cd-rom non parte

Se avete problemi con l'installazione e la configurazione di Slackware postate qui. Non usate questo forum per argomenti generali... per quelli usate Gnu/Linux in genere.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Rispondi
emamarro
Linux 0.x
Linux 0.x
Messaggi: 14
Iscritto il: sab 6 set 2003, 0:00

cd-rom non parte

Messaggio da emamarro »

ciao,ho il problema che il cd-rom non parte..(slack9)
<BR>si trova montato su /mnt però quando metto dentro un cd e clicco su /mnt/cd-rom semplicemente non succede niente...
<BR>cosa potrei fare?
<BR>grazie
<BR>ema<br>

Avatar utente
Loris
Admin
Admin
Messaggi: 7730
Iscritto il: lun 31 mar 2003, 0:00
Nome Cognome: Loris Vincenzi
Località: Gradisca D'Isonzo
Contatta:

cd-rom non parte

Messaggio da Loris »

I tuoi dispositivi sono IDE ? usi l´ emulazione scsi ?
<BR>Prova a montarlo da console così:
<BR># mount -t iso9660 /dev/sr0 /mnt/cdrom<br>
"Ho una testa piuttosto balzana e comunque non sono quello che credete" - Roger Keith Barrett

emamarro
Linux 0.x
Linux 0.x
Messaggi: 14
Iscritto il: sab 6 set 2003, 0:00

cd-rom non parte

Messaggio da emamarro »

mi risponde così..
<BR>
<BR>root@darkstar:~# mount -t iso9660 /dev/sr0 /mnt/cdrom
<BR>mount: /dev/sr0 is not a valid block device
<BR>
<BR>questo invece è il fstab.se può esserti utile..
<BR>
<BR>/dev/hda6 swap swap defaults 0 0
<BR>/dev/hda2 / ext3 defaults 1 1
<BR>/dev/hda5 /home ext3 defaults 1 2
<BR>/dev/hda1 /fat32win vfat defaults 1 0
<BR>/dev/cdrom /mnt/cdrom iso9660 noauto,owner,ro 0 0
<BR>/dev/fd0 /mnt/floppy auto noauto,owner 0 0
<BR>devpts /dev/pts devpts gid=5,mode=620 0 0
<BR>proc /proc proc defaults 0 0
<BR>
<BR>ciao..
<BR>
<BR>#eject /mnt/cdrom funziona..
<BR>
<BR><br>

Avatar utente
Loris
Admin
Admin
Messaggi: 7730
Iscritto il: lun 31 mar 2003, 0:00
Nome Cognome: Loris Vincenzi
Località: Gradisca D'Isonzo
Contatta:

cd-rom non parte

Messaggio da Loris »

ls -al /dev/cdrom cosa dice ? verifica dove linka, poi dimmi se è attiva l´emulazione scsi.
<BR>dmesg | less cosa dice ?<br>
"Ho una testa piuttosto balzana e comunque non sono quello che credete" - Roger Keith Barrett

emamarro
Linux 0.x
Linux 0.x
Messaggi: 14
Iscritto il: sab 6 set 2003, 0:00

cd-rom non parte

Messaggio da emamarro »

