Repository 32bit  Forum
Repository 64bit  Wiki

ACPI non vede la batteria ....

Scrivete su questo forum se avete problemi o volete dare buoni consigli sui computer portatili (Laptop).

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Citare il modello preciso del laptop in questione.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

ACPI non vede la batteria ....

Messaggioda beato_angelico256 » dom ott 02, 2005 11:15

ho un problema con l'ACPI: riesco a gestire il risparmio energetico, riesco a impostare il driver di scaling (ho il centrino) e tutto il resto... ma non vede assolutamente la batteria, e quindi non mi dice la carica rimanente.Quando è inserita, in /proc/acpi/battery/bat1/ state o info (non mi ricordo) mi dice che c'è stato un errore mentre si tentava di stabilire lo stato ....Il supporto acpi per la batteria è statico nel kernel.
questo è il dmesg ,gli errori sono alla fine ma posto tutto perchè magari c'è qualcosa degno di nota anche nella prima parte

Codice: Seleziona tutto
 

root@Slack:~# dmesg
ause of resource collisions
PCI: Device 0000:00:1c.1 not available because of resource collisions
PCI: Device 0000:00:1c.2 not available because of resource collisions
vesafb: framebuffer at 0xd0000000, mapped to 0xe0a80000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:ad8c
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
acpi_processor-0521 [30] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x1
ACPI: Thermal Zone [THRM] (57 C)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
acpi_bus-0212 [58] acpi_bus_set_power    : Device is not power manageable
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TOSHIBA MK8025GAS, ATA DISK drive
hdb: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hda4
hdb: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.12 loaded.
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:06:01.2[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[c8217000-c82177ff]  Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: Loaded CMP driver
ACPI: PCI Interrupt 0000:06:01.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:06:01.0 [1025:0066]
Yenta: ISA IRQ mask 0x08f8, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
usbmon: debugfs is not available
acpi_bus-0212 [58] acpi_bus_set_power    : Device is not power manageable
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc8000000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28 12:20:13 2005 UTC).
ALSA device list:
  No soundcards found.
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.1 (4084 buckets, 32672 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
swsusp: Resume From Partition /dev/hda7
PM: Checking swsusp image.
swsusp: Suspend partition has wrong signature?
swsusp: Error -22 check for resume file
PM: Resume from disk failed.
ACPI wakeup devices:
RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC MODM
ACPI: (supports S0 S3 S4 S5)
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f000046d52f]
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 196k freed
Adding 208804k swap on /dev/hda7.  Priority:-1 extents:1
Linux agpgart interface v0.101 (c) Dave Jones
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 428 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[fglrx] module loaded - fglrx 8.16.20 [Aug 16 2005] on minor 0
tg3.c:v3.37 (August 25, 2005)
acpi_bus-0212 [60] acpi_bus_set_power    : Device is not power manageable
ACPI: PCI Interrupt 0000:06:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:8a:cc:80
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000]
acpi_bus-0212 [60] acpi_bus_set_power    : Device is not power manageable
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 54161 usecs
intel8x0: clocking to 48000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist
NFSD: starting 90-second grace period
[fglrx] Maximum main memory to use for locked dma buffers: 428 MBytes.
[fglrx] free  PCIe = 51118080
[fglrx] max   PCIe = 51118080
[fglrx] free  LFB = 119762944
[fglrx] max   LFB = 119762944
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total PCIe = 16384
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [297] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [289] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [491] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [483] acpi_battery_get_statu: Error evaluating _BST
synaptics: using relaxed packet validation
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [693] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [685] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [898] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [890] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [1118] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1110] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [1277] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1269] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [1496] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1488] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [1714] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1706] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [1918] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1910] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [2126] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2118] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [2283] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2275] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [2511] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2503] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [2721] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2713] acpi_battery_get_statu: Error evaluating _BST
root@Slack:~# dmesg
00:00:1e.3[B] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TOSHIBA MK8025GAS, ATA DISK drive
hdb: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hda4
hdb: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.12 loaded.
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:06:01.2[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[c8217000-c82177ff]  Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: Loaded CMP driver
ACPI: PCI Interrupt 0000:06:01.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:06:01.0 [1025:0066]
Yenta: ISA IRQ mask 0x08f8, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
usbmon: debugfs is not available
acpi_bus-0212 [58] acpi_bus_set_power    : Device is not power manageable
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc8000000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28 12:20:13 2005 UTC).
ALSA device list:
  No soundcards found.
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.1 (4084 buckets, 32672 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
swsusp: Resume From Partition /dev/hda7
PM: Checking swsusp image.
swsusp: Suspend partition has wrong signature?
swsusp: Error -22 check for resume file
PM: Resume from disk failed.
ACPI wakeup devices:
RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC MODM
ACPI: (supports S0 S3 S4 S5)
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f000046d52f]
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 196k freed
Adding 208804k swap on /dev/hda7.  Priority:-1 extents:1
Linux agpgart interface v0.101 (c) Dave Jones
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 428 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[fglrx] module loaded - fglrx 8.16.20 [Aug 16 2005] on minor 0
tg3.c:v3.37 (August 25, 2005)
acpi_bus-0212 [60] acpi_bus_set_power    : Device is not power manageable
ACPI: PCI Interrupt 0000:06:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:8a:cc:80
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000]
acpi_bus-0212 [60] acpi_bus_set_power    : Device is not power manageable
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 54161 usecs
intel8x0: clocking to 48000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist
NFSD: starting 90-second grace period
[fglrx] Maximum main memory to use for locked dma buffers: 428 MBytes.
[fglrx] free  PCIe = 51118080
[fglrx] max   PCIe = 51118080
[fglrx] free  LFB = 119762944
[fglrx] max   LFB = 119762944
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total PCIe = 16384
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [297] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [289] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [491] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [483] acpi_battery_get_statu: Error evaluating _BST
synaptics: using relaxed packet validation
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [693] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [685] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [898] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [890] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [1118] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1110] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [1277] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1269] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [1496] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1488] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [1714] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1706] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [1918] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [1910] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [2126] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2118] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [2283] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2275] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [2511] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2503] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [2721] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2713] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [2928] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [2920] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [3137] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [3129] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [3291] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [3283] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [3508] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [3500] acpi_battery_get_statu: Error evaluating _BST
beato_angelico256
Linux 2.6
Linux 2.6
 
