Some problems in GSlacky :(

[JAVH]

Hello, sorry for not write in italian language, this is my first post and a Slackware user.

I downloaded Slacky ISO a few days and did the full install 2 times because I have the same problem (I resolved the polkituser bug , thanks ), when Gnome starts, gnome-power-manager show an error balloon, and another error from the mail client (in spanish)

Codice: Seleziona tutto

"No se ha instalado correctamente la configuración de energía predeterminada para la gestión de energía. Por favor contacte con el administrador de su sistema"

Some like:

Codice: Seleziona tutto

"The default energy setup has been not correctly installed. Please contact with your system administrator"

If I run manually gnome-power-manager this appairs in console:

Codice: Seleziona tutto

(gnome-power-manager:2939): Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «murrine»,
TI:19:29:54   TH:0x8bbf1e0   FI:gpm-manager.c   FN:gpm_manager_init,1723
 - no gconf schema installed!

In KDE4 the analog channel has been disabled and i can only use digital (maybe permissions problem, when uninstall GSlaky this bug disappears), I use a kernel 2.26.28 (compiled by me and downloaded from kernel.org)

I did wait for a few days but nobody asks, maybe the problem is my PC.

[absinthe]

I'm running neither slackware nor gslacky but...
1) have you tried a root session? test the environment as root with all privileges enabled and look at effects. if everything goes right it's a permission issue
2) did you enable acpi and cpufreq governor in your kernel? did you load related modules at start up? without a correct kernel support you cannot run any gui power manager utility!

for what concerns the second issue: I don't know... maybe a missing theme?

imho,
M

[gohanz]

I don't know, but it seems that your are missing some gconf settings. Your GSlacky setup is an upgrade or a fresh install on Slackware 12.2?

[JAVH]

I'm running neither slackware nor gslacky but...
1) have you tried a root session? test the environment as root with all privileges enabled and look at effects. if everything goes right it's a permission issue
2) did you enable acpi and cpufreq governor in your kernel? did you load related modules at start up? without a correct kernel support you cannot run any gui power manager utility!

for what concerns the second issue: I don't know... maybe a missing theme?

imho,
M

Yes, the root session has the same problem, ACPI and cpufreq gvernor are enabled in my kernel.

Your GSlacky setup is an upgrade or a fresh install on Slackware 12.2?

Is a fresh install, I upgraded to Slackware 12.2 some days after his launch, but I didn't install any GSlacky version until now.

[gohanz]

Your console report an error about gconf and "Murrine". This package "Murrine" is not a part of GSlacky distro. It's a Gtk+ Theme. If you have installed it, maybe something is wrong in your setup. Try to reinstall the Gnome-power-manager package.
You can find it in /packages/desktop on GSlacky iso.

[JAVH]

I did reinstall gnome-power-manager and now show this:

Codice: Seleziona tutto

TI:20:35:43   TH:0x89431e0   FI:gpm-manager.c   FN:gpm_manager_init,1723
 - no gconf schema installed!
Traceback:
   gnome-power-manager [0x804eb65]
   gnome-power-manager [0x80763de]
   /usr/lib/libgobject-2.0.so.0(g_type_create_instance+0x4da) [0xb6d114da]

I run this for try fix:

Codice: Seleziona tutto

export GCONF_CONFIG_SOURCE="xml::/etc/gconf/gconf.xml.defaults"
gconftool-2 --makefile-install-rule /etc/gconf/schemas/*.schemas


But not succesfully

Mail Notification show this:

Codice: Seleziona tutto

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/new-mail/enabled"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/new-mail/command"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/mail-read/enabled"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/mail-read/command"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/mail-changed/enabled"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/mail-changed/command"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/sounds/new-mail/enabled"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/sounds/new-mail/file"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/sounds/play-command"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/ui/properties-dialog/width"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/ui/properties-dialog/height"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/blink-on-errors"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/trusted-x509-certificates"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/trusted-servers"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/display-seen-mail"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/tooltip-mail-summary"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/tooltip-mail-summary-limit"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/always-display-icon"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/display-message-count"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/click-action-3"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/enabled"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/position"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/expiration/enabled"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/expiration/delay-2"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/actions"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/limit"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/fallback-charsets"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/expiration/delay-2"

** (mail-notification:2599): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/messages-considered-as-read"

...and show a dialog that check the setup of mail-notification.

