[RISOLTO] wicd: Nessuna rete wireless trovata

[rik70]

Ti manca il firmware, ecco perché non va:

Codice: Seleziona tutto

[ 1747.266347] brcm80211: fail to load firmware brcm/bcm43xx-0.fw
[ 1747.266359] brcm80211: Failed to find firmware usually in /lib/firmware/brcm


Prova così,
apri un terminale e dai:

Codice: Seleziona tutto

git clone git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git

Al termine della "clonazione" troverai una directory 'linux-firmware/'
Ora, da root:

Codice: Seleziona tutto

mkdir -v /lib/firmware/brcm

cp -iv linux-firmware/brcm/*.fw /lib/firmware/brcm/


Fatto questo, prova a rimuovere il modulo e a ricaricarlo:

Codice: Seleziona tutto

modprobe -r -v brcm80211
modprobe -v brcm80211


E vedi che dice ora il comando dmesg.

A tuo rischio e pericolo

Ciao


Edit:

Ooops, arrivo tardi... sorry

[targzeta]

Aspettate un attimo. Ma voi siete sicuri che il firmware non ci sia. Nella mia Slackware (che però è una current) il firmware in questione si trova nel pacchetto kernel-firmware. DrSlump, sei sicuro che il pacchetto citato ce l'hai installato?

Emanuele

[DrSlump]

Mh, oddio, ho guardato con pkgtool e c'è un
"kernel-firmware-2.6.37.6-"


Spina, intendevi questo?

[DrSlump]

Io aspetto ordini e che vi mettiate d'accordo

[rik70]

Aspettate un attimo. Ma voi siete sicuri che il firmware non ci sia. Nella mia Slackware (che però è una current) il firmware in questione si trova nel pacchetto kernel-firmware. DrSlump, sei sicuro che il pacchetto citato ce l'hai installato?

Emanuele

Nel kernel-firmware della 13.37 non c'è, in current come hai detto tu sì.

A questo punto mi chiedo: anziché prendere i firmware da debian o dal git del kernel, non potrà direttamente installare/aggiornare il pacchetto da current? Forse è la cosa + semplice.

[DrSlump]

Aspettate un attimo. Ma voi siete sicuri che il firmware non ci sia. Nella mia Slackware (che però è una current) il firmware in questione si trova nel pacchetto kernel-firmware. DrSlump, sei sicuro che il pacchetto citato ce l'hai installato?

Emanuele

Nel kernel-firmware della 13.37 non c'è, in current come hai detto tu sì.

A questo punto mi chiedo: anziché prendere i firmware da debian o dal git del kernel, non potrà direttamente installare/aggiornare il pacchetto da current? Forse è la cosa + semplice.

Come devo fare?

[rik70]

Come devo fare?

Spettiamo spina che dice, dato che sei su Salix e io ne so meno di lui

[DrSlump]

Ecco, non ho aspettato.
Ero troppo curioso e ho seguito il consiglio di miklos.

Se può servire rimetto il risultato di "dmesg":