Messaggi: 578
Iscritto il: dom mag 01, 2005 23:00

Messaggioda beato_angelico256 » dom ott 02, 2005 11:24

il notebook è un acer aspire 1692, kernel 2.6.11, slack 10.2 (ma la situazione era uguale anche con la 10.1)
beato_angelico256
Linux 2.6
Linux 2.6
 
Messaggi: 578
Iscritto il: dom mag 01, 2005 23:00

Messaggioda Bart » dom ott 02, 2005 17:51

Ciao, ma secondo te uno si mette a guardare quel post chilometrico?:D
Hai settato sicuramente male l'acpi. Allora con calma.
Se abiliti acpi controlla che non ci sia abilitato apm perchè posso fare conflitto. Poi nel kernel, alla voce acpi usa questa configurazione:
Codice: Seleziona tutto
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set


Ovviamente per il frequency scaling devi fare le opportune modifiche ma per quanto riguarda la prima parte ( ACPI (Advanced Configuration and Power Interface) Support) che alla fine è quella che ti interessa, puoi lasciare così. Ciao ;)
Bart
Staff
Staff
 
Messaggi: 4248
Iscritto il: dom ago 08, 2004 23:00
Località: Rimini

Messaggioda beato_angelico256 » dom ott 02, 2005 18:13

se qualcuno non avesse nulla da fare..... comunque:
il mio config è come quello che mi hai passato, di diverso ho solo questa riga (nel mio):
# CONFIG_X86_PM_TIMER is not set

non so se possa dipendere da questo....
quello che non fa andare il rilevamento della batteria dovrebbe essere questo errore
Codice: Seleziona tutto
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [3283] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [3508] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND


qualcuno ha già visto qualcosa del genere ? ....
beato_angelico256
Linux 2.6
Linux 2.6
 
Messaggi: 578
Iscritto il: dom mag 01, 2005 23:00

Messaggioda absinthe » gio ott 06, 2005 21:25

beato_angelico256 ha scritto:se qualcuno non avesse nulla da fare..... comunque:
il mio config è come quello che mi hai passato, di diverso ho solo questa riga (nel mio):
# CONFIG_X86_PM_TIMER is not set

non so se possa dipendere da questo....
quello che non fa andare il rilevamento della batteria dovrebbe essere questo errore
Codice: Seleziona tutto
 psparse-1172: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node dfe193a8), AE_NOT_FOUND
acpi_battery-0208 [3283] acpi_battery_get_statu: Error evaluating _BST
  psargs-0362: *** Error: Looking up [Z00C] in namespace, AE_NOT_FOUND
search_node dfe195a8 start_node dfe195a8 return_node 00000000
 dswexec-0457 [3508] ds_exec_end_op        : [Index]: Could not resolve operands, AE_NOT_FOUND


qualcuno ha già visto qualcosa del genere ? ....



ho lo stesso portatile e per come la vedo io è un problema di supporto... secondo me non vede la batteria tutto lì.... tra l'altro hai provato gkrellm??? la cosa strana è che lui la vede alla grande!?!.... io non ho ancora risolto anche perchè se fai una googlata scopri che il problema è nella tabella dsdt usata dall'acpi. occorre crearne una ad hoc e patchare il kernel (c'è uno che lo ha fatto con il 1694) però io ne ne guardo bene :)...

