Repository 32bit  Forum
Repository 64bit  Wiki

Strani messaggi errore hard disk esterno: drdy err

Usate questo forum per richieste di aiuto e consigli sull'hardware montato nelle vostre macchine con GNU/Linux Slackware.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata e la versione del Kernel. Questi dati aiutano le persone che possono rispondere.
2) Citare il tipo di hardware coinvolto in modo dettagliato.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT. Non usare termini gergali come procio, mobo e simili per identificare i componenti hardware.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

Strani messaggi errore hard disk esterno: drdy err

Messaggioda sberla54 » lun ago 10, 2009 20:47

Ciao a tutti ragazzi!

In sti giorni mi sto un attimo preoccupando per la salute del mio hard disk esterno usb che utilizzo giornalmente per i backup e che rimane montato 24h su 24, anche se per la maggior parte del tempo non effettuo nessun accesso e quindi non viene utilizzato; mi limito a fare un backup completo ogni notte alle 6, direi da poco piu' di 1 anno a questa parte.

Negli scorsi giorni ho spento il pc (dopo qualche settimana che non lo facevo) e questo e' stato il dmesg:
Codice: Seleziona tutto
d
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved
system 00:0c: iomem range 0xfff90000-0xfffbffff could not be reserved
system 00:0c: iomem range 0xfffed000-0xfffeffff could not be reserved
pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
pci 0000:00:09.0:   IO window: disabled
pci 0000:00:09.0:   MEM window: disabled
pci 0000:00:09.0:   PREFETCH window: disabled
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0b.0:   IO window: disabled
pci 0000:00:0b.0:   MEM window: disabled
pci 0000:00:0b.0:   PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0c.0:   IO window: disabled
pci 0000:00:0c.0:   MEM window: disabled
pci 0000:00:0c.0:   PREFETCH window: disabled
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0d.0:   IO window: disabled
pci 0000:00:0d.0:   MEM window: disabled
pci 0000:00:0d.0:   PREFETCH window: disabled
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:0e.0:   IO window: 0xa000-0xafff
pci 0000:00:0e.0:   MEM window: 0xfb000000-0xfdffffff
pci 0000:00:0e.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [0, 0]
bus: 01 index 2 mmio: [0, 0]
bus: 01 index 3 io port: [0, ffff]
bus: 01 index 4 mmio: [0, ffffffff]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [0, 0]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [0, 0]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 mmio: [0, 0]
bus: 04 index 1 mmio: [0, 0]
bus: 04 index 2 mmio: [0, 0]
bus: 04 index 3 mmio: [0, 0]
bus: 05 index 0 io port: [a000, afff]
bus: 05 index 1 mmio: [fb000000, fdffffff]
bus: 05 index 2 mmio: [d0000000, dfffffff]
bus: 05 index 3 mmio: [0, 0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Nov 20 2008 22:30:39) installed
msgmni has been set to 1738
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:0b.0: Linking AER extended capability
pci 0000:00:0c.0: Linking AER extended capability
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:05:00.0: Boot video device
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: found MSI capability
pci_express 0000:00:0b.0:pcie00: allocate port service
pci_express 0000:00:0b.0:pcie03: allocate port service
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: found MSI capability
pci_express 0000:00:0c.0:pcie00: allocate port service
pci_express 0000:00:0c.0:pcie03: allocate port service
pcieport-driver 0000:00:0d.0: setting latency timer to 64
pcieport-driver 0000:00:0d.0: found MSI capability
pci_express 0000:00:0d.0:pcie00: allocate port service
pci_express 0000:00:0d.0:pcie03: allocate port service
pcieport-driver 0000:00:0e.0: setting latency timer to 64
pcieport-driver 0000:00:0e.0: found MSI capability
pci_express 0000:00:0e.0:pcie00: allocate port service
pci_express 0000:00:0e.0:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 1536k, total 262144k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at c000:c2e0
vesafb: pmi: set display start = c00cc316, set palette = c00cc380
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:06.0: UDMA133 controller
amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xf2)
amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xe800-0xe807
    ide1: BM-DMA at 0xe808-0xe80f
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive
hdb: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI 52X DVD-ROM drive, 256kB Cache
ide-floppy driver 1.00
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Copyright(c) 2004-2008 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
   with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:07.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 23
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.0: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 22
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 22
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD5000AAKS-22A7B0, 01.03B01, max UDMA/133
ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133
ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-2 01.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 4:0:0:0: [sda] Attached SCSI disk
scsi 5:0:0:0: Direct-Access     ATA      MAXTOR STM350032 MX15 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.7-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.7-smp ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
isp1760 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
memory length for this resource is less than required
isp1760: probe of 0000:00:0a.0 failed with error -12
Initializing USB Mass Storage driver...
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=0bc2, idProduct=3000
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: FreeAgentDesktop
usb 1-1: Manufacturer: Seagate
usb 1-1: SerialNumber:             6QG0GTG6
usb 1-4: new high speed USB device using ehci_hcd and address 5
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-4: New USB device found, idVendor=05e3, idProduct=0608
usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: USB2.0 Hub
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: New USB device found, idVendor=046d, idProduct=c040
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB-PS/2 Optical Mouse
usb 2-2: Manufacturer: Logitech
usb 2-3: new full speed USB device using ohci_hcd and address 3
usb 2-3: configuration #1 chosen from 1 choice
usb 2-3: New USB device found, idVendor=03f0, idProduct=3f11
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: psc 1310 series
usb 2-3: Manufacturer: hp
usb 2-3: SerialNumber: CN48JB50XQO2
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 1-4.4: new high speed USB device using ehci_hcd and address 6
usb 1-4.4: configuration #1 chosen from 1 choice
usb 1-4.4: New USB device found, idVendor=058f, idProduct=6362
usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.4: Product: Mass Storage Device
usb 1-4.4: Manufacturer: Generic
usb 1-4.4: SerialNumber: 058F63626420
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1    739 MB/s
raid6: int32x2    750 MB/s
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
raid6: int32x4    720 MB/s
raid6: int32x8    520 MB/s
raid6: mmxx1     1643 MB/s
raid6: mmxx2     3045 MB/s
raid6: sse1x1    1641 MB/s
raid6: sse1x2    2692 MB/s
raid6: sse2x1    2715 MB/s
raid6: sse2x2    3760 MB/s
raid6: using algorithm sse2x2 (3760 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 424k freed
usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3F11
usbcore: registered new interface driver usblp
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
scsi 6:0:0:0: Direct-Access     Seagate  FreeAgentDesktop 100D PQ: 0 ANSI: 4
sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 1c 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 1c 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
usb-storage: device scan complete
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
forcedeth 0000:00:0a.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
ACPI: Power Button (FF) [PWRF]
processor ACPI0007:00: registered as cooling_device0
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
processor ACPI0007:01: registered as cooling_device1
Linux agpgart interface v0.103
ACPI: Power Button (CM) [PWRB]
scsi 7:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
sd 7:0:0:0: [sdd] Attached SCSI removable disk
sd 7:0:0:0: Attached scsi generic sg3 type 0
scsi 7:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
sd 7:0:0:1: [sde] Attached SCSI removable disk
sd 7:0:0:1: Attached scsi generic sg4 type 0
scsi 7:0:0:2: Direct-Access     Generic- SM/. Picture    1.02 PQ: 0 ANSI: 0
sd 7:0:0:2: [sdf] Attached SCSI removable disk
sd 7:0:0:2: Attached scsi generic sg5 type 0
scsi 7:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0
sd 7:0:0:3: [sdg] Attached SCSI removable disk
sd 7:0:0:3: Attached scsi generic sg6 type 0
usb-storage: device scan complete
nvidia: module license 'NVIDIA' taints kernel.
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
ppdev: user-space parallel port driver
fan PNP0C0B:00: registered as cooling_device2
ACPI: Fan [FAN] (on)
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:18:f3:7e:50:e9
forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:05:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  180.17  Sun Dec 14 20:25:46 PST 2008
Error: Driver 'isp1760' is already registered, aborting...
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
Intel ICH 0000:00:04.0: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 54709 usecs
intel8x0: clocking to 46894
Adding 1951888k swap on /dev/sda4.  Priority:-1 extents:1 across:1951888k
fuse init (API version 7.9)
EXT3 FS on sda2, internal journal
lp0: using parport0 (interrupt-driven).
lp0: console ready
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 5:0:0:0: [sdb] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
        00 50 03 25
sd 5:0:0:0: [sdb] ASC=0x11 ASCQ=0x4
end_request: I/O error, dev sdb, sector 5243685
Buffer I/O error on device sdb1, logical block 2621811
Buffer I/O error on device sdb1, logical block 2621812
Buffer I/O error on device sdb1, logical block 2621813
Buffer I/O error on device sdb1, logical block 2621814
Buffer I/O error on device sdb1, logical block 2621815
Buffer I/O error on device sdb1, logical block 2621816
Buffer I/O error on device sdb1, logical block 2621817
Buffer I/O error on device sdb1, logical block 2621818
Buffer I/O error on device sdb1, logical block 2621819
Buffer I/O error on device sdb1, logical block 2621820
ata4: EH complete
sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 5:0:0:0: [sdb] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
        00 50 03 25
sd 5:0:0:0: [sdb] ASC=0x11 ASCQ=0x4
end_request: I/O error, dev sdb, sector 5243685
__ratelimit: 107 callbacks suppressed
Buffer I/O error on device sdb1, logical block 2621811
ata4: EH complete
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
sd 5:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 5:0:0:0: [sdb] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
        00 50 03 25
sd 5:0:0:0: [sdb] ASC=0x11 ASCQ=0x4
end_request: I/O error, dev sdb, sector 5243685
Buffer I/O error on device sdb1, logical block 2621811
ata4: EH complete
sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0x18947 offMax=0x18947
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.1.4 (interface 0x000a0009).
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
xscreensaver-ge[3594]: segfault at c ip 08098c20 sp bf822990 error 4 in perl5.10.0[8048000+123000]
usb 2-3: USB disconnect, address 3
usblp0: removed
xscreensaver-ge[8404]: segfault at c ip 08098c20 sp bfd11760 error 4 in perl5.10.0[8048000+123000]
xscreensaver-ge[18673]: segfault at c ip 08098c20 sp bff98df0 error 4 in perl5.10.0[8048000+123000]
xscreensaver-ge[24093]: segfault at c ip 08098c20 sp bfc25670 error 4 in perl5.10.0[8048000+123000]
Clocksource tsc unstable (delta = -62500484 ns)
xscreensaver-ge[6796]: segfault at c ip 08098c20 sp bff519a0 error 4 in perl5.10.0[8048000+123000]
xscreensaver-ge[30523]: segfault at c ip 08098c20 sp bfc77ec0 error 4 in perl5.10.0[8048000+123000]
xscreensaver-ge[21862]: segfault at c ip 08098c20 sp bfe454e0 error 4 in perl5.10.0[8048000+123000]
xscreensaver-ge[6809]: segfault at c ip 08098c20 sp bfc83300 error 4 in perl5.10.0[8048000+123000]

