Repository 32bit  Forum
Repository 64bit  Wiki

Slackware 13.0 e malfunzionamenti xorg

Usate questo forum per richieste di aiuto e consigli sull'hardware montato nelle vostre macchine con GNU/Linux Slackware.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata e la versione del Kernel. Questi dati aiutano le persone che possono rispondere.
2) Citare il tipo di hardware coinvolto in modo dettagliato.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT. Non usare termini gergali come procio, mobo e simili per identificare i componenti hardware.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

Slackware 13.0 e malfunzionamenti xorg

Messaggioda Burroughs » mar set 15, 2009 16:48

Salve a tutti!
Tanto per proporre un argomento nuovo, vorrei segnalare gli strani problemi che sto avendo con la mia scheda grafica, una ATI Radeon Express X1200, posta a corredo (si fa per dire) di un notebook Packard Bell su cui ho installato una Slackware 13.0 nuova di pacca.
Con la 12.2 utilizzavo i driver closed e mi trovavo abbastanza bene, qui, invece, ho fatto fare tutto ad HAL.
Problema: di tanto in tanto, specie quando apro con Dolphin il contenuto di un'unità USB collegata (leggi iPod) o lavoro sulla mia macchina virtuale, lo schermo mi diventa scuro, con accese tonalità di rosso e di nero.
Chiudendo la sessione, tutto torna come prima ma il fenomeno si ripresenta abbastanza frequentemente.
Questo è il file /etc/X11/xorg.conf-vesa generato da HAL:
Codice: Seleziona tutto
root@mody:~# cat /etc/X11/xorg.conf-vesa
# File generated by xf86config.         

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#                                               
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense, 
# and/or sell copies of the Software, and to permit persons to whom the     
# Software is furnished to do so, subject to the following conditions:     
#                                                                           
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.                       
#                                                                           
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL 
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE   
# SOFTWARE.                                                                 
#                                                                           
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the   
# XFree86 Project.                                                         
#                                                                           

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.                                                           
# **********************************************************************

# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed   
# this out to me. :)                                                         

# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards     
# (although not every card will support every resolution).           

# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.                     
#                                                                         
# Enjoy! :)                                                               
# -- volkerdi@slackware.com                                               
#                                                                         

# **********************************************************************
# Module section -- this  section  is used to specify                   
# which dynamically loadable modules to load.                           
# **********************************************************************
#                                                                       
Section "Module"                                                       

# This loads the DBE extension module.

    Load        "dbe"   # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"                                         
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection                                                       

# This loads the font modules
    Load        "type1"     
    Load        "freetype"   
    #Load        "speedo"   

# This loads the GLX module
    Load       "glx"       

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set     
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.                                     

    RgbPath     "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath 
# command (or a combination of both methods)                             
#                                                                         
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).                           
#                                                                         

    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/OTF/" 
    FontPath   "/usr/share/fonts/TTF/" 
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/" 
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/75dpi/"         
    FontPath   "/usr/share/fonts/100dpi/"         
    FontPath   "/usr/share/fonts/cyrillic/"       

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.                                     

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.                                                 
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging 

#    Option     "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.                                                             

#    Option     "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.                     

#    Option     "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.         

#    Option     "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will   
# receive a protocol error.                                         

#    Option     "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option     "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.                                 

#    Option     "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option     "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

#    Option      "blank time"    "10"    # 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when   
# the driver supports it.                                             

#    Option      "standby time"  "20"
#    Option      "suspend time"  "30"
#    Option      "off time"      "60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.                                         

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices                                                         
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section                                   
# **********************************************************************

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "kbd"     
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),         
# uncomment the following line.                                       

#    Option     "Protocol"      "Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.                                                               

#    Option     "AutoRepeat"    "500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option     "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option     "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:                   
#                                                                   
#    Option     "XkbModel"      "pc102"                             
#    Option     "XkbModel"      "pc105"                             
#                                                                   
# If you have a Microsoft Natural keyboard, you can use:           
#                                                                   
#    Option     "XkbModel"      "microsoft"                         
#                                                                   
# If you have a US "windows" keyboard you will want:               
#                                                                   
#    Option     "XkbModel"      "pc104"                             
#                                                                   
# Then to change the language, change the Layout setting.           
# For example, a german layout can be obtained with:               
#                                                                   
#    Option     "XkbLayout"     "de"                               
#                                                                   
# or:                                                               
#                                                                   
#    Option     "XkbLayout"     "de"                               
#    Option     "XkbVariant"    "nodeadkeys"                       
#                                                                   
# If you'd like to switch the positions of your capslock and       
# control keys, use:                                               
#                                                                   
#    Option     "XkbOptions"    "ctrl:swapcaps"                     


