<BR>
<BR>dove pero´ gli "errors:19" continuano ad aumentare piu´ navigo in internet. Io ho una connessione fastweb e quidi tramite DHCP. Secondo voi ho configurato male qualche cosa? e se si´ cosa posso fare (in win la connessione risulta molto piu´ rapida).<BR>eth0 Link encap:Ethernet HWaddr 00:80:AD:76:B7:4E
<BR> inet addr:1.50.106.33 Bcast:1.50.106.255 Mask:255.255.255.0
<BR> UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
<BR> RX packets:74 errors:19 dropped:0 overruns:0 frame:0
<BR> TX packets:78 errors:1 dropped:0 overruns:1 carrier:0
<BR> collisions:5
<BR> RX bytes:23370 (22.8 Kb) TX bytes:9352 (9.1 Kb)
<BR>
<BR>
<BR>
<BR>Il mio file /etc/rc.d/rc.inet1.conf e´
<BR>
<BR><BR># /etc/rc.d/rc.inet1.conf
<BR>#
<BR># This file contains the configuration settings for network interfaces.
<BR># If USE_DHCP[interface] is set to "yes", this overrides any other settings.
<BR># If you don´t have an interface, leave the settings null ("").
<BR>
<BR># Config information for eth0:
<BR>IPADDR[0]=""
<BR>NETMASK[0]=""
<BR>USE_DHCP[0]="yes"
<BR>DHCP_HOSTNAME[0]=""
<BR>
<BR># Default gateway IP address:
<BR>GATEWAY="213.140.2.12"
<BR>
<BR># Change this to "yes" for debugging output to stdout. Unfortunately,
<BR># /sbin/hotplug seems to disable stdout so you´ll only see debugging output
<BR># when rc.inet1 is called directly.
<BR>DEBUG_ETH_UP="no"
<BR>
<BR>mentre il file /etc/dhcpd.conf (e idem per /etc/dhclient.conf)
<BR>
<BR># dhcpd.conf
<BR>#
<BR># Configuration file for ISC dhcpd (see ´man dhcpd.conf´)
<BR>#
<BR>default-lease-time 600;
<BR>max-lease-time 7200;
<BR>option subnet-mask 255.255.255.0;
<BR>option domain-name-servers 213.140.2.12, 213.140.2.21;
<BR>option domain-name fastwebnet.it;
<BR>
<BR>(sugli indirizzi sono certo che sono giusti)<br>