Repository 32bit  Forum
Repository 64bit  Wiki

Dell XPS M1530, touchpad e tastiera multimediale

Scrivete su questo forum se avete problemi o volete dare buoni consigli sui computer portatili (Laptop).

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Citare il modello preciso del laptop in questione.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Vito » gio set 18, 2008 18:58

Non riesco a capire come configurare il touchpad su questo portatile....

vi posto i dispositivi di input:

Codice: Seleziona tutto
[vito@Freedom:~]$ cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/virtual/input/input1
U: Uniq=
H: Handlers=event1
B: EV=21
B: SW=1

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/virtual/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=4000 0 0 0 0

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0

I: Bus=0003 Vendor=05a9 Product=2640 Version=0100
N: Name="Laptop Integrated Webcam"
P: Phys=usb-0000:00:1a.7-1
S: Sysfs=/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input5
U: Uniq=
H: Handlers=event5
B: EV=3
B: KEY=1 0 0 0 0 0 0 0 0

I: Bus=0003 Vendor=413c Product=3012 Version=0111
N: Name="Dell Dell USB Optical Mouse"
P: Phys=usb-0000:00:1d.1-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input6
U: Uniq=
H: Handlers=mouse0 event6
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10

I: Bus=0003 Vendor=0a5c Product=4502 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1d.2-2.2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input7
U: Uniq=
H: Handlers=kbd event7
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf f3cfffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=0a5c Product=4503 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1d.2-2.3/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input8
U: Uniq=
H: Handlers=mouse1 event8
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
B: MSC=10



inoltre dmesg mi dà degli errori penso sempre relativi al touchpad:

Codice: Seleziona tutto
[vito@Freedom:~]$ dmesg
isa0060/serio0. Some program might be trying access hardware directly.
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input16
psmouse.c: Failed to enable mouse on isa0060/serio1
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - bad parity
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - bad parity


Sapreste darmi una mano?
Ultima modifica di Vito il ven set 19, 2008 11:58, modificato 1 volta in totale.
"Stat rosa pristina nomina, nomina nuda tenemus." [ Umberto Eco - Il nome della rosa]

"Faber est suae quisque fortunae ." [ Appio Claudio Cieco]
Avatar utente
Vito
Staff
Staff
 
Messaggi: 4133
Iscritto il: mar dic 05, 2006 17:28
Località: Augsburg (DE)
Nome Cognome: Vito
Slackware: 64 14.0 multilib
Kernel: 3.2.29-xps
Desktop: KDE 4.10.2
Distribuzione: Linux Mint 17

Re: Dell XPS M1530 e touchpad

Messaggioda Bruffandino » gio set 18, 2008 20:41

ho lo stesso portatile.. ti posto il mio xorg.conf:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder57) Tue Aug 19 21:14:40 PDT 2008

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Dec 13 19:09:35 PST 2007
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed
# this out to me. :)
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# Some examples of extended input devices
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
#Section "ServerFlags"
# Option "Xinerama" "1"
# EndSection

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
# Screen 1 "Screen1" Above "Screen0"
Identifier "Simple Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Mouse2" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "AIGLX" "true"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
# ModulePath "/usr/lib/xorg/modules"
RgbPath "/usr/share/X11/rgb"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/cyrillic/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
Load "dbe" # Double buffer extension
# SubSection "extmod"
# Option "omit xfree86-dga" # don't initialise the DGA extension
# EndSubSection
Load "type1"
Load "freetype"
Load "synaptics"
#Load "speedo"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Set the keyboard auto repeat parameters. Not all platforms implement
# this.
# Option "AutoRepeat" "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a European
# keyboard, you will probably want to use one of:
#
# Option "XkbModel" "pc102"
# Option "XkbModel" "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
# Option "XkbModel" "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
# Option "XkbModel" "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
# Option "XkbLayout" "de"
#
# or:
#
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for X.Org
#
# Option "XkbRules" "xorg"
# Option "XkbOptions" ""
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
# Option "XkbVariant" ""
EndSection

Section "InputDevice"

# Identifier and driver
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
# Option "Protocol" "Auto"
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
# Option "Device" "/dev/ttyS0"
# Option "Device" "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
# Option "Name" "Logitech USB Receiver"
# Option "Protocol" "auto-dev"
# Option "device" "/dev/input/by-id/usb-Logitech_USB_Receiver-mouse"
# Option "Name" "USB Receiver"
Identifier "Mouse1"
Driver "mouse"
Option "device" "/dev/input/mice"
# Option "HWHEELRelativeAxisButtons" "7 6"
EndSection

Section "InputDevice"
Identifier "Mouse2"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "180"
Option "MinTapTime" "110"
Option "ClickTime" "0"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.55"
Option "MaxSpeed" "0.95"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "0"
Option "VertEdgeScroll" "on"
Option "SHMConfig" "true"
EndSection


Section "Monitor"

#DisplaySize 507 317
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG F700P"
HorizSync 30.0 - 96.0
VertRefresh 50.0 - 160.0
EndSection



Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GT"
Option "UseEDIDDpi" "False"
Option "DPI" "72 x 72"
BusID "PCI:1:0:0"
Screen 0
EndSection

Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GT"
Option "UseEDIDDpi" "FALSE"
Option "DPI" "92 x 92"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Screen"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
# DefaultDepth 8
# DefaultDepth 16
# "1024x768" is also a conservative usable default resolution. If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
Identifier "Screen 1"
Device "Videocard1"
Monitor "Monitor0"
DefaultDepth 24
Option "nologo"
#Option "BackingStore" "True"
Option "TwinView" "0"
Option "metamodes" "CRT: 1280x960 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "DFP: 1440x900 +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "nologo"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "BackingStore" "True"
Option "TripleBuffer" "True"
Option "OnDemandVBlankInterrupts" "True"
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "CRT: 1280x960 +1440+0, DFP: 1440x900 +0+0"
Option "UseEDIDDpi" "DFP"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection
Avatar utente
Bruffandino
Linux 2.0
Linux 2.0
 