# These are the default XKB settings for X.Org
#                                             
#    Option     "XkbRules"      "xorg"       
#    Option     "XkbModel"      "pc105"       
#    Option     "XkbLayout"     "us"         
#    Option     "XkbVariant"    ""           
#    Option     "XkbOptions"    ""           

EndSection


# **********************************************************************
# Core Pointer's InputDevice section                                   
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver      "mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:       

#    Option     "Protocol"      "Auto"

# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue                       
    Option "Protocol"    "PS/2"                                   

# The mouse device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.       

    Option "Device"      "/dev/mouse"
#   Option "Device"      "/dev/psaux"
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.                                             

#    Option "Protocol"  "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.           

#    Option "BaudRate"          "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# Some examples of extended input devices

# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection                               
#                                         
# Section "InputDevice"                   
#    Identifier "spaceball2"               
#    Driver     "spaceorb"                 
#    Option     "Device"        "/dev/cua0"
# EndSection                               
#                                         
# Section "InputDevice"                   
#    Identifier "touchscreen0"             
#    Driver     "microtouch"               
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"     
#    Option     "MaxX"          "15184"     
#    Option     "MinY"          "15372"     
#    Option     "MaxY"          "1230"     
#    Option     "ScreenNumber"  "0"         
#    Option     "ReportingMode" "Scaled"   
#    Option     "ButtonNumber"  "1"         
#    Option     "SendCoreEvents"           
# EndSection                               
#                                           
# Section "InputDevice"                     
#    Identifier "touchscreen1"             
#    Driver     "elo2300"                   
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"       
#    Option     "MaxX"          "3868"     
#    Option     "MinY"          "3858"     
#    Option     "MaxY"          "272"       
#    Option     "ScreenNumber"  "0"         
#    Option     "ReportingMode" "Scaled"   
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"         
#    Option     "SendCoreEvents"           
# EndSection                               

# **********************************************************************
# Monitor section                                                       
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.                       
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.                             

    HorizSync   31.5 - 50.0

#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.                         
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.                             

    VertRefresh 40-90

EndSection


# **********************************************************************
# Graphics device section                                               
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"           
    #VideoRam    4096             
    # Insert Clocks lines here if appropriate
EndSection                                   

# **********************************************************************
# Screen sections                                                       
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"     
# option.                                                               
Section "Screen"                                                         
    Identifier  "Screen 1"                                               
    Device      "VESA Framebuffer"                                       
    Monitor     "My Monitor"                                             

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.                                                 

#   DefaultDepth 8
#   DefaultDepth 16
   DefaultDepth 24
#   DefaultDepth 32

# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as         
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)                                             

    Subsection "Display"
        Depth       8   
        Modes "1024x768" "800x600" "640x480"
    EndSubsection                           
    Subsection "Display"                   
        Depth       16                     
        Modes "1024x768" "800x600" "640x480"
    EndSubsection                           
    Subsection "Display"                   
        Depth       24                     
        Modes "1024x768" "800x600" "640x480"
    EndSubsection                           
    Subsection "Display"                   
        Depth       32                     
        Modes "1024x768" "800x600" "640x480"
    EndSubsection                           

EndSection

# **********************************************************************
# ServerLayout sections.                                               
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout   
# section may be specified from the X server command line with the   
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section   
# is used alone.                                                       

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"     

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after   
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the   
# right of screen 1.                                                   

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".                                             

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

root@mody:~# cd pub/drivers/ati/
root@mody:~/pub/drivers/ati# ls
ati-driver-installer-9-3-x86.x86_64.run  ati-driver-installer-9-8-x86.x86_64.run
root@mody:~/pub/drivers/ati# rm ati-driver-installer-9-8-x86.x86_64.run         
root@mody:~/pub/drivers/ati# ls                                                 
ati-driver-installer-9-3-x86.x86_64.run                                         
root@mody:~/pub/drivers/ati# cd                                                 
root@mody:~# cat /etc/X11/xorg.conf-vesa                                       
# File generated by xf86config.                                                 

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#                                               
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense, 
# and/or sell copies of the Software, and to permit persons to whom the     
# Software is furnished to do so, subject to the following conditions:     
#                                                                           
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.                       
#                                                                           
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL 
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE   
# SOFTWARE.                                                                 
#                                                                           
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the   
# XFree86 Project.                                                         
#                                                                           

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.                                                           
# **********************************************************************

# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed   
# this out to me. :)                                                         

# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards     
# (although not every card will support every resolution).           

# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.                     
#                                                                         
# Enjoy! :)                                                               
# -- volkerdi@slackware.com                                               
#                                                                         

# **********************************************************************
# Module section -- this  section  is used to specify                   
# which dynamically loadable modules to load.                           
# **********************************************************************
#                                                                       
Section "Module"                                                       

# This loads the DBE extension module.

    Load        "dbe"   # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"                                         
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection                                                       

# This loads the font modules
    Load        "type1"     
    Load        "freetype"   
    #Load        "speedo"   

# This loads the GLX module
    Load       "glx"       

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set     
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.                                     

    RgbPath     "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath 
# command (or a combination of both methods)                             
#                                                                         
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).                           
#                                                                         

    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/OTF/" 
    FontPath   "/usr/share/fonts/TTF/" 
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/" 
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/75dpi/"         
    FontPath   "/usr/share/fonts/100dpi/"         
    FontPath   "/usr/share/fonts/cyrillic/"       

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.                                     

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.                                                 
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging 

#    Option     "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.                                                             

#    Option     "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.                     

#    Option     "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.         

#    Option     "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will   
# receive a protocol error.                                         

#    Option     "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option     "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.                                 

#    Option     "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option     "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

#    Option      "blank time"    "10"    # 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when   
# the driver supports it.                                             

#    Option      "standby time"  "20"
#    Option      "suspend time"  "30"
#    Option      "off time"      "60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.                                         

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices                                                         
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section                                   
# **********************************************************************

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "kbd"     
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),         
# uncomment the following line.                                       

#    Option     "Protocol"      "Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.                                                               

#    Option     "AutoRepeat"    "500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option     "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option     "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:                   
#                                                                   
#    Option     "XkbModel"      "pc102"                             
#    Option     "XkbModel"      "pc105"                             
#                                                                   
# If you have a Microsoft Natural keyboard, you can use:           
#                                                                   
#    Option     "XkbModel"      "microsoft"                         
#                                                                   
# If you have a US "windows" keyboard you will want:               
#                                                                   
#    Option     "XkbModel"      "pc104"                             
#                                                                   
# Then to change the language, change the Layout setting.           
# For example, a german layout can be obtained with:               
#                                                                   
#    Option     "XkbLayout"     "de"                               
#                                                                   
# or:                                                               
#                                                                   
#    Option     "XkbLayout"     "de"                               
#    Option     "XkbVariant"    "nodeadkeys"                       
#                                                                   
# If you'd like to switch the positions of your capslock and       
# control keys, use:                                               
#                                                                   
#    Option     "XkbOptions"    "ctrl:swapcaps"                     


# These are the default XKB settings for X.Org
#                                             
#    Option     "XkbRules"      "xorg"       
#    Option     "XkbModel"      "pc105"       
#    Option     "XkbLayout"     "us"         
#    Option     "XkbVariant"    ""           
#    Option     "XkbOptions"    ""           

EndSection


# **********************************************************************
# Core Pointer's InputDevice section                                   
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver      "mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:       

#    Option     "Protocol"      "Auto"

# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue                       
    Option "Protocol"    "PS/2"                                   

# The mouse device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.       

    Option "Device"      "/dev/mouse"
#   Option "Device"      "/dev/psaux"
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.                                             

#    Option "Protocol"  "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.           

#    Option "BaudRate"          "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# Some examples of extended input devices

# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection                               
#                                         
# Section "InputDevice"                   
#    Identifier "spaceball2"               
#    Driver     "spaceorb"                 
#    Option     "Device"        "/dev/cua0"
# EndSection                               
#                                         
# Section "InputDevice"                   
#    Identifier "touchscreen0"             
#    Driver     "microtouch"               
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"     
#    Option     "MaxX"          "15184"     
#    Option     "MinY"          "15372"     
#    Option     "MaxY"          "1230"     
#    Option     "ScreenNumber"  "0"         
#    Option     "ReportingMode" "Scaled"   
#    Option     "ButtonNumber"  "1"         
#    Option     "SendCoreEvents"           
# EndSection                               
#                                           
# Section "InputDevice"                     
#    Identifier "touchscreen1"             
#    Driver     "elo2300"                   
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"       
#    Option     "MaxX"          "3868"     
#    Option     "MinY"          "3858"     
#    Option     "MaxY"          "272"       
#    Option     "ScreenNumber"  "0"         
#    Option     "ReportingMode" "Scaled"   
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"         
#    Option     "SendCoreEvents"           
# EndSection                               

# **********************************************************************
# Monitor section                                                       
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.                       
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.                             

    HorizSync   31.5 - 50.0

#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.                         
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.                             

    VertRefresh 40-90

EndSection


# **********************************************************************
# Graphics device section                                               
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "vesa"           
    #VideoRam    4096             
    # Insert Clocks lines here if appropriate
EndSection                                   

# **********************************************************************
# Screen sections                                                       
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"     
# option.                                                               
Section "Screen"                                                         
    Identifier  "Screen 1"                                               
    Device      "VESA Framebuffer"                                       
    Monitor     "My Monitor"                                             

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.                                                 

#   DefaultDepth 8
#   DefaultDepth 16
   DefaultDepth 24
#   DefaultDepth 32

# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as         
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)                                             

    Subsection "Display"
        Depth       8   
        Modes "1024x768" "800x600" "640x480"
    EndSubsection                           
    Subsection "Display"                   
        Depth       16                     
        Modes "1024x768" "800x600" "640x480"
    EndSubsection                           
    Subsection "Display"                   
        Depth       24                     
        Modes "1024x768" "800x600" "640x480"
    EndSubsection                           
    Subsection "Display"                   
        Depth       32                     
        Modes "1024x768" "800x600" "640x480"
    EndSubsection                           

EndSection

# **********************************************************************
# ServerLayout sections.                                               
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout   
# section may be specified from the X server command line with the   
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section   
# is used alone.                                                       

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"     

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Volevo chiedervi se c'è qualcosa che non va e, in seconda battuta, se qualcuno ha seguito l'howto pubblicato qui per far funzionare i driver Catalyst su una Slackware 13.0 con kernel 2.6.29.x.
Grazie,

Burroughs.
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe" (Albert Einstein)
Avatar utente
Burroughs
Linux 2.6
Linux 2.6
 
Messaggi: 968
Iscritto il: mer dic 15, 2004 0:00
Località: Lago Patria (NA)
Nome Cognome: Andrea Lutri
Kernel: 3.16.0
Desktop: KDE SC 4.13.3
Distribuzione: Arch Linux

Re: Slackware 13.0 e malfunzionamenti xorg

Messaggioda brainvision » mar set 15, 2009 17:54

Non so se sono io a non aver capito tanto bene o magari tu che ti sei perso parecchi dei post su questo argomento e simili..
Da un po' di current a questa parte e soprattutto con la nuova slackware 13, il nuovo Xorg non ha più bisogno obbligatoriamente di un file xorg.conf.. Infatti il server non va più a leggere le info provviste nella conf ma si appoggia, diciamo così, ad Hal, al quale succhia le impostazioni da usare (è come se creasse un file xorg.conf di per sè, ma senza mai memorizzarlo). Il log, comunque, è sempre disponibile nel file /var/log/Xorg0.log..
Il file di cui tu parli, xorg.conf-vesa, funge solo da esempio e non viene assolutamente usato, a meno di specificarlo appositamente al momento di avviare X (credo il comando sia tipo
Codice: Seleziona tutto
X /etx/X11/xorg.conf-vesa
ma non ne sono sicuro, comunque in teoria volendo puoi sempre rinominarlo in xorg.conf.. è solo così che viene finalmente usato.. E comunque, xorg.conf-vesa utilizza i dirver vesa e non quelli specifici della tua scheda video, quindi ciò vuol dire che non avrai abilitata l'accelerazione grafica, il 3d eccetera eccetera..