When try to start a gnome session i get a blue background image and a mouse pointer (X).. no menus, no programs no nothing.., I must to Crtl+Alt-BackSpace to exit.

Thanks for your time.

[absinthe]

Yes, the root session has the same problem, ACPI and cpufreq gvernor are enabled in my kernel.

OK, I don't what to stress the topic too much but... have you also _loaded_ modules at start up?

if you have a blue screen and gnome seems borken:
1- backup your config directory, it should be something like ~/.gnome or ~/.gnome2,
2- delete it and
3- restart a fresh session without any previous setting!

maybe gohanz can help with a complete list of hidden config directories: I'm not sure that ~/.gnome is the only thing you have to backup and delete... maybe there are also some gtk+ related directories

M

[JAVH]

Hello, I did remove .gnome2, .gtkrc-2.0 and .gnome2_private and nothing,

Where are the gnome log files??, I search in /var/log but nothing.

I tried running gnome-session in xfce, but think that is not correct, here is the output:

Codice: Seleziona tutto

gnome-session[2755]: WARNING: Could not parse desktop file /home/arturo/.config/autostart/xfce4-tips-autostart.desktop: El archivo de claves no tiene la clave «Name»
gnome-session[2755]: WARNING: could not read /home/arturo/.config/autostart/xfce4-tips-autostart.desktop
gnome-session[2755]: WARNING: No required applications specified
** Message: another SSH agent is running at: /tmp/ssh-VHNaSi2285/agent.2285
WARNING: COULD NOT FIND FIREFOX LIBRARIES
WARNING: CONDUIT MAY CRASH UNEXPECTEDLY
WARNING: PLEASE TALK TO THE PERSON WHO PACKAGED CONDUIT
No se ha asignado valor a «/desktop/gnome/applications/at/visual/exec»
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
I: caps.c: Dropping root privileges.
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.

** (parcellite:2790): WARNING **: Binding '<Ctrl><Alt>H' failed!


** (parcellite:2790): WARNING **: Binding '<Ctrl><Alt>A' failed!


** (parcellite:2790): WARNING **: Binding '<Ctrl><Alt>P' failed!


** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/new-mail/enabled"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/new-mail/command"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/mail-read/enabled"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/mail-read/command"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/mail-changed/enabled"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/commands/mail-changed/command"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/sounds/new-mail/enabled"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/sounds/new-mail/file"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/sounds/play-command"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/ui/properties-dialog/width"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/ui/properties-dialog/height"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/blink-on-errors"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/trusted-x509-certificates"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/trusted-servers"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/display-seen-mail"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/tooltip-mail-summary"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/tooltip-mail-summary-limit"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/always-display-icon"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/display-message-count"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/click-action-3"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/enabled"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/position"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/expiration/enabled"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/expiration/delay-2"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/actions"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/limit"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/fallback-charsets"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/expiration/delay-2"

** (mail-notification:2772): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/messages-considered-as-read"
Failure: Module initalization failed
Traceback (most recent call last):
  File "/usr/bin/disk-manager", line 30, in <module>
    import gtk
  File "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 48, in <module>
    from gtk import _gtk
  File "/usr/lib/python2.5/site-packages/cairo/__init__.py", line 1, in <module>
    from _cairo import *
ImportError: /usr/lib/python2.5/site-packages/cairo/_cairo.so: undefined symbol: cairo_surface_get_fallback_resolution

** (nm-applet:2791): WARNING **: <WARN>  applet_dbus_manager_start_service(): Could not acquire the NetworkManagerUserSettings service as it is already taken.  Return: 3

beagled will run in the background.
Use beagle-status to check progress of beagled.
For log files check /home/arturo/.beagle/Log/current-Beagle.

