Repository 32bit  Forum
Repository 64bit  Wiki

Problema mouse USB

Se avete problemi con l'installazione e la configurazione di Slackware postate qui. Non usate questo forum per argomenti generali... per quelli usate Gnu/Linux in genere.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

Problema mouse USB

Messaggioda whiteking » mer mag 23, 2012 14:38

Salve a tutti!
Sono abbastanza nubbio sul mondo linux in generale ma mi affascina moltissimo e sia per esigenze lavorative che didattiche stò pian piano aumentando le mie conoscenza.
Sono ormai 15 giorni che sono in fissa con un problema che non riesco a risolvere nemmeno googlando.
Ho questo portatile un poco datado su cui è stata installata (non da me) una 13.37 con gnome il tutto funziona egreggiamente se non che colelgando un mouse USB di qualsiasi marca e modello questo viene riconosciuto ma muovendolo fisicamente il puntatore resta immobile o si sposta di pochi cm, in più vorrei disattivare definitivamente il touchpad che funziona con synaptics (questa cosa mi sarebbe utlie anche su altri pc).
Ho cercato anche qua sul forum ma trovo solamente su come disattivare il tap temporaneamente o cose comunque temporanee.
Se qualcuno saprà almeno indicarmi la strada gliene sarò eternamente grato!
Mi scuso in anticipo se per caso non sono stato ababstanza abile nella ricerca precedente.
Ultima modifica di whiteking il mer mag 23, 2012 15:34, modificato 1 volta in totale.
whiteking
Linux 1.0
Linux 1.0
 
Messaggi: 5
Iscritto il: mer mag 23, 2012 14:23

Re: Problema mouse USB

Messaggioda targzeta » mer mag 23, 2012 15:30

Come prima cosa ti consiglierei di passare ad una 13.37 perché il server X è cambiato molto dalla 13. Che ne dici?

Emanuele
Linux Registered User #454438
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
20/04/2013 - Io volevo Rodotà
Avatar utente
targzeta
Iper Master
Iper Master
 
Messaggi: 6185
Iscritto il: gio nov 03, 2005 14:05
Località: Carpignano Sal. (LE) <-> Pisa
Nome Cognome: Emanuele Tomasi
Slackware: current
Kernel: latest stable
Desktop: IceWM

Re: Problema mouse USB

Messaggioda whiteking » mer mag 23, 2012 15:34

spina ha scritto:Come prima cosa ti consiglierei di passare ad una 13.37 perché il server X è cambiato molto dalla 13. Che ne dici?

Emanuele

errore mio è già presente la 13.37 scusate edito.
whiteking
Linux 1.0
Linux 1.0
 
Messaggi: 5
Iscritto il: mer mag 23, 2012 14:23

Re: Problema mouse USB

Messaggioda targzeta » mer mag 23, 2012 15:40

Allora prova a fare così. Prima stacchi il mouse, quindi dai:
Codice: Seleziona tutto
dmesg -c
poi collega il mouse e, dopo un po', postaci l'output di:
Codice: Seleziona tutto
dmesg

Inoltre postaci anche il contenuto del file:
Codice: Seleziona tutto
/var/log/Xorg.log

Mi raccomando, usa i tag 'code' dell'editor per inserire l'output di questi comandi.

Emanuele
Linux Registered User #454438
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
20/04/2013 - Io volevo Rodotà
Avatar utente
targzeta
Iper Master
Iper Master
 
Messaggi: 6185
Iscritto il: gio nov 03, 2005 14:05
Località: Carpignano Sal. (LE) <-> Pisa
Nome Cognome: Emanuele Tomasi
Slackware: current
Kernel: latest stable
Desktop: IceWM