Messaggi: 183
Iscritto il: mer nov 24, 2004 0:00
Slackware: 12.2
Kernel: 2.6.28
Desktop: KDE 3.5.10

Re: Dell XPS M1530 e touchpad

Messaggioda Vito » ven set 19, 2008 10:29

Già che ti trovi ti posso chiedere se e come hai configurato i tasti multimediali??
"Stat rosa pristina nomina, nomina nuda tenemus." [ Umberto Eco - Il nome della rosa]

"Faber est suae quisque fortunae ." [ Appio Claudio Cieco]
Avatar utente
Vito
Staff
Staff
 
Messaggi: 4133
Iscritto il: mar dic 05, 2006 17:28
Località: Augsburg (DE)
Nome Cognome: Vito
Slackware: 64 14.0 multilib
Kernel: 3.2.29-xps
Desktop: KDE 4.10.2
Distribuzione: Linux Mint 17

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Bruffandino » ven set 19, 2008 12:42

Si.. prima ho mappato alcuni tasti che non erano mappati:

setkeycodes e00a 200
setkeycodes e011 236
setkeycodes e012 178


poi ho impostato le azioni tramite xbindkeys:

"amixer sset Master 1+"
XF86AudioRaiseVolume
"amixer sset Master 1-"
XF86AudioLowerVolume
"amixer sset Master toggle"
XF86AudioMute
"sudo /usr/local/bin/hibernate"
XF86Sleep
Avatar utente
Bruffandino
Linux 2.0
Linux 2.0
 
Messaggi: 183
Iscritto il: mer nov 24, 2004 0:00
Slackware: 12.2
Kernel: 2.6.28
Desktop: KDE 3.5.10

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Vito » ven set 19, 2008 15:25

Codice: Seleziona tutto
[vito@Freedom:~]$ setkeycodes e012 176
KDSETKEYCODE: Operation not permitted
failed to set scancode 92 to keycode 176


Non capisco come mappare i caratteri.....


inoltre il touchpad non funziona correttamente...

posto il mio xorg.conf :

Codice: Seleziona tutto
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder57)  Thu Jul 17 18:39:19 PDT 2008

# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. :)
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# Some examples of extended input devices
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    Identifier     "Simple Layout"
    Screen         "Screen 1" 0 0
    InputDevice "Mouse1" "SendCoreEvents"
    InputDevice "Mouse2" "CorePointer"
    InputDevice    "Keyboard1" "CoreKeyboard"
    Option         "AIGLX" "true"
EndSection

Section "Files"




# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
#    ModulePath "/usr/lib/xorg/modules"
    RgbPath         "/usr/share/X11/rgb"
    FontPath        "/usr/share/fonts/local/"
    FontPath        "/usr/share/fonts/misc/"
    FontPath        "/usr/share/fonts/OTF/"
    FontPath        "/usr/share/fonts/TTF/"
    FontPath        "/usr/share/fonts/Type1/"
    FontPath        "/usr/share/fonts/CID/"
    FontPath        "/usr/share/fonts/Speedo/"
    FontPath        "/usr/share/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/75dpi/"
    FontPath        "/usr/share/fonts/100dpi/"
    FontPath        "/usr/share/fonts/cyrillic/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
    Load           "dbe"     # Double buffer extension
    SubSection     "extmod"
        Option         "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load           "type1"
    Load           "freetype"
    #Load        "speedo"
    Load           "glx"
    Load           "synaptics"
EndSection


Section "InputDevice"
Identifier "Mouse2"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "180"
Option "MinTapTime" "110"
Option "ClickTime" "0"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.55"
Option "MaxSpeed" "0.95"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "0"
Option "VertEdgeScroll" "on"
Option "SHMConfig" "true"
EndSection
   
Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.
#    Option     "AutoRepeat"    "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
#    Option     "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#    Option     "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"
# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
    Option     "XkbModel"      "pc105"
    Option     "XkbLayout"     "it"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""
    Identifier     "Keyboard1"
    Driver         "kbd"
EndSection

Section "InputDevice"

# Identifier and driver
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
#    Option     "Protocol"      "Auto"
# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol"   "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"      "9600"
#    Option "SampleRate"   "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
    Identifier     "Mouse1"
    Driver         "mouse"
    Option         "Protocol" "IMPS/2"
# The mouse device.  The device is normally set to /dev/mouse,
    Option         "Device" "/dev/input/mice"
#   Option "Device"      "/dev/psaux"
#    Option         "Buttons" "7"
#    Option         "ZAxisMapping" "6 7"
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync   30-64         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier     "My Monitor"
    HorizSync       31.5 - 50.0
    VertRefresh     40.0 - 90.0
EndSection

Section "Device"

    #VideoRam    4096
    # Insert Clocks lines here if appropriate
    Identifier     "VESA Framebuffer"
    Driver         "nvidia"
EndSection

Section "Screen"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
#   DefaultDepth 8
#   DefaultDepth 16
#   DefaultDepth 32
# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
    Identifier     "Screen 1"
    Device         "VESA Framebuffer"
    Monitor        "My Monitor"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "true"
    Option         "AllowGLXWithCompisite" "true"
    Option         "TripleBuffer" "true"
    Option         "RenderAccel" "true"
    Option         "DisableGLXRootClipping" "true"
    Option         "XAANoOffscreenPixmaps" "true"
    SubSection     "Display"
        Depth       8
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1024x768" "800x600" "640x480" "1680x1050"
    EndSubSection
    SubSection     "Display"
        Depth       32
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "enable"
EndSection