del quale, la parte che riguarda il disco esterno e che mi preoccupa e' questa:
Codice: Seleziona tutto
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x4
ata4.00: cmd c8/00:00:0f:03:50/00:00:00:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133

ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133

ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: BMDMA stat 0x5
ata4.00: cmd c8/00:02:25:03:50/00:00:00:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:25:03:50/00:00:00:00:00/00 Emask 0x9 (media error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { UNC }
ata4.00: configured for UDMA/133

anche se, ad essere sinceri, non sono del tutto sicuro che i problemi siano del disco esterno,che e' sdc, o del secondo disco interno, che ha meno di 6 mesi ed e' sdb...perche' nel dmesg leggo anche questo:
Codice: Seleziona tutto
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 22
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133
ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133

che mi fa pensare che ata4.00 si riferisca al disco interno...e questo:
Codice: Seleziona tutto
sd 5:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 5:0:0:0: [sdb] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
        00 50 03 25
sd 5:0:0:0: [sdb] ASC=0x11 ASCQ=0x4
end_request: I/O error, dev sdb, sector 5243685
Buffer I/O error on device sdb1, logical block 2621811
Buffer I/O error on device sdb1, logical block 2621812
Buffer I/O error on device sdb1, logical block 2621813
Buffer I/O error on device sdb1, logical block 2621814
Buffer I/O error on device sdb1, logical block 2621815
Buffer I/O error on device sdb1, logical block 2621816
Buffer I/O error on device sdb1, logical block 2621817
Buffer I/O error on device sdb1, logical block 2621818
Buffer I/O error on device sdb1, logical block 2621819
Buffer I/O error on device sdb1, logical block 2621820
ata4: EH complete
sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)

sd 5:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 5:0:0:0: [sdb] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
        00 50 03 25
sd 5:0:0:0: [sdb] ASC=0x11 ASCQ=0x4
end_request: I/O error, dev sdb, sector 5243685
__ratelimit: 107 callbacks suppressed
Buffer I/O error on device sdb1, logical block 2621811

sd 5:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 5:0:0:0: [sdb] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
        00 50 03 25
sd 5:0:0:0: [sdb] ASC=0x11 ASCQ=0x4
end_request: I/O error, dev sdb, sector 5243685
Buffer I/O error on device sdb1, logical block 2621811

pero' mi sembra sinceramente assurdo che il secondo disco sata interno possa avere dei problemi, perche' ha veramente meno di 6 mesi ed e' praticamente vuoto e quasi mai utilizzato.
Avrebbe piu' senso invece che stesse iniziando a predere colpi il disco di backup, il che sarebbe anche molto piu' preoccupante, perche' ha un ruolo fondamentale e lo dovrei rimpiazzare il prima possibile.