Traceback (most recent call last):
  File "/usr/share/system-config-printer/applet.py", line 32, in <module>
    import pynotify
  File "/usr/lib/python2.5/site-packages/gtk-2.0/pynotify/__init__.py", line 1, in <module>
    from _pynotify import *
ImportError: could not import gtk
[Main                ][INFO   ] Conduit v0.3.15 Installed: True (Main.py:99)
[Main                ][INFO   ] Python: 2.5.2 (r252:60911, Sep 11 2008, 13:43:31)
[GCC 4.2.4] (Main.py:100)
[Main                ][INFO   ] Platform Implementations: GnomeVfs,gtkmozembed,GConf (Main.py:101)
[Main                ][INFO   ] Using UI: gtk (Main.py:131)
Traceback (most recent call last):
  File "/usr/bin/conduit.real", line 24, in <module>
    app = conduit.Main.Application()
  File "/usr/lib/python2.5/site-packages/conduit/Main.py", line 132, in __init__
    self.ImportGUI()
  File "/usr/lib/python2.5/site-packages/conduit/Main.py", line 234, in ImportGUI
    self.uiLib = __import__("conduit.%sui.UI" % self.ui, {}, {}, ['UI'])
  File "/usr/lib/python2.5/site-packages/conduit/gtkui/UI.py", line 11, in <module>
    import gtk, gtk.glade
  File "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 48, in <module>
    from gtk import _gtk
  File "/usr/lib/python2.5/site-packages/cairo/__init__.py", line 1, in <module>
    from _cairo import *
ImportError: /usr/lib/python2.5/site-packages/cairo/_cairo.so: undefined symbol: cairo_surface_get_fallback_resolution

HP Linux Imaging and Printing System (ver. 2.8.10)
System Tray Status Service ver. 2.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

There is already an instance of beagle-search running.
Cannot run in --icon mode! Exiting...
warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting.
TI:10:09:08   TH:0x8a501e0   FI:gpm-manager.c   FN:gpm_manager_init,1723
 - no gconf schema installed!
Traceback:
   gnome-power-manager [0x804eb65]
   gnome-power-manager [0x80763de]
   /usr/lib/libgobject-2.0.so.0(g_type_create_instance+0x4da) [0xb6dd74da]]

I use cairo-1.6.4-i486-1

[gohanz]

I use cairo-1.6.4-i486-1

Why this cairo version? GSlacky-2.24.3 work with cairo-1.8.6!

[JAVH]

I don't understand, I did a full install, Upgraded to cairo-1.6.4-i486-1 but its the same, starting gnome hangs, after cairo upgrade the console show this:

Codice: Seleziona tutto

WARNING: COULD NOT FIND FIREFOX LIBRARIES
WARNING: CONDUIT MAY CRASH UNEXPECTEDLY
WARNING: PLEASE TALK TO THE PERSON WHO PACKAGED CONDUIT
*** ERROR ***
TI:15:00:52   TH:0x97041e0   FI:gpm-manager.c   FN:gpm_manager_init,1723
 - no gconf schema installed!
Traceback:
   gnome-power-manager [0x804eb65]
   gnome-power-manager [0x80763de]
   /usr/lib/libgobject-2.0.so.0(g_type_create_instance+0x4da) [0xb6de14da]
beagled will run in the background.
Use beagle-status to check progress of beagled.
For log files check /home/arturo/.beagle/Log/current-Beagle.

There is already an instance of beagle-search running.
Cannot run in --icon mode! Exiting...

[01mHP Linux Imaging and Printing System (ver. 2.8.10)
[01mSystem Tray Status Service ver. 2.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

** (mail-notification:2253): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/position"

** (mail-notification:2253): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/expiration/enabled"

** (mail-notification:2253): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/expiration/delay-2"

** (mail-notification:2253): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/actions"

** (mail-notification:2253): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/limit"

** (mail-notification:2253): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/fallback-charsets"

** (mail-notification:2253): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/popups/expiration/delay-2"

** (mail-notification:2253): WARNING **: no se puede encontrar el valor predeterminado de la clave de configuración "/apps/mail-notification/messages-considered-as-read"
No se ha asignado valor a «/desktop/gnome/applications/at/visual/exec»
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
I: caps.c: Dropping root privileges.
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.