"Stat rosa pristina nomina, nomina nuda tenemus." [ Umberto Eco - Il nome della rosa]

"Faber est suae quisque fortunae ." [ Appio Claudio Cieco]
Avatar utente
Vito
Staff
Staff
 
Messaggi: 4133
Iscritto il: mar dic 05, 2006 17:28
Località: Augsburg (DE)
Nome Cognome: Vito
Slackware: 64 14.0 multilib
Kernel: 3.2.29-xps
Desktop: KDE 4.10.2
Distribuzione: Linux Mint 17

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Bruffandino » ven set 19, 2008 17:40

Vito ha scritto:
Codice: Seleziona tutto
[vito@Freedom:~]$ setkeycodes e012 176
KDSETKEYCODE: Operation not permitted
failed to set scancode 92 to keycode 176


Non capisco come mappare i caratteri.....

[/code]


Ehm... prova da root magari..
Avatar utente
Bruffandino
Linux 2.0
Linux 2.0
 
Messaggi: 183
Iscritto il: mer nov 24, 2004 0:00
Slackware: 12.2
Kernel: 2.6.28
Desktop: KDE 3.5.10

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Vito » ven set 19, 2008 17:52

Bruffandino ha scritto:
Vito ha scritto:
Codice: Seleziona tutto
[vito@Freedom:~]$ setkeycodes e012 176
KDSETKEYCODE: Operation not permitted
failed to set scancode 92 to keycode 176


Non capisco come mappare i caratteri.....

[/code]


Ehm... prova da root magari..


ok da root li mappa... ma non capisco il metodo.. hai seguito una guida?
"Stat rosa pristina nomina, nomina nuda tenemus." [ Umberto Eco - Il nome della rosa]

"Faber est suae quisque fortunae ." [ Appio Claudio Cieco]
Avatar utente
Vito
Staff
Staff
 
Messaggi: 4133
Iscritto il: mar dic 05, 2006 17:28
Località: Augsburg (DE)
Nome Cognome: Vito
Slackware: 64 14.0 multilib
Kernel: 3.2.29-xps
Desktop: KDE 4.10.2
Distribuzione: Linux Mint 17

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Vito » ven set 19, 2008 18:58

Per quanto riguarda il touchpad..posto il log di X:

Codice: Seleziona tutto

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Slackware 12.1 Slackware Linux Project
Current Operating System: Linux Freedom 2.6.24.7-smp #2 SMP PREEMPT Tue Sep 16 17:43:55 CEST 2008 i686
Build Date: 30 June 2008  11:57:32PM
 