Codice: Seleziona tutto

root[leonardo]# dmesg
    0.597573] libata version 3.00 loaded.
[    0.597777] usbcore: registered new interface driver usbfs
[    0.597966] usbcore: registered new interface driver hub
[    0.598082] usbcore: registered new device driver usb
[    0.598455] PCI: Using ACPI for IRQ routing
[    0.598462] PCI: pci_cache_line_size set to 64 bytes
[    0.598586] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.598592] reserve RAM buffer: 000000003f43f000 - 000000003fffffff
[    0.598599] reserve RAM buffer: 000000003f600000 - 000000003fffffff
[    0.598937] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.598949] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.598959] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.601064] Switching to clocksource tsc
[    0.606371] pnp: PnP ACPI init
[    0.606418] ACPI: bus type pnp registered
[    0.608482] pnp 00:00: [bus 00-ff]
[    0.608489] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.608496] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.608501] pnp 00:00: [io  0x0d00-0xffff window]
[    0.608507] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.608513] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.608519] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.608525] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.608530] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.608536] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.608542] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.608548] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.608553] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.608559] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.608565] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.608570] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.608576] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.608582] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.608588] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.608814] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.609176] pnp 00:01: [io  0x002e-0x002f]
[    0.609182] pnp 00:01: [io  0x004e-0x004f]
[    0.609187] pnp 00:01: [io  0x0061]
[    0.609192] pnp 00:01: [io  0x0070]
[    0.609196] pnp 00:01: [io  0x0080]
[    0.609201] pnp 00:01: [io  0x0092]
[    0.609206] pnp 00:01: [io  0x00b2-0x00b3]
[    0.609210] pnp 00:01: [io  0x0063]
[    0.609215] pnp 00:01: [io  0x0065]
[    0.609219] pnp 00:01: [io  0x0067]
[    0.609224] pnp 00:01: [io  0x0600-0x060f]
[    0.609229] pnp 00:01: [io  0x0610]
[    0.609235] pnp 00:01: [io  0x0800-0x080f]
[    0.609245] pnp 00:01: [io  0x0810-0x0817]
[    0.609250] pnp 00:01: [io  0x0400-0x047f]
[    0.609255] pnp 00:01: [io  0x0500-0x053f]
[    0.609261] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.609266] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.609272] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.609277] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.609282] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.609288] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.609293] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.609523] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.609553] pnp 00:02: [io  0x0000-0x001f]
[    0.609559] pnp 00:02: [io  0x0081-0x0091]
[    0.609564] pnp 00:02: [io  0x0093-0x009f]
[    0.609569] pnp 00:02: [io  0x00c0-0x00df]
[    0.609575] pnp 00:02: [dma 4]
[    0.609710] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.609781] pnp 00:03: [io  0x0070-0x0077]
[    0.609913] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.610108] pnp 00:04: [irq 0 disabled]
[    0.610127] pnp 00:04: [irq 8]
[    0.610133] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.610270] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.610303] pnp 00:05: [io  0x00f0]
[    0.610313] pnp 00:05: [irq 13]
[    0.610444] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.610475] pnp 00:06: [mem 0xff800000-0xffffffff]
[    0.610607] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.610664] pnp 00:07: [io  0x0060]
[    0.610669] pnp 00:07: [io  0x0064]
[    0.610680] pnp 00:07: [irq 1]
[    0.610813] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.610863] pnp 00:08: [irq 12]
[    0.611018] pnp 00:08: Plug and Play ACPI device, IDs SYN1e33 SYN1e00 SYN0002 PNP0f13 (active)
[    0.611172] pnp: PnP ACPI: found 9 devices
[    0.611177] ACPI: ACPI bus type pnp unregistered
[    0.611202] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.611208] system 00:01: [io  0x0610] has been reserved
[    0.611215] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.611221] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.611228] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.611235] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.611243] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.611251] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.611258] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.611265] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.611272] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.611279] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.611287] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.655741] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.655750] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.655761] pci 0000:00:1c.0:   bridge window [mem 0x53000000-0x53ffffff]
[    0.655771] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.655782] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.655788] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.655798] pci 0000:00:1c.1:   bridge window [mem 0x52000000-0x52ffffff]
[    0.655807] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.655818] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.655822] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.655831] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.655839] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.655871] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.655881] pci 0000:00:1c.0: setting latency timer to 64
[    0.655897] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.655906] pci 0000:00:1c.1: setting latency timer to 64
[    0.655918] pci 0000:00:1e.0: setting latency timer to 64
[    0.655934] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.655940] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.655946] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.655953] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.655959] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.655965] pci_bus 0000:01: resource 1 [mem 0x53000000-0x53ffffff]
[    0.655971] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.655978] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.655983] pci_bus 0000:02: resource 1 [mem 0x52000000-0x52ffffff]
[    0.655990] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.655997] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.656003] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.656009] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.656016] pci_bus 0000:03: resource 7 [mem 0x40000000-0xfebfffff]
[    0.656069] NET: Registered protocol family 2
[    0.656131] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.656388] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.657341] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.657589] TCP: Hash tables configured (established 131072 bind 65536)
[    0.657595] TCP reno registered
[    0.657604] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.657618] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.657774] NET: Registered protocol family 1
[    0.657963] RPC: Registered udp transport module.
[    0.657969] RPC: Registered tcp transport module.
[    0.657973] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.657997] pci 0000:00:02.0: Boot video device
[    0.668982] PCI: CLS 64 bytes, default 64
[    0.669271] Simple Boot Flag at 0x44 set to 0x1
[    0.670859] audit: initializing netlink socket (disabled)
[    0.670881] type=2000 audit(1327610552.668:1): initialized
[    0.671084] highmem bounce pool size: 64 pages
[    0.678955] VFS: Disk quotas dquot_6.5.2
[    0.679103] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.679733] DLM (built Apr 10 2011 00:58:34) installed
[    0.682308] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.682798] NTFS driver 2.1.29 [Flags: R/W].
[    0.683150] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.683665] JFS: nTxBlock = 7874, nTxLock = 62994
[    0.687591] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.688832] SGI XFS Quota Management subsystem
[    0.688850] OCFS2 1.5.0
[    0.689150] ocfs2: Registered cluster interface o2cb
[    0.689300] ocfs2: Registered cluster interface user
[    0.689306] OCFS2 DLMFS 1.5.0
[    0.689481] OCFS2 User DLM kernel interface loaded
[    0.689486] OCFS2 Node Manager 1.5.0
[    0.689690] OCFS2 DLM 1.5.0
[    0.690364] Btrfs loaded
[    0.691189] GFS2 (built Apr 10 2011 01:00:12) installed
[    0.691207] msgmni has been set to 1720
[    0.693122] async_tx: api initialized (async)
[    0.693251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.693295] io scheduler noop registered
[    0.693300] io scheduler deadline registered
[    0.693360] io scheduler cfq registered (default)
[    0.693779] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20101013/nspredef-352)
[    0.693799] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.693803] _OSC request data:1 0 1d
[    0.693992] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20101013/nspredef-352)
[    0.694008] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.694012] _OSC request data:1 0 1d