Re: Problema mouse USB

Messaggioda whiteking » ven mag 25, 2012 15:50

Scusa il ritardo ma ieri non avuto tempo per vedere questo pc.
Comunque dmesg -c senza mouse collegato
Codice: Seleziona tutto
] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.210606] pci 0000:00:10.0: PME# disabled
[    0.210628] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[    0.210671] pci 0000:00:10.1: reg 20: [io  0x1300-0x131f]
[    0.210702] pci 0000:00:10.1: supports D1 D2
[    0.210705] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.210710] pci 0000:00:10.1: PME# disabled
[    0.210738] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
[    0.210755] pci 0000:00:10.3: reg 10: [mem 0xf0000000-0xf00000ff]
[    0.210813] pci 0000:00:10.3: supports D1 D2
[    0.210817] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.210822] pci 0000:00:10.3: PME# disabled
[    0.210849] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
[    0.210908] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.210925] pci 0000:00:11.0: quirk: [io  0x1000-0x107f] claimed by vt8235 PM
[    0.210935] pci 0000:00:11.0: quirk: [io  0x1400-0x140f] claimed by vt8235 SMB
[    0.210997] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
[    0.211043] pci 0000:00:11.1: reg 20: [io  0x1100-0x110f]
[    0.211100] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[    0.211117] pci 0000:00:11.5: reg 10: [io  0xe100-0xe1ff]
[    0.211178] pci 0000:00:11.5: supports D1 D2
[    0.211200] pci 0000:00:11.6: [1106:3068] type 0 class 0x000780
[    0.211217] pci 0000:00:11.6: reg 10: [io  0xe200-0xe2ff]
[    0.211278] pci 0000:00:11.6: supports D1 D2
[    0.211301] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[    0.211318] pci 0000:00:12.0: reg 10: [io  0xe300-0xe3ff]
[    0.211329] pci 0000:00:12.0: reg 14: [mem 0xf0000100-0xf00001ff]
[    0.211381] pci 0000:00:12.0: supports D1 D2
[    0.211385] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.211390] pci 0000:00:12.0: PME# disabled
[    0.211448] pci 0000:01:00.0: [5333:8d04] type 0 class 0x000300
[    0.211464] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe007ffff]
[    0.211474] pci 0000:01:00.0: reg 14: [mem 0x90000000-0x97ffffff pref]
[    0.211506] pci 0000:01:00.0: reg 30: [mem 0x000c0000-0x000cffff pref]
[    0.211525] pci 0000:01:00.0: supports D1 D2
[    0.211559] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.211569] pci 0000:00:01.0:   bridge window [io  0xc000-0xdfff]
[    0.211575] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff]
[    0.211581] pci 0000:00:01.0:   bridge window [mem 0x90000000-0x9fffffff pref]
[    0.211626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.216964] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
[    0.217100] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
[    0.217200] ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
[    0.217298] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
[    0.217647] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.217659] vgaarb: loaded
[    0.218020] SCSI subsystem initialized
[    0.218249] libata version 3.00 loaded.
[    0.218426] usbcore: registered new interface driver usbfs
[    0.218561] usbcore: registered new interface driver hub
[    0.218647] usbcore: registered new device driver usb
[    0.218934] PCI: Using ACPI for IRQ routing
[    0.218949] PCI: pci_cache_line_size set to 32 bytes
[    0.219076] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.219082] reserve RAM buffer: 000000000dff0000 - 000000000fffffff
[    0.219515] Switching to clocksource pit
[    0.226054] pnp: PnP ACPI init
[    0.226116] ACPI: bus type pnp registered
[    0.229572] pnp 00:00: [bus 00-ff]
[    0.229577] pnp 00:00: [io  0x0cf8-0x0d07]
[    0.229582] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.229586] pnp 00:00: [io  0x0d00-0xffff window]
[    0.229590] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.229594] pnp 00:00: [mem 0x000c0000-0x000cffff window]
[    0.229598] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.229602] pnp 00:00: [mem 0xfff80000-0xffffffff]
[    0.229606] pnp 00:00: [mem 0x10000000-0xfedfffff window]
[    0.229796] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.229909] pnp 00:01: [irq 12]
[    0.230009] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[    0.230029] pnp 00:02: [io  0x0060]
[    0.230032] pnp 00:02: [io  0x0064]
[    0.230037] pnp 00:02: [irq 1]
[    0.230131] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.230149] pnp 00:03: [io  0x0070-0x0075]
[    0.230154] pnp 00:03: [irq 8]
[    0.230259] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.230279] pnp 00:04: [io  0x0061]
[    0.230372] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.230441] pnp 00:05: [mem 0x000e0000-0x000fffff]
[    0.230581] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.230599] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.230622] pnp 00:06: [dma 4]