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 19 19:53:36 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "VESA Framebuffer"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Mouse2"
(**) |-->Input Device "Keyboard1"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID/" does not exist.
   Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/TTF,/usr/share/fonts/OTF,/usr/share/fonts/Type1,/usr/share/fonts/misc,/usr/share/fonts/75dpi/:unscaled.
(**) FontPath set to:
   /usr/share/fonts/misc/,
   /usr/share/fonts/OTF/,
   /usr/share/fonts/TTF/,
   /usr/share/fonts/Type1/,
   /usr/share/fonts/Speedo/,
   /usr/share/fonts/75dpi/:unscaled,
   /usr/share/fonts/100dpi/:unscaled,
   /usr/share/fonts/75dpi/,
   /usr/share/fonts/100dpi/,
   /usr/share/fonts/cyrillic/,
   /usr/share/fonts/TTF,
   /usr/share/fonts/OTF,
   /usr/share/fonts/Type1,
   /usr/share/fonts/misc,
   /usr/share/fonts/75dpi/:unscaled
(**) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d0280
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.3
   X.Org Video Driver: 2.0
   X.Org XInput driver : 2.0
   X.Org Server Extension : 0.3
   X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
   compiled for 1.4.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 1028,022e rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:1a:0: chip 8086,2834 card 1028,022e rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 1028,022e rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 1028,022e rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 1028,022e rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 1028,022e rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 1028,022e rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 1028,022e rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 1028,022e rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2815 card 1028,022e rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 1028,022e rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 1028,022e rev 02 class 01,06,01 hdr 00
(II) PCI: 00:1f:3: chip 8086,283e card 1028,022e rev 02 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0407 card 1028,022e rev a1 class 03,00,00 hdr 00
(II) PCI: 03:09:0: chip 1180,0832 card 1028,022e rev 05 class 0c,00,10 hdr 80
(II) PCI: 03:09:1: chip 1180,0822 card 1028,022e rev 22 class 08,05,01 hdr 80
(II) PCI: 03:09:2: chip 1180,0592 card 1028,022e rev 12 class 08,80,00 hdr 80
(II) PCI: 03:09:3: chip 1180,0852 card 1028,022e rev 12 class 08,80,00 hdr 80
(II) PCI: 09:00:0: chip 11ab,4354 card 1028,022e rev 12 class 02,00,00 hdr 00
(II) PCI: 0b:00:0: chip 8086,4229 card 8086,1121 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,12), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001a (VGA_EN is set)
(II) Bus 1 I/O range:
   [0] -1   0   0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
   [0] -1   0   0xfa000000 - 0xfeafffff (0x4b00000) MX[B]
(II) Bus 1 prefetchable memory range:
   [0] -1   0   0xe0000000 - 0xefffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 9: bridge is at (0:28:0), (0,9,9), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 9 I/O range:
   [0] -1   0   0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 9 non-prefetchable memory range:
   [0] -1   0   0xf9f00000 - 0xf9ffffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 11: bridge is at (0:28:1), (0,11,11), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 11 non-prefetchable memory range:
   [0] -1   0   0xf9e00000 - 0xf9efffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 12: bridge is at (0:28:4), (0,12,13), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 12 I/O range:
   [0] -1   0   0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 12 non-prefetchable memory range:
   [0] -1   0   0xf9c00000 - 0xf9dfffff (0x200000) MX[B]
(II) Bus 12 prefetchable memory range:
   [0] -1   0   0xf0000000 - 0xf01fffff (0x200000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
   [0] -1   0   0xf9b00000 - 0xf9bfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation GeForce 8600M GT rev 161, Mem @ 0xfd000000/24, 0xe0000000/28, 0xfa000000/25, I/O @ 0xef00/7
(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
   [0] -1   0   0xf9efe000 - 0xf9efffff (0x2000) MX[B]
   [1] -1   0   0xf9ffc000 - 0xf9ffffff (0x4000) MX[B]
   [2] -1   0   0xf9bff700 - 0xf9bff7ff (0x100) MX[B]
   [3] -1   0   0xf9bff600 - 0xf9bff6ff (0x100) MX[B]
   [4] -1   0   0xf9bff500 - 0xf9bff5ff (0x100) MX[B]
   [5] -1   0   0xf9bff800 - 0xf9bfffff (0x800) MX[B]
   [6] -1   0   0xfebfb700 - 0xfebfb7ff (0x100) MX[B]
   [7] -1   0   0xfebfb800 - 0xfebfbfff (0x800) MX[B]
   [8] -1   0   0xfed1c000 - 0xfed1c3ff (0x400) MX[B]
   [9] -1   0   0xfebfc000 - 0xfebfffff (0x4000) MX[B]
   [10] -1   0   0xfed1c400 - 0xfed1c7ff (0x400) MX[B]
   [11] -1   0   0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
   [12] -1   0   0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
   [13] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [14] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [15] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [16] -1   0   0x00006ee0 - 0x00006eff (0x20) IX[B]
   [17] -1   0   0x00006ec8 - 0x00006ecb (0x4) IX[B]
   [18] -1   0   0x00006ec0 - 0x00006ec7 (0x8) IX[B]
   [19] -1   0   0x00006eb8 - 0x00006ebb (0x4) IX[B]
   [20] -1   0   0x00006eb0 - 0x00006eb7 (0x8) IX[B]
   [21] -1   0   0x00006fa0 - 0x00006faf (0x10) IX[B]
   [22] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [23] -1   0   0x00000170 - 0x00000177 (0x8) IX[B]
   [24] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [25] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [26] -1   0   0x00006f40 - 0x00006f5f (0x20) IX[B]
   [27] -1   0   0x00006f60 - 0x00006f7f (0x20) IX[B]
   [28] -1   0   0x00006f80 - 0x00006f9f (0x20) IX[B]
   [29] -1   0   0x00006f00 - 0x00006f1f (0x20) IX[B]
   [30] -1   0   0x00006f20 - 0x00006f3f (0x20) IX[B]
   [31] -1   0   0x0000ef00 - 0x0000ef7f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
   [0] -1   0   0xf9efe000 - 0xf9efffff (0x2000) MX[B]
   [1] -1   0   0xf9ffc000 - 0xf9ffffff (0x4000) MX[B]
   [2] -1   0   0xf9bff700 - 0xf9bff7ff (0x100) MX[B]
   [3] -1   0   0xf9bff600 - 0xf9bff6ff (0x100) MX[B]
   [4] -1   0   0xf9bff500 - 0xf9bff5ff (0x100) MX[B]
   [5] -1   0   0xf9bff800 - 0xf9bfffff (0x800) MX[B]
   [6] -1   0   0xfebfb700 - 0xfebfb7ff (0x100) MX[B]
   [7] -1   0   0xfebfb800 - 0xfebfbfff (0x800) MX[B]
