problemi con driver ati su slack 12.2

Se avete problemi con l'installazione e la configurazione di Slackware postate qui. Non usate questo forum per argomenti generali... per quelli usate Gnu/Linux in genere.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Luco
Linux 0.x
Linux 0.x
Messaggi: 45
Iscritto il: lun 9 ott 2006, 12:46

problemi con driver ati su slack 12.2

Messaggio da Luco »

ciao a tutti, ho da poco installato slackware 12.2 tutto funziona bene a parte la scheda video (ati mobility 9600).
ho provato ad installare tutte le versioni dei driver presenti sul sito ati ma non riesco a caricare il modulo alla fine..
questo provando con gli ultimi 9.1:

Codice: Seleziona tutto

FATAL: Error inserting fglrx (/lib/modules/2.6.27.7-smp/kernel/drivers/char/drm/fglrx.ko): Unknown symbol in module, or unknown parameter (see dmesg)
ed il dmesg relativo:

Codice: Seleziona tutto

fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
fglrx: Unknown symbol pci_disable_msi
fglrx: Unknown symbol pci_enable_msi
fglrx: Unknown symbol pci_disable_msi
fglrx: Unknown symbol pci_enable_msi
invece con gli 8.12:

Codice: Seleziona tutto

FATAL: Error inserting fglrx (/lib/modules/2.6.27.7-smp/kernel/drivers/char/drm/fglrx.ko): Cannot allocate memory
dmesg:
[fglrx] Maximum main memory to use for locked dma buffers: 923 MBytes.
[fglrx:drm_alloc] *ERROR* [driver] Allocating 0 bytes
[fglrx:firegl_init_device_list] *ERROR* Out of memory when allocating device heads
[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
aticonfig[15619]: segfault at c ip 08053d5d sp bff3bc00 error 6 in aticonfig[8048000+35000]
[fglrx] Maximum main memory to use for locked dma buffers: 923 MBytes.
[fglrx:drm_alloc] *ERROR* [driver] Allocating 0 bytes
[fglrx:firegl_init_device_list] *ERROR* Out of memory when allocating device heads
[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
con tutti i precedenti invece:

Codice: Seleziona tutto

FATAL: Module fglrx not found
ho ricompilato il kernel come suggerito in un thread qui su slacky abilitando in BUS OPTION MESSAGE SIGNALED INTERRUPTS (MSI AND MSI-X), ma la situazione non cambia...
cosa posso fare?
grazie

Luca

Avatar utente
blackman85
Linux 2.x
Linux 2.x
Messaggi: 333
Iscritto il: dom 22 giu 2008, 14:41
Slackware: 13.1 x86_64
Kernel: 2.6.33.4
Desktop: kde 4.4

Re: problemi con driver ati su slack 12.2

Messaggio da blackman85 »

Mi sa che c'è qualche errore di compilazione del kernel.
comunque hai provato ad usare i driver open?
Ciao :thumbright:
Ultima modifica di blackman85 il sab 7 feb 2009, 20:23, modificato 1 volta in totale.

Luco
Linux 0.x
Linux 0.x
Messaggi: 45
Iscritto il: lun 9 ott 2006, 12:46

Re: problemi con driver ati su slack 12.2

Messaggio da Luco »

il kernel e quello di default con la sola aggiunta di quell opzione..

Avatar utente
proffi
Linux 1.x
Linux 1.x
Messaggi: 135
Iscritto il: ven 13 ago 2004, 0:00
Slackware: 13.37
Località: Lunano

Re: problemi con driver ati su slack 12.2

Messaggio da proffi »

Stesso problema e identica scheda video. Ho provato anch'io a ricompilare il kernel con quell'opzione, anche se ho usato un 2.6.28.3 parrtendo dal .config del 2.6.27.7 di default in slackware 12.2 . I catalyst 9.1 continuano a non funzionare.
Sono passato ai driver open, ho il direct rendering ma le prestazioni non sono eccezionali... Alcune applicazioni opengl vanno benone, invece ad esempio google earth 5 è praticamente inutilizzabile.
Ciao

Luco
Linux 0.x
Linux 0.x
Messaggi: 45
Iscritto il: lun 9 ott 2006, 12:46

Re: problemi con driver ati su slack 12.2

Messaggio da Luco »

ho provato con i 9.2 beta proprietari ma niente, e con gli open seguendo tutte le istruzioni sul tuo thread
non riesco a far andare il direct rendering....