EDIT:
Questo e' il mio mount, tanto per chiarezza:
Codice: Seleziona tutto
/dev/root on / type ext3 (rw,errors=continue,data=ordered)
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/sda3 on /home type ext3 (rw)
/dev/sdb1 on /disco02 type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
/dev/sdc1 on /external01 type ext3 (rw,noexec,nosuid,nodev)

e questo e' fstab:
Codice: Seleziona tutto
/dev/root on / type ext3 (rw,errors=continue,data=ordered)
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/sda3 on /home type ext3 (rw)
/dev/sdb1 on /disco02 type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
/dev/sdc1 on /external01 type ext3 (rw,noexec,nosuid,nodev)


Insomma, come al solito sono confuso ed ignorante...mi sapete chiarire un po' le idee?

Ciao a tutti e grazie in anticipo, come sempre!
Avatar utente
sberla54
Master
Master
 
Messaggi: 1500
Iscritto il: mer giu 23, 2004 23:00
Località: Bologna
Slackware: 13.0
Desktop: Gnome (o Fluxbox)
Distribuzione: Ubuntu

Re: Strani messaggi errore hard disk esterno: drdy err

Messaggioda slux » mar ago 11, 2009 10:40

Se sdb è il tuo disco interno , mi dispiace ,ma c'è poco da dire(I maxtor colpiscono ancora!).Eventualmente scollega il disco usb e ricontrolla i log.Se continui a vedere gli stessi problemi....
Fai il prima possibile un backup di tutto e poi controlla accuratamente con le smarttools.
Buona fortuna :)
Avatar utente
slux
Linux 2.6
Linux 2.6
 
Messaggi: 782
Iscritto il: dom mar 20, 2005 0:00
Località: Prato
Nome Cognome: Andrea Amerini
Slackware: 14.1 x86
Kernel: 3.12.0-smp
Desktop: xfce 4.10

Re: Strani messaggi errore hard disk esterno: drdy err

Messaggioda sberla54 » mar ago 11, 2009 13:27

Dunque, ieri sera infatti, sul canale IRC di Slacky su Syrol, ho parlato un po' con tribeca e roughnecks e mi hanno detto anche loro che pensano che gli errori vengano dal secondo disco interno e non dall'esterno usb...e mi hanno anche detto che pensano che abbia gia' un piede nella fossa, nonostante abbia davvero meno di 8 mesi, dato che l'ho preso a Natale scorso.

comunque, indagando, questo e' l'output degli smarttools su sdb:
Codice: Seleziona tutto
smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     MAXTOR STM3500320AS
Serial Number:    6QM0M6X1
Firmware Version: MX15
User Capacity:    500,107,862,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Tue Aug 11 14:19:24 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:        ( 642) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     ( 117) minutes.
Conveyance self-test routine
recommended polling time:     (   2) minutes.
SCT capabilities:           (0x103b)   SCT Status supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   096   082   006    Pre-fail  Always       -       82023132
  3 Spin_Up_Time            0x0003   094   094   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       22
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       265
  7 Seek_Error_Rate         0x000f   051   050   030    Pre-fail  Always       -       249115783036
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       5022
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       22
184 Unknown_Attribute       0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       2801
188 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   064   060   045    Old_age   Always       -       36 (Lifetime Min/Max 28/37)
194 Temperature_Celsius     0x0022   036   040   000    Old_age   Always       -       36 (0 22 0 0)
195 Hardware_ECC_Recovered  0x001a   033   029   000    Old_age   Always       -       82023132
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       49
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       49
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 2801 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2801 occurred at disk power-on lifetime: 4935 hours (205 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 25 03 50 00  Error: UNC at LBA = 0x00500325 = 5243685

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 02 25 03 50 e0 00      00:01:55.254  READ DMA
  27 00 00 00 00 00 e0 00      00:01:55.251  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02      00:01:55.243  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02      00:01:55.235  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:01:55.227  READ NATIVE MAX ADDRESS EXT

Error 2800 occurred at disk power-on lifetime: 4935 hours (205 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 25 03 50 00  Error: UNC at LBA = 0x00500325 = 5243685

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 02 25 03 50 e0 00      00:01:52.302  READ DMA
  27 00 00 00 00 00 e0 00      00:01:52.299  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02      00:01:52.291  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02      00:01:52.287  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:01:52.279  READ NATIVE MAX ADDRESS EXT

Error 2799 occurred at disk power-on lifetime: 4935 hours (205 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 25 03 50 00  Error: UNC at LBA = 0x00500325 = 5243685

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 02 25 03 50 e0 00      00:01:49.362  READ DMA
  27 00 00 00 00 00 e0 00      00:01:49.359  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02      00:01:49.351  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02      00:01:49.346  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:01:49.339  READ NATIVE MAX ADDRESS EXT

Error 2798 occurred at disk power-on lifetime: 4935 hours (205 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 25 03 50 00  Error: UNC at LBA = 0x00500325 = 5243685

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 02 25 03 50 e0 00      00:01:46.430  READ DMA
  27 00 00 00 00 00 e0 00      00:01:46.427  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02      00:01:46.419  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02      00:01:46.415  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:01:46.407  READ NATIVE MAX ADDRESS EXT

Error 2797 occurred at disk power-on lifetime: 4935 hours (205 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 25 03 50 00  Error: UNC at LBA = 0x00500325 = 5243685

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 02 25 03 50 e0 00      00:01:43.458  READ DMA
  27 00 00 00 00 00 e0 00      00:01:43.455  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 02      00:01:43.447  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 02      00:01:43.441  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:01:43.427  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Da una parte dice:
SMART overall-health self-assessment test result: PASSED

e dall'altra invece si contraddice dicendo:
SMART Error Log Version: 1
ATA Error Count: 2801 (device log contains only the most recent five errors)

iniziando ad elencare una serie di errori non ben comprensibili...