   [8] -1   0   0xfed1c000 - 0xfed1c3ff (0x400) MX[B]
   [9] -1   0   0xfebfc000 - 0xfebfffff (0x4000) MX[B]
   [10] -1   0   0xfed1c400 - 0xfed1c7ff (0x400) MX[B]
   [11] -1   0   0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
   [12] -1   0   0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
   [13] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [14] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [15] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [16] -1   0   0x00006ee0 - 0x00006eff (0x20) IX[B]
   [17] -1   0   0x00006ec8 - 0x00006ecb (0x4) IX[B]
   [18] -1   0   0x00006ec0 - 0x00006ec7 (0x8) IX[B]
   [19] -1   0   0x00006eb8 - 0x00006ebb (0x4) IX[B]
   [20] -1   0   0x00006eb0 - 0x00006eb7 (0x8) IX[B]
   [21] -1   0   0x00006fa0 - 0x00006faf (0x10) IX[B]
   [22] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [23] -1   0   0x00000170 - 0x00000177 (0x8) IX[B]
   [24] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [25] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [26] -1   0   0x00006f40 - 0x00006f5f (0x20) IX[B]
   [27] -1   0   0x00006f60 - 0x00006f7f (0x20) IX[B]
   [28] -1   0   0x00006f80 - 0x00006f9f (0x20) IX[B]
   [29] -1   0   0x00006f00 - 0x00006f1f (0x20) IX[B]
   [30] -1   0   0x00006f20 - 0x00006f3f (0x20) IX[B]
   [31] -1   0   0x0000ef00 - 0x0000ef7f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xf9efe000 - 0xf9efffff (0x2000) MX[B]
   [5] -1   0   0xf9ffc000 - 0xf9ffffff (0x4000) MX[B]
   [6] -1   0   0xf9bff700 - 0xf9bff7ff (0x100) MX[B]
   [7] -1   0   0xf9bff600 - 0xf9bff6ff (0x100) MX[B]
   [8] -1   0   0xf9bff500 - 0xf9bff5ff (0x100) MX[B]
   [9] -1   0   0xf9bff800 - 0xf9bfffff (0x800) MX[B]
   [10] -1   0   0xfebfb700 - 0xfebfb7ff (0x100) MX[B]
   [11] -1   0   0xfebfb800 - 0xfebfbfff (0x800) MX[B]
   [12] -1   0   0xfed1c000 - 0xfed1c3ff (0x400) MX[B]
   [13] -1   0   0xfebfc000 - 0xfebfffff (0x4000) MX[B]
   [14] -1   0   0xfed1c400 - 0xfed1c7ff (0x400) MX[B]
   [15] -1   0   0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
   [16] -1   0   0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
   [17] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [18] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [19] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [20] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [21] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [22] -1   0   0x00006ee0 - 0x00006eff (0x20) IX[B]
   [23] -1   0   0x00006ec8 - 0x00006ecb (0x4) IX[B]
   [24] -1   0   0x00006ec0 - 0x00006ec7 (0x8) IX[B]
   [25] -1   0   0x00006eb8 - 0x00006ebb (0x4) IX[B]
   [26] -1   0   0x00006eb0 - 0x00006eb7 (0x8) IX[B]
   [27] -1   0   0x00006fa0 - 0x00006faf (0x10) IX[B]
   [28] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [29] -1   0   0x00000170 - 0x00000177 (0x8) IX[B]
   [30] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [31] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [32] -1   0   0x00006f40 - 0x00006f5f (0x20) IX[B]
   [33] -1   0   0x00006f60 - 0x00006f7f (0x20) IX[B]
   [34] -1   0   0x00006f80 - 0x00006f9f (0x20) IX[B]
   [35] -1   0   0x00006f00 - 0x00006f1f (0x20) IX[B]
   [36] -1   0   0x00006f20 - 0x00006f3f (0x20) IX[B]
   [37] -1   0   0x0000ef00 - 0x0000ef7f (0x80) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.4.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.4.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
   compiled for 1.4.2, module version = 1.0.2
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
   compiled for 1.4.2, module version = 2.1.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Server Extension
(II) NVIDIA GLX Module  173.14.12  Thu Jul 17 18:36:35 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
   compiled for 4.3.99.902, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.4.2, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 1.4.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 1.4.0.90, module version = 1.3.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
   compiled for 1.4.0, module version = 1.2.2
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver  173.14.12  Thu Jul 17 18:15:54 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.4.2, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
   compiled for 1.4.2, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xf9efe000 - 0xf9efffff (0x2000) MX[B]
   [5] -1   0   0xf9ffc000 - 0xf9ffffff (0x4000) MX[B]
   [6] -1   0   0xf9bff700 - 0xf9bff7ff (0x100) MX[B]
   [7] -1   0   0xf9bff600 - 0xf9bff6ff (0x100) MX[B]
   [8] -1   0   0xf9bff500 - 0xf9bff5ff (0x100) MX[B]
   [9] -1   0   0xf9bff800 - 0xf9bfffff (0x800) MX[B]
   [10] -1   0   0xfebfb700 - 0xfebfb7ff (0x100) MX[B]
   [11] -1   0   0xfebfb800 - 0xfebfbfff (0x800) MX[B]
   [12] -1   0   0xfed1c000 - 0xfed1c3ff (0x400) MX[B]
   [13] -1   0   0xfebfc000 - 0xfebfffff (0x4000) MX[B]
   [14] -1   0   0xfed1c400 - 0xfed1c7ff (0x400) MX[B]
   [15] -1   0   0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
   [16] -1   0   0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
   [17] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [18] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [19] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [20] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [21] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [22] -1   0   0x00006ee0 - 0x00006eff (0x20) IX[B]
   [23] -1   0   0x00006ec8 - 0x00006ecb (0x4) IX[B]
   [24] -1   0   0x00006ec0 - 0x00006ec7 (0x8) IX[B]
   [25] -1   0   0x00006eb8 - 0x00006ebb (0x4) IX[B]
   [26] -1   0   0x00006eb0 - 0x00006eb7 (0x8) IX[B]
   [27] -1   0   0x00006fa0 - 0x00006faf (0x10) IX[B]
   [28] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [29] -1   0   0x00000170 - 0x00000177 (0x8) IX[B]
   [30] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [31] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [32] -1   0   0x00006f40 - 0x00006f5f (0x20) IX[B]
   [33] -1   0   0x00006f60 - 0x00006f7f (0x20) IX[B]
   [34] -1   0   0x00006f80 - 0x00006f9f (0x20) IX[B]
   [35] -1   0   0x00006f00 - 0x00006f1f (0x20) IX[B]
   [36] -1   0   0x00006f20 - 0x00006f3f (0x20) IX[B]
   [37] -1   0   0x0000ef00 - 0x0000ef7f (0x80) IX[B](B)
(II) resource ranges after probing:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xf9efe000 - 0xf9efffff (0x2000) MX[B]
   [5] -1   0   0xf9ffc000 - 0xf9ffffff (0x4000) MX[B]
   [6] -1   0   0xf9bff700 - 0xf9bff7ff (0x100) MX[B]