[    0.694370] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.694833] intel_idle: MWAIT substates: 0x20220
[    0.694838] intel_idle: v0.4 model 0x1C
[    0.694842] intel_idle: lapic_timer_reliable_states 0x2
[    0.694853] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.695015] Switching to clocksource hpet
[    0.695147] ERST: Table is not found!
[    0.695182] isapnp: Scanning for PnP cards...
[    1.051916] isapnp: No Plug & Play device found
[    1.061432] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.074026] floppy0: no floppy controllers found
[    4.078859] brd: module loaded
[    4.081287] loop: module loaded
[    4.081292] Compaq SMART2 Driver (v 2.6.0)
[    4.081473] HP CISS Driver (v 3.6.26)
[    4.082913] Loading iSCSI transport class v2.0-870.
[    4.084037] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[    4.087860] Adaptec aacraid driver 1.1-5[26400]-ms
[    4.088235] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    4.088715] scsi: <fdomain> Detection failed (no card)
[    4.088726] sym53c416.c: Version 1.0.0-ac
[    4.088754] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[    4.088897] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[    4.089168] iscsi: registered transport (qla4xxx)
[    4.089267] QLogic iSCSI HBA Driver
[    4.089271] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[    4.089276] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    4.089386] Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.0
[    4.111025] Failed initialization of WD-7000 SCSI card!
[    4.206098] DC390: clustering now enabled by default. If you get problems load
[    4.206104]        with "disable_clustering=1" and report to maintainers
[    4.206312] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    4.206481] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    4.206584] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[    4.206703] mpt2sas version 06.100.00.00 loaded
[    4.207066] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    4.207352] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    4.207450] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.207551] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    4.207652] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[    4.207760] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    4.207860] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    4.208267] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[    4.208749] ahci 0000:00:1f.2: version 3.0
[    4.208774] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.208850] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    4.208914] ahci: SSS flag set, parallel bus scan disabled
[    4.208962] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    4.208971] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[    4.208981] ahci 0000:00:1f.2: setting latency timer to 64
[    4.211369] scsi2 : ahci
[    4.211757] scsi3 : ahci
[    4.212070] scsi4 : ahci
[    4.212358] scsi5 : ahci
[    4.212906] ata1: SATA max UDMA/133 abar m1024@0x54204000 port 0x54204100 irq 40
[    4.212915] ata2: SATA max UDMA/133 abar m1024@0x54204000 port 0x54204180 irq 40
[    4.212920] ata3: DUMMY
[    4.212924] ata4: DUMMY
[    4.220506] scsi6 : pata_legacy
[    4.220749] ata5: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    4.673030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.674527] ata1.00: unexpected _GTF length (4)
[    4.674845] ata1.00: ATA-8: ST9160314AS, 0001SDM1, max UDMA/133
[    4.674852] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.676688] ata1.00: unexpected _GTF length (4)
[    4.677054] ata1.00: configured for UDMA/133
[    4.677257] scsi 2:0:0:0: Direct-Access     ATA      ST9160314AS      0001 PQ: 0 ANSI: 5
[    4.677864] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    4.677993] sd 2:0:0:0: [sda] Write Protect is off
[    4.678001] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.678087] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.709189]  sda: sda1 sda2 sda3
[    4.710090] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.984037] ata2: SATA link down (SStatus 0 SControl 300)
[    4.985821] scsi7 : pata_legacy
[    4.986084] ata6: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    5.137889] I2O subsystem v1.325
[    5.137895] i2o: max drivers = 8
[    5.138240] I2O Configuration OSM v1.323
[    5.138321] I2O Bus Adapter OSM v1.317
[    5.138402] I2O Block Device OSM v1.325
[    5.138711] I2O SCSI Peripheral OSM v1.316
[    5.138795] I2O ProcFS OSM v1.316
[    5.138886] Fusion MPT base driver 3.04.17
[    5.138891] Copyright (c) 1999-2008 LSI Corporation
[    5.138902] Fusion MPT SPI Host driver 3.04.17
[    5.139046] Fusion MPT FC Host driver 3.04.17
[    5.139168] Fusion MPT SAS Host driver 3.04.17
[    5.139286] Fusion MPT misc device (ioctl) driver 3.04.17
[    5.139457] mptctl: Registered with Fusion MPT base driver
[    5.139463] mptctl: /dev/mptctl @ (major,minor=10,220)
[    5.139468] Fusion MPT LAN driver 3.04.17
[    5.139716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.139775] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.139811] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    5.139818] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.140033] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.140083] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    5.140101] ehci_hcd 0000:00:1d.7: debug port 1
[    5.143988] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    5.144048] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x54204400
[    5.153025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.153090] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.153098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.153104] usb usb1: Product: EHCI Host Controller
[    5.153109] usb usb1: Manufacturer: Linux 2.6.37.6 ehci_hcd
[    5.153114] usb usb1: SerialNumber: 0000:00:1d.7
[    5.153482] hub 1-0:1.0: USB hub found
[    5.153494] hub 1-0:1.0: 8 ports detected
[    5.153940] 116x: driver isp116x-hcd, 03 Nov 2005
[    5.154048] driver isp1362-hcd, 2005-04-04
[    5.154130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.154251] uhci_hcd: USB Universal Host Controller Interface driver
[    5.154355] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.154370] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.154378] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.154574] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.154617] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[    5.154693] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.154700] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.154706] usb usb2: Product: UHCI Host Controller
[    5.154711] usb usb2: Manufacturer: Linux 2.6.37.6 uhci_hcd
[    5.154716] usb usb2: SerialNumber: 0000:00:1d.0
[    5.155111] hub 2-0:1.0: USB hub found
[    5.155122] hub 2-0:1.0: 2 ports detected
[    5.155403] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.155418] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.155426] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.155596] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.155645] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060
[    5.155720] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.155726] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.155732] usb usb3: Product: UHCI Host Controller
[    5.155737] usb usb3: Manufacturer: Linux 2.6.37.6 uhci_hcd
[    5.155742] usb usb3: SerialNumber: 0000:00:1d.1
[    5.156140] hub 3-0:1.0: USB hub found
[    5.156152] hub 3-0:1.0: 2 ports detected
[    5.156432] uhci_hcd 0000:00:1d.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.156446] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.156453] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.156627] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.156674] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040
[    5.156748] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.156754] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.156760] usb usb4: Product: UHCI Host Controller
[    5.156765] usb usb4: Manufacturer: Linux 2.6.37.6 uhci_hcd
[    5.156770] usb usb4: SerialNumber: 0000:00:1d.2
[    5.157170] hub 4-0:1.0: USB hub found
[    5.157181] hub 4-0:1.0: 2 ports detected
[    5.157455] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    5.157469] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    5.157477] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.157644] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    5.157693] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020
[    5.157766] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.157773] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.157779] usb usb5: Product: UHCI Host Controller
[    5.157784] usb usb5: Manufacturer: Linux 2.6.37.6 uhci_hcd
[    5.157789] usb usb5: SerialNumber: 0000:00:1d.3
[    5.158175] hub 5-0:1.0: USB hub found
[    5.158186] hub 5-0:1.0: 2 ports detected
[    5.158656] sl811: driver sl811-hcd, 19 May 2005
[    5.158742] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[    5.159190] Initializing USB Mass Storage driver...
[    5.159345] usbcore: registered new interface driver usb-storage
[    5.159350] USB Mass Storage support registered.
[    5.159445] usbcore: registered new interface driver ums-alauda
[    5.159542] usbcore: registered new interface driver ums-cypress
[    5.159640] usbcore: registered new interface driver ums-datafab
[    5.159736] usbcore: registered new interface driver ums-freecom
