Repository 32bit  Forum
Repository 64bit  Wiki

Driver radeon non funzionanti

Usate questo forum per richieste di aiuto e consigli sull'hardware montato nelle vostre macchine con GNU/Linux Slackware.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata e la versione del Kernel. Questi dati aiutano le persone che possono rispondere.
2) Citare il tipo di hardware coinvolto in modo dettagliato.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT. Non usare termini gergali come procio, mobo e simili per identificare i componenti hardware.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

Re: Driver radeon non funzionanti

Messaggioda Blallo » lun apr 13, 2009 14:46

mmmm...da tuo xorg intanto potresti togliere la sezione
Codice: Seleziona tutto
# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam   256

#    Clocks     25.2 28.3

EndSection

e poi vai sul sito di sardylan...c'è un pacchetto tar.bz2 che contiene tutti i tgz aggiornati per il driver radeon...io lo uso sula mia radeon x1300 che è più recente della tua e funge (oddio non è il massimo della fluidità ma qualcosa fa)
Io sono il detective Arsenio Magret, e porto sempre la camicia TATUATA!
Avatar utente
Blallo
Packager
Packager
 
Messaggi: 3243
Iscritto il: ven ott 12, 2007 10:37
Località: Torino / Torremaggiore (FG)
Nome Cognome: Savino Liguori
Slackware: 14.1 / 12.2
Kernel: 3.12.2-ck
Desktop: Openbox

Re: Driver radeon non funzionanti

Messaggioda ulisse89 » lun apr 13, 2009 16:42

Guarda per adesso sul sito non riesco a entrare (internal server error). Comunque appena posso faccio come hai detto.
Avatar utente
ulisse89
Packager
Packager
 
Messaggi: 644
Iscritto il: sab gen 17, 2009 12:53
Località: Bologna
Nome Cognome: Riccardo
Slackware: 13.0
Kernel: 2.6.29.6
Desktop: Xfce

Re: Driver radeon non funzionanti

Messaggioda ulisse89 » mar apr 14, 2009 11:22

Ho scaricato i driver aggiornati dal sito che mi hai detto. Ancora non va. Ho letto sul Xorg wiki e mi sembra possibile che la scheda che ho non sia supportata dai driver open. Può essere? O il problema sta solo nella configurazione di xorg?
Avatar utente
ulisse89
Packager
Packager
 
Messaggi: 644
Iscritto il: sab gen 17, 2009 12:53
Località: Bologna
Nome Cognome: Riccardo
Slackware: 13.0
Kernel: 2.6.29.6
Desktop: Xfce

Re: Driver radeon non funzionanti

Messaggioda Blallo » mer apr 15, 2009 11:51

posta il tuo attuale xorg
Io sono il detective Arsenio Magret, e porto sempre la camicia TATUATA!
Avatar utente
Blallo
Packager
Packager
 
Messaggi: 3243
Iscritto il: ven ott 12, 2007 10:37
Località: Torino / Torremaggiore (FG)
Nome Cognome: Savino Liguori
Slackware: 14.1 / 12.2
Kernel: 3.12.2-ck
Desktop: Openbox

Re: Driver radeon non funzionanti

Messaggioda ulisse89 » mer apr 15, 2009 12:29

Codice: Seleziona tutto
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
#    Mode 0666
# EndSection

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
   Identifier     "Simple Layout"
   Screen      0  "aticonfig-Screen[0]-0" 0 0
   InputDevice    "Mouse1" "CorePointer"
   InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
#    RgbPath   "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
#    FontPath   "/usr/lib/X11/fonts/local/"
# The module search path.  The default path is shown here.
#    ModulePath "/usr/lib/xorg/modules"
   FontPath     "/usr/share/fonts/TTF"
   FontPath     "/usr/share/fonts/OTF"
   FontPath     "/usr/share/fonts/Type1"
   FontPath     "/usr/share/fonts/misc"
   FontPath     "/usr/share/fonts/75dpi/:unscaled"
   FontPath     "/usr/lib/X11/fonts/misc/"
   FontPath     "/usr/lib/X11/fonts/75dpi/:unscaled"
   FontPath     "/usr/lib/X11/fonts/100dpi/:unscaled"
   FontPath     "/usr/lib/X11/fonts/Speedo/"
   FontPath     "/usr/lib/X11/fonts/Type1/"
   FontPath     "/usr/lib/X11/fonts/TTF/"
   FontPath     "/usr/lib/X11/fonts/OTF/"
   FontPath     "/usr/lib/X11/fonts/cyrillic/"
   FontPath     "/usr/lib/X11/fonts/75dpi/"
   FontPath     "/usr/lib/X11/fonts/100dpi/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
#    Load        "type1"
# This loads the GLX module
#    Load       "dri"
   Load  "dbe"     # Double buffer extension
   SubSection "extmod"
      Option       "omit xfree86-dga"   # don't initialise the DGA extension
   EndSubSection
   Load  "freetype"
#    Load        "xtt"
   Load  "glx"
# This loads the DRI module
EndSection

