"Risolto" attivare scheda wifi TL-WN951N

Se avete problemi con l'installazione e la configurazione di Slackware postate qui. Non usate questo forum per argomenti generali... per quelli usate Gnu/Linux in genere.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Avatar utente
maxmo
Linux 2.x
Linux 2.x
Messaggi: 336
Iscritto il: lun 28 feb 2005, 0:00
Slackware: 14.1
Kernel: 3.10.17-smp
Desktop: xface

"Risolto" attivare scheda wifi TL-WN951N

Messaggio da maxmo »

Ciao a tutti, premetto che mi sono letto i vari post sull'argomento ma non riesco ancora ad attivare la scheda wifi che ho montato sul pc
La scheda è una PCI della tp-link modello TL-WN951N ed ho installato i driver con ndiswrapper.
Ho modificato il file rc.modules inserendo la riga

Codice: Seleziona tutto

/sbin/modprobe ndiswrapper
.
Ma manca ancora qualcosa. Cosa? Mi aiutate?

eccovi i risultati di alcuni comandi:

Codice: Seleziona tutto

# ndiswrapper -l
netathw : driver installed
	device (168C:0023) present (alternate driver: ath9k)

Codice: Seleziona tutto

# lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge
	Subsystem: ASRock Incorporation Device 0308
	Flags: bus master, medium devsel, latency 8
	Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [80] AGP version 3.5
	Capabilities: [50] Power Management version 2
	Kernel driver in use: agpgart-via
	Kernel modules: via-agp

00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
	Subsystem: ASRock Incorporation Device 1308
	Flags: bus master, medium devsel, latency 0

00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
	Subsystem: ASRock Incorporation Device 2308
	Flags: bus master, medium devsel, latency 0

00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
	Flags: bus master, medium devsel, latency 0
	Kernel modules: via-agp

00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
	Subsystem: ASRock Incorporation Device 4308
	Flags: bus master, medium devsel, latency 0

00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller (prog-if 20 [IO(X)-APIC])
	Subsystem: ASRock Incorporation Device 5308
	Flags: bus master, fast devsel, latency 0

00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
	Flags: bus master, medium devsel, latency 0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, medium devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: fc000000-feafffff
	Prefetchable memory behind bridge: d0000000-dfffffff
	Capabilities: [70] Power Management version 2
	Kernel modules: shpchp

00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 80000000-803fffff
	Prefetchable memory behind bridge: f6f00000-f6ffffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [68] Power Management version 2
	Capabilities: [70] MSI: Enable+ Count=1/1 Maskable+ 64bit+
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Virtual Channel
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:0f.0 IDE interface: VIA Technologies, Inc. Device 5372 (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: ASRock Incorporation Device 5372
	Flags: bus master, medium devsel, latency 32, IRQ 21
	I/O ports at dc00 [size=8]
	I/O ports at d880 [size=4]
	I/O ports at d800 [size=8]
	I/O ports at d480 [size=4]
	I/O ports at d400 [size=16]
	I/O ports at d000 [size=256]
	Capabilities: [c0] Power Management version 2
	Kernel driver in use: sata_via

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP])
	Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard
	Flags: bus master, medium devsel, latency 32
	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	I/O ports at fc00 [size=16]
	Capabilities: [c0] Power Management version 2
	Kernel driver in use: pata_via

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0) (prog-if 00 [UHCI])
	Subsystem: ASRock Incorporation K7VT6
	Flags: bus master, medium devsel, latency 32, IRQ 20
	I/O ports at c480 [size=32]
	Capabilities: [80] Power Management version 2
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0) (prog-if 00 [UHCI])
	Subsystem: ASRock Incorporation K7VT6
	Flags: bus master, medium devsel, latency 32, IRQ 22
	I/O ports at c800 [size=32]
	Capabilities: [80] Power Management version 2
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0) (prog-if 00 [UHCI])
	Subsystem: ASRock Incorporation K7VT6
	Flags: bus master, medium devsel, latency 32, IRQ 21
	I/O ports at c880 [size=32]
	Capabilities: [80] Power Management version 2
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0) (prog-if 00 [UHCI])
	Subsystem: ASRock Incorporation K7VT6
	Flags: bus master, medium devsel, latency 32, IRQ 23
	I/O ports at cc00 [size=32]
	Capabilities: [80] Power Management version 2
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90) (prog-if 20 [EHCI])
	Subsystem: ASRock Incorporation K7VT6 motherboard
	Flags: bus master, medium devsel, latency 32, IRQ 21
	Memory at f7fffc00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
	Capabilities: [88] Debug port: BAR=1 offset=00a0
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237S PCI to ISA Bridge
	Subsystem: ASRock Incorporation Device 3372
	Flags: medium devsel
	Capabilities: [c0] Power Management version 2
	Kernel modules: i2c-viapro