Inoltre ho notato che il disco 2 sembra funzionare come SATA 1, anche se e' un SATA 2:
Codice: Seleziona tutto
bash-3.1# hdparm -I /dev/sdb |grep SATA     
           *    SATA-I signaling speed (1.5Gb/s)

bash-3.1# hdparm -I /dev/sda |grep SATA     
        Transport:          Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
           *    SATA-I signaling speed (1.5Gb/s)
           *    SATA-II signaling speed (3.0Gb/s)

devo controllare se e' una questione di jumper dell'hard disk o se magari si e' rallentato proprio per colpa di questi problemi...

Bel casino pero'.
Continua a sembrarmi assurdo che un Maxtor che e' rimasto acceso ma praticamente inutilizzato per neanche 7 mesi si stia gia' rompendo...non ho mai avuto problemi con i dischi Maxtor e Seagate...

Inoltre anche le performance sembrano normali:
bash-3.1# hdparm -t /dev/sdb
/dev/sdb:
Timing buffered disk reads: 280 MB in 3.01 seconds = 93.03 MB/sec

Bho...voi dite proprio che e' da buttare?

Adesso provero' anche il disco di diagnostica della Maxtor...

Gia' che ci sono, se il disco risultasse definitivamente da buttare, posso farmene spedire un altro no? Dovrebbe essere in garanzia...non sono ancora passati i 2 anni classici...
Come funziona la cosa? Non l'ho mai fatto prima...

Grazie mille!
Avatar utente
sberla54
Master
Master
 
Messaggi: 1500
Iscritto il: mer giu 23, 2004 23:00
Località: Bologna
Slackware: 13.0
Desktop: Gnome (o Fluxbox)
Distribuzione: Ubuntu

Re: Strani messaggi errore hard disk esterno: drdy err

Messaggioda luka64 » mar ago 11, 2009 15:19

guarda qui: questo è un disco "buono", poi puoi fare i confronti
Codice: Seleziona tutto
Command executed: bash -c "smartctl -s on /dev/sda ; smartctl -a /dev/sda"
Information returned:
   smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen
   Home page is http://smartmontools.sourceforge.net/
   
   === START OF ENABLE/DISABLE COMMANDS SECTION ===
   SMART Enabled.
   
   smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen
   Home page is http://smartmontools.sourceforge.net/
   
   === START OF INFORMATION SECTION ===
   Device Model:     MAXTOR STM380815AS
   Serial Number:    5RA7T9JZ
   Firmware Version: 4.AAB
   User Capacity:    80,026,361,856 bytes
   Device is:        Not in smartctl database [for details use: -P showall]
   ATA Version is:   7
   ATA Standard is:  Exact ATA specification draft version not indicated
   Local Time is:    Tue Aug 11 16:09:56 2009 EDT
   SMART support is: Available - device has SMART capability.
   SMART support is: Enabled
   
   === START OF READ SMART DATA SECTION ===
   SMART overall-health self-assessment test result: PASSED
   
   General SMART Values:
   Offline data collection status:  (0x82)   Offline data collection activity
                  was completed without error.
                  Auto Offline Data Collection: Enabled.
   Self-test execution status:      (   0)   The previous self-test routine completed
                  without error or no self-test has ever
                  been run.
   Total time to complete Offline
   data collection:        ( 430) seconds.
   Offline data collection
   capabilities:           (0x5b) SMART execute Offline immediate.
                  Auto Offline data collection on/off support.
                  Suspend Offline collection upon new
                  command.
                  Offline surface scan supported.
                  Self-test supported.
                  No Conveyance Self-test supported.
                  Selective Self-test supported.
   SMART capabilities:            (0x0003)   Saves SMART data before entering
                  power-saving mode.
                  Supports SMART auto save timer.
   Error logging capability:        (0x01)   Error logging supported.
                  General Purpose Logging supported.
   Short self-test routine
   recommended polling time:     (   1) minutes.
   Extended self-test routine
   recommended polling time:     (  27) minutes.
   
   SMART Attributes Data Structure revision number: 10
   Vendor Specific SMART Attributes with Thresholds:
   ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
     1 Raw_Read_Error_Rate     0x000f   100   253   006    Pre-fail  Always       -       0
     3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
     4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       75
     5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
     7 Seek_Error_Rate         0x000f   066   060   030    Pre-fail  Always       -       4565239
     9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       124
    10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
    12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       75
   187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
   189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
   190 Airflow_Temperature_Cel 0x0022   056   054   045    Old_age   Always       -       44 (Lifetime Min/Max 29/44)
   194 Temperature_Celsius     0x0022   044   046   000    Old_age   Always       -       44 (0 29 0 0)
   195 Hardware_ECC_Recovered  0x001a   079   064   000    Old_age   Always       -       1253
   197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       1
   198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       1
   199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
   200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
   202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0
   
   SMART Error Log Version: 1
   No Errors Logged
   
   SMART Self-test log structure revision number 1
   
   SMART Selective self-test log data structure revision number 1
    SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
       1        0        0  Not_testing
       2        0        0  Not_testing
       3        0        0  Not_testing
       4        0        0  Not_testing
       5        0        0  Not_testing
   Selective self-test flags (0x0):
     After scanning selected spans, do NOT read-scan remainder of disk.
   If Selective self-test is pending on power-up, resume after 0 minute delay.

Command executed: bash -c "hdparm -I /dev/sda"
Information returned:
   /dev/sda:
   