[    5.159833] usbcore: registered new interface driver ums-isd200
[    5.159930] usbcore: registered new interface driver ums-jumpshot
[    5.160048] usbcore: registered new interface driver ums-karma
[    5.160147] usbcore: registered new interface driver ums-onetouch
[    5.160245] usbcore: registered new interface driver ums-sddr09
[    5.160342] usbcore: registered new interface driver ums-sddr55
[    5.160440] usbcore: registered new interface driver ums-usbat
[    5.160666] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    5.165594] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.165606] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.166240] mice: PS/2 mouse device common for all mice
[    5.166351] md: linear personality registered for level -1
[    5.166357] md: raid0 personality registered for level 0
[    5.166361] md: raid1 personality registered for level 1
[    5.166366] md: raid10 personality registered for level 10
[    5.166371] md: raid6 personality registered for level 6
[    5.166375] md: raid5 personality registered for level 5
[    5.166379] md: raid4 personality registered for level 4
[    5.166384] md: multipath personality registered for level -4
[    5.166711] device-mapper: uevent: version 1.0.3
[    5.167146] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[    5.167673] cpuidle: using governor ladder
[    5.167837] input: Speakup as /devices/virtual/input/input0
[    5.167901] speakup 3.1.6: initialized
[    5.167912] synth name on entry is: (null)
[    5.168099] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    5.168427] TCP cubic registered
[    5.168432] Initializing XFRM netlink socket
[    5.168452] NET: Registered protocol family 17
[    5.168487] Registering the dns_resolver key type
[    5.168530] Using IPI Shortcut mode
[    5.292711] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    5.298584] registered taskstats version 1
[    5.299316] md: Waiting for all devices to be available before autodetect
[    5.299322] md: If you don't use raid, use raid=noautodetect
[    5.299727] md: Autodetecting RAID arrays.
[    5.299733] md: Scanned 0 and added 0 devices.
[    5.299736] md: autorun ...
[    5.299739] md: ... autorun DONE.
[    5.300768] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    5.301216] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    5.322606] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.322631] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[    5.337064] devtmpfs: mounted
[    5.337097] Freeing unused kernel memory: 588k freed
[    5.337432] Write protecting the kernel text: 9740k
[    5.337501] Write protecting the kernel read-only data: 2512k
[    5.455042] usb 1-8: new high speed USB device using ehci_hcd and address 2
[    5.589505] usb 1-8: New USB device found, idVendor=04f2, idProduct=b1eb
[    5.589514] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.589521] usb 1-8: Product: HP Webcam
[    5.589525] usb 1-8: Manufacturer: Chicony Corp.
[    6.570688] udev[1197]: starting version 165
[    6.903437] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.046164] Linux agpgart interface v0.103
[    7.124052] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    7.416549] wmi: Mapper loaded
[    7.434332] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.473632] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    7.473860] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    7.490496] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    7.544254] ACPI: AC Adapter [AC] (on-line)
[    7.581659] ACPI: EC: GPE storm detected, transactions will use polling mode
[    7.581823] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    7.609249] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20101013/nspredef-456)
[    7.609265] ACPI: [Package] has zero elements (f5f91540)
[    7.609340] ACPI: Invalid active0 threshold
[    7.672605] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    7.672650] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.672763] r8169 0000:01:00.0: setting latency timer to 64
[    7.672782] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
[    7.672966] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[    7.679979] ACPI: acpi_idle yielding to intel_idle
[    7.681237] r8169 0000:01:00.0: eth0: RTL8101e at 0xf85ec000, 68:b5:99:db:3c:1f, XID 04000000 IRQ 41
[    7.704914] Linux video capture interface: v2.00
[    7.894122] thermal LNXTHERM:00: registered as thermal_zone0
[    7.894130] ACPI: Thermal Zone [THRM] (53 C)
[    7.964383] ACPI: Battery Slot [BAT0] (battery present)
[    7.964588] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    7.964721] ACPI: Power Button [PWRB]
[    7.964832] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    7.977193] ACPI: Lid Switch [LID0]
[    7.977389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.977514] ACPI: Power Button [PWRF]
[    8.051902] input: HP WMI hotkeys as /devices/virtual/input/input5
[    8.062597] rtc_cmos 00:03: RTC can wake from S4
[    8.068208] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    8.068249] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    8.201150] cfg80211: Calling CRDA to update world regulatory domain
[    8.279040] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b1eb)
[    8.287640] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input6
[    8.288402] usbcore: registered new interface driver uvcvideo
[    8.288409] USB Video Class driver (v1.0.0)
[    8.462105] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0xa0400
[    8.535802] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    8.584385] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.584494] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    8.584527] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.676498] [drm] Initialized drm 1.1.0 20060810
[    8.732664] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.733041] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.870445] brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
[    8.892555] brcm80211 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.892572] brcm80211 0000:02:00.0: setting latency timer to 64
[    8.996257] i915 0000:00:02.0: power state changed by ACPI to D0
[    8.996275] i915 0000:00:02.0: power state changed by ACPI to D0
[    8.996288] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.996297] i915 0000:00:02.0: setting latency timer to 64
[    9.048968] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    9.103798] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.104243] [drm] initialized overlay support
[    9.140332] brcm80211: fail to load firmware brcm/bcm43xx-0.fw
[    9.140340] brcm80211: Failed to find firmware usually in /lib/firmware/brcm
[    9.140362] brcm80211 0000:02:00.0: PCI INT A disabled
[    9.140389] brcm80211: wl_pci_probe: wl_attach failed!
[    9.174933] lib80211: common routines for IEEE802.11 drivers
[    9.174942] lib80211_crypt: registered algorithm 'NULL'
[    9.233755] wl: version magic '2.6.37.6-smp SMP mod_unload 686 ' should be '2.6.37.6 mod_unload 486 '
[    9.401918] Console: switching to colour frame buffer device 128x37
[    9.408567] fb0: inteldrmfb frame buffer device
[    9.408572] drm: registered panic notifier
[    9.413743] acpi device:21: registered as cooling_device1
[    9.415680] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    9.415947] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    9.416846] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.521437] Adding 1028156k swap on /dev/sda2.  Priority:-1 extents:1 across:1028156k
[    9.612492] fuse init (API version 7.15)
[   10.118952] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.201063] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.863496] ppdev: user-space parallel port driver
[   10.866236] lp: driver loaded but no devices found
[   10.947353] powernow: This module only works with AMD K7 CPUs
[   11.007658] cpufreq-nforce2: No nForce2 chipset.
[   14.405831] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   19.374231] NET: Registered protocol family 10
[   19.374575] lo: Disabled Privacy Extensions
[   28.041195] r8169 0000:01:00.0: eth0: link down
[   28.041668] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  110.172080] start_kdeinit (2107): /proc/2107/oom_adj is deprecated, please use /proc/2107/oom_score_adj instead.
[  115.285663] ata1.00: configured for UDMA/133
[  115.285675] ata1: EH complete
[  115.755710] EXT4-fs (sda1): re-mounted. Opts: commit=0
[  115.881871] EXT4-fs (sda3): re-mounted. Opts: commit=0
[  189.751043] usb 1-2: new high speed USB device using ehci_hcd and address 3
[  189.867251] usb 1-2: New USB device found, idVendor=1307, idProduct=0163
[  189.867264] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  189.867275] usb 1-2: Product: USB Mass Storage Device
[  189.867283] usb 1-2: Manufacturer: USBest Technology
[  189.867291] usb 1-2: SerialNumber: 071028a70931c0
[  189.872545] scsi8 : usb-storage 1-2:1.0
[  190.880227] scsi 8:0:0:0: Direct-Access     Ut163    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[  190.880884] sd 8:0:0:0: Attached scsi generic sg1 type 0
[  190.886482] sd 8:0:0:0: [sdb] 3948543 512-byte logical blocks: (2.02 GB/1.88 GiB)
[  190.888836] sd 8:0:0:0: [sdb] Write Protect is off
[  190.888850] sd 8:0:0:0: [sdb] Mode Sense: 00 00 00 00
[  190.888860] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[  190.894459] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[  191.002660]  sdb: sdb1
[  191.006829] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[  191.006839] sd 8:0:0:0: [sdb] Attached SCSI removable disk