** (parcellite:2274): WARNING **: Binding '<Ctrl><Alt>H' failed!


** (parcellite:2274): WARNING **: Binding '<Ctrl><Alt>A' failed!


** (parcellite:2274): WARNING **: Binding '<Ctrl><Alt>P' failed!

Failure: Module initalization failed

** (nm-applet:2275): WARNING **: <WARN>  applet_dbus_manager_start_service(): Could not acquire the NetworkManagerUserSettings service as it is already taken.  Return: 3

beagled will run in the background.
Use beagle-status to check progress of beagled.
For log files check /home/arturo/.beagle/Log/current-Beagle.

system-config-printer-applet: failed to start NewPrinterNotification service
[Main                ][INFO   ] Conduit v0.3.15 Installed: True (Main.py:99)
[Main                ][INFO   ] Python: 2.5.2 (r252:60911, Sep 11 2008, 13:43:31)
[GCC 4.2.4] (Main.py:100)
[Main                ][INFO   ] Platform Implementations: GnomeVfs,gtkmozembed,GConf (Main.py:101)
[Main                ][INFO   ] Using UI: gtk (Main.py:131)

HP Linux Imaging and Printing System (ver. 2.8.10)
System Tray Status Service ver. 2.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

There is already an instance of beagle-search running.
Cannot run in --icon mode! Exiting...
warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting.
TI:16:54:28   TH:0x92151e0   FI:gpm-manager.c   FN:gpm_manager_init,1723
 - no gconf schema installed!
Traceback:
   gnome-power-manager [0x804eb65]
   gnome-power-manager [0x80763de]
   /usr/lib/libgobject-2.0.so.0(g_type_create_instance+0x4da) [0xb6e524da]
[gtkui.Canvas        ][INFO   ] Module Information: goocanvas v(0, 13, 1) (/usr/lib/python2.5/site-packages/goocanvasmodule.so) (Canvas.py:25)
[modules.AVConverter ][INFO   ] Module Information: gst v(0, 10, 13) (/usr/lib/python2.5/site-packages/gst-0.10/gst/__init__.pyc) (AudioVideoConverterModule.py:23)
[modules.Flickr      ][INFO   ] Module Information: flickrapi v1.1 (/usr/lib/conduit/modules/FlickrModule/flickrapi/__init__.pyc) (FlickrModule.py:26)
[modules.Google      ][INFO   ] Module Information: gdata (/usr/lib/conduit/modules/GoogleModule/gdata/__init__.pyc) (GoogleModule.py:45)
[modules.Network     ][INFO   ] Network support enabled (NetworkModule.py:30)
[modules.Network     ][DEBUG  ] Starting AvahiAdvertiser server (Server.py:35)
[modules.Network     ][DEBUG  ] Announcing avahi conduit service (Peers.py:159)
[modules.Feed        ][INFO   ] RSS Feed support disabled (FeedModule.py:53)
[modules.Facebook    ][INFO   ] Module Information: pyfacebook v0.1 (/usr/lib/conduit/modules/FacebookModule/pyfacebook/__init__.pyc) (FacebookModule.py:30)
[modules.Backpack    ][INFO   ] Module Information: backpack (/usr/lib/conduit/modules/BackpackModule/backpack/backpack.pyc) (BackpackModule.py:22)
[modules.iPod        ][INFO   ] iPod support disabled (iPodModule.py:46)
[Module              ][WARNING] Error loading the file: /usr/lib/conduit/modules/iPodModule/iPodModule.py
Traceback (most recent call last):
  File "/usr/lib/python2.5/site-packages/conduit/Module.py", line 173, in _load_modules_in_file
    mod = self._import_file(filename)
  File "/usr/lib/python2.5/site-packages/conduit/Module.py", line 154, in _import_file
    mods = pydoc.importfile (filename)
  File "/usr/lib/python2.5/pydoc.py", line 259, in importfile
    raise ErrorDuringImport(path, sys.exc_info())
ErrorDuringImport: problem in /usr/lib/conduit/modules/iPodModule/iPodModule.py - <type 'exceptions.NameError'>: name 'gpod' is not defined
 (Module.py:201)
[modules.Evolution   ]
[dataproviders.SimpleFactory][INFO   ] Item Added: /org/freedesktop/Hal/devices/volume_uuid_14E407F1E407D3C0 (SimpleFactory.py:18)
[dataproviders.DataProvider][DEBUG  ] DataProviderFactory <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)>: Emitting dataprovider-added for file:///mnt/windows-/org/freedesktop/Hal/devices/volume_uuid_14E407F1E407D3C0 (DataProvider.py:463)
[dataproviders.DataProvider][DEBUG  ] DataProviderFactory <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)>: Emitting dataprovider-added for file:///mnt/sdb9-/org/freedesktop/Hal/devices/volume_uuid_19a0f7cc_6192_4a5a_97a9_bb57925aa7eb (DataProvider.py:463)
[Module              ][INFO   ] Dynamic dataprovider (Wrapper: Carpeta twoway (UID: FolderTwoWay-None)) available by <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)> (Module.py:67)
[Module              ][WARNING] Wrapper with key file:///mnt/sdb9-/org/freedesktop/Hal/devices/volume_uuid_19a0f7cc_6192_4a5a_97a9_bb57925aa7eb allready loaded (Module.py:127)