   ATA device, with non-removable media
      Model Number:       MAXTOR STM380815AS                     
      Serial Number:      5RA7T9JZ
      Firmware Revision:  4.AAB   
   Standards:
      Supported: 7 6 5 4
      Likely used: 7
   Configuration:
      Logical      max   current
      cylinders   16383   16383
      heads      16   16
      sectors/track   63   63
      --
      CHS current addressable sectors:   16514064
      LBA    user addressable sectors:  156301488
      LBA48  user addressable sectors:  156301488
      Logical  Sector size:                   512 bytes
      Physical Sector size:                   512 bytes
      device size with M = 1024*1024:       76319 MBytes
      device size with M = 1000*1000:       80026 MBytes (80 GB)
      cache/buffer size  = 8192 KBytes
   Capabilities:
      LBA, IORDY(can be disabled)
      Queue depth: 32
      Standby timer values: spec'd by Standard, no device specific minimum
      R/W multiple sector transfer: Max = 16   Current = 1
      Recommended acoustic management value: 208, current value: 0
      DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
           Cycle time: min=120ns recommended=120ns
      PIO: pio0 pio1 pio2 pio3 pio4
           Cycle time: no flow control=120ns  IORDY flow control=120ns
   Commands/features:
      Enabled   Supported:
         *   SMART feature set
             Security Mode feature set
         *   Power Management feature set
         *   Write cache
         *   Look-ahead
         *   Host Protected Area feature set
         *   WRITE_BUFFER command
         *   READ_BUFFER command
         *   DOWNLOAD_MICROCODE
             SET_MAX security extension
         *   48-bit Address feature set
         *   Device Configuration Overlay feature set
         *   Mandatory FLUSH_CACHE
         *   FLUSH_CACHE_EXT
         *   SMART error logging
         *   SMART self-test
         *   General Purpose Logging feature set
         *   Gen1 signaling speed (1.5Gb/s)
         *   Gen2 signaling speed (3.0Gb/s)
         *   Native Command Queueing (NCQ)
         *   Phy event counters
             Device-initiated interface power management
         *   Software settings preservation
   Security:
      Master password revision code = 65534
         supported
      not   enabled
      not   locked
         frozen
      not   expired: security count
      not   supported: enhanced erase
   Checksum: correct
Avatar utente
luka64
Linux 2.0
Linux 2.0
 
Messaggi: 175
Iscritto il: ven mag 22, 2009 9:47
Slackware: 12.2,9e
Kernel: 2.6.28.10
Desktop: xfce
Distribuzione: zw6.0

Re: Strani messaggi errore hard disk esterno: drdy err

Messaggioda sberla54 » gio ago 27, 2009 16:32

Bhe Luka, non e' molto diverso dal mio...
Hai anche tu qualche valore in "Pre-Fail" in "Vendor Specific SMART Attributes with Thresholds" , pero' tu hai "SMART Error Log Version: 1 / No Errors Logged"
mentre io ho:
Codice: Seleziona tutto
SMART Error Log Version: 1
ATA Error Count: 2965 (device log contains only the most recent five errors)


comunque, vi aggiorno su quel che ho fatto: ho usato il tool della Seagate, i SeaTools For Dos 213b e mi ha dato questi risultati:
- ho fatto lo Short Test ed e' subito fallito
- ho avviato il Long Test e mi ha trovato 49 errori, praticamente tutti nella fase del test
- alla fine mi ha chiesto se li volevo riparare e glieli ho fatti riparare
- il Long Test mi ha detto che e' stato passato a seguito delle riparazioni
- ho rifatto lo Short Test ed e' stato passato senza problemi

Riavviando il computer non ho piu' avuto quegli errori al login ed il check di sdb e' andato a buon fine.