   [7] -1   0   0xf9bff600 - 0xf9bff6ff (0x100) MX[B]
   [8] -1   0   0xf9bff500 - 0xf9bff5ff (0x100) MX[B]
   [9] -1   0   0xf9bff800 - 0xf9bfffff (0x800) MX[B]
   [10] -1   0   0xfebfb700 - 0xfebfb7ff (0x100) MX[B]
   [11] -1   0   0xfebfb800 - 0xfebfbfff (0x800) MX[B]
   [12] -1   0   0xfed1c000 - 0xfed1c3ff (0x400) MX[B]
   [13] -1   0   0xfebfc000 - 0xfebfffff (0x4000) MX[B]
   [14] -1   0   0xfed1c400 - 0xfed1c7ff (0x400) MX[B]
   [15] -1   0   0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
   [16] -1   0   0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
   [17] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [18] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [19] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [20] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [21] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [22] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [23] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [24] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [25] -1   0   0x00006ee0 - 0x00006eff (0x20) IX[B]
   [26] -1   0   0x00006ec8 - 0x00006ecb (0x4) IX[B]
   [27] -1   0   0x00006ec0 - 0x00006ec7 (0x8) IX[B]
   [28] -1   0   0x00006eb8 - 0x00006ebb (0x4) IX[B]
   [29] -1   0   0x00006eb0 - 0x00006eb7 (0x8) IX[B]
   [30] -1   0   0x00006fa0 - 0x00006faf (0x10) IX[B]
   [31] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [32] -1   0   0x00000170 - 0x00000177 (0x8) IX[B]
   [33] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [34] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [35] -1   0   0x00006f40 - 0x00006f5f (0x20) IX[B]
   [36] -1   0   0x00006f60 - 0x00006f7f (0x20) IX[B]
   [37] -1   0   0x00006f80 - 0x00006f9f (0x20) IX[B]
   [38] -1   0   0x00006f00 - 0x00006f1f (0x20) IX[B]
   [39] -1   0   0x00006f20 - 0x00006f3f (0x20) IX[B]
   [40] -1   0   0x0000ef00 - 0x0000ef7f (0x80) IX[B](B)
   [41] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [42] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "TripleBuffer" "true"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Option "DisableGLXRootClipping" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8600M GT (G84) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.84.5e.00.08
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8600M GT at PCI:1:0:0:
(--) NVIDIA(0):     LPL (DFP-0)
(--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1024x768"
(II) NVIDIA(0):     "800x600"
(II) NVIDIA(0):     "640x480"
(II) NVIDIA(0):     "1680x1050"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (78, 92); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xf9efe000 - 0xf9efffff (0x2000) MX[B]
   [5] -1   0   0xf9ffc000 - 0xf9ffffff (0x4000) MX[B]
   [6] -1   0   0xf9bff700 - 0xf9bff7ff (0x100) MX[B]
   [7] -1   0   0xf9bff600 - 0xf9bff6ff (0x100) MX[B]
   [8] -1   0   0xf9bff500 - 0xf9bff5ff (0x100) MX[B]
   [9] -1   0   0xf9bff800 - 0xf9bfffff (0x800) MX[B]
   [10] -1   0   0xfebfb700 - 0xfebfb7ff (0x100) MX[B]
   [11] -1   0   0xfebfb800 - 0xfebfbfff (0x800) MX[B]
   [12] -1   0   0xfed1c000 - 0xfed1c3ff (0x400) MX[B]
   [13] -1   0   0xfebfc000 - 0xfebfffff (0x4000) MX[B]
   [14] -1   0   0xfed1c400 - 0xfed1c7ff (0x400) MX[B]
   [15] -1   0   0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
   [16] -1   0   0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
   [17] -1   0   0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
   [18] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [19] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [20] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [21] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [22] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [23] -1   0   0x0000de00 - 0x0000deff (0x100) IX[B]
   [24] -1   0   0x000010c0 - 0x000010df (0x20) IX[B]
   [25] -1   0   0x00006ee0 - 0x00006eff (0x20) IX[B]
   [26] -1   0   0x00006ec8 - 0x00006ecb (0x4) IX[B]
   [27] -1   0   0x00006ec0 - 0x00006ec7 (0x8) IX[B]
   [28] -1   0   0x00006eb8 - 0x00006ebb (0x4) IX[B]
   [29] -1   0   0x00006eb0 - 0x00006eb7 (0x8) IX[B]
   [30] -1   0   0x00006fa0 - 0x00006faf (0x10) IX[B]
   [31] -1   0   0x00000374 - 0x00000374 (0x1) IX[B]
   [32] -1   0   0x00000170 - 0x00000177 (0x8) IX[B]
   [33] -1   0   0x000003f4 - 0x000003f4 (0x1) IX[B]
   [34] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [35] -1   0   0x00006f40 - 0x00006f5f (0x20) IX[B]
   [36] -1   0   0x00006f60 - 0x00006f7f (0x20) IX[B]
   [37] -1   0   0x00006f80 - 0x00006f9f (0x20) IX[B]
   [38] -1   0   0x00006f00 - 0x00006f1f (0x20) IX[B]
   [39] -1   0   0x00006f20 - 0x00006f3f (0x20) IX[B]
   [40] -1   0   0x0000ef00 - 0x0000ef7f (0x80) IX[B](B)
   [41] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [42] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0):     enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(WW) NVIDIA(0): Option "AllowGLXWithCompisite" is not used
(WW) NVIDIA(0): Option "XAANoOffscreenPixmaps" is not used
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Mouse1: Sensitivity: 1
(II) Synaptics touchpad driver version 0.14.6 (1406)
Mouse2 no synaptics event device found (checked 20 nodes)
(**) Option "Device" "/dev/psaux"
(**) Option "SHMConfig" "true"
(**) Option "LeftEdge" "130"
(**) Option "RightEdge" "840"
(**) Option "TopEdge" "130"
(**) Option "BottomEdge" "640"
(**) Option "VertScrollDelta" "20"
(**) Option "HorizScrollDelta" "20"
(**) Option "EdgeMotionMinSpeed" "200"
(**) Option "EdgeMotionMaxSpeed" "200"
(**) Option "FingerLow" "7"
(**) Option "FingerHigh" "8"
(**) Option "MaxTapTime" "180"
(**) Option "ClickTime" "0"
(**) Option "EmulateMidButtonTime" "75"
(**) Option "VertEdgeScroll" "on"
(**) Option "UpDownScrolling" "1"
(**) Option "CircularScrolling" "0"
Query no Synaptics: 6003C8
(EE) Mouse2 no synaptics touchpad detected and no repeater device
(EE) Mouse2 Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "Mouse2"
(II) UnloadModule: "synaptics"
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Keyboard1: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) evaluating device (Keyboard1)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) evaluating device (Mouse1)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) NVIDIA(0): Setting mode "1680x1050"
(II) 3rd Button detected: disabling emulate3Button
1-ISO10646 gb18030.2000-0
1-ISO10646 gb18030.2000-0
1-ISO10646 gb18030.2000-0
"Stat rosa pristina nomina, nomina nuda tenemus." [ Umberto Eco - Il nome della rosa]