[    0.230626] pnp 00:06: [io  0x0000-0x000f]
[    0.230629] pnp 00:06: [io  0x0080-0x008f]
[    0.230633] pnp 00:06: [io  0x00c0-0x00df]
[    0.230739] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.230844] pnp 00:07: [io  0x0022]
[    0.230847] pnp 00:07: [io  0x002e-0x002f]
[    0.230851] pnp 00:07: [io  0x0092]
[    0.230854] pnp 00:07: [io  0x00a8-0x00a9]
[    0.230857] pnp 00:07: [io  0x0330-0x0331]
[    0.230860] pnp 00:07: [io  0x04d0-0x04d1]
[    0.230864] pnp 00:07: [io  0x1000-0x107f]
[    0.230867] pnp 00:07: [io  0x1400-0x140f]
[    0.230870] pnp 00:07: [io  0x1600-0x167f]
[    0.230873] pnp 00:07: [mem 0x0e000000-0x0fffffff]
[    0.231000] system 00:07: [io  0x0330-0x0331] has been reserved
[    0.231011] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.231019] system 00:07: [io  0x1000-0x107f] has been reserved
[    0.231027] system 00:07: [io  0x1400-0x140f] has been reserved
[    0.231035] system 00:07: [io  0x1600-0x167f] has been reserved
[    0.231044] system 00:07: [mem 0x0e000000-0x0fffffff] could not be reserved
[    0.231053] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.231071] pnp 00:08: [io  0x00f0-0x00ff]
[    0.231076] pnp 00:08: [irq 13]
[    0.231174] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.231638] pnp 00:09: [io  0x0378-0x037f]
[    0.231643] pnp 00:09: [io  0x0778-0x077b]
[    0.231647] pnp 00:09: [irq 7]
[    0.231650] pnp 00:09: [dma 3]
[    0.231866] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.232215] pnp 00:0a: [io  0x2200-0x227f]
[    0.232219] pnp 00:0a: [io  0x2280-0x22ff]
[    0.232223] pnp 00:0a: [irq 3]
[    0.232227] pnp 00:0a: [dma 5]
[    0.232518] pnp 00:0a: Plug and Play ACPI device, IDs VIA3076 (active)
[    0.232655] pnp: PnP ACPI: found 11 devices
[    0.232665] ACPI: ACPI bus type pnp unregistered
[    0.274898] Switching to clocksource acpi_pm
[    0.274981] pci 0000:01:00.0: no compatible bridge window for [mem 0x000c0000-0x000cffff pref]
[    0.275030] pci 0000:00:09.0: BAR 9: assigned [mem 0x10000000-0x13ffffff pref]
[    0.275042] pci 0000:00:09.0: BAR 10: assigned [mem 0x14000000-0x17ffffff]
[    0.275053] pci 0000:00:09.0: BAR 0: assigned [mem 0x18000000-0x18000fff]
[    0.275067] pci 0000:00:09.0: BAR 0: set to [mem 0x18000000-0x18000fff] (PCI address [0x18000000-0x18000fff])
[    0.275083] pci 0000:00:09.0: BAR 7: assigned [io  0x1800-0x18ff]
[    0.275093] pci 0000:00:09.0: BAR 8: assigned [io  0x1c00-0x1cff]
[    0.275103] pci 0000:01:00.0: BAR 6: assigned [mem 0x98000000-0x9800ffff pref]
[    0.275113] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.275122] pci 0000:00:01.0:   bridge window [io  0xc000-0xdfff]
[    0.275132] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff]
[    0.275142] pci 0000:00:01.0:   bridge window [mem 0x90000000-0x9fffffff pref]
[    0.275155] pci 0000:00:09.0: CardBus bridge to [bus 02-05]
[    0.275163] pci 0000:00:09.0:   bridge window [io  0x1800-0x18ff]
[    0.275172] pci 0000:00:09.0:   bridge window [io  0x1c00-0x1cff]
[    0.275182] pci 0000:00:09.0:   bridge window [mem 0x10000000-0x13ffffff pref]
[    0.275193] pci 0000:00:09.0:   bridge window [mem 0x14000000-0x17ffffff]
[    0.275218] pci 0000:00:01.0: setting latency timer to 64
[    0.275420] Switched to NOHz mode on CPU #0
[    0.275580] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.275590] PCI: setting IRQ 11 as level-triggered
[    0.275599] pci 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.275614] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.275619] pci_bus 0000:00: resource 1 [mem 0x00000000-0x3ffffffff]
[    0.275623] pci_bus 0000:01: resource 0 [io  0xc000-0xdfff]
[    0.275627] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xefffffff]
[    0.275631] pci_bus 0000:01: resource 2 [mem 0x90000000-0x9fffffff pref]
[    0.275636] pci_bus 0000:02: resource 0 [io  0x1800-0x18ff]
[    0.275639] pci_bus 0000:02: resource 1 [io  0x1c00-0x1cff]
[    0.275644] pci_bus 0000:02: resource 2 [mem 0x10000000-0x13ffffff pref]
[    0.275648] pci_bus 0000:02: resource 3 [mem 0x14000000-0x17ffffff]
[    0.275783] NET: Registered protocol family 2
[    0.275910] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.276169] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.276322] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.276472] TCP: Hash tables configured (established 8192 bind 8192)
[    0.276480] TCP reno registered
[    0.276488] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    0.276512] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    0.276803] NET: Registered protocol family 1
[    0.277062] RPC: Registered udp transport module.
[    0.277071] RPC: Registered tcp transport module.
[    0.277077] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.277108] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.277216] pci 0000:01:00.0: Boot video device