Tutto questo che ho ora scrittoè stato discusso in almeno un altro paio o forse più post qui su questo forum.. Rappresenta una delle novità più importanti di Xorg da un paio di mesi a questa parte.. Strano non averne ancora sentito parlare..
Comunque, per chiarezza, ripeto, postare qui xorg.conf-vesa non serve a niente, perché a meno di non specificarlo manualmente esso non viene affatto seguito quando si da startx.. Se si avvia X senza avere un file xorg.conf (e solo così chiamato) allora il server usa le impostazioni rilevate da Hal.. e a quanto pare, sembra funzionare abbastanza bene..

Spero di non aver confuso ancora di più le idee..
Avatar utente
brainvision
Packager
Packager
 
Messaggi: 756
Iscritto il: ven dic 26, 2008 18:23
Località: bologna (bo)
Nome Cognome: Leonardo Totaro
Slackware: x86_64-current
Kernel: 3.7.1
Desktop: xfce 4.10

Re: Slackware 13.0 e malfunzionamenti xorg

Messaggioda Burroughs » mar set 15, 2009 18:17

brainvision ha scritto:Non so se sono io a non aver capito tanto bene o magari tu che ti sei perso parecchi dei post su questo argomento e simili..[CUT]

Alcune di queste info le conoscevo già, comunque, se leggi bene, il mio post verteva su due problematiche: a) il malfunzionamento del server xorg; b) eventuale installazione dei driver proprietari, alla luce di quell'howto che citavo più sopra.
Grazie comunque per il tuo supporto.

Burroughs.

Ps: questo è il log del server grafico:
Codice: Seleziona tutto
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux mody 2.6.29.6-smp #1 SMP Sat Sep 12 12:28:24 CEST 2009 i686
Build Date: 03 August 2009  06:51:50PM
 