Section "InputDevice"

#    Option   "Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"
# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""
#    Option "XkbDisable"
   Identifier  "Keyboard1"
   Driver      "kbd"
   Option       "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
   Option       "XkbRules" "xorg"
   Option       "XkbModel" "pc101"
   Option       "XkbLayout" "it"
EndSection

Section "InputDevice"

# Identifier and driver
#    Option "Resolution"   "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"   "9600"
#    Option "SampleRate"   "150"
# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
   Identifier  "Mouse1"
   Driver      "mouse"
   Option       "Protocol" "IMPS/2"   # IntelliMouse PS/2
   Option       "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
   Option       "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync   30-64         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
   Identifier   "My Monitor"
   HorizSync    31.5 - 64.3
   VertRefresh  50.0 - 90.0
EndSection

Section "Monitor"
   Identifier   "aticonfig-Monitor[0]-0"
   Option       "VendorName" "ATI Proprietary Driver"
   Option       "ModelName" "Generic Autodetecting Monitor"
   Option       "DPMS" "true"
EndSection

Section "Device"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset   "generic"
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.
#    BusID      "PCI:0:10:0"
#    VideoRam   256
#    Clocks   25.2 28.3
   Identifier  "Standard VGA"
   Driver      "vga"
   VendorName  "Unknown"
   BoardName   "Unknown"
EndSection

Section "Device"

    #VideoRam    131072
    # Insert Clocks lines here if appropriate
   Identifier  "* Generic VESA compatible"
   Driver      "vesa"
EndSection

Section "Device"
   Identifier  "aticonfig-Device[0]-0"
   Driver      "fglrx"
   BusID       "PCI:1:0:0"
EndSection

Section "Screen"
   Identifier "Screen 1"
   Device     "* Generic VESA compatible"
   Monitor    "My Monitor"
   DefaultDepth     24
   SubSection "Display"
      Viewport   0 0
      Depth     8
      Modes    "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     16
      Modes    "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
      Modes    "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "Screen"
   Identifier "aticonfig-Screen[0]-0"
   Device     "aticonfig-Device[0]-0"
   Monitor    "aticonfig-Monitor[0]-0"
   DefaultDepth     24
   SubSection "Display"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection


Questo è quello che ho attualmente usando i proprietari.
Avatar utente
ulisse89
Packager
Packager
 
Messaggi: 644
Iscritto il: sab gen 17, 2009 12:53
Località: Bologna
Nome Cognome: Riccardo
Slackware: 13.0
Kernel: 2.6.29.6
Desktop: Xfce

Re: Driver radeon non funzionanti

Messaggioda ulisse89 » mar apr 21, 2009 11:39

Tiro fuori di nuovo questo topic per dire che ho appena reinstallato slackware 12.2 (perchè avevo fatto un casino) ed ora funzionano i driver radeon. Questa è una cosa strana considerando che i driver in questione non hanno mai funzionato, ed avevo già reinstallato la slackware 12.2 altre volte. L'ho installata come ho sempre fatto e non ho cambiato niente (ho usato anche lo stesso dvd).
Per pura curiosità, qualcuno saprebbe dirmi il motivo di questo? Così magari capisco anche perchè prima non funzionavano.
Grazie.
Avatar utente
ulisse89
Packager
Packager
 
Messaggi: 644
Iscritto il: sab gen 17, 2009 12:53
Località: Bologna
Nome Cognome: Riccardo
Slackware: 13.0
Kernel: 2.6.29.6
Desktop: Xfce

Re: Driver radeon non funzionanti

Messaggioda Blallo » mar apr 21, 2009 21:18

probabilmente le mesa dei proprietari ti facevano troppo conflitto con i radeon...ora che sono le mesa originali di una slack pulita va tutto bene :thumbright:
Io sono il detective Arsenio Magret, e porto sempre la camicia TATUATA!
Avatar utente
Blallo
Packager
Packager
 
Messaggi: 3243
Iscritto il: ven ott 12, 2007 10:37
Località: Torino / Torremaggiore (FG)
Nome Cognome: Savino Liguori
Slackware: 14.1 / 12.2
Kernel: 3.12.2-ck
Desktop: Openbox

Precedente

Torna a Hardware

Chi c’è in linea

Visitano il forum: Nessuno e 1 ospite

cron