[modules.File        ][INFO   ] Creating preconfigured folder dataprovider: file:///mnt/sda6 (FileModule.py:158)
[dataproviders.SimpleFactory][INFO   ] Item Added: /org/freedesktop/Hal/devices/volume_uuid_6EAC1BE8AC1BAA1B (SimpleFactory.py:18)
[dataproviders.DataProvider][DEBUG  ] DataProviderFactory <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)>: Emitting dataprovider-added for file:///mnt/sda6-/org/freedesktop/Hal/devices/volume_uuid_6EAC1BE8AC1BAA1B (DataProvider.py:463)
[Module              ][INFO   ] Dynamic dataprovider (Wrapper: Carpeta twoway (UID: FolderTwoWay-None)) available by <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)> (Module.py:67)
[dataproviders.SimpleFactory][INFO   ] Item Added: /org/freedesktop/Hal/devices/volume_uuid_6EAC1BE8AC1BAA1B (SimpleFactory.py:18)
[dataproviders.DataProvider][DEBUG  ] DataProviderFactory <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)>: Emitting dataprovider-added for file:///mnt/sda6-/org/freedesktop/Hal/devices/volume_uuid_6EAC1BE8AC1BAA1B (DataProvider.py:463)
[Module              ][INFO   ] Dynamic dataprovider (Wrapper: Carpeta twoway (UID: FolderTwoWay-None)) available by <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)> (Module.py:67)
[Module              ][WARNING] Wrapper with key file:///mnt/sda6-/org/freedesktop/Hal/devices/volume_uuid_6EAC1BE8AC1BAA1B allready loaded (Module.py:127)
[Module              ][WARNING] Wrapper with key file:///mnt/winxp-/org/freedesktop/Hal/devices/volume_uuid_1EEC7081EC70554D allready loaded (Module.py:127)
[modules.File        ][INFO   ] Creating preconfigured folder dataprovider: file:///mnt/fat (FileModule.py:158)
[dataproviders.SimpleFactory][INFO   ] Item Added: /org/freedesktop/Hal/devices/volume_uuid_FC7A_DFDC (SimpleFactory.py:18)
[dataproviders.DataProvider][DEBUG  ] DataProviderFactory <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)>: Emitting dataprovider-added for file:///mnt/fat-/org/freedesktop/Hal/devices/volume_uuid_FC7A_DFDC (DataProvider.py:463)
[Module              ][INFO   ] Dynamic dataprovider (Wrapper: Carpeta twoway (UID: FolderTwoWay-None)) available by <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)> (Module.py:67)
[dataproviders.SimpleFactory][INFO   ] Item Added: /org/freedesktop/Hal/devices/volume_uuid_FC7A_DFDC (SimpleFactory.py:18)
[dataproviders.DataProvider][DEBUG  ] DataProviderFactory <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)>: Emitting dataprovider-added for file:///mnt/fat-/org/freedesktop/Hal/devices/volume_uuid_FC7A_DFDC (DataProvider.py:463)
[Module              ][INFO   ] Dynamic dataprovider (Wrapper: Carpeta twoway (UID: FolderTwoWay-None)) available by <RemovableDeviceFactory object at 0x8f0b93c (conduit+dataproviders+DataProvider+DataProviderFactory at 0x8e45b10)> (Module.py:67)
[Module              ][WARNING] Wrapper with key file:///mnt/fat-/org/freedesktop/Hal/devices/volume_uuid_FC7A_DFDC allready loaded (Module.py:127)
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/Manager: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/Manager: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_19a0f7cc_6192_4a5a_97a9_bb57925aa7eb: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_19a0f7cc_6192_4a5a_97a9_bb57925aa7eb: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/sdb9 (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/sdb9
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_983b668f_4193_4f70_a09e_06dc87c6be96: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_983b668f_4193_4f70_a09e_06dc87c6be96: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_1EE00446E004269D: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_1EE00446E004269D: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/sdb7 (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/sdb7
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_2CBCFAAABCFA6DA8: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_2CBCFAAABCFA6DA8: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/sdb6 (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/sdb6
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_FC7A_DFDC: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_FC7A_DFDC: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/fat (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/fat