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 15 18:05:59 2009
(II) Loader magic: 0x1de0
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 5.0
   X.Org XInput driver : 4.0
   X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:5:0) 1002:791f:1631:c108 rev 0, Mem @ 0xc0000000/268435456, 0xfd8f0000/65536, 0xfd700000/1048576, I/O @ 0x00008800/256
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
   Section "Device"
      Identifier   "Builtin Default ati Device 0"
      Driver   "ati"
   EndSection
   Section "Screen"
      Identifier   "Builtin Default ati Screen 0"
      Device   "Builtin Default ati Device 0"
   EndSection
   Section "Device"
      Identifier   "Builtin Default vesa Device 0"
      Driver   "vesa"
   EndSection
   Section "Screen"
      Identifier   "Builtin Default vesa Screen 0"
      Device   "Builtin Default vesa Device 0"
   EndSection
   Section "Device"
      Identifier   "Builtin Default fbdev Device 0"
      Driver   "fbdev"
   EndSection
   Section "Screen"
      Identifier   "Builtin Default fbdev Screen 0"
      Device   "Builtin Default fbdev Device 0"
   EndSection
   Section "ServerLayout"
      Identifier   "Builtin Default Layout"
      Screen   "Builtin Default ati Screen 0"
      Screen   "Builtin Default vesa Screen 0"
      Screen   "Builtin Default fbdev Screen 0"
   EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
   Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
   Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
   Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
   Entry deleted from font path.
(==) FontPath set to:
   /usr/share/fonts/TTF,
   /usr/share/fonts/OTF,
   /usr/share/fonts/Type1,
   /usr/share/fonts/misc,
   /usr/share/fonts/75dpi/:unscaled,
   /usr/share/fonts/100dpi/:unscaled,
   /usr/share/fonts/75dpi,
   /usr/share/fonts/100dpi,
   /usr/share/fonts/cyrillic,
   built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
   If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [9] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [10] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [11] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [12] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [13] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [14] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [15] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [16] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [17] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [18] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [19] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [20] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [21] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [22] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [23] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [24] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [25] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [26] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [27] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [28] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [29] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 1.1.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
   compiled for 1.6.2, module version = 6.12.2
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
   compiled for 1.6.2, module version = 6.12.2
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 2.2.1
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
   ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
   ATI Radeon Mobility X300 (M24) 3152 (PCIE),
   ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
   ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
   ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
   ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
   ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
   ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
   ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
   ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
   ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
   ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
   ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
   ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
   ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
   ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
   ATI Radeon X800PRO (R420) JI (AGP),
   ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
   ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
   ATI Radeon Mobility 9800 (M18) JN (AGP),
   ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
   ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
   ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
   ATI Radeon Mobility M7 LW (AGP),
   ATI Mobility FireGL 7800 M7 LX (AGP),
   ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
   ATI FireGL Mobility 9000 (M9) Ld (AGP),
   ATI Radeon Mobility 9000 (M9) Lf (AGP),
   ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
   ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
   ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
   ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
   ATI Radeon 9800XT NJ (AGP),
   ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
   ATI Radeon Mobility 9600 (M10) NQ (AGP),
   ATI Radeon Mobility 9600 (M11) NR (AGP),
   ATI Radeon Mobility 9600 (M10) NS (AGP),
   ATI FireGL Mobility T2 (M10) NT (AGP),
   ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
   ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
   ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
   ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
   ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
   ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
   ATI Radeon Mobility X300 (M22) 5460 (PCIE),
   ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
   ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
   ATI Radeon X800PRO (R423) UI (PCIE),
   ATI Radeon X800LE (R423) UJ (PCIE),
   ATI Radeon X800SE (R423) UK (PCIE),
   ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
   ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
   ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
   ATI FireGL unknown (R423) UR (PCIE),
   ATI FireGL unknown (R423) UT (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility Radeon X700 XL (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
   ATI Radeon Mobility 9100 IGP (U3) 5835,
   ATI Radeon XPRESS 200 5954 (PCIE),
   ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
   ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
   ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
   ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
   ATI Radeon XPRESS 200M 5975 (PCIE),
   ATI Radeon XPRESS 200 5A41 (PCIE),
   ATI Radeon XPRESS 200M 5A42 (PCIE),
   ATI Radeon XPRESS 200 5A61 (PCIE),
   ATI Radeon XPRESS 200M 5A62 (PCIE),
   ATI Radeon X300 (RV370) 5B60 (PCIE),
   ATI Radeon X600 (RV370) 5B62 (PCIE),
   ATI Radeon X550 (RV370) 5B63 (PCIE),
   ATI FireGL V3100 (RV370) 5B64 (PCIE),
   ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
   ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
   ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
   ATI Mobility Radeon X800 XT (M28) (PCIE),
   ATI Mobility FireGL V5100 (M28) (PCIE),
   ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
   ATI Radeon X850 XT PE (R480) (PCIE),
   ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
   ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
   ATI Radeon X850 XT (R480) (PCIE),
   ATI Radeon X800XT (R423) 5D57 (PCIE),
   ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
   ATI Radeon X700 PRO (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
   ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
   ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
   ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
   ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
   ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
   ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
   ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
   ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
   ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
   ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
   ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
   ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
   ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
   ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
   ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
   ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
   ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
   ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
   ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
   ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
   ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
   ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
   ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
   ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
   ATI Mobility Radeon X1700, ATI Radeon X2300HD,
   ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
   ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
   ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
   ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
   ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
   ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
   ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
   ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
   ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
   ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
   ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
   ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
   ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
   ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
   ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
   ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
   ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
   ATI Mobility RADEON M98, ATI Radeon 4800 Series,
   ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
   ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
   ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
   ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
   ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
   ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
   ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
   ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
   ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
   ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
   ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
   ATI Mobility Radeon HD 3850 X2, ATI RV670,
   ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
   ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
   ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
   ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
   ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
   ATI Mobility Radeon 4500 Series, ATI RV630,
   ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
   ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
   ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
   ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
   ATI FireGL V3600, ATI Radeon HD 2600 LE,
   ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
   ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
   ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
   ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
   ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
   ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
   ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
   ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
   ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
   ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
   ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
   ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
   ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
   ATI Radeon HD Graphics, ATI Radeon Graphics,
   ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
   ATI Radeon Graphics
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [9] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [10] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [11] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [12] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [13] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [14] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [15] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [16] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [17] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [18] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [19] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [20] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [21] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [22] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [23] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [24] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [25] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [26] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [27] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [28] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [29] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [9] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [10] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [11] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [12] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [13] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [14] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [15] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [16] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [17] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [18] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [19] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [20] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [21] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [22] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [23] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [24] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [25] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [26] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [27] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [28] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [29] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [30] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [31] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [32] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [33] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [34] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000fd8f0000
(II) RADEON(0): MMIO registers at 0x00000000fd8f0000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
   "Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 0.1.0
   ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x791f)
(WW) RADEON(0): R500 support is under development. Please report any issues to xorg-driver-ati@lists.x.org
(--) RADEON(0): Linear framebuffer at 0x00000000c0000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 1.0.0
   ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
   SubsystemVendorID: 0x1631 SubsystemID: 0xc108
   IOBaseAddress: 0x8800
   Filename: BR25605A.bin
   BIOS Bootup Message:
ATI Radeon Xpress ASID:A12324.001$                                         

(II) RADEON(0): Framebuffer space used by Firmware (kb): 16
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffc000
(II) RADEON(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffc000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 400000
(II) RADEON(0): Default Memory Clock: 200000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.