Luco
Linux 0.x
Linux 0.x
Messaggi: 45
Iscritto il: lun 9 ott 2006, 12:46

Re: problemi con driver ati su slack 12.2

Messaggio da Luco »

questo e' il log di xorg, non riesco a capire cosa c'e' che non va....

Codice: Seleziona tutto

(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
	ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
	ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
	ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
	ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
	ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x90000000 - 0x9000ffff (0x10000) MX[B]
	[5] -1	0	0x90100000 - 0x90103fff (0x4000) MX[B]
	[6] -1	0	0x90380000 - 0x903807ff (0x800) MX[B]
	[7] -1	0	0x90280000 - 0x90280fff (0x1000) MX[B]
	[8] -1	0	0x90080000 - 0x9008ffff (0x10000) MX[B]
	[9] -1	0	0xa0180000 - 0xa01800ff (0x100) MX[B]
	[10] -1	0	0xa0100000 - 0xa01001ff (0x200) MX[B]
	[11] -1	0	0x5e000000 - 0x5e0003ff (0x400) MX[B]
	[12] -1	0	0xa0000000 - 0xa00003ff (0x400) MX[B]
	[13] -1	0	0xb0000000 - 0xafffffff (0x0) MX[B]O
	[14] -1	0	0x90400000 - 0x9040ffff (0x10000) MX[B](B)
	[15] -1	0	0x98000000 - 0x9fffffff (0x8000000) MX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x00003880 - 0x000038bf (0x40) IX[B]
	[19] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[20] -1	0	0x00001200 - 0x0000121f (0x20) IX[B]
	[21] -1	0	0x00003c20 - 0x00003c2f (0x10) IX[B]
	[22] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[23] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[24] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[26] -1	0	0x00003c00 - 0x00003c1f (0x20) IX[B]
	[27] -1	0	0x000038e0 - 0x000038ff (0x20) IX[B]
	[28] -1	0	0x000038c0 - 0x000038df (0x20) IX[B]
	[29] -1	0	0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x90000000 - 0x9000ffff (0x10000) MX[B]
	[5] -1	0	0x90100000 - 0x90103fff (0x4000) MX[B]
	[6] -1	0	0x90380000 - 0x903807ff (0x800) MX[B]
	[7] -1	0	0x90280000 - 0x90280fff (0x1000) MX[B]
	[8] -1	0	0x90080000 - 0x9008ffff (0x10000) MX[B]
	[9] -1	0	0xa0180000 - 0xa01800ff (0x100) MX[B]
	[10] -1	0	0xa0100000 - 0xa01001ff (0x200) MX[B]
	[11] -1	0	0x5e000000 - 0x5e0003ff (0x400) MX[B]
	[12] -1	0	0xa0000000 - 0xa00003ff (0x400) MX[B]
	[13] -1	0	0xb0000000 - 0xafffffff (0x0) MX[B]O
	[14] -1	0	0x90400000 - 0x9040ffff (0x10000) MX[B](B)
	[15] -1	0	0x98000000 - 0x9fffffff (0x8000000) MX[B](B)
	[16] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[17] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[18] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] -1	0	0x00003880 - 0x000038bf (0x40) IX[B]
	[22] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[23] -1	0	0x00001200 - 0x0000121f (0x20) IX[B]
	[24] -1	0	0x00003c20 - 0x00003c2f (0x10) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[26] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[27] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[28] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[29] -1	0	0x00003c00 - 0x00003c1f (0x20) IX[B]
	[30] -1	0	0x000038e0 - 0x000038ff (0x20) IX[B]
	[31] -1	0	0x000038c0 - 0x000038df (0x20) IX[B]
	[32] -1	0	0x00002000 - 0x000020ff (0x100) IX[B](B)
	[33] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[34] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x0000000090400000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "RenderAccel" "on"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
(--) RADEON(0): Linear framebuffer at 0x0000000098000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 20200, sclk: 202.000000, mclk: 344.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=20200
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Bios Connector table: 
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-3
(II) RADEON(0): Port4: DDCType-0x6c, DACType-0, TMDSType-0, ConnectorType-7
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section Monitor1
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Panel ID string: HSD                     
(II) RADEON(0): Panel Size from BIOS: 1600x1200
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1600, YRes: 1200, DotClock: 162000
HBlank: 560, HOverPlus: 64, HSyncWidth: 192
VBlank: 50, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC 
(II) RADEON(0): Port0:
 Monitor   -- AUTO
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- None
 DDC Type  -- 0x60
(II) RADEON(0): Port1:
 Monitor   -- AUTO
 Connector -- DVI-D
 DAC Type  -- None
 TMDS Type -- Internal
 DDC Type  -- 0x64
(II) RADEON(0): Port2:
 Monitor   -- AUTO
 Connector -- LVDS
 DAC Type  -- None
 TMDS Type -- None
 DDC Type  -- 0x6c
(II) RADEON(0): Port3:
 Monitor   -- AUTO
 Connector -- STV
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- None
 DDC Type  -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 3
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1600x1200
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output LVDS using initial mode 1600x1200
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(**) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 2.2.0
	ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0x90400000 - 0x9040ffff (0x10000) MX[B]
	[1] 0	0	0x98000000 - 0x9fffffff (0x8000000) MX[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0x90000000 - 0x9000ffff (0x10000) MX[B]
	[7] -1	0	0x90100000 - 0x90103fff (0x4000) MX[B]
	[8] -1	0	0x90380000 - 0x903807ff (0x800) MX[B]
	[9] -1	0	0x90280000 - 0x90280fff (0x1000) MX[B]
	[10] -1	0	0x90080000 - 0x9008ffff (0x10000) MX[B]
	[11] -1	0	0xa0180000 - 0xa01800ff (0x100) MX[B]
	[12] -1	0	0xa0100000 - 0xa01001ff (0x200) MX[B]
	[13] -1	0	0x5e000000 - 0x5e0003ff (0x400) MX[B]
	[14] -1	0	0xa0000000 - 0xa00003ff (0x400) MX[B]
	[15] -1	0	0xb0000000 - 0xafffffff (0x0) MX[B]O
	[16] -1	0	0x90400000 - 0x9040ffff (0x10000) MX[B](B)
	[17] -1	0	0x98000000 - 0x9fffffff (0x8000000) MX[B](B)
	[18] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[19] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[20] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[21] 0	0	0x00002000 - 0x000020ff (0x100) IX[B]
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[23] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[24] -1	0	0x00003880 - 0x000038bf (0x40) IX[B]
	[25] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[26] -1	0	0x00001200 - 0x0000121f (0x20) IX[B]
	[27] -1	0	0x00003c20 - 0x00003c2f (0x10) IX[B]
	[28] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[29] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[30] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[31] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[32] -1	0	0x00003c00 - 0x00003c1f (0x20) IX[B]
	[33] -1	0	0x000038e0 - 0x000038ff (0x20) IX[B]
	[34] -1	0	0x000038c0 - 0x000038df (0x20) IX[B]
	[35] -1	0	0x00002000 - 0x000020ff (0x100) IX[B](B)
	[36] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[37] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit 98000000 0 0
(==) RADEON(0): Write-combining range (0x98000000,0x8000000)
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x08000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x9fff9800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(==) RADEON(0): Not using accelerated EXA DownloadFromScreen hook
(II) RADEON(0): Allocating from a screen of 131072 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00753000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00757000
(II) RADEON(0): Will use 7500 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 7500 kb for back buffer at offset 0x0075b000
(II) RADEON(0): Will use 7500 kb for depth buffer at offset 0x00eae000
(II) RADEON(0): Will use 53760 kb for textures at offset 0x01601000
(II) RADEON(0): Will use 54780 kb for X Server offscreen at offset 0x04a81000
(II) RADEON(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.3
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf90e7000
(II) RADEON(0): [drm] mapped SAREA 0xf90e7000 to 0xb7b12000
(II) RADEON(0): [drm] framebuffer handle = 0x98000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xb0000000
(II) RADEON(0): [agp] Ring mapped at 0xaf8a0000
(II) RADEON(0): [agp] ring read ptr handle = 0xb0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7fe6000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xb0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf6a0000
(II) RADEON(0): [agp] GART texture map handle = 0xb0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaf1c0000
(II) RADEON(0): [drm] register handle = 0x90400000
(II) RADEON(0): [dri] Visual configs initialized
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x9fff9800 0x1fff0000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc1
restore pll1
restore LVDS
(==) RADEON(0): Backing store disabled
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 10
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x9fff9800 is: 0x9fff9800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xb07fb000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x9fff9800 0x9fff9800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xb07fb000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): num pipes is 1
(II) EXA(0): Offscreen pixmap area of 56094720 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "XAANoOffscreenPixmaps" is not used
(WW) RADEON(0): Option "AddARGBGLXVisuals" is not used
(WW) RADEON(0): Option "OpenGLOverlay" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 423 x 317
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Mouse1: Sensitivity: 1
(II) Synaptics touchpad driver version 0.15.2
Touchpad no synaptics event device found
(**) Option "Device" "/dev/input/mice"
(**) Option "SHMConfig" "on"
(**) Option "HorizScrollDelta" "0"
Query no Synaptics: 6003C8
(EE) Touchpad no synaptics touchpad detected and no repeater device
(EE) Touchpad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "Touchpad"
(II) UnloadModule: "synaptics"
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Keyboard1: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) evaluating device (Keyboard1)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) evaluating device (Mouse1)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded

Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Ciao..
ho provato a installare i driver propietari ati
ma non veniva rilevato il display neanche con glxinfo.. Allora ho eseguito xorgsetup da init 3
e così glxinfo mi dà un output normale ma quando installo i driver propietari:

==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Detected configuration:
Architecture: i686 (32-bit)
which: no XFree86 in (/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/usr/g/jre/bin:/usr/lib/qt/bin:/usr/share/texmf/bin)
X Server: unable to detect
Removing temporary directory: fglrx-install
Ho una Ati un pò vecchiotta Radeon 9200 PRO e sto usando questi driver "ati-driver-installer-8.28.8.run", sapete come risolvere? Grazie ciao

Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Nessuno sa aiutarmi?.. Ora stavo riprovando di installare i driver per vedere se riesco ad aumentare la risoluz e far girare compiz ma niente, ho provato glxinfo e questo è il risultato:

No protocol specified
Error: unable to open display :0 :(

Cosa stranissima, xorg si modifica ad ogni avvio, anche facendo xorgsetup, al riavvio perdo le impostazioni, questa cosa con la 12.1 non mi succedeva, consigli?

Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Ciao ho quasi risolto, ho trovato un driver che mi fà installare (ati-driver-installer-8-3-x86.x86_64.run )
ora ho visto da

Codice: Seleziona tutto

glxinfo | grep rendering
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
allora ho provato con

Codice: Seleziona tutto

aticonfig --fsaa on
Warning: Option 'FSAAEnable' doesn't affect running session.
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.fglrx-0
aticonfig: Writing to '/etc/X11/xorg.conf' failed. Bad file descriptor.
Ora non so propio che fare..

h8er
Linux 1.x
Linux 1.x
Messaggi: 111
Iscritto il: dom 10 ott 2004, 0:00

Re: problemi con driver ati su slack 12.2

Messaggio da h8er »

ciao stesso problema con i catalyst 9.1, gli 8.12 invece vanno perfettamente, Darkstar89 questo è il mio xorg.conf relativo alla sezione della scheda video se ti può aiutare.. (ati 9800 pro agp)

Section "Device"
Identifier "ATI Technologies Inc Radeon R350 [Radeon 9800 Pro]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "UseInternalAGPGART" "yes"
Option "MaxGARTSize" "128"
Option "AccelMethod" "EXA"
Option "XAANoOffscreenPixmaps" "true"
Option "AGPMode" "8"
Option "AGPFastWrite" "true"
Option "UseFastTLS" "1"
EndSection

controlla di avere una section DRI da qualche parte come questa

Section "DRI"
Group 0
Mode 0666
EndSection

e credo anche servano

Load "glx"
Load "dri"

nella section Module, magari posta direttamente il tuo xorg.conf così vediamo se c'è qualcosa di sbagliato

ciao

Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Ciao, ho provato a modificare il mio xorg.conf aggiungendo queste righe
Section "DRI"
Group 0
Mode 0666
EndSection

..Mentre le righe
Load "glx"
Load "dri"
erano già presenti...
Facendo così non parte il runlevel 4,
Questo è il mio xorg.conf (che ho ricreato con xorgsetup)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi/:unscaled"
EndSection