Questo e' l'attuale output di dmesg:
Codice: Seleziona tutto
ion
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
PERCPU: Allocating 39452 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519793
Kernel command line: BOOT_IMAGE=Linux ro root=802 vt.default_utf8=0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2010.263 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2067708k/2096000k available (6388k kernel code, 26976k reserved, 2148k data, 424k init, 1178496k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe19000 - 0xfffff000   (1944 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0963000 - 0xc09cd000   ( 424 kB)
      .data : 0xc073d137 - 0xc0956278   (2148 kB)
      .text : 0xc0100000 - 0xc073d137   (6388 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.52 BogoMIPS (lpj=8041052)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... failed.
...trying to set up timer as Virtual Wire IRQ...
..... failed.
...trying to set up timer as ExtINT IRQ...
..... works.
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4020.91 BogoMIPS (lpj=8041834)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Brought up 2 CPUs
Total of 2 processors activated (8041.44 BogoMIPS).
net_namespace: 776 bytes
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  6118.000 MB/sec
xor: using function: pIII_sse (6118.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
HPET not enabled in BIOS. You might try hpet=force boot option
PCI: 0000:00:01.1 reg 10 io port: [fc00, fc1f]
PCI: 0000:00:01.1 reg 20 io port: [4c00, 4c3f]
PCI: 0000:00:01.1 reg 24 io port: [4c40, 4c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [feb00000, feb000ff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:04.0 reg 10 io port: [f000, f0ff]
PCI: 0000:00:04.0 reg 14 io port: [ec00, ecff]
PCI: 0000:00:04.0 reg 18 32bit mmio: [fe02d000, fe02dfff]
pci 0000:00:04.0: supports D1
pci 0000:00:04.0: supports D2
PCI: 0000:00:06.0 reg 20 io port: [e800, e80f]
PCI: 0000:00:07.0 reg 10 io port: [9f0, 9f7]
PCI: 0000:00:07.0 reg 14 io port: [bf0, bf3]
PCI: 0000:00:07.0 reg 18 io port: [970, 977]
PCI: 0000:00:07.0 reg 1c io port: [b70, b73]
PCI: 0000:00:07.0 reg 20 io port: [d400, d40f]
PCI: 0000:00:07.0 reg 24 32bit mmio: [fe02c000, fe02cfff]
PCI: 0000:00:08.0 reg 10 io port: [9e0, 9e7]
PCI: 0000:00:08.0 reg 14 io port: [be0, be3]
PCI: 0000:00:08.0 reg 18 io port: [960, 967]
PCI: 0000:00:08.0 reg 1c io port: [b60, b63]
PCI: 0000:00:08.0 reg 20 io port: [c000, c00f]
PCI: 0000:00:08.0 reg 24 32bit mmio: [fe02b000, fe02bfff]
PCI: 0000:00:0a.0 reg 10 32bit mmio: [fe02a000, fe02afff]
PCI: 0000:00:0a.0 reg 14 io port: [bc00, bc07]
pci 0000:00:0a.0: supports D1
pci 0000:00:0a.0: supports D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:00:09.0: transparent bridge
PCI: 0000:05:00.0 reg 10 32bit mmio: [fb000000, fbffffff]
PCI: 0000:05:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
PCI: 0000:05:00.0 reg 1c 64bit mmio: [fc000000, fcffffff]
PCI: 0000:05:00.0 reg 24 io port: [ac00, ac7f]
PCI: 0000:05:00.0 reg 30 32bit mmio: [fdfe0000, fdffffff]
PCI: bridge 0000:00:0e.0 io port: [a000, afff]
PCI: bridge 0000:00:0e.0 32bit mmio: [fb000000, fdffffff]
PCI: bridge 0000:00:0e.0 64bit mmio pref: [d0000000, dfffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
tracer: 772 pages allocated for 65536 entries of 48 bytes
   actual entries 65620
ACPI: RTC can wake from S4
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0c: iomem range 0xcde00-0xcffff has been reserved
system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved
system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved
system 00:0c: iomem range 0xfff90000-0xfffbffff could not be reserved
system 00:0c: iomem range 0xfffed000-0xfffeffff could not be reserved
pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
pci 0000:00:09.0:   IO window: disabled
pci 0000:00:09.0:   MEM window: disabled
pci 0000:00:09.0:   PREFETCH window: disabled
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0b.0:   IO window: disabled
pci 0000:00:0b.0:   MEM window: disabled
pci 0000:00:0b.0:   PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0c.0:   IO window: disabled
pci 0000:00:0c.0:   MEM window: disabled
pci 0000:00:0c.0:   PREFETCH window: disabled
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0d.0:   IO window: disabled
pci 0000:00:0d.0:   MEM window: disabled
pci 0000:00:0d.0:   PREFETCH window: disabled
pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:0e.0:   IO window: 0xa000-0xafff
pci 0000:00:0e.0:   MEM window: 0xfb000000-0xfdffffff
pci 0000:00:0e.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [0, 0]
bus: 01 index 2 mmio: [0, 0]
bus: 01 index 3 io port: [0, ffff]
bus: 01 index 4 mmio: [0, ffffffff]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [0, 0]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [0, 0]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 mmio: [0, 0]
bus: 04 index 1 mmio: [0, 0]
bus: 04 index 2 mmio: [0, 0]
bus: 04 index 3 mmio: [0, 0]
bus: 05 index 0 io port: [a000, afff]
bus: 05 index 1 mmio: [fb000000, fdffffff]
bus: 05 index 2 mmio: [d0000000, dfffffff]
bus: 05 index 3 mmio: [0, 0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Nov 20 2008 22:30:39) installed
msgmni has been set to 1738
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:0b.0: Linking AER extended capability
pci 0000:00:0c.0: Linking AER extended capability
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:05:00.0: Boot video device
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: found MSI capability
pci_express 0000:00:0b.0:pcie00: allocate port service
pci_express 0000:00:0b.0:pcie03: allocate port service
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: found MSI capability
pci_express 0000:00:0c.0:pcie00: allocate port service
pci_express 0000:00:0c.0:pcie03: allocate port service
pcieport-driver 0000:00:0d.0: setting latency timer to 64
pcieport-driver 0000:00:0d.0: found MSI capability
pci_express 0000:00:0d.0:pcie00: allocate port service
pci_express 0000:00:0d.0:pcie03: allocate port service
pcieport-driver 0000:00:0e.0: setting latency timer to 64
pcieport-driver 0000:00:0e.0: found MSI capability
pci_express 0000:00:0e.0:pcie00: allocate port service
pci_express 0000:00:0e.0:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 1536k, total 262144k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at c000:c2e0
vesafb: pmi: set display start = c00cc316, set palette = c00cc380
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:06.0: UDMA133 controller
amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xf2)
amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xe800-0xe807
    ide1: BM-DMA at 0xe808-0xe80f
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive
hdb: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI 52X DVD-ROM drive, 256kB Cache
ide-floppy driver 1.00
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Copyright(c) 2004-2008 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
   with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:07.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 23
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.0: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 22
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 22
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD5000AAKS-22A7B0, 01.03B01, max UDMA/133
ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133
ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-2 01.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 4:0:0:0: [sda] Attached SCSI disk
scsi 5:0:0:0: Direct-Access     ATA      MAXTOR STM350032 MX15 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.7-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.7-smp ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
isp1760 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
memory length for this resource is less than required
isp1760: probe of 0000:00:0a.0 failed with error -12
Initializing USB Mass Storage driver...
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=0bc2, idProduct=3000
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: FreeAgentDesktop
usb 1-1: Manufacturer: Seagate
usb 1-1: SerialNumber:             6QG0GTG6
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: New USB device found, idVendor=046d, idProduct=c040
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB-PS/2 Optical Mouse
usb 2-2: Manufacturer: Logitech
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1    739 MB/s
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
raid6: int32x2    750 MB/s
raid6: int32x4    720 MB/s
raid6: int32x8    520 MB/s
raid6: mmxx1     1643 MB/s
raid6: mmxx2     3045 MB/s
raid6: sse1x1    1641 MB/s
raid6: sse1x2    2682 MB/s
raid6: sse2x1    2709 MB/s
raid6: sse2x2    3743 MB/s
raid6: using algorithm sse2x2 (3743 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 424k freed
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ACPI: Power Button (CM) [PWRB]
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
forcedeth 0000:00:0a.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
Linux agpgart interface v0.103
processor ACPI0007:00: registered as cooling_device0
processor ACPI0007:01: registered as cooling_device1
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
nvidia: module license 'NVIDIA' taints kernel.
ppdev: user-space parallel port driver
fan PNP0C0B:00: registered as cooling_device2
ACPI: Fan [FAN] (on)
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:18:f3:7e:50:e9
forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
Intel ICH 0000:00:04.0: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 54684 usecs
intel8x0: clocking to 46872
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:05:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  180.17  Sun Dec 14 20:25:46 PST 2008
Error: Driver 'isp1760' is already registered, aborting...
Adding 1951888k swap on /dev/sda4.  Priority:-1 extents:1 across:1951888k
fuse init (API version 7.9)
EXT3 FS on sda2, internal journal
scsi 6:0:0:0: Direct-Access     Seagate  FreeAgentDesktop 100D PQ: 0 ANSI: 4
sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 1c 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 1c 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
lp0: using parport0 (interrupt-driven).
lp0: console ready
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0x415572 offMax=0x415572
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.1.4 (interface 0x000a0009).
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
usb 1-4: new high speed USB device using ehci_hcd and address 4
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-4: New USB device found, idVendor=05e3, idProduct=0608
usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: USB2.0 Hub
usb 1-4.4: new high speed USB device using ehci_hcd and address 5
usb 1-4.4: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb 1-4.4: New USB device found, idVendor=058f, idProduct=6362
usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.4: Product: Mass Storage Device
usb 1-4.4: Manufacturer: Generic
usb 1-4.4: SerialNumber: 058F63626420
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 7:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
sd 7:0:0:0: [sdd] Attached SCSI removable disk
sd 7:0:0:0: Attached scsi generic sg3 type 0
scsi 7:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
sd 7:0:0:1: [sde] Attached SCSI removable disk
sd 7:0:0:1: Attached scsi generic sg4 type 0
scsi 7:0:0:2: Direct-Access     Generic- SM/. Picture    1.02 PQ: 0 ANSI: 0
sd 7:0:0:2: [sdf] Attached SCSI removable disk
sd 7:0:0:2: Attached scsi generic sg5 type 0
scsi 7:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0
sd 7:0:0:3: [sdg] Attached SCSI removable disk
sd 7:0:0:3: Attached scsi generic sg6 type 0
usb-storage: device scan complete