Però ancora wicd mi ignora. Come continuare?

[DrSlump]

Io faccio le cose a casaccio, evidentemente.

Per questo d'ora in poi starò buono buonino a seguire i vostri consigli.
Ho dato gli ultimi due comandi consigliati da rik70.

Rimetto dmesg

Codice: Seleziona tutto

 
root[leonardo]# dmesg
w]
[    0.608570] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.608576] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.608582] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.608588] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.608814] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.609176] pnp 00:01: [io  0x002e-0x002f]
[    0.609182] pnp 00:01: [io  0x004e-0x004f]
[    0.609187] pnp 00:01: [io  0x0061]
[    0.609192] pnp 00:01: [io  0x0070]
[    0.609196] pnp 00:01: [io  0x0080]
[    0.609201] pnp 00:01: [io  0x0092]
[    0.609206] pnp 00:01: [io  0x00b2-0x00b3]
[    0.609210] pnp 00:01: [io  0x0063]
[    0.609215] pnp 00:01: [io  0x0065]
[    0.609219] pnp 00:01: [io  0x0067]
[    0.609224] pnp 00:01: [io  0x0600-0x060f]
[    0.609229] pnp 00:01: [io  0x0610]
[    0.609235] pnp 00:01: [io  0x0800-0x080f]
[    0.609245] pnp 00:01: [io  0x0810-0x0817]
[    0.609250] pnp 00:01: [io  0x0400-0x047f]
[    0.609255] pnp 00:01: [io  0x0500-0x053f]
[    0.609261] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.609266] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.609272] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.609277] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.609282] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.609288] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.609293] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.609523] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.609553] pnp 00:02: [io  0x0000-0x001f]
[    0.609559] pnp 00:02: [io  0x0081-0x0091]
[    0.609564] pnp 00:02: [io  0x0093-0x009f]
[    0.609569] pnp 00:02: [io  0x00c0-0x00df]
[    0.609575] pnp 00:02: [dma 4]
[    0.609710] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.609781] pnp 00:03: [io  0x0070-0x0077]
[    0.609913] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.610108] pnp 00:04: [irq 0 disabled]
[    0.610127] pnp 00:04: [irq 8]
[    0.610133] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.610270] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.610303] pnp 00:05: [io  0x00f0]
[    0.610313] pnp 00:05: [irq 13]
[    0.610444] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.610475] pnp 00:06: [mem 0xff800000-0xffffffff]
[    0.610607] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.610664] pnp 00:07: [io  0x0060]
[    0.610669] pnp 00:07: [io  0x0064]
[    0.610680] pnp 00:07: [irq 1]
[    0.610813] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.610863] pnp 00:08: [irq 12]
[    0.611018] pnp 00:08: Plug and Play ACPI device, IDs SYN1e33 SYN1e00 SYN0002 PNP0f13 (active)
[    0.611172] pnp: PnP ACPI: found 9 devices
[    0.611177] ACPI: ACPI bus type pnp unregistered
[    0.611202] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.611208] system 00:01: [io  0x0610] has been reserved
[    0.611215] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.611221] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.611228] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.611235] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.611243] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.611251] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.611258] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.611265] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.611272] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.611279] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.611287] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.655741] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.655750] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.655761] pci 0000:00:1c.0:   bridge window [mem 0x53000000-0x53ffffff]
[    0.655771] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.655782] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.655788] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.655798] pci 0000:00:1c.1:   bridge window [mem 0x52000000-0x52ffffff]
[    0.655807] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.655818] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.655822] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.655831] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.655839] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.655871] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.655881] pci 0000:00:1c.0: setting latency timer to 64
[    0.655897] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.655906] pci 0000:00:1c.1: setting latency timer to 64
[    0.655918] pci 0000:00:1e.0: setting latency timer to 64
[    0.655934] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.655940] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.655946] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.655953] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.655959] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.655965] pci_bus 0000:01: resource 1 [mem 0x53000000-0x53ffffff]
[    0.655971] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.655978] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.655983] pci_bus 0000:02: resource 1 [mem 0x52000000-0x52ffffff]
[    0.655990] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.655997] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.656003] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.656009] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.656016] pci_bus 0000:03: resource 7 [mem 0x40000000-0xfebfffff]
[    0.656069] NET: Registered protocol family 2
[    0.656131] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.656388] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.657341] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.657589] TCP: Hash tables configured (established 131072 bind 65536)
[    0.657595] TCP reno registered
[    0.657604] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.657618] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.657774] NET: Registered protocol family 1
[    0.657963] RPC: Registered udp transport module.
[    0.657969] RPC: Registered tcp transport module.
[    0.657973] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.657997] pci 0000:00:02.0: Boot video device
[    0.668982] PCI: CLS 64 bytes, default 64
[    0.669271] Simple Boot Flag at 0x44 set to 0x1
[    0.670859] audit: initializing netlink socket (disabled)
[    0.670881] type=2000 audit(1327610552.668:1): initialized
[    0.671084] highmem bounce pool size: 64 pages
[    0.678955] VFS: Disk quotas dquot_6.5.2
[    0.679103] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.679733] DLM (built Apr 10 2011 00:58:34) installed
[    0.682308] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.682798] NTFS driver 2.1.29 [Flags: R/W].
[    0.683150] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.683665] JFS: nTxBlock = 7874, nTxLock = 62994
[    0.687591] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.688832] SGI XFS Quota Management subsystem
[    0.688850] OCFS2 1.5.0
[    0.689150] ocfs2: Registered cluster interface o2cb
[    0.689300] ocfs2: Registered cluster interface user
[    0.689306] OCFS2 DLMFS 1.5.0
[    0.689481] OCFS2 User DLM kernel interface loaded
[    0.689486] OCFS2 Node Manager 1.5.0
[    0.689690] OCFS2 DLM 1.5.0
[    0.690364] Btrfs loaded
[    0.691189] GFS2 (built Apr 10 2011 01:00:12) installed
[    0.691207] msgmni has been set to 1720
[    0.693122] async_tx: api initialized (async)
[    0.693251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.693295] io scheduler noop registered
[    0.693300] io scheduler deadline registered
[    0.693360] io scheduler cfq registered (default)
[    0.693779] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20101013/nspredef-352)
[    0.693799] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.693803] _OSC request data:1 0 1d
[    0.693992] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20101013/nspredef-352)
[    0.694008] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.694012] _OSC request data:1 0 1d
[    0.694370] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.694833] intel_idle: MWAIT substates: 0x20220
[    0.694838] intel_idle: v0.4 model 0x1C
[    0.694842] intel_idle: lapic_timer_reliable_states 0x2
[    0.694853] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.695015] Switching to clocksource hpet
[    0.695147] ERST: Table is not found!
[    0.695182] isapnp: Scanning for PnP cards...
[    1.051916] isapnp: No Plug & Play device found
[    1.061432] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.074026] floppy0: no floppy controllers found
[    4.078859] brd: module loaded
[    4.081287] loop: module loaded
[    4.081292] Compaq SMART2 Driver (v 2.6.0)
[    4.081473] HP CISS Driver (v 3.6.26)
[    4.082913] Loading iSCSI transport class v2.0-870.
[    4.084037] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[    4.087860] Adaptec aacraid driver 1.1-5[26400]-ms
[    4.088235] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    4.088715] scsi: <fdomain> Detection failed (no card)
[    4.088726] sym53c416.c: Version 1.0.0-ac
[    4.088754] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[    4.088897] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[    4.089168] iscsi: registered transport (qla4xxx)
[    4.089267] QLogic iSCSI HBA Driver
[    4.089271] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[    4.089276] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    4.089386] Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.0