[    0.277220] PCI: CLS 32 bytes, default 32
[    0.277600] Simple Boot Flag at 0x37 set to 0x1
[    0.278860] audit: initializing netlink socket (disabled)
[    0.278898] type=2000 audit(1337963107.277:1): initialized
[    0.285250] VFS: Disk quotas dquot_6.5.2
[    0.285508] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.286275] DLM (built Apr 21 2011 21:10:34) installed
[    0.288603] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.289136] NTFS driver 2.1.30 [Flags: R/W].
[    0.289438] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.289850] JFS: nTxBlock = 1628, nTxLock = 13026
[    0.291928] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.293141] SGI XFS Quota Management subsystem
[    0.293173] OCFS2 1.5.0
[    0.293517] ocfs2: Registered cluster interface o2cb
[    0.293695] ocfs2: Registered cluster interface user
[    0.293704] OCFS2 DLMFS 1.5.0
[    0.293886] OCFS2 User DLM kernel interface loaded
[    0.293895] OCFS2 Node Manager 1.5.0
[    0.294313] OCFS2 DLM 1.5.0
[    0.294927] Btrfs loaded
[    0.296145] GFS2 (built Apr 21 2011 21:11:10) installed
[    0.296191] msgmni has been set to 407
[    0.297707] async_tx: api initialized (async)
[    0.297917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.297981] io scheduler noop registered
[    0.297988] io scheduler deadline registered
[    0.298125] io scheduler cfq registered (default)
[    0.298585] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.299174] vesafb: framebuffer at 0x90000000, mapped to 0xce980000, using 1536k, total 31680k
[    0.299187] vesafb: mode is 1024x768x8, linelength=1024, pages=40
[    0.299194] vesafb: protected mode interface info at c000:96bf
[    0.299202] vesafb: pmi: set display start = c00c974d, set palette = c00c9796
[    0.299210] vesafb: scrolling: redraw
[    0.299217] vesafb: Pseudocolor: size=6:6:6:6, shift=0:0:0:0
[    0.310741] Console: switching to colour frame buffer device 128x48
[    0.322462] fb0: VESA VGA frame buffer device
[    0.322732] ERST: Table is not found!
[    0.322849] isapnp: Scanning for PnP cards...
[    0.635603] isapnp: No Plug & Play device found
[    0.641862] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.280037] Refined TSC clocksource calibration: 1658.522 MHz.
[    1.280181] Switching to clocksource tsc
[    3.664035] floppy0: no floppy controllers found
[    3.668688] brd: module loaded
[    3.668789] Compaq SMART2 Driver (v 2.6.0)
[    3.669122] HP CISS Driver (v 3.6.26)
[    3.670810] Loading iSCSI transport class v2.0-870.
[    3.671866] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[    3.674970] Adaptec aacraid driver 1.1-5[26400]-ms
[    3.675494] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    3.676098] scsi: <fdomain> Detection failed (no card)
[    3.676234] sym53c416.c: Version 1.0.0-ac
[    3.676348] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[    3.676671] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[    3.684641] iscsi: registered transport (qla4xxx)
[    3.688766] QLogic iSCSI HBA Driver
[    3.692781] Emulex LightPulse Fibre Channel SCSI driver 8.3.20
[    3.696863] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    3.701106] Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.3
[    3.727050] Failed initialization of WD-7000 SCSI card!
[    3.754300] DC390: clustering now enabled by default. If you get problems load
[    3.758615]        with "disable_clustering=1" and report to maintainers
[    3.763118] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    3.767724] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    3.772196] megasas: 00.00.05.29-rc1 Tue. Dec. 7 17:00:00 PDT 2010
[    3.776637] mpt2sas version 07.100.00.00 loaded
[    3.781246] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    3.785891] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    3.790498] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    3.795130] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    3.799778] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[    3.804424] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    3.809058] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    3.813883] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    3.822676] pata_via 0000:00:11.1: version 0.3.4
[    3.822705] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[    3.828555] scsi1 : pata_via
[    3.833484] scsi2 : pata_via
[    3.838948] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[    3.843516] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[    3.849124] I2O subsystem v1.325
[    3.853654] i2o: max drivers = 8
[    3.858400] I2O Configuration OSM v1.323
[    3.862899] I2O Bus Adapter OSM v1.317
[    3.867333] I2O Block Device OSM v1.325
[    3.871984] I2O SCSI Peripheral OSM v1.316
[    3.876362] I2O ProcFS OSM v1.316
[    3.880731] Fusion MPT base driver 3.04.18
