Pagina 2 di 3

Inviato: mar set 06, 2005 23:16
da king
log di X pronto:


_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/darkstar:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: Linux 2.4.29 i686 [ELF]
Current Operating System: Linux darkstar 2.4.29 #6 Thu Jan 20 16:30:37 PST 2005 i686
Build Date: 23 January 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 6 23:15:18 2005
(==) Using config file: "/etc/X11/xorg.conf"
(EE) VGA(0): Driver can't support depth 24
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.

Inviato: mar set 06, 2005 23:24
da king
gia che ci sono posto anche xorg.conf.....potrebbe essere utile


# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"


RgbPath "/usr/X11R6/lib/X11/rgb"


FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"



# Option "NoTrapSignals"


# Option "DontVTSwitch"


# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"


# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "it"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# Option "Protocol" "Xqueue"


# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.5 - 48.5

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-70

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"



Driver "vga"

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
Identifier "My Video Card"
Driver "vga"
# unsupported card
#VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
Identifier "Screen 1"
Device "My Video Card"
Monitor "My Monitor"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"


Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
# Mode 0666
# EndSection

Inviato: mer set 07, 2005 0:16
da clodo
Dove c'è Driver "vga" metti almeno "vesa", poi indaga su scheda video e frequenze e tipo di schermo (4:3 , 16:9 0 16:10 ecc.). e poi hai due sezioni per la scheda video, ne basta una sola, o la prima o la seconda(standard vga o my video card)

Inviato: mer set 07, 2005 0:22
da king
ora cambio i driver,lo schermo è wide,quindi 16:9..in piu ho trovato questo sito newsletter.toshiba-tro.de ,dove parlano di linux,ma non ho capito un tubo...inltre il .conf di xfree86 è come quello di xorg?

Inviato: mer set 07, 2005 0:23
da gallows
Ma il comando che ti avevo suggerito lo hai provato?

Inviato: mer set 07, 2005 0:37
da clodo
king ha scritto:ora cambio i driver,lo schermo è wide,quindi 16:9..in piu ho trovato questo sito newsletter.toshiba-tro.de ,dove parlano di linux,ma non ho capito un tubo...inltre il .conf di xfree86 è come quello di xorg?



Toshiba
Satellite M40X-122 Centrino 1.6Ghz 2MB 512MB HD60 DVD-RW XP Home
TruBrite 15.4" Wide TFT, video ATI MOBILITYRADEON X300, 64 MB DDR Video RAM, 16x PCI Express,DVD SM double Layer (DVDR/RW, DVD-RAM),10/100,802.11b/g,56K,TV-out (s-video),WinXPHome

ATI MOBILITYRADEON X300--> non avere fretta, c'è tutto il tempo per configurarla......... :lol: [/i]

Inviato: mer set 07, 2005 0:38
da king
si.l'ho provato,ma dopo l'esecuzione di startx si inchida tutto...

ora modfico xorg.conf,ma non vedo la configurazione della seconda sezione video....

Inviato: mer set 07, 2005 0:41
da king
il mio problema non è la config della scheda video,ma il fatto che X non va...comunque arriverò anche a quello...ciao :-)

Inviato: mer set 07, 2005 0:43
da clodo
king ha scritto:si.l'ho provato,ma dopo l'esecuzione di startx si inchida tutto...

ora modfico xorg.conf,ma non vedo la configurazione della seconda sezione video....


Prima:

Codice: Seleziona tutto

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"



Driver "vga"

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection



Seconda

Codice: Seleziona tutto

Section "Device"
Identifier "My Video Card"
Driver "vga"
# unsupported card
#VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection

Inviato: mer set 07, 2005 0:47
da clodo
king ha scritto:il mio problema non è la config della scheda video,ma il fatto che X non va :-)


Se la rileggi, ridi anche tu 8)

Inviato: mer set 07, 2005 0:48
da king
:roll: non capisco....sarà la stanchezza...

Inviato: mer set 07, 2005 0:50
da king
quale delle due dovrei rimuovere?

Inviato: mer set 07, 2005 0:57
da king
l'ho capita....

Inviato: mer set 07, 2005 1:06
da clodo
prima della nanna ti do un xorg.conf :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
Section "Files"

FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
FontPath "/usr/share/fonts/truetype"
FontPath "usr/share/fonts/type1"

EndSection

Section "Module"
Load "bitmap"
#Load "dbe"
#Load "ddc"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
#Load "int10"
Load "record"
Load "type1"
#Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV34M [GeForce FX Go 5200]"
Option "RenderAccel" "true"
Option "TVOutFormat" "SVIDEO"
Option "UseEdidFreqs" "false"
Option "IgnoreEDID" "true"
Option "NvAGP" "2"
#Option "AllowGLXWithComposite" "true"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Monitor Generico"
Option "dpms"
HorizSync 30-67
VertRefresh 30-60
Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV34M [GeForce FX Go 5200]"
Monitor "Monitor Generico"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1280x768" "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection

#Section "Extensions"
#Option "Composite" "Enable"
#Option "RENDER" "Enable"
#EndSection

Section "DRI"
Mode 0666
EndSection

Così, a mo' d'esempio, su un acer1360 con schermo wxga 15,4'...........

Inviato: mer set 07, 2005 11:33
da king
l'unica differenza che vedo sono i driver nvidia invece che quelli generici...