00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
	Subsystem: VIA Technologies, Inc. Device 337e
	Flags: bus master, medium devsel, latency 32
	Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
	Subsystem: ASRock Incorporation K7VT6 motherboard
	Flags: bus master, medium devsel, latency 32, IRQ 23
	I/O ports at c000 [size=256]
	Memory at f7fff800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [40] Power Management version 2
	Kernel driver in use: via-rhine
	Kernel modules: via-rhine

00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
	Flags: bus master, fast devsel, latency 0
	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+

00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: feb00000-febfffff
	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+
	Capabilities: [70] Subsystem: ASRock Incorporation Device 337a

01:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce 6800 GT] (rev a1) (prog-if 00 [VGA controller])
	Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
	[virtual] Expansion ROM at feae0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
	Capabilities: [44] AGP version 3.0
	Kernel driver in use: nvidia
	Kernel modules: nvidia, nouveau, nvidiafb

03:04.0 Non-VGA unclassified device: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01)
	Subsystem: Device 0080:0002
	!!! Invalid class 0000 for header type 02
	Flags: bus master, 66MHz, medium devsel, latency 168
	Memory at <ignored> (32-bit, non-prefetchable)
	Bus: primary=00, secondary=00, subordinate=02, sec-latency=0
	Kernel modules: ath9k

03:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
	Subsystem: Creative Labs CT4830 SBLive! Value
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at e880 [size=32]
	Capabilities: [dc] Power Management version 1
	Kernel driver in use: EMU10K1_Audigy
	Kernel modules: snd-emu10k1

03:05.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
	Subsystem: Creative Labs Gameport Joystick
	Flags: bus master, medium devsel, latency 32
	I/O ports at ec00 [size=8]
	Capabilities: [dc] Power Management version 1
	Kernel driver in use: Emu10k1_gameport
	Kernel modules: emu10k1-gp

Codice: Seleziona tutto

bash-4.1# ifconfig         
eth0      Link encap:Ethernet  HWaddr 00:19:66:96:42:C0  
          inet addr:192.168.1.109  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::219:66ff:fe96:42c0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:31097 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19626 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:40268469 (38.4 Mb)  TX bytes:1707749 (1.6 Mb)
          Interrupt:23 Base address:0x2800 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:880 (880.0 b)  TX bytes:880 (880.0 b)

ppp0      Link encap:Point-to-Point Protocol  
          inet addr:87.8.114.203  P-t-P:192.168.100.1  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:36 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3 
          RX bytes:1366 (1.3 Kb)  TX bytes:61 (61.0 b)

Codice: Seleziona tutto

# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

ppp0      no wireless extensions.
Ultima modifica di maxmo il dom 18 dic 2011, 16:41, modificato 1 volta in totale.

vitosky
Linux 0.x
Linux 0.x
Messaggi: 84
Iscritto il: mer 10 feb 2010, 20:55
Slackware: 13.37
Kernel: 2.6.37.6 huge.s

Re: attivare scheda wifi

Messaggio da vitosky »

Prova senza ndiswrapper la scheda e' supportata dai driver ath9k (atheros)
che manager usi per connetterti?

Avatar utente
maxmo
Linux 2.x
Linux 2.x
Messaggi: 336
Iscritto il: lun 28 feb 2005, 0:00
Slackware: 14.1
Kernel: 3.10.17-smp
Desktop: xface

Re: attivare scheda wifi

Messaggio da maxmo »

Penso di utilizzare Wicd ma ogni suggerimento è valido.
Tu dici che il kernel supporta la ath9k ma perchè nei vari comandi non mi compare?
Cosa devo configurare?
Tolgo /sbin/modprobe ndiswrapper da rc.modules?

vitosky
Linux 0.x
Linux 0.x
Messaggi: 84
Iscritto il: mer 10 feb 2010, 20:55
Slackware: 13.37
Kernel: 2.6.37.6 huge.s

Re: attivare scheda wifi

Messaggio da vitosky »

No allora lascia perdere per un momento ndiswrapper hai installato Wicd?