Questo e' l'output completo degli Smart Tools, post test dei SeaTools e riparazione:
smartctl --all /dev/sdb
Codice: Seleziona tutto
smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     MAXTOR STM3500320AS
Serial Number:    6QM0M6X1
Firmware Version: MX15
User Capacity:    500,107,862,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Thu Aug 27 17:19:21 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:        ( 642) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     ( 117) minutes.
Conveyance self-test routine
recommended polling time:     (   2) minutes.
SCT capabilities:           (0x103b)   SCT Status supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   113   082   006    Pre-fail  Always       -       51930902
  3 Spin_Up_Time            0x0003   095   094   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       26
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       316
  7 Seek_Error_Rate         0x000f   051   050   030    Pre-fail  Always       -       292066114187
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       5394
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       25
184 Unknown_Attribute       0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       2953
188 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   062   060   045    Old_age   Always       -       38 (Lifetime Min/Max 27/40)
194 Temperature_Celsius     0x0022   038   040   000    Old_age   Always       -       38 (0 22 0 0)
195 Hardware_ECC_Recovered  0x001a   049   029   000    Old_age   Always       -       51930902
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 2965 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2965 occurred at disk power-on lifetime: 5391 hours (224 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b1 3d 68 00  Error: UNC at LBA = 0x00683db1 = 6831537

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 ff 00 fd 35 68 e0 00  12d+00:52:43.059  READ VERIFY SECTOR(S) EXT
  42 ff 00 fd 2d 68 e0 00  12d+00:52:42.992  READ VERIFY SECTOR(S) EXT
  42 ff 00 fd 25 68 e0 00  12d+00:52:42.943  READ VERIFY SECTOR(S) EXT
  42 ff 00 fd 1d 68 e0 00  12d+00:52:42.890  READ VERIFY SECTOR(S) EXT
  42 ff 00 fd 15 68 e0 00  12d+00:52:42.843  READ VERIFY SECTOR(S) EXT

Error 2964 occurred at disk power-on lifetime: 5391 hours (224 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 fc 0d 68 00  Error: UNC at LBA = 0x00680dfc = 6819324

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 ff 00 1f 07 68 e0 00  12d+00:52:39.301  READ VERIFY SECTOR(S) EXT
  42 ff 00 1f ff 67 e0 00  12d+00:52:39.254  READ VERIFY SECTOR(S) EXT
  42 ff 00 4c f8 67 e0 00  12d+00:52:36.955  READ VERIFY SECTOR(S) EXT
  42 ff 00 79 f1 67 e0 00  12d+00:52:34.682  READ VERIFY SECTOR(S) EXT
  42 ff 00 a6 ea 67 e0 00  12d+00:52:32.364  READ VERIFY SECTOR(S) EXT

Error 2963 occurred at disk power-on lifetime: 5391 hours (224 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 1e ff 67 00  Error: UNC at LBA = 0x0067ff1e = 6815518

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 ff 00 4c f8 67 e0 00  12d+00:52:36.955  READ VERIFY SECTOR(S) EXT
  42 ff 00 79 f1 67 e0 00  12d+00:52:34.682  READ VERIFY SECTOR(S) EXT
  42 ff 00 a6 ea 67 e0 00  12d+00:52:32.364  READ VERIFY SECTOR(S) EXT
  42 ff 00 d3 e3 67 e0 00  12d+00:52:24.478  READ VERIFY SECTOR(S) EXT
  42 ff 00 00 dd 67 e0 00  12d+00:52:22.171  READ VERIFY SECTOR(S) EXT

Error 2962 occurred at disk power-on lifetime: 5391 hours (224 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 4b f8 67 00  Error: UNC at LBA = 0x0067f84b = 6813771

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 ff 00 79 f1 67 e0 00  12d+00:52:34.682  READ VERIFY SECTOR(S) EXT
  42 ff 00 a6 ea 67 e0 00  12d+00:52:32.364  READ VERIFY SECTOR(S) EXT
  42 ff 00 d3 e3 67 e0 00  12d+00:52:24.478  READ VERIFY SECTOR(S) EXT
  42 ff 00 00 dd 67 e0 00  12d+00:52:22.171  READ VERIFY SECTOR(S) EXT
  42 ff 00 b4 d5 67 e0 00  12d+00:52:19.932  READ VERIFY SECTOR(S) EXT

Error 2961 occurred at disk power-on lifetime: 5391 hours (224 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 78 f1 67 00  Error: UNC at LBA = 0x0067f178 = 6812024

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 ff 00 a6 ea 67 e0 00  12d+00:52:32.364  READ VERIFY SECTOR(S) EXT
  42 ff 00 d3 e3 67 e0 00  12d+00:52:24.478  READ VERIFY SECTOR(S) EXT
  42 ff 00 00 dd 67 e0 00  12d+00:52:22.171  READ VERIFY SECTOR(S) EXT
  42 ff 00 b4 d5 67 e0 00  12d+00:52:19.932  READ VERIFY SECTOR(S) EXT
  42 ff 00 b4 cd 67 e0 00  12d+00:52:19.857  READ VERIFY SECTOR(S) EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      5393         -
# 2  Short offline       Completed: read failure       90%      5391         5243685
# 3  Short offline       Completed: read failure       90%      5391         5243685

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Il disco continua pero' ad andare a SATA 1 invece che SATA 2 e questo proprio non me lo spiego.

In compenso pero' funziona senza problemi....ci ho copiato un bel malloppone di dati senza nessun problema, cosi' come ho copiato dei dati dal disco2 al disco1....inoltre non mi sembra di sentire nessuno dei classici rumori che fanno gli hard disk quando stanno dando gli ultimi...