"Faber est suae quisque fortunae ." [ Appio Claudio Cieco]
Avatar utente
Vito
Staff
Staff
 
Messaggi: 4133
Iscritto il: mar dic 05, 2006 17:28
Località: Augsburg (DE)
Nome Cognome: Vito
Slackware: 64 14.0 multilib
Kernel: 3.2.29-xps
Desktop: KDE 4.10.2
Distribuzione: Linux Mint 17

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Vito » dom set 21, 2008 18:28

ok per i tasti multimediali ho risolto, ma continuo ad avere problemi col touchpad: in particolare quando avvio una sessione di KDE (sia utente che root),questo smette di funzionare!Da cosa può dipendere?
Posto il mio nuovo Xorg.conf :

Codice: Seleziona tutto
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder57)  Thu Jul 17 18:39:19 PDT 2008

# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. :)
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# Some examples of extended input devices
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    Identifier     "Simple Layout"
    Screen         "Screen 1" 0 0
    InputDevice "Mouse1" "SendCoreEvents"
    InputDevice "Mouse2" "CorePointer"
    InputDevice    "Keyboard1" "CoreKeyboard"
    Option         "AIGLX" "true"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
#    ModulePath "/usr/lib/xorg/modules"
    RgbPath         "/usr/share/X11/rgb"
    FontPath        "/usr/share/fonts/local/"
    FontPath        "/usr/share/fonts/misc/"
    FontPath        "/usr/share/fonts/OTF/"
    FontPath        "/usr/share/fonts/TTF/"
    FontPath        "/usr/share/fonts/Type1/"
    FontPath        "/usr/share/fonts/CID/"
    FontPath        "/usr/share/fonts/Speedo/"
    FontPath        "/usr/share/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/75dpi/"
    FontPath        "/usr/share/fonts/100dpi/"
    FontPath        "/usr/share/fonts/cyrillic/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
    Load           "dbe"     # Double buffer extension
    SubSection     "extmod"
        Option         "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load           "type1"
    Load           "freetype"
    #Load        "speedo"
    Load           "glx"
    Load           "synaptics"
EndSection


Section "InputDevice"
Identifier "Mouse2"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "180"
Option "MinTapTime" "110"
Option "ClickTime" "0"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.55"
Option "MaxSpeed" "0.95"
Option "AccelFactor" "0.030"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "0"
Option "VertEdgeScroll" "on"
Option "SHMConfig" "true"
EndSection
   
Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.
#    Option     "AutoRepeat"    "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
#    Option     "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#    Option     "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"
# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
    Option     "XkbModel"      "pc105"
    Option     "XkbLayout"     "it"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""
    Identifier     "Keyboard1"
    Driver         "kbd"
EndSection

Section "InputDevice"

# Identifier and driver
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
#    Option     "Protocol"      "Auto"
# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol"   "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"      "9600"
#    Option "SampleRate"   "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
    Identifier     "Mouse1"
    Driver         "mouse"
    Option         "Protocol" "IMPS/2"
# The mouse device.  The device is normally set to /dev/mouse,
    Option         "Device" "/dev/input/mice"
#   Option "Device"      "/dev/psaux"
#    Option         "Buttons" "7"
#    Option         "ZAxisMapping" "6 7"
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync   30-64         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier     "My Monitor"
    HorizSync       31.5 - 50.0
    VertRefresh     40.0 - 90.0
EndSection

Section "Device"

    #VideoRam    4096
    # Insert Clocks lines here if appropriate
    Identifier     "VESA Framebuffer"
    Driver         "nvidia"
EndSection

Section "Screen"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
#   DefaultDepth 8
#   DefaultDepth 16
#   DefaultDepth 32
# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
    Identifier     "Screen 1"
    Device         "VESA Framebuffer"
    Monitor        "My Monitor"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "true"
    Option         "AllowGLXWithCompisite" "true"
    Option         "TripleBuffer" "true"
    Option         "RenderAccel" "true"
    Option         "DisableGLXRootClipping" "true"
    Option         "XAANoOffscreenPixmaps" "true"
    SubSection     "Display"
        Depth       8
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1024x768" "800x600" "640x480" "1680x1050"
    EndSubSection
    SubSection     "Display"
        Depth       32
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "enable"
EndSection
"Stat rosa pristina nomina, nomina nuda tenemus." [ Umberto Eco - Il nome della rosa]