Avatar utente
maxmo
Linux 2.x
Linux 2.x
Messaggi: 336
Iscritto il: lun 28 feb 2005, 0:00
Slackware: 14.1
Kernel: 3.10.17-smp
Desktop: xface

Re: attivare scheda wifi

Messaggio da maxmo »

si

vitosky
Linux 0.x
Linux 0.x
Messaggi: 84
Iscritto il: mer 10 feb 2010, 20:55
Slackware: 13.37
Kernel: 2.6.37.6 huge.s

Re: attivare scheda wifi

Messaggio da vitosky »

Ok allora fai partire wicd e vedi se c'e' wlan0

Avatar utente
maxmo
Linux 2.x
Linux 2.x
Messaggi: 336
Iscritto il: lun 28 feb 2005, 0:00
Slackware: 14.1
Kernel: 3.10.17-smp
Desktop: xface

Re: attivare scheda wifi

Messaggio da maxmo »

Che comandi devo dare? La GUI di wicd dice che non c'è nessuna rete wirless trovata

vitosky
Linux 0.x
Linux 0.x
Messaggi: 84
Iscritto il: mer 10 feb 2010, 20:55
Slackware: 13.37
Kernel: 2.6.37.6 huge.s

Re: attivare scheda wifi

Messaggio da vitosky »

Allora devi scrivere wlan0 nel menu' delle connessione dovrebbe esserci solo la connessione eth gia' attivata.
e poi fagli fare lo scan

vitosky
Linux 0.x
Linux 0.x
Messaggi: 84
Iscritto il: mer 10 feb 2010, 20:55
Slackware: 13.37
Kernel: 2.6.37.6 huge.s

Re: attivare scheda wifi

Messaggio da vitosky »

devi scriverlo in general settings-network interfaces

Avatar utente
maxmo
Linux 2.x
Linux 2.x
Messaggi: 336
Iscritto il: lun 28 feb 2005, 0:00
Slackware: 14.1
Kernel: 3.10.17-smp
Desktop: xface

Re: attivare scheda wifi

Messaggio da maxmo »

Dove devo inserire Wlan0? il campo interfaccia wirless è inibito.
Infatti iw config non la rileva perchè credo che ci sia qualche problema ne l riconoscimento della scheda.

vitosky
Linux 0.x
Linux 0.x
Messaggi: 84
Iscritto il: mer 10 feb 2010, 20:55
Slackware: 13.37
Kernel: 2.6.37.6 huge.s

Re: attivare scheda wifi

Messaggio da vitosky »

devi scriverlo in general settings-network interfaces-wireless interface

Immagine

Avatar utente
maxmo
Linux 2.x
Linux 2.x
Messaggi: 336
Iscritto il: lun 28 feb 2005, 0:00
Slackware: 14.1
Kernel: 3.10.17-smp
Desktop: xface

Re: attivare scheda wifi

Messaggio da maxmo »

Ho inserito Wlan0 nel campo wireless interface di general setting ma nulla da fare: nessuna rete wirless trovata

vitosky
Linux 0.x
Linux 0.x
Messaggi: 84
Iscritto il: mer 10 feb 2010, 20:55
Slackware: 13.37
Kernel: 2.6.37.6 huge.s

Re: attivare scheda wifi

Messaggio da vitosky »

wlan0 minuscolo e poi dai il refresh

Avatar utente
maxmo
Linux 2.x
Linux 2.x
Messaggi: 336
Iscritto il: lun 28 feb 2005, 0:00
Slackware: 14.1
Kernel: 3.10.17-smp
Desktop: xface

Re: attivare scheda wifi

Messaggio da maxmo »

Non ci siamo.

vitosky
Linux 0.x
Linux 0.x
Messaggi: 84
Iscritto il: mer 10 feb 2010, 20:55
Slackware: 13.37
Kernel: 2.6.37.6 huge.s

Re: attivare scheda wifi

Messaggio da vitosky »

hai dato il refresh? prova diverse volte

Immagine

Rispondi