[    4.111025] Failed initialization of WD-7000 SCSI card!
[    4.206098] DC390: clustering now enabled by default. If you get problems load
[    4.206104]        with "disable_clustering=1" and report to maintainers
[    4.206312] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    4.206481] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    4.206584] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[    4.206703] mpt2sas version 06.100.00.00 loaded
[    4.207066] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    4.207352] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    4.207450] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.207551] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    4.207652] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[    4.207760] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    4.207860] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    4.208267] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[    4.208749] ahci 0000:00:1f.2: version 3.0
[    4.208774] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.208850] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    4.208914] ahci: SSS flag set, parallel bus scan disabled
[    4.208962] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    4.208971] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[    4.208981] ahci 0000:00:1f.2: setting latency timer to 64
[    4.211369] scsi2 : ahci
[    4.211757] scsi3 : ahci
[    4.212070] scsi4 : ahci
[    4.212358] scsi5 : ahci
[    4.212906] ata1: SATA max UDMA/133 abar m1024@0x54204000 port 0x54204100 irq 40
[    4.212915] ata2: SATA max UDMA/133 abar m1024@0x54204000 port 0x54204180 irq 40
[    4.212920] ata3: DUMMY
[    4.212924] ata4: DUMMY
[    4.220506] scsi6 : pata_legacy
[    4.220749] ata5: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    4.673030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.674527] ata1.00: unexpected _GTF length (4)
[    4.674845] ata1.00: ATA-8: ST9160314AS, 0001SDM1, max UDMA/133
[    4.674852] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.676688] ata1.00: unexpected _GTF length (4)
[    4.677054] ata1.00: configured for UDMA/133
[    4.677257] scsi 2:0:0:0: Direct-Access     ATA      ST9160314AS      0001 PQ: 0 ANSI: 5
[    4.677864] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    4.677993] sd 2:0:0:0: [sda] Write Protect is off
[    4.678001] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.678087] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.709189]  sda: sda1 sda2 sda3
[    4.710090] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.984037] ata2: SATA link down (SStatus 0 SControl 300)
[    4.985821] scsi7 : pata_legacy
[    4.986084] ata6: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    5.137889] I2O subsystem v1.325
[    5.137895] i2o: max drivers = 8
[    5.138240] I2O Configuration OSM v1.323
[    5.138321] I2O Bus Adapter OSM v1.317
[    5.138402] I2O Block Device OSM v1.325
[    5.138711] I2O SCSI Peripheral OSM v1.316
[    5.138795] I2O ProcFS OSM v1.316
[    5.138886] Fusion MPT base driver 3.04.17
[    5.138891] Copyright (c) 1999-2008 LSI Corporation
[    5.138902] Fusion MPT SPI Host driver 3.04.17
[    5.139046] Fusion MPT FC Host driver 3.04.17
[    5.139168] Fusion MPT SAS Host driver 3.04.17
[    5.139286] Fusion MPT misc device (ioctl) driver 3.04.17
[    5.139457] mptctl: Registered with Fusion MPT base driver
[    5.139463] mptctl: /dev/mptctl @ (major,minor=10,220)
[    5.139468] Fusion MPT LAN driver 3.04.17
[    5.139716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.139775] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.139811] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    5.139818] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.140033] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.140083] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    5.140101] ehci_hcd 0000:00:1d.7: debug port 1
[    5.143988] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    5.144048] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x54204400
[    5.153025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.153090] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.153098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.153104] usb usb1: Product: EHCI Host Controller
[    5.153109] usb usb1: Manufacturer: Linux 2.6.37.6 ehci_hcd
[    5.153114] usb usb1: SerialNumber: 0000:00:1d.7
[    5.153482] hub 1-0:1.0: USB hub found
[    5.153494] hub 1-0:1.0: 8 ports detected
[    5.153940] 116x: driver isp116x-hcd, 03 Nov 2005
[    5.154048] driver isp1362-hcd, 2005-04-04
[    5.154130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.154251] uhci_hcd: USB Universal Host Controller Interface driver
[    5.154355] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.154370] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.154378] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.154574] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.154617] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[    5.154693] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.154700] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.154706] usb usb2: Product: UHCI Host Controller
[    5.154711] usb usb2: Manufacturer: Linux 2.6.37.6 uhci_hcd
[    5.154716] usb usb2: SerialNumber: 0000:00:1d.0
[    5.155111] hub 2-0:1.0: USB hub found
[    5.155122] hub 2-0:1.0: 2 ports detected
[    5.155403] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.155418] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.155426] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.155596] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.155645] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060
[    5.155720] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.155726] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.155732] usb usb3: Product: UHCI Host Controller
[    5.155737] usb usb3: Manufacturer: Linux 2.6.37.6 uhci_hcd
[    5.155742] usb usb3: SerialNumber: 0000:00:1d.1
[    5.156140] hub 3-0:1.0: USB hub found
[    5.156152] hub 3-0:1.0: 2 ports detected
[    5.156432] uhci_hcd 0000:00:1d.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.156446] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.156453] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.156627] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.156674] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040
[    5.156748] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.156754] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.156760] usb usb4: Product: UHCI Host Controller
[    5.156765] usb usb4: Manufacturer: Linux 2.6.37.6 uhci_hcd
[    5.156770] usb usb4: SerialNumber: 0000:00:1d.2
[    5.157170] hub 4-0:1.0: USB hub found
[    5.157181] hub 4-0:1.0: 2 ports detected
[    5.157455] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    5.157469] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    5.157477] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.157644] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    5.157693] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020
[    5.157766] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.157773] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.157779] usb usb5: Product: UHCI Host Controller
[    5.157784] usb usb5: Manufacturer: Linux 2.6.37.6 uhci_hcd
[    5.157789] usb usb5: SerialNumber: 0000:00:1d.3
[    5.158175] hub 5-0:1.0: USB hub found
[    5.158186] hub 5-0:1.0: 2 ports detected
[    5.158656] sl811: driver sl811-hcd, 19 May 2005
[    5.158742] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[    5.159190] Initializing USB Mass Storage driver...
[    5.159345] usbcore: registered new interface driver usb-storage
[    5.159350] USB Mass Storage support registered.
[    5.159445] usbcore: registered new interface driver ums-alauda
[    5.159542] usbcore: registered new interface driver ums-cypress
[    5.159640] usbcore: registered new interface driver ums-datafab
[    5.159736] usbcore: registered new interface driver ums-freecom
[    5.159833] usbcore: registered new interface driver ums-isd200
[    5.159930] usbcore: registered new interface driver ums-jumpshot
[    5.160048] usbcore: registered new interface driver ums-karma
[    5.160147] usbcore: registered new interface driver ums-onetouch
[    5.160245] usbcore: registered new interface driver ums-sddr09
[    5.160342] usbcore: registered new interface driver ums-sddr55
[    5.160440] usbcore: registered new interface driver ums-usbat
[    5.160666] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    5.165594] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.165606] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.166240] mice: PS/2 mouse device common for all mice
[    5.166351] md: linear personality registered for level -1
[    5.166357] md: raid0 personality registered for level 0
[    5.166361] md: raid1 personality registered for level 1
[    5.166366] md: raid10 personality registered for level 10
[    5.166371] md: raid6 personality registered for level 6
[    5.166375] md: raid5 personality registered for level 5
[    5.166379] md: raid4 personality registered for level 4
[    5.166384] md: multipath personality registered for level -4
[    5.166711] device-mapper: uevent: version 1.0.3
[    5.167146] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[    5.167673] cpuidle: using governor ladder
[    5.167837] input: Speakup as /devices/virtual/input/input0
[    5.167901] speakup 3.1.6: initialized
[    5.167912] synth name on entry is: (null)
[    5.168099] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    5.168427] TCP cubic registered