(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 400.000000, mclk: 200.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=13 min=64800 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71110
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 3, VSyncWidth: 6
encoder: 0x15
encoder: 0xf
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_KLDSCP_DAC1
  DDC reg: 0x7e50
(II) RADEON(0): Port1:
  XRANDR name: LVDS
  Connector: LVDS
  LCD1: INTERNAL_LVTM1
  DDC reg: 0x7e40
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1280x800
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 1.2.1
   ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
   of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [9] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [10] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [11] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [12] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [13] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [14] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [15] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [16] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [17] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [18] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [19] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [20] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
   [21] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
   [22] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
   [23] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [24] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [25] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [26] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [27] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [28] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [29] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [30] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [31] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [32] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
   [33] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
   [34] 0   0   0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit c0000000 0 0
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0):   mem_size         : 0x10000000
(II) RADEON(0):   MC_FB_LOCATION   : 0xb7ffa800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1b80000
(II) RADEON(0): Will use depth buffer at offset 0x21c0000
(II) RADEON(0): Will use 221184 kb for textures at offset 0x2800000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf8a5a000
(II) RADEON(0): [pci] ring handle = 0xf8a5a000
(II) RADEON(0): [pci] Ring mapped at 0xa7632000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf8b5b000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb7f03000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf8b5c000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa7432000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf8d5c000
(II) RADEON(0): [pci] GART Texture map mapped at 0xa57b2000
(II) RADEON(0): [drm] register handle = 0x2fb1e000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):   MC_FB_LOCATION   : 0xb7ffa800 0xb7ffa800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 18
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xb7ffa800 is: 0xb7ffa800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x003f0000 is: 0xb9ffb800
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):   MC_FB_LOCATION   : 0xb7ffa800 0xb7ffa800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xb9ffb800
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Scanline Image Writes
   Setting up tile and stipple cache:
      32 128x128 slots
      32 256x256 slots
      16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Mode 1280x800 - 1440 823 0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):   MC_FB_LOCATION   : 0xb7ffa800 0xb7ffa800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xb9ffb800
freq: 71110000
best_freq: 71110427
best_feedback_div: 581
best_ref_div: 9
best_post_div: 13
(II) RADEON(0): crtc(0) Clock: mode 71110, PLL 71110
(II) RADEON(0): crtc(0) PLL  : refdiv 9, fbdiv 0x245(581), pdiv 13
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output digital setup success
Enable CRTC 0 success
Unblank CRTC 0 success
Output LCD1 enable success
Output CRT1 disable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device Asus Laptop extra buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 2.2.5
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event7"
(II) Asus Laptop extra buttons: Found 9 mouse buttons
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
(**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
   compiled for 1.6.3, module version = 1.1.3
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event6"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1280x800
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1280x800
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1280x800
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1280x800
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe" (Albert Einstein)
Avatar utente
Burroughs
Linux 2.6
Linux 2.6
 
Messaggi: 968
Iscritto il: mer dic 15, 2004 0:00
Località: Lago Patria (NA)
Nome Cognome: Andrea Lutri
Kernel: 3.16.0
Desktop: KDE SC 4.13.3
Distribuzione: Arch Linux

Re: Slackware 13.0 e malfunzionamenti xorg

Messaggioda 414N » mer set 16, 2009 9:37

Burroughs ha scritto:
Codice: Seleziona tutto
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled

Prova ad abilitare l'accelerazione EXA, magari cambia la musica. Io l'ho fatto con un xorg.conf minimale:
Codice: Seleziona tutto
Section "Device"
        Identifier      "ATI Radeon X800 XT PE"
        Driver          "ati"
        Option          "AccelMethod"           "EXA"
EndSection

Tutto il resto viene autorilevato.
Avatar utente
414N
Iper Master
Iper Master
 
Messaggi: 2884
Iscritto il: mer feb 13, 2008 16:19
Località: Bulagna
Slackware: 14.0 (x64)
Kernel: 3.2.29
Desktop: LXDE


Torna a Hardware

Chi c’è in linea

Visitano il forum: Nessuno e 3 ospiti