[    3.885038] Copyright (c) 1999-2008 LSI Corporation
[    3.889375] Fusion MPT SPI Host driver 3.04.18
[    3.893808] Fusion MPT FC Host driver 3.04.18
[    3.898199] Fusion MPT SAS Host driver 3.04.18
[    3.902561] Fusion MPT misc device (ioctl) driver 3.04.18
[    3.907001] mptctl: Registered with Fusion MPT base driver
[    3.911224] mptctl: /dev/mptctl @ (major,minor=10,220)
[    3.915431] Fusion MPT LAN driver 3.04.18
[    3.919719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.924152] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    3.928271] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    3.932536] ehci_hcd 0000:00:10.3: EHCI Host Controller
[    3.937060] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[    3.941354] ehci_hcd 0000:00:10.3: irq 11, io mem 0xf0000000
[    3.951026] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    3.955209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.959341] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.963436] usb usb1: Product: EHCI Host Controller
[    3.967463] usb usb1: Manufacturer: Linux 2.6.38.4-smp ehci_hcd
[    3.971479] usb usb1: SerialNumber: 0000:00:10.3
[    3.975747] hub 1-0:1.0: USB hub found
[    3.979681] hub 1-0:1.0: 4 ports detected
[    3.983904] 116x: driver isp116x-hcd, 03 Nov 2005
[    3.987825] driver isp1362-hcd, 2005-04-04
[    3.991665] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.995572] uhci_hcd: USB Universal Host Controller Interface driver
[    3.999934] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    4.003671] PCI: setting IRQ 10 as level-triggered
[    4.003682] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    4.007516] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    4.011962] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    4.015825] uhci_hcd 0000:00:10.0: irq 10, io base 0x00001200
[    4.019626] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    4.023470] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.027285] usb usb2: Product: UHCI Host Controller
[    4.031129] usb usb2: Manufacturer: Linux 2.6.38.4-smp uhci_hcd
[    4.034961] usb usb2: SerialNumber: 0000:00:10.0
[    4.038952] ata1.00: ATA-6: IC25N020ATMR04-0, MO1OAD0A, max UDMA/100
[    4.042890] ata1.00: 39070080 sectors, multi 16: LBA48
[    4.047171] hub 2-0:1.0: USB hub found
[    4.051125] hub 2-0:1.0: 2 ports detected
[    4.055321] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    4.059454] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    4.063696] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    4.067870] uhci_hcd 0000:00:10.1: irq 11, io base 0x00001300
[    4.072058] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.076244] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.080466] usb usb3: Product: UHCI Host Controller
[    4.084679] usb usb3: Manufacturer: Linux 2.6.38.4-smp uhci_hcd
[    4.088902] usb usb3: SerialNumber: 0000:00:10.1
[    4.093552] hub 3-0:1.0: USB hub found
[    4.097750] hub 3-0:1.0: 2 ports detected
[    4.102457] ata1.00: configured for UDMA/100
[    4.106888] scsi 1:0:0:0: Direct-Access     ATA      IC25N020ATMR04-0 MO1O PQ: 0 ANSI: 5
[    4.111456] sl811: driver sl811-hcd, 19 May 2005
[    4.115753] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[    4.120157] sd 1:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
[    4.124611] sd 1:0:0:0: [sda] Write Protect is off
[    4.128801] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.129513] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.134228] Initializing USB Mass Storage driver...
[    4.139060] usbcore: registered new interface driver usb-storage
[    4.143346] USB Mass Storage support registered.
[    4.147702] usbcore: registered new interface driver ums-alauda
[    4.152083] usbcore: registered new interface driver ums-cypress
[    4.156441] usbcore: registered new interface driver ums-datafab
[    4.160969] usbcore: registered new interface driver ums-freecom
[    4.165245]  sda: sda1 sda2
[    4.169761] usbcore: registered new interface driver ums-isd200
[    4.174154] usbcore: registered new interface driver ums-jumpshot
[    4.178430] usbcore: registered new interface driver ums-karma
[    4.182839] sd 1:0:0:0: [sda] Attached SCSI disk
[    4.186879] usbcore: registered new interface driver ums-onetouch
[    4.190972] usbcore: registered new interface driver ums-sddr09
[    4.195076] usbcore: registered new interface driver ums-sddr55
[    4.199043] usbcore: registered new interface driver ums-usbat
[    4.203033] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    4.216332] i8042: Detected active multiplexing controller, rev 1.1
[    4.224941] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.228823] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.232690] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.236462] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.240154] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.244219] mousedev: PS/2 mouse device common for all mice