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_part2_size_1024: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_part2_size_1024: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_6601481b_4540_454e_ac46_a277836ae6a4: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_6601481b_4540_454e_ac46_a277836ae6a4: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/sdb10 (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/sdb10
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_E6843FF1843FC33B: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_E6843FF1843FC33B: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/sdb1 (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/sdb1
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD2000JD_00_WD_WCAL82080196: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_AC903E70903E40DE: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_AC903E70903E40DE: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/sda8 (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/sda8
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_4C4C2DDA4C2DC016: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_4C4C2DDA4C2DC016: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/sda7 (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/sda7
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_6EAC1BE8AC1BAA1B: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_6EAC1BE8AC1BAA1B: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/sda6 (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/sda6
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_14E407F1E407D3C0: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_14E407F1E407D3C0: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/windows (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/windows
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_part4_size_1024: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_part4_size_1024: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_38c4bae7_38ac_476e_96f2_180d0322be49: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_38c4bae7_38ac_476e_96f2_180d0322be49: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:/// (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_ac0b2910_03d1_463b_afe2_ecef5569b074: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_ac0b2910_03d1_463b_afe2_ecef5569b074: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_1EEC7081EC70554D: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/volume_uuid_1EEC7081EC70554D: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
[dataproviders.VolumeFactory][DEBUG  ] Adjusted mount: file:///mnt/winxp (VolumeFactory.py:25)
DEBUG:dataproviders.VolumeFactory:Adjusted mount: file:///mnt/winxp
[dbus.proxies        ][ERROR  ] Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes ")) (proxies.py:400)
ERROR:dbus.proxies:Introspect error on :1.0:/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD7500AACS__WD_WCAU40269475: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=2262 comm="/usr/bin/python /usr/bin/conduit.real -i ") interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.0" (uid=0 pid=1702 comm="/usr/sbin/hald --daemon=yes "))
[dbus.proxies        ][DEBUG  ] Executing introspect queue due to error (proxies.py:403)
DEBUG:dbus.proxies:Executing introspect queue due to error
ImportError: could not import bonobo.ui
[gtkui.UI            ][INFO   ] Main window constructed  (thread: -1211599168) (UI.py:202)
INFO:gtkui.UI:Main window constructed  (thread: -1211599168)
[SyncSet             ][INFO   ] Restoring Sync Set from /home/arturo/.config/conduit/settings.xml (SyncSet.py:195)
INFO:SyncSet:Restoring Sync Set from /home/arturo/.config/conduit/settings.xml
[SyncSet             ][DEBUG  ] Restoring FolderTwoWay to (source=True) (SyncSet.py:60)
DEBUG:SyncSet:Restoring FolderTwoWay to (source=True)
[Conduit             ][DEBUG  ] Adding twoway dataprovider into source position (Conduit.py:140)
DEBUG:Conduit:Adding twoway dataprovider into source position
[DBus                ][DEBUG  ] DBus Exported: / (DBus.py:127)
DEBUG:DBus:DBus Exported: /
[DBus                ][DEBUG  ] DBus Exported: /syncset/gui (DBus.py:127)
DEBUG:DBus:DBus Exported: /syncset/gui
[DBus                ][DEBUG  ] DBus Exported: /syncset/dbus (DBus.py:127)
DEBUG:DBus:DBus Exported: /syncset/dbus
[DBus                ][DEBUG  ] DBus Message from /syncset/gui: Emmiting DBus signal ConduitAdded (DBus.py:134)
DEBUG:DBus:DBus Message from /syncset/gui: Emmiting DBus signal ConduitAdded