M.
Avatar utente
absinthe
Iper Master
Iper Master
 
Messaggi: 2354
Iscritto il: sab mag 14, 2005 23:00
Località: Prato
Nome Cognome: Matteo Nunziati
Slackware: 12.1 - defunct
Kernel: 2.6.32-5-amd64
Desktop: gnome
Distribuzione: debian squeeze

Messaggioda supertoms » gio ott 06, 2005 21:41

che versione di kernel usi?
io ho problema con un acer travelmate 4001. ho installato patch di acpi e smart batteries ma con il 2.6.13 non vuole proprio andare mentre con il 2.6.10 tutto ok
Avatar utente
supertoms
Linux 1.0
Linux 1.0
 
Messaggi: 89
Iscritto il: mar giu 21, 2005 23:00
Località: Lissone Monza Italy

Messaggioda beato_angelico256 » gio ott 06, 2005 22:45

absinthe ha scritto:ho lo stesso portatile e per come la vedo io è un problema di supporto... secondo me non vede la batteria tutto lì.... tra l'altro hai provato gkrellm??? la cosa strana è che lui la vede alla grande!?!.... io non ho ancora risolto anche perchè se fai una googlata scopri che il problema è nella tabella dsdt usata dall'acpi. occorre crearne una ad hoc e patchare il kernel (c'è uno che lo ha fatto con il 1694) però io ne ne guardo bene :)...

M.


azz... a me nn la vede neanche il gkrellm.... strano che a te la veda...
beato_angelico256
Linux 2.6
Linux 2.6
 
Messaggi: 578
Iscritto il: dom mag 01, 2005 23:00

Messaggioda absinthe » sab ott 08, 2005 12:05

beato_angelico256 ha scritto:
absinthe ha scritto:ho lo stesso portatile e per come la vedo io è un problema di supporto... secondo me non vede la batteria tutto lì.... tra l'altro hai provato gkrellm??? la cosa strana è che lui la vede alla grande!?!.... io non ho ancora risolto anche perchè se fai una googlata scopri che il problema è nella tabella dsdt usata dall'acpi. occorre crearne una ad hoc e patchare il kernel (c'è uno che lo ha fatto con il 1694) però io ne ne guardo bene :)...

M.


azz... a me nn la vede neanche il gkrellm.... strano che a te la veda...


:shock:

allora aspetta che appena posso ricontrollo... eppur rimembro una qualche reazion de lo strumento alla presenza dell'ingombrante ordigno... boh....

M.
Avatar utente
absinthe
Iper Master
Iper Master
 
Messaggi: 2354
Iscritto il: sab mag 14, 2005 23:00
Località: Prato
Nome Cognome: Matteo Nunziati
Slackware: 12.1 - defunct
Kernel: 2.6.32-5-amd64
Desktop: gnome
Distribuzione: debian squeeze

Messaggioda absinthe » mar ott 11, 2005 18:02

ok scusate l'errore in effetti mi ricordavo male... neppure gkrellm la vede... comunque sto leggendo alcune cose sulla dsdt e non sono più tanto dubbioso sulla ricompilazione della stessa:

in pratica quando l'acpi non vede una cosa è bene controllare la compilazione della dsdt con:

#> dmesg | grep -i dsdt

se si ottiene:

ACPI: DSDT (v001 INTEL ALVISO 0x06040000 MSFT 0x0100000e) @ 0x00000000

significa che è stata compilata con un compilatore microsoft e (ma che strano...) non è conforme allo standard acpi... quindi occorre usarne una compilata ad esempio con il compilatore intel.... al momento mi sto informando ... vi farò sapere...
a titolo indicativo vi lascio due link:

http://forums.gentoo.org/viewtopic.php?t=122145
http://acpi.sourceforge.net/

M.
Avatar utente
absinthe
Iper Master
Iper Master
 
Messaggi: 2354
Iscritto il: sab mag 14, 2005 23:00
Località: Prato
Nome Cognome: Matteo Nunziati
Slackware: 12.1 - defunct
Kernel: 2.6.32-5-amd64
Desktop: gnome
Distribuzione: debian squeeze

Messaggioda supertoms » mer ott 12, 2005 18:04

a me da questo messaggio
Codice: Seleziona tutto
ACPI: DSDT (v001 ACER   Kestrel  0x20020909 MSFT 0x0100000e) @ 0x00000000


la cosa strana è che la dsdt è ricompilata con il compilatore intel iasl e "dovrebbe" essere caricata con la initrd come spiegato sul precedente link del forum gentoo.

Con il ker 2.6.10 funziona senza modifiche
Avatar utente
supertoms
Linux 1.0
Linux 1.0
 
Messaggi: 89
Iscritto il: mar giu 21, 2005 23:00
Località: Lissone Monza Italy

Messaggioda absinthe » lun ott 17, 2005 22:40

mi spiace ma sono incasinatissimo.... ho appena fatto in tempo ieri ad aggiornare la slacky a 10.2 (a parte udev...grrrrr). appena ho il tempo di provare ti dico cosa ne ho tirato fuori....

M.
Avatar utente
absinthe
Iper Master
Iper Master
 
Messaggi: 2354
Iscritto il: sab mag 14, 2005 23:00
Località: Prato
Nome Cognome: Matteo Nunziati
Slackware: 12.1 - defunct
Kernel: 2.6.32-5-amd64
Desktop: gnome
Distribuzione: debian squeeze


Torna a Laptop

Chi c’è in linea

Visitano il forum: Nessuno e 4 ospiti

cron