[    4.248324] md: linear personality registered for level -1
[    4.251970] md: raid0 personality registered for level 0
[    4.255589] md: raid1 personality registered for level 1
[    4.259136] md: raid10 personality registered for level 10
[    4.262675] md: raid6 personality registered for level 6
[    4.266171] md: raid5 personality registered for level 5
[    4.269601] md: raid4 personality registered for level 4
[    4.272938] md: multipath personality registered for level -4
[    4.276754] device-mapper: uevent: version 1.0.3
[    4.280709] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    4.284345] cpuidle: using governor ladder
[    4.287859] cpuidle: using governor menu
[    4.291785] ata2.00: ATAPI: MATSHITACD-RW  CW-8122, BZ1L, max UDMA/33
[    4.295418] input: Speakup as /devices/virtual/input/input0
[    4.298937] speakup 3.1.6: initialized
[    4.302366] synth name on entry is: (null)
[    4.305839] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    4.309529] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    4.313282] ata2.00: configured for UDMA/33
[    4.316933] TCP cubic registered
[    4.320230] Initializing XFRM netlink socket
[    4.323510] NET: Registered protocol family 17
[    4.326785] Registering the dns_resolver key type
[    4.330112] Using IPI No-Shortcut mode
[    4.334483] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    4.339440] scsi 2:0:0:0: CD-ROM            MATSHITA CD-RW  CW-8122   BZ1L PQ: 0 ANSI: 5
[    4.345147] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    4.348785] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.353122] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.353641] registered taskstats version 1
[    4.362520] md: Waiting for all devices to be available before autodetect
[    4.366311] md: If you don't use raid, use raid=noautodetect
[    4.373771] md: Autodetecting RAID arrays.
[    4.377598] md: Scanned 0 and added 0 devices.
[    4.381435] md: autorun ...
[    4.385273] md: ... autorun DONE.
[    4.450397] usb 1-4: New USB device found, idVendor=7392, idProduct=7711
[    4.454240] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.458040] usb 1-4: Product: 802.11 n WLAN
[    4.461812] usb 1-4: Manufacturer: Ralink
[    4.465616] usb 1-4: SerialNumber: 1.0
[    4.489346] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[    4.495240] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[    4.541586] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.545664] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    4.605698] devtmpfs: mounted
[    4.609798] Freeing unused kernel memory: 628k freed
[    4.615316] Write protecting the kernel text: 10176k
[    4.619459] Write protecting the kernel read-only data: 2584k
[    6.873262] udev: starting version 153
[    6.877599] udevd (1250): /proc/1250/oom_adj is deprecated, please use /proc/1250/oom_score_adj instead.
[    7.705494] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.863446] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    7.867876] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    7.920666] Linux agpgart interface v0.103
[    7.942208] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    7.946735] ACPI: Battery Slot [BAT0] (battery present)
[    8.036714] agpgart: Detected VIA Apollo Pro266 chipset
[    8.046805] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xa0000000
[    8.060673] via-rhine.c:v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[    8.065435] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    8.074329] eth0: VIA Rhine II at 0xf0000100, 00:40:d0:36:92:95, IRQ 10.
[    8.079632] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
[    8.108688] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    8.114899] ACPI: AC Adapter [AC] (on-line)
[    8.120193] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    8.125092] ACPI: Sleep Button [SBTN]
[    8.129972] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    8.150384] rtc_cmos 00:03: RTC can wake from S4
[    8.155403] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    8.160174] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    8.166762] ACPI: Lid Switch [LID]
[    8.171896] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    8.176924] ACPI: Power Button [PWRF]
[    8.188809] ACPI: resource vt596_smbus [io  0x1400-0x1407] conflicts with ACPI region SM06 [io 0x1406-0x1406]
[    8.193925] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.361130] parport_pc 00:09: reported by Plug and Play ACPI
[    8.366514] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    8.399143] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[    8.404459] PCI: setting IRQ 5 as level-triggered