Section "Module"
Load "dri"
Load "xtrap"
Load "glx"
Load "extmod"
Load "dbe"
Load "FGL.renamed.libdri"
Load "record"
Load "GLcore"
Load "freetype"
Load "type1"
EndSection
...
io non sto riuscendo a risolvere, bastano le info che ho dato o
mando tutto l'xorgsetup? :o

Avatar utente
targzeta
Iper Master
Iper Master
Messaggi: 6635
Iscritto il: gio 3 nov 2005, 14:05
Nome Cognome: Emanuele Tomasi
Slackware: 64-current
Kernel: latest stable
Desktop: IceWM
Località: Carpignano Sal. (LE) <-> Pisa

Re: problemi con driver ati su slack 12.2

Messaggio da targzeta »

Luco ha scritto:...

Codice: Seleziona tutto

fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
fglrx: Unknown symbol pci_disable_msi
fglrx: Unknown symbol pci_enable_msi
fglrx: Unknown symbol pci_disable_msi
fglrx: Unknown symbol pci_enable_msi
...
Non so se hai risolto, ma qui la tua soluzione.

Spina
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama

Avatar utente
Darkstar89
Packager
Packager
Messaggi: 372
Iscritto il: mer 17 dic 2008, 19:06
Nome Cognome: Francesco
Slackware: 13
Località: Sassari

Re: problemi con driver ati su slack 12.2

Messaggio da Darkstar89 »

Ciao, dopo aver riavviato il pc l'interfaccia grafica non parte, sto usando una live, se faccio xrgsetup, l'xorg.conf che viene creato non funziona lo stesso, propio ieri che lo avevo messo tutto a posto :cry:
Ho seguito la procedura del link dato da spina, facendo "CONFIG_PCI_MSI=y" e andando su /usr/src/linux/2.6.27.7 e dando make, poi ho eliminato la directory /etc/ati e reinstallando i driver
Cosa posso fare non si avvia X :(

h8er
Linux 1.x
Linux 1.x
Messaggi: 111
Iscritto il: dom 10 ott 2004, 0:00

Re: problemi con driver ati su slack 12.2

Messaggio da h8er »

Darkstar89 il log di xorg cosa ti dice ? (/var/log/Xorg.0.log) a me ad esempio delle volte non partiva ma per motivi tutt'altro dipendenti dalla scheda video (esempio problemi con la configurazione del mouse), comunque installi correttamente i pacchetti ? la procedura è di generarseli tramite il comando:

sh nomeinstallerati.run --buildpkg Slackware/All

e poi installarli con il solito comando installpkg

i 9.1 sono sicuramente buggati per chi possiede una scheda agp per cui lasciali perdere e prova con una versione 8.xx, se hai già installato qualcosa tramite il comando che ti ho dato sopra rimuovi i pacchetti con removepkg, poi elimina la directory /etc/ati e reinstalla i pacchetti, se tutto è apposto un modprobe fglrx non dovrebbe restituirti nessun errore a quel punto il problema è solo la configurazione del xorg.conf, aticonfig leggendo in giro non è sto capolavoro di programma per cui spesso tanti consigliano di configurare a mano il tutto magari partendo da uno xorg.conf trovato in rete almeno io ho fatto così.. generati uno xorg.conf pulito con xorgsetup, e fai in modo che parta X anche banalmente con i driver vesa, fai un backup e poi inizia a lavorare aggiungendo le info per i driver ati... il log di Xorg comunque dovrebbe darti un'idea di cosa c'è che non va

ciao
Ultima modifica di h8er il dom 15 feb 2009, 14:23, modificato 1 volta in totale.

Avatar utente
targzeta
Iper Master
Iper Master
Messaggi: 6635
Iscritto il: gio 3 nov 2005, 14:05
Nome Cognome: Emanuele Tomasi
Slackware: 64-current
Kernel: latest stable
Desktop: IceWM
Località: Carpignano Sal. (LE) <-> Pisa

Re: problemi con driver ati su slack 12.2

Messaggio da targzeta »

h8er ha scritto:...sh nomeinstallerati.run --buildpkg Slackware/All...
Con gli ultimi driver ti basta dare:

Codice: Seleziona tutto

sh nomeinstallerati.run --buildpkg
o addirittura

Codice: Seleziona tutto

sh nomeinstallerati.run --buildandinstallpkg
per installare i pacchetti dopo la creazione.

Spina
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama

Rispondi