[    5.168432] Initializing XFRM netlink socket
[    5.168452] NET: Registered protocol family 17
[    5.168487] Registering the dns_resolver key type
[    5.168530] Using IPI Shortcut mode
[    5.292711] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    5.298584] registered taskstats version 1
[    5.299316] md: Waiting for all devices to be available before autodetect
[    5.299322] md: If you don't use raid, use raid=noautodetect
[    5.299727] md: Autodetecting RAID arrays.
[    5.299733] md: Scanned 0 and added 0 devices.
[    5.299736] md: autorun ...
[    5.299739] md: ... autorun DONE.
[    5.300768] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    5.301216] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    5.322606] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.322631] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[    5.337064] devtmpfs: mounted
[    5.337097] Freeing unused kernel memory: 588k freed
[    5.337432] Write protecting the kernel text: 9740k
[    5.337501] Write protecting the kernel read-only data: 2512k
[    5.455042] usb 1-8: new high speed USB device using ehci_hcd and address 2
[    5.589505] usb 1-8: New USB device found, idVendor=04f2, idProduct=b1eb
[    5.589514] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.589521] usb 1-8: Product: HP Webcam
[    5.589525] usb 1-8: Manufacturer: Chicony Corp.
[    6.570688] udev[1197]: starting version 165
[    6.903437] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.046164] Linux agpgart interface v0.103
[    7.124052] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    7.416549] wmi: Mapper loaded
[    7.434332] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.473632] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    7.473860] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    7.490496] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    7.544254] ACPI: AC Adapter [AC] (on-line)
[    7.581659] ACPI: EC: GPE storm detected, transactions will use polling mode
[    7.581823] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    7.609249] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20101013/nspredef-456)
[    7.609265] ACPI: [Package] has zero elements (f5f91540)
[    7.609340] ACPI: Invalid active0 threshold
[    7.672605] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    7.672650] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.672763] r8169 0000:01:00.0: setting latency timer to 64
[    7.672782] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
[    7.672966] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[    7.679979] ACPI: acpi_idle yielding to intel_idle
[    7.681237] r8169 0000:01:00.0: eth0: RTL8101e at 0xf85ec000, 68:b5:99:db:3c:1f, XID 04000000 IRQ 41
[    7.704914] Linux video capture interface: v2.00
[    7.894122] thermal LNXTHERM:00: registered as thermal_zone0
[    7.894130] ACPI: Thermal Zone [THRM] (53 C)
[    7.964383] ACPI: Battery Slot [BAT0] (battery present)
[    7.964588] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    7.964721] ACPI: Power Button [PWRB]
[    7.964832] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    7.977193] ACPI: Lid Switch [LID0]
[    7.977389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.977514] ACPI: Power Button [PWRF]
[    8.051902] input: HP WMI hotkeys as /devices/virtual/input/input5
[    8.062597] rtc_cmos 00:03: RTC can wake from S4
[    8.068208] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    8.068249] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    8.201150] cfg80211: Calling CRDA to update world regulatory domain
[    8.279040] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b1eb)
[    8.287640] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input6
[    8.288402] usbcore: registered new interface driver uvcvideo
[    8.288409] USB Video Class driver (v1.0.0)
[    8.462105] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0xa0400
[    8.535802] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    8.584385] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.584494] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    8.584527] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.676498] [drm] Initialized drm 1.1.0 20060810
[    8.732664] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.733041] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.870445] brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
[    8.892555] brcm80211 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.892572] brcm80211 0000:02:00.0: setting latency timer to 64
[    8.996257] i915 0000:00:02.0: power state changed by ACPI to D0
[    8.996275] i915 0000:00:02.0: power state changed by ACPI to D0
[    8.996288] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.996297] i915 0000:00:02.0: setting latency timer to 64
[    9.048968] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    9.103798] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.104243] [drm] initialized overlay support
[    9.140332] brcm80211: fail to load firmware brcm/bcm43xx-0.fw
[    9.140340] brcm80211: Failed to find firmware usually in /lib/firmware/brcm
[    9.140362] brcm80211 0000:02:00.0: PCI INT A disabled
[    9.140389] brcm80211: wl_pci_probe: wl_attach failed!
[    9.174933] lib80211: common routines for IEEE802.11 drivers
[    9.174942] lib80211_crypt: registered algorithm 'NULL'
[    9.233755] wl: version magic '2.6.37.6-smp SMP mod_unload 686 ' should be '2.6.37.6 mod_unload 486 '
[    9.401918] Console: switching to colour frame buffer device 128x37
[    9.408567] fb0: inteldrmfb frame buffer device
[    9.408572] drm: registered panic notifier
[    9.413743] acpi device:21: registered as cooling_device1
[    9.415680] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    9.415947] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    9.416846] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.521437] Adding 1028156k swap on /dev/sda2.  Priority:-1 extents:1 across:1028156k
[    9.612492] fuse init (API version 7.15)
[   10.118952] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.201063] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.863496] ppdev: user-space parallel port driver
[   10.866236] lp: driver loaded but no devices found
[   10.947353] powernow: This module only works with AMD K7 CPUs
[   11.007658] cpufreq-nforce2: No nForce2 chipset.
[   14.405831] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   19.374231] NET: Registered protocol family 10
[   19.374575] lo: Disabled Privacy Extensions
[   28.041195] r8169 0000:01:00.0: eth0: link down
[   28.041668] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  110.172080] start_kdeinit (2107): /proc/2107/oom_adj is deprecated, please use /proc/2107/oom_score_adj instead.
[  115.285663] ata1.00: configured for UDMA/133
[  115.285675] ata1: EH complete
[  115.755710] EXT4-fs (sda1): re-mounted. Opts: commit=0
[  115.881871] EXT4-fs (sda3): re-mounted. Opts: commit=0
[  189.751043] usb 1-2: new high speed USB device using ehci_hcd and address 3
[  189.867251] usb 1-2: New USB device found, idVendor=1307, idProduct=0163
[  189.867264] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  189.867275] usb 1-2: Product: USB Mass Storage Device
[  189.867283] usb 1-2: Manufacturer: USBest Technology
[  189.867291] usb 1-2: SerialNumber: 071028a70931c0
[  189.872545] scsi8 : usb-storage 1-2:1.0
[  190.880227] scsi 8:0:0:0: Direct-Access     Ut163    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[  190.880884] sd 8:0:0:0: Attached scsi generic sg1 type 0
[  190.886482] sd 8:0:0:0: [sdb] 3948543 512-byte logical blocks: (2.02 GB/1.88 GiB)
[  190.888836] sd 8:0:0:0: [sdb] Write Protect is off
[  190.888850] sd 8:0:0:0: [sdb] Mode Sense: 00 00 00 00
[  190.888860] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[  190.894459] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[  191.002660]  sdb: sdb1
[  191.006829] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[  191.006839] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[  343.303603] usb 1-2: USB disconnect, address 3
[ 1602.501718] cfg80211: Calling CRDA to update world regulatory domain
[ 1602.600474] brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
[ 1602.622723] brcm80211 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1602.622742] brcm80211 0000:02:00.0: setting latency timer to 64
[ 1602.626333] brcm80211: fail to load firmware brcm/bcm43xx-0.fw
[ 1602.626342] brcm80211: Failed to find firmware usually in /lib/firmware/brcm
[ 1602.626365] brcm80211 0000:02:00.0: PCI INT A disabled
[ 1602.626389] brcm80211: wl_pci_probe: wl_attach failed!
[ 1832.079045] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 1832.195268] usb 1-2: New USB device found, idVendor=1307, idProduct=0163
[ 1832.195282] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1832.195293] usb 1-2: Product: USB Mass Storage Device
[ 1832.195301] usb 1-2: Manufacturer: USBest Technology
[ 1832.195309] usb 1-2: SerialNumber: 071028a70931c0
[ 1832.200595] scsi9 : usb-storage 1-2:1.0
[ 1833.208244] scsi 9:0:0:0: Direct-Access     Ut163    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[ 1833.208899] sd 9:0:0:0: Attached scsi generic sg1 type 0
[ 1833.214216] sd 9:0:0:0: [sdb] 3948543 512-byte logical blocks: (2.02 GB/1.88 GiB)
[ 1833.216367] sd 9:0:0:0: [sdb] Write Protect is off
[ 1833.216383] sd 9:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1833.216392] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 1833.221978] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 1833.330421]  sdb: sdb1
[ 1833.335185] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 1833.335195] sd 9:0:0:0: [sdb] Attached SCSI removable disk