[    8.404473] firewire_ohci 0000:00:0b.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[    8.491278] ACPI: Fan [FAN0] (off)
[    8.522773] firewire_ohci: Added fw-ohci device 0000:00:0b.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x11
[    8.528579] yenta_cardbus 0000:00:09.0: CardBus bridge found [1071:8375]
[    8.534127] yenta_cardbus 0000:00:09.0: Enabling burst memory read transactions
[    8.539613] yenta_cardbus 0000:00:09.0: Using CSCINT to route CSC interrupts to PCI
[    8.545183] yenta_cardbus 0000:00:09.0: Routing CardBus interrupts to PCI
[    8.550672] yenta_cardbus 0000:00:09.0: TI: mfunc 0x010c1672, devctl 0x44
[    8.575534] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input5
[    8.581408] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.597598] thermal LNXTHERM:00: registered as thermal_zone0
[    8.603442] ACPI: Thermal Zone [THRM] (45 C)
[    8.744372] cfg80211: Calling CRDA to update world regulatory domain
[    8.756467] ppdev: user-space parallel port driver
[    8.770881] ACPI: acpi_idle registered with cpuidle
[    8.770979] Marking TSC unstable due to TSC halts in idle
[    8.779145] Switching to clocksource acpi_pm
[    8.785452] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0040, PCI irq 11
[    8.791144] yenta_cardbus 0000:00:09.0: Socket status: 30000006
[    9.029285] firewire_core: created device fw0: GUID 0040d001000f9eac, S400
[    9.531318] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0/0x0
[    9.605773] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
[    9.612779] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[    9.624934] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x320-0x327 0x330-0x337 0x350-0x357 0x370-0x37f
[    9.640213] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[    9.649813] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[    9.656296] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[    9.662133] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input6
[    9.679140] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    9.890831] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[    9.896690] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[    9.993061] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.993508] Registered led device: rt2800usb-phy0::radio
[    9.993541] Registered led device: rt2800usb-phy0::assoc
[    9.993590] Registered led device: rt2800usb-phy0::quality
[    9.994358] usbcore: registered new interface driver rt2800usb
[   10.324174] cfg80211: World regulatory domain updated:
[   10.329753] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.335410] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.341082] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.346779] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.352306] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.357700] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.365508] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[   10.383631] rtusb init --->
[   10.383711] usbcore: registered new interface driver rt2870
[   10.893427] Adding 987960k swap on /dev/sda1.  Priority:-1 extents:1 across:987960k
[   11.041071] fuse init (API version 7.16)
[   11.958182] EXT4-fs (sda2): re-mounted. Opts: (null)
[   12.071503] EXT4-fs (sda2): re-mounted. Opts: (null)
[   12.707363] lp0: using parport0 (interrupt-driven).
[   12.712261] lp0: console ready
[   13.237349] powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
[   13.248502] powernow: SGTC: 13333
[   13.253344] powernow: Minimum speed 663 MHz. Maximum speed 1658 MHz.
[   13.267351] powernow-k8: Processor cpuid 681 not supported
[   13.369508] cpufreq-nforce2: No nForce2 chipset.
[   20.061281] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   22.038478] NET: Registered protocol family 10
[   32.434050] eth0: no IPv6 routers present
[   56.581577] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   64.021670] [drm] Initialized drm 1.1.0 20060810
[   64.139329] pci 0000:01:00.0: power state changed by ACPI to D0
[   64.139347] pci 0000:01:00.0: power state changed by ACPI to D0
[   64.139377] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[   64.139833] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0
[   64.150410] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[   64.150457] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[   64.150554] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[   66.200669] X:1851 conflicting memory types 90000000-95000000 uncached-minus<->write-combining
[   66.200686] reserve_memtype failed 0x90000000-0x95000000, track uncached-minus, req uncached-minus
[  118.082448] glxinfo:2061 conflicting memory types 90000000-95000000 uncached-minus<->write-combining
[  118.082465] reserve_memtype failed 0x90000000-0x95000000, track uncached-minus, req uncached-minus


