -1   0   0x0000a800 - 0x0000a87f (0x80) IX[B]
   [22] -1   0   0x0000b000 - 0x0000b0ff (0x100) IX[B]
   [23] -1   0   0x0000b400 - 0x0000b407 (0x8) IX[B]
   [24] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX[B]
   [25] -1   0   0x00009000 - 0x0000901f (0x20) IX[B]
   [26] -1   0   0x0000e800 - 0x0000e80f (0x10) IX[B]
   [27] -1   0   0x00009400 - 0x0000941f (0x20) IX[B]
   [28] -1   0   0x00009800 - 0x0000980f (0x10) IX[B]
   [29] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
   [30] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [31] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM Bus area:     0xf0501000 (size=0x07aff000)
(II) fglrx(0): UMM area:     0xf0501000 (size=0x07aff000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 6.8.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf0bde000
(II) fglrx(0): [drm] mapped SAREA 0xf0bde000 to 0x40024000
(II) fglrx(0): [drm] framebuffer handle = 0xf0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.20.8
(II) fglrx(0):     Date: Dec  6 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.4.31
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xdf000000
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x1a30
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000314)
(II) fglrx(0): [agp] graphics chipset has AGP v2.0
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xf0cf5000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xf0000000 FBMappedSize: 0x00501000
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,1281)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor (scanline 768)
(II) fglrx(0): Largest offscreen area available: 1024 x 505
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Solid Lines
   Dashed Lines
   Offscreen Pixmaps
   Setting up tile and stipple cache:
      24 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
Avatar utente
aLe46
Linux 2.4
Linux 2.4
 
Messaggi: 257
Iscritto il: gio feb 10, 2005 0:00

Messaggioda aLe46 » dom dic 18, 2005 12:11

Xorg.conf generato da driver ATI :

Codice: Seleziona tutto

# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath   "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc105"
    Option "XkbLayout"   "it"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "(null)"
    Option "ScreenOverlap"              "0"
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
    Option "CapabilitiesEx"             "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=5960
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###


Avatar utente
aLe46
Linux 2.4
Linux 2.4
 
Messaggi: 257
Iscritto il: gio feb 10, 2005 0:00

Messaggioda alessiodf » dom dic 18, 2005 13:01

Io ho una ati come la tua, ma ci ho rinunciato a mettere i driver proprietari ATI... Uso quelli nativi del kernel, che alla fine vanno + che bene! :D 40frame/sec a 1280x1024 :D
Avatar utente
alessiodf
Linux 2.6
Linux 2.6
 
Messaggi: 823
Iscritto il: ven ott 14, 2005 20:04
Località: Roma
Slackware: current
Kernel: 2.6.26.4
Desktop: Kde 4.1


Torna a Hardware

Chi c’è in linea

Visitano il forum: Nessuno e 1 ospite

cron