[miklos]

continua a non caricare il firmware

Codice: Seleziona tutto

[    9.140332] brcm80211: fail to load firmware brcm/bcm43xx-0.fw
[    9.140340] brcm80211: Failed to find firmware usually in /lib/firmware/brcm
[    9.140362] brcm80211 0000:02:00.0: PCI INT A disabled
[    9.140389] brcm80211: wl_pci_probe: wl_attach failed!

fai un controllo nella directory /lib/firmware e vedi se hai copiato correttamente il tutto, se hai seguito il mio consiglio o quello di rik70 il risultato dovrebbe essere identico.
vista la problematica, secondo il mio modesto parere nn conviene aggiornare alla current

[rik70]

Uhm.....

prova a dare:

Codice: Seleziona tutto

ls /lib/firmware/brcm

e dicci che salta fuori, please.

[DrSlump]

@miklos
Dovrebbe esserci tutto. Ho seguito esattamente le tue istruzioni.

@rik70

Codice: Seleziona tutto

root[leonardo]# ls /lib/firmware/brcm
bcm43xx-0.fw-610.809.0  bcm43xx_hdr-0.fw-610.809.0

[targzeta]

Prova a rinominare entrambi i file eliminando la parte finale '-610.809.0'. Senza riavviare, non serve, devi dare:

Codice: Seleziona tutto

modprobe -r brcm80211
dmesg -c
modprobe brcm80211

e poi ci riposti l'output del SOLO comando:

Codice: Seleziona tutto

dmesg

l'altra volta ci hai postato tutto .

Emanuele

[targzeta]

Aspettate un attimo. Ma voi siete sicuri che il firmware non ci sia. Nella mia Slackware (che però è una current) il firmware in questione si trova nel pacchetto kernel-firmware. DrSlump, sei sicuro che il pacchetto citato ce l'hai installato?

Emanuele

Nel kernel-firmware della 13.37 non c'è, in current come hai detto tu sì.

A questo punto mi chiedo: anziché prendere i firmware da debian o dal git del kernel, non potrà direttamente installare/aggiornare il pacchetto da current? Forse è la cosa + semplice.

Allora forse la cosa si spiega, avendo anche quel firmware non capivo cosa potesse non andare. Però è simpatico che Pat abbia compilato il modulo ma non inserito il firmware .

Per la tua domanda, forse si, in effetti i firmware dovrebbero dipendere poco dal modulo che lo usa, anche se a volte il firmware aggiunge o toglie funzioni che poi il modulo deve saper gestire. Se la soluzione che ho postato prima non dovesse funzionare, si potrebbe sempre passare tutto il kernel alla current: immagine, moduli e firmware.

Emanuele

[DrSlump]

Prova a rinominare entrambi i file eliminando la parte finale '-610.809.0'. Senza riavviare, non serve, devi dare:

Codice: Seleziona tutto

modprobe -r brcm80211
dmesg -c
modprobe brcm80211

e poi ci riposti l'output del SOLO comando:

Codice: Seleziona tutto

dmesg

l'altra volta ci hai postato tutto .

Emanuele

Ok, ho fatto!

Codice: Seleziona tutto

root[brcm]# dmesg
[ 2704.079695] cfg80211: Calling CRDA to update world regulatory domain
[ 2704.179578] brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
[ 2704.200743] brcm80211 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2704.200763] brcm80211 0000:02:00.0: setting latency timer to 64
[ 2704.253346] Found chip type AI (0x13814313)
[ 2704.258188] Changing max_res_mask to 0xffff
[ 2704.258196] Changing min_res_mask to 0x200d
[ 2704.264336] Applying 4313 WARs
[ 2704.265525] wlc_bmac_attach:: deviceid 0x4727 nbands 1 board 0x145c macaddr: ac:81:12:19:59:b0
[ 2704.307603] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2704.307938] wl_set_hint: Sending country code US to MAC80211
[ 2704.307950] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver 5.75.11 (1.82.8.0) (Compiled in . at 00:25:55 on Apr 10 2011)
[ 2704.308657] cfg80211: Calling CRDA for country: US