The Firefox libraries are in /etc/ld.so.conf and I reinstalled the schemas with gconftool, so I installed murrine engine but gnome dont start

[absinthe]

wooo !!! you have won the first prize for the longest error report
mmm... ok let me say that it seems you have twisted things a lot! don't worry I've done something really worse in the past
I can't understand/guess/figure out reasons of a such complex report so you can wait for another gohanz answer. btw: you have written you have upgraded to cairo 1.6.4 was it a typo for 1.8.6?!

additionally: you have removed gtk hidden dir. but it is possible that other apps use it! nonetheless, I think you can reset everything by:

1- re-delete all gnome hidden dirs.
2- reinstall gnome by hand (the installer _is_ ok but it seems there are some issues at a low level in your system) by mounting the iso as explained in the gslacky page and running something like (just guessed not tested):

Codice: Seleziona tutto

find $GSLACKY_MOUNT_DIR -type f -iname "*tgz" | xargs upgradepkg --install-new --


where $GSLACKY_MOUNT_DIR is the iso mount point.

my 2 cents,
M

[gohanz]

JAVH maybe we are talking about two different version of Gnome (GSlacky)? Please report your Gnome version.

Codice: Seleziona tutto

cat /etc/gnome-version

[JAVH]

wooo !!! you have won the first prize for the longest error report
mmm... ok let me say that it seems you have twisted things a lot! don't worry I've done something really worse in the past
I can't understand/guess/figure out reasons of a such complex report so you can wait for another gohanz answer. btw: you have written you have upgraded to cairo 1.6.4 was it a typo for 1.8.6?!

additionally: you have removed gtk hidden dir. but it is possible that other apps use it! nonetheless, I think you can reset everything by:

1- re-delete all gnome hidden dirs.
2- reinstall gnome by hand (the installer _is_ ok but it seems there are some issues at a low level in your system) by mounting the iso as explained in the gslacky page and running something like (just guessed not tested):

Codice: Seleziona tutto

find $GSLACKY_MOUNT_DIR -type f -iname "*tgz" | xargs upgradepkg --install-new --


where $GSLACKY_MOUNT_DIR is the iso mount point.

my 2 cents,
M

I reinstall with your sugestted way, I deleted .gnome2, .gnome2_private, .gconf and .gconfd but I get the same error , curiously, I see that cairo downgraded again (and other packages) so after I upgraded manually all GSlacky ISO packages.

JAVH maybe we are talking about two different version of Gnome (GSlacky)? Please report your Gnome version.

Codice: Seleziona tutto

cat /etc/gnome-version

Mi Gnome version is (ta ta ta taan ) :

Codice: Seleziona tutto

bash-3.1$ cat /etc/gnome-version
Gnome-Slacky 2.24.3

I do not want to reinstall

[gohanz]

JAVH maybe this is the last solution!

1) Check the GSlacky-2.24.3 md5 ( 842d2466620448b58fe8657da19ff8ae GSlacky-2.24.3-PulseAudio-i686.iso )

2) Delete the directory /etc/gconf

3) Remove all GSlacky packages with install.sh script

4) Reinstall all GSlacky packages with install.sh script

5) Make a new test account, and try if it work good. I think that your murrine setup break something in gconf setup.

[JAVH]

I did all (the md5 is the same 842d2466620448b58fe8657da19ff8ae ) delete gconf directory and reinstalled... nothing

Curiously, the full install did not install all packages (I manually install this packages with upgradepkg) but I get the same error.

Thanks for you time, I will reinstall Slackware