#ls -al /dev/cdrom
<BR>lrwxrwxrwx 1 root root 8 Sep 13 17:52 /dev/cdrom -> /dev/hdd
<BR>
<BR>#dmesg|less
<BR>
<BR>Linux version 2.4.20 (root@midas) (gcc version 3.2.2) #2 Mon Mar 17 22:02:15 PST 2003
<BR>BIOS-provided physical RAM map:
<BR> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<BR> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<BR> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<BR> BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
<BR> BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS)
<BR> BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data)
<BR> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<BR>447MB LOWMEM available.
<BR>On node 0 totalpages: 114672
<BR>zone(0): 4096 pages.
<BR>zone(1): 110576 pages.
<BR>zone(2): 0 pages.
<BR>Kernel command line: BOOT_IMAGE=Linux ro root=302
<BR>Initializing CPU#0
<BR>Detected 900.068 MHz processor.
<BR>Console: colour dummy device 80x25
<BR>Calibrating delay loop... 1795.68 BogoMIPS
<BR>Memory: 450668k/458688k available (1733k kernel code, 7632k reserved, 568k data, 112k init, 0k
<BR> highmem)
<BR>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
<BR>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
<BR>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
<BR>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<BR>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<BR>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<BR>CPU: L2 Cache: 256K (64 bytes/line)
<BR>CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
<BR>CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
<BR>CPU: AMD Athlon(tm) Processor stepping 02
<BR>Enabling fast FPU save and restore... done.
<BR>Checking ´hlt´ instruction... OK.
<BR>POSIX conformance testing by UNIFIX
<BR>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<BR>mtrr: detected mtrr type: Intel
<BR>PCI: PCI BIOS revision 2.10 entry at 0xfb220, last bus=1
<BR>PCI: Using configuration type 1
<BR>PCI: Probing PCI hardware
<BR>Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 89 & 1f -> 09
<BR>PCI: Using IRQ router VIA [1106/0686] at 00:07.0
<BR>Linux NET4.0 for Linux 2.4
<BR>Based upon Swansea University Computer Society NET3.039
<BR>Initializing RT netlink socket
<BR>Starting kswapd
<BR>VFS: Diskquotas version dquot_6.4.0 initialized
<BR>Journalled Block Device driver loaded
<BR>vesafb: framebuffer at 0xd4000000, mapped to 0xdc80d000, size 4096k
<BR>vesafb: mode is 1024x768x8, linelength=1024, pages=4
<BR>vesafb: protected mode interface info at c000:02e5
<BR>vesafb: scrolling: redraw
<BR>Console: switching to colour frame buffer device 128x48
<BR>fb0: VESA VGA frame buffer device
<BR>pty: 512 Unix98 ptys configured
<BR>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI
<BR>enabled
<BR>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<BR>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<BR>Real Time Clock Driver v1.10e
<BR>Uniform Multi-Platform E-IDE driver Revision: 6.31
<BR>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<BR>VP_IDE: IDE controller on PCI bus 00 dev 39
<BR>VP_IDE: chipset revision 16
<BR>VP_IDE: not 100% native mode: will probe irqs later
<BR>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<BR>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
<BR> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
<BR> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
<BR>hda: QUANTUM FIREBALLP LM20.5, ATA DISK drive
<BR>hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive
<BR>hdd: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
<BR>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<BR>ide1 at 0x170-0x177,0x376 on irq 15
<BR>blk: queue c0388784, I/O limit 4095Mb (mask 0xffffffff)
<BR>hda: 40132503 sectors (20548 MB) w/1900KiB Cache, CHS=2498/255/63, UDMA(66)
<BR>hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
<BR>Uniform CD-ROM driver Revision: 3.12
<BR>hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
<BR>ide-floppy driver 0.99.newide
<BR>Partition check:
<BR> hda: hda1 hda2 hda3 < hda5 hda6 >
<BR>Floppy drive(s): fd0 is 1.44M
<BR>FDC 0 is a post-1991 82077
<BR>RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
<BR>loop: loaded (max 8 devices)
<BR>ide-floppy driver 0.99.newide
<BR>SCSI subsystem driver Revision: 1.00
<BR>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<BR>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<BR>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<BR>md: linear personality registered as nr 1
<BR>md: raid0 personality registered as nr 2
<BR>md: raid1 personality registered as nr 3
<BR>md: raid5 personality registered as nr 4
<BR>raid5: measuring checksumming speed
<BR> 8regs : 1289.600 MB/sec
<BR> 32regs : 741.600 MB/sec
<BR> pII_mmx : 2106.400 MB/sec
<BR> p5_mmx : 2687.600 MB/sec
<BR>raid5: using function: p5_mmx (2687.600 MB/sec)
<BR>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<BR>md: Autodetecting RAID arrays.
<BR>md: autorun ...
<BR>md: ... autorun DONE.
<BR>LVM version 1.0.5+(22/07/2002)
<BR>NET4: Linux TCP/IP 1.0 for NET4.0
<BR>IP Protocols: ICMP, UDP, TCP
<BR>IP: routing cache hash table of 4096 buckets, 32Kbytes
<BR>TCP: Hash tables configured (established 32768 bind 65536)
<BR>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<BR>kjournald starting. Commit interval 5 seconds
<BR>EXT3-fs: mounted filesystem with ordered data mode.
<BR>VFS: Mounted root (ext3 filesystem) readonly.
<BR>Freeing unused kernel memory: 112k freed
<BR>Adding Swap: 168640k swap-space (priority -1)
<BR>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
<BR>kjournald starting. Commit interval 5 seconds
<BR>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
<BR>EXT3-fs: mounted filesystem with ordered data mode.
<BR>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<BR>Linux Kernel Card Services 3.1.22
<BR> options: [pci] [cardbus] [pm]
<BR>isapnp: Scanning for PnP cards...
<BR>isapnp: No Plug & Play device found
<BR>Intel PCIC probe: not found.
<BR>Databook TCIC-2 PCMCIA probe: not found.
<BR>ds: no socket drivers loaded!
<BR>Via 686a audio driver 1.9.1
<BR>PCI: Found IRQ 10 for device 00:07.5
<BR>ac97_codec: AC97 Audio codec, id: 0x4943:0x4511 (ICE1232)
<BR>via82cxxx: board #1 at 0xDC00, IRQ 10
<BR>usb.c: registered new driver usbdevfs
<BR>usb.c: registered new driver hub
<BR>uhci.c: USB Universal Host Controller Interface driver v1.1
<BR>PCI: Found IRQ 9 for device 00:07.2
<BR>PCI: Sharing IRQ 9 with 00:07.3
<BR>uhci.c: USB UHCI at I/O 0xd400, IRQ 9
<BR>usb.c: new USB bus registered, assigned bus number 1
<BR>hub.c: USB hub found
<BR>hub.c: 2 ports detected
<BR>PCI: Found IRQ 9 for device 00:07.3
<BR>PCI: Sharing IRQ 9 with 00:07.2
<BR>uhci.c: USB UHCI at I/O 0xd800, IRQ 9
<BR>usb.c: new USB bus registered, assigned bus number 2
<BR>hub.c: USB hub found
<BR>hub.c: 2 ports detected
<BR>parport0: PC-style at 0x378 [PCSPP,EPP]
<BR>parport_pc: Via 686A parallel port: io=0x378
<BR>hub.c: new USB device 00:07.2-1, assigned address 2
<BR>usb.c: USB device 2 (vend/prod 0x735/0xc541) is not claimed by any active driver.
<BR>via_audio: ignoring drain playback error -11
<BR>via_audio: ignoring drain playback error -11
<BR>CSLIP: code copyright 1989 Regents of the University of California
<BR>PPP generic driver version 2.4.2
<BR>PPP BSD Compression module registered
<BR>PPP Deflate Compression module registered
<BR>via_audio: ignoring drain playback error -11
<BR>
<BR>#scusa per la lunghezza..ciao
<BR><br>