Non so che fare.
Voi che dite?
A me sembra funzionante...solo gli SmartTools mi dicono il contrario..
Avatar utente
sberla54
Master
Master
 
Messaggi: 1500
Iscritto il: mer giu 23, 2004 23:00
Località: Bologna
Slackware: 13.0
Desktop: Gnome (o Fluxbox)
Distribuzione: Ubuntu

Re: Strani messaggi errore hard disk esterno: drdy err

Messaggioda luka64 » gio ago 27, 2009 20:38

mah... a occhio non metterei su quell'hd roba importante, ma il dubbio rimane: chi ha ragione? La
Seagate o gli smartmontools? Basandomi sulla fama di questi dischi propenderei per i secondi... :-k
se puoi, potresti mettere noatime in fstab, per risparmiare usura...
Avatar utente
luka64
Linux 2.0
Linux 2.0
 
Messaggi: 175
Iscritto il: ven mag 22, 2009 9:47
Slackware: 12.2,9e
Kernel: 2.6.28.10
Desktop: xfce
Distribuzione: zw6.0

Re: Strani messaggi errore hard disk esterno: drdy err

Messaggioda sberla54 » ven ago 28, 2009 14:03

Ma, scusa, i Seagate hanno una cattiva fama?
Io mi sono sempre fidato di Maxtor e Seagate ed in tanti anni mi si e' rotto un solo hard disk, tra l'altro scollegato dal pc, quindi probabilmente perche' qualcuno me l'ha fatto cadere in terra o roba simile....

Questo qui ha 8 mesi...mi pare assurdo che si si gia' rotto....

La cosa importante, inoltre, e' che essendo cosi' giovane dovrebbe essere ancora in garanzia e quindi se il giudizio finale e' che si sta gia' spaccando, vorrei chiedere la sostituzione alla Seagate!

Tornano alla questione "tool Seagate Vs SmartmonTools", c'e' anche un terzo attore in gioco, che concorda con il tool Seagate: fsck di Linux :)
Infatti, adesso all'avvio non mi vengono piu' mostrati errori riguardo al file system e sembra tutto a posto...

Ci si potra' fidare?

Che cavolo significa che c'erano 49 errori nel disco ed il tool Seagate li ha corretti? Magari erano semplicemente una manciata di settori difettosi che sono stati esclusi dall'utilizzo...

Inoltre, cosa significa quell'errore che si ripete che viene mostrato negli Smartmon Tools? Bisognerebbe capirlo (ed io non lo capisco :( ) perche' magari non e' niente d'importante...
Avatar utente
sberla54
Master
Master
 
Messaggi: 1500
Iscritto il: mer giu 23, 2004 23:00
Località: Bologna
Slackware: 13.0
Desktop: Gnome (o Fluxbox)
Distribuzione: Ubuntu

Re: Strani messaggi errore hard disk esterno: drdy err

Messaggioda luka64 » ven ago 28, 2009 20:10

Please note: the fact that an Attribute is of type 'Pre-fail' does not mean that your disk is about to fail! It only has this meaning if the Attribute's current Normalized value is less than or equal to the threshold value. Se ti può essere utile:
http://smartmontools.sourceforge.net/ma ... ctl.8.html
Avatar utente
luka64
Linux 2.0
Linux 2.0
 
Messaggi: 175
Iscritto il: ven mag 22, 2009 9:47
Slackware: 12.2,9e
Kernel: 2.6.28.10
Desktop: xfce
Distribuzione: zw6.0

Re: Strani messaggi errore hard disk esterno: drdy err

Messaggioda sberla54 » gio nov 19, 2009 21:47

Scusatemi se riuppo il topic.

Ho continuato ad usare l'hard disk per tutti questi mesi e, pur facendone un uso sporadico, mi sembrava che andasse bene e che eventuali problemi fossero stati risolti.

Tanto per dire, il fsck non ha mai dato piu' un errore o un warning.

Ora pero' sto ricominciando a pensare che sia rovinato, almeno in parte, perche' c'ho copiato sopra un paio di grossi files e nel ricopiarli sul primo disco mi sono risultati corrotti.
Altre volte invece mi dava errori di lettura ingiustificabili, del tipo "impossibile accere alla risorsa taldeitali".

Che dite, e' proprio da buttare?

Io purtroppo non trovo lo scontrino o la fattura e non riesco neppure a risalire a quale fosse il venditore ebay (un negozio) che me lo aveva venduto...non trovo traccia della transazione ne' sulla mail ne' nel conto PayPal...

A questo punto credo che siano 50 euro buttati e che mi debba mette nell'ordine delle idee di comprarne uno nuovo :(
Avatar utente
sberla54
Master
Master
 
Messaggi: 1500
Iscritto il: mer giu 23, 2004 23:00
Località: Bologna
Slackware: 13.0
Desktop: Gnome (o Fluxbox)
Distribuzione: Ubuntu

Re: Strani messaggi errore hard disk esterno: drdy err

Messaggioda Luci0 » gio nov 19, 2009 22:43

Hai un hard disk con il firmware bacato ... MX15 fai un aggiornamento appena possibile.
Io ci sono rimasto fregato e ho dovuto rimediare così
http://forum.lug-acros.org/viewtopic.php?t=4822

Se il disco viene riconosciuto correttamente puoi effettuare un aggiornamento del firmware reperibile presso il sito della Maxtor Seagate ... forse hai ancora qualche possibilità di rimetterlo in sesto.
Resta comunque un pesante dubbio sull' affidabilità del disco
Avatar utente
Luci0
Staff
Staff
 
Messaggi: 3591
Iscritto il: dom giu 26, 2005 23:00
Località: Forte dei Marmi
Nome Cognome: Gabriele Santanché
Slackware: 12.2 14.0
Kernel: 2.6.27.46- gen 3.2.29
Desktop: KDE 3.5.10 Xfce

Re: Strani messaggi errore hard disk esterno: drdy err

Messaggioda sberla54 » gio dic 10, 2009 17:36

Appena ho installato Ubuntu mi ha detto, tramite gli smarttools ed il suo relativo monitor di sistema, che il disco era danneggiato ed andava immediatamente sostituito :(

Ne ho comprato un altro, stavolta Western Digital, marca che non mi ha mai dato problemi (finora...tocchiamo ferro).

La cosa buona e' che ho ritrovato lo scontrino d'acquisto dell'hard disk, cosi' provvedero' comunque a chiedere la sostituzione :)

Grazie a tutti ragazzi, come sempre!!!
Avatar utente
sberla54
Master
Master
 
Messaggi: 1500
Iscritto il: mer giu 23, 2004 23:00
Località: Bologna
Slackware: 13.0
Desktop: Gnome (o Fluxbox)
Distribuzione: Ubuntu


Torna a Hardware

Chi c’è in linea

Visitano il forum: Nessuno e 3 ospiti