"Faber est suae quisque fortunae ." [ Appio Claudio Cieco]
Avatar utente
Vito
Staff
Staff
 
Messaggi: 4133
Iscritto il: mar dic 05, 2006 17:28
Località: Augsburg (DE)
Nome Cognome: Vito
Slackware: 64 14.0 multilib
Kernel: 3.2.29-xps
Desktop: KDE 4.10.2
Distribuzione: Linux Mint 17

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Vito » gio set 25, 2008 22:22

Ho circoscritto il problema al solo KDE 3.5.9 (con XFCE il touchpad funziona!)
"Stat rosa pristina nomina, nomina nuda tenemus." [ Umberto Eco - Il nome della rosa]

"Faber est suae quisque fortunae ." [ Appio Claudio Cieco]
Avatar utente
Vito
Staff
Staff
 
Messaggi: 4133
Iscritto il: mar dic 05, 2006 17:28
Località: Augsburg (DE)
Nome Cognome: Vito
Slackware: 64 14.0 multilib
Kernel: 3.2.29-xps
Desktop: KDE 4.10.2
Distribuzione: Linux Mint 17

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Vito » mer ott 01, 2008 16:26

http://ubuntuforums.org/showthread.php?t=900536

qualche suggerimento???

L'errore è identico a quello postato in quel post!
"Stat rosa pristina nomina, nomina nuda tenemus." [ Umberto Eco - Il nome della rosa]

"Faber est suae quisque fortunae ." [ Appio Claudio Cieco]
Avatar utente
Vito
Staff
Staff
 
Messaggi: 4133
Iscritto il: mar dic 05, 2006 17:28
Località: Augsburg (DE)
Nome Cognome: Vito
Slackware: 64 14.0 multilib
Kernel: 3.2.29-xps
Desktop: KDE 4.10.2
Distribuzione: Linux Mint 17

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Vito » dom ott 05, 2008 17:24

Ho risolto aggiungendo "i8042.nomux=1" al mio lilo.conf.
Lo posto:

Codice: Seleziona tutto
 LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
# Append any additional kernel parameters:
append=" vt.default_utf8=0 i8042.nomux=1 "
boot = /dev/sda7

# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
  bitmap = /boot/slack.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
  bmp-colors = 255,0,255,0,255,0
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), "spill" (this is how many
# entries must be in the first column before the next begins to
# be used.  We don't specify it here, as there's just one column.
  bmp-table = 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
  bmp-timer = 65,27,0,255

# Standard menu.
# Or, you can comment out the bitmap menu above and
# use a boot message with the standard menu:
#message = /boot/boot_message.txt

# Wait until the timeout to boot (if commented out, boot the
# first entry immediately):
prompt
# Timeout before the first entry boots.
# This is given in tenths of a second, so 600 for every minute:
timeout = 1200
# Override dangerous defaults that rewrite the partition table:
change-rules
  reset
# VESA framebuffer console @ 1024x768x256
vga = 773
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# End LILO global section
# Windows bootable partition config begins
#other = /dev/sda1
#  label = Windows
#  table = /dev/sda
# Windows bootable partition config ends
# Linux bootable partition config begins
image = /boot/vmlinuz-2.6.26.5-smp
  root = /dev/sda7
  label = Slack_2.6.26.5
  read-only
# Linux bootable partition config ends

"Stat rosa pristina nomina, nomina nuda tenemus." [ Umberto Eco - Il nome della rosa]

"Faber est suae quisque fortunae ." [ Appio Claudio Cieco]
Avatar utente
Vito
Staff
Staff
 
Messaggi: 4133
Iscritto il: mar dic 05, 2006 17:28
Località: Augsburg (DE)
Nome Cognome: Vito
Slackware: 64 14.0 multilib
Kernel: 3.2.29-xps
Desktop: KDE 4.10.2
Distribuzione: Linux Mint 17

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda aschenaz » lun ott 06, 2008 6:12

=D>
Applauso disinteressato! :^o :p
Come puoi vedere ( viewtopic.php?f=7&t=26153 ), sono anch'io
indirizzato su quel portatile. Così avrò la strada spianata! :lol:
pensieriemotivi.aschenaz.eu - music-blog
Avatar utente
aschenaz
Staff
Staff
 
Messaggi: 4423
Iscritto il: mar lug 27, 2004 23:00
Località: Reggio Calabria
Nome Cognome: Nino
Slackware: current 64bit
Kernel: 3.14.16
Desktop: KDE 4.10.5

Re: Dell XPS M1530, touchpad e tastiera multimediale

Messaggioda Vito » gio ott 09, 2008 17:14

aschenaz ha scritto:=D>
Applauso disinteressato! :^o :p
Come puoi vedere ( viewtopic.php?f=7&t=26153 ), sono anch'io
indirizzato su quel portatile. Così avrò la strada spianata! :lol:

Ti devo dire la verità il portatile per come l'ho configurato adesso è strepitoso! :-p
"Stat rosa pristina nomina, nomina nuda tenemus." [ Umberto Eco - Il nome della rosa]

"Faber est suae quisque fortunae ." [ Appio Claudio Cieco]
Avatar utente
Vito
Staff
Staff
 
Messaggi: 4133
Iscritto il: mar dic 05, 2006 17:28
Località: Augsburg (DE)
Nome Cognome: Vito
Slackware: 64 14.0 multilib
Kernel: 3.2.29-xps
Desktop: KDE 4.10.2
Distribuzione: Linux Mint 17


Torna a Laptop

Chi c’è in linea

Visitano il forum: Nessuno e 1 ospite