Avatar utente
Loris
Admin
Admin
Messaggi: 7730
Iscritto il: lun 31 mar 2003, 0:00
Nome Cognome: Loris Vincenzi
Località: Gradisca D'Isonzo
Contatta:

cd-rom non parte

Messaggio da Loris »

Strano, con # mount -t iso9660 /dev/hdd /mnt/cdrom che dice ?
<BR>Lo fai da utente root ? che cosa cerchi di montare ? non cd audio vero :-) Il masterizatore ti funziona ?<br>
"Ho una testa piuttosto balzana e comunque non sono quello che credete" - Roger Keith Barrett

emamarro
Linux 0.x
Linux 0.x
Messaggi: 14
Iscritto il: sab 6 set 2003, 0:00

cd-rom non parte

Messaggio da emamarro »

#mount -t iso9660 /dev/hdd/mnt/cdrom
<BR>
<BR>Usage: mount -V : print version
<BR> mount -h : print this help
<BR> mount : list mounted filesystems
<BR> mount -l : idem, including volume labels
<BR>So far the informational part. Next the mounting.
<BR>The command is `mount [-t fstype] something somewhere´.
<BR>Details found in /etc/fstab may be omitted.
<BR> mount -a [-t|-O] ... : mount all stuff from /etc/fstab
<BR> mount device : mount device at the known place
<BR> mount directory : mount known device here
<BR> mount -t type dev dir : ordinary mount command
<BR>Note that one does not really mount a device, one mounts
<BR>a filesystem (of the given type) found on the device.
<BR>One can also mount an already visible directory tree elsewhere:
<BR> mount --bind olddir newdir
<BR>or move a subtree:
<BR> mount --move olddir newdir
<BR>A device can be given by name, say /dev/hda1 or /dev/cdrom,
<BR>or by label, using -L label or by uuid, using -U uuid .
<BR>Other options: [-nfFrsvw] [-o options].
<BR>For many more details, say man 8 mount .
<BR>
<BR>
<BR>il lettore è un dvd..
<BR>l´altro lettore è un masterizzatore..
<BR>li vede ma non li sente:-)
<BR>
<BR>Comunque slackware ti fa imparare...una volta sistemata mi piace troppo di più delle altre distro..
<BR>ciao
<BR><br>

Roby
Linux 0.x
Linux 0.x
Messaggi: 7
Iscritto il: gio 10 apr 2003, 0:00

cd-rom non parte

Messaggio da Roby »

A me sembra strano, messo come sei messo il mount deve funzionare.....
<BR>quest´ultimo comando ho notato che l´hai dato in modo sbagliato infatti /dev/hdd/mnt/cdrom non deve essere unito ma staccato /dev/hdd /mnt/cdrom prova a ripetere il mount anche su altri dev tipo hdc o prova dal masterizzatore e viceversa.<br>

Rispondi