dmesg con mouse collegato
Codice: Seleziona tutto
[ 1011.016065] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 1011.181018] usb 2-1: New USB device found, idVendor=046d, idProduct=c018
[ 1011.181067] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1011.181079] usb 2-1: Product: USB Optical Mouse
[ 1011.181087] usb 2-1: Manufacturer: Logitech
[ 1011.982787] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input7
[ 1011.983421] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-1/input0
[ 1011.983504] usbcore: registered new interface driver usbhid
[ 1011.983513] usbhid: USB HID core driver
whiteking
Linux 1.0
Linux 1.0
 
Messaggi: 5
Iscritto il: mer mag 23, 2012 14:23

Re: Problema mouse USB

Messaggioda whiteking » ven mag 25, 2012 15:51

Chiedo scusa per il doppio post ma tutto in uno non ci stava.

Xorg.conf non c'è ma c'è Xorg.0.log suppongo sia analogo.
Codice: Seleziona tutto
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux MGZRT30 2.6.38.4-smp #3 SMP Thu Apr 21 21:35:10 CDT 2011 i686
Kernel command line: auto BOOT_IMAGE=Linuz ro root=802 vt.default_utf8=0
Build Date: 26 August 2010  12:40:23PM
 
Current version of pixman: 0.16.6
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May 25 16:26:08 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/local" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
   Entry deleted from font path.
(**) FontPath set to:
   /usr/share/fonts/TTF,
   /usr/share/fonts/OTF,
   /usr/share/fonts/Type1,
   /usr/share/fonts/misc,
   /usr/share/fonts/75dpi/:unscaled,
   /usr/share/fonts/100dpi/:unscaled,
   /usr/share/fonts/75dpi,
   /usr/share/fonts/100dpi,
   /usr/share/fonts/cyrillic,
   /usr/share/fonts/TTF,
   /usr/share/fonts/OTF,
   /usr/share/fonts/Type1,
   /usr/share/fonts/misc,
   /usr/share/fonts/75dpi/:unscaled,
   /usr/share/fonts/100dpi/:unscaled,
   /usr/share/fonts/75dpi,
   /usr/share/fonts/100dpi,
   /usr/share/fonts/cyrillic
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c40
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 6.0
   X.Org XInput driver : 7.0
   X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 5333:8d04:1071:8375 rev 0, Mem @ 0xe0000000/524288, 0x90000000/134217728, BIOS @ 0x????????/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.1.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
   compiled for 1.7.5, module version = 2.3.1
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 6.0
(II) SAVAGE: driver (version 2.3.1) for S3 Savage chipsets: Savage4,
   Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
   Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
   Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
   SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
   SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
   SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 0.1.0
   ABI class: X.Org Video Driver, version 6.0
(**) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
(==) SAVAGE(0): RGB weight 888
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using XAA acceleration architecture
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.1.0
   ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   ABI class: X.Org Video Driver, version 6.0
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
(--) SAVAGE(0): Engine: "ProSavageDDR"
(--) SAVAGE(0): AGP card detected
(==) SAVAGE(0): Using AGP DMA
(==) SAVAGE(0): Will try command and vertex DMA mode
(==) SAVAGE(0): Using AGP 1x mode
(==) SAVAGE(0): Using 16 MB AGP aperture
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram:  32768k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
(--) SAVAGE(0): 1024x768 TFT LCD panel detected and active
(--) SAVAGE(0): - Limiting video mode to 1024x768
(--) SAVAGE(0): Found 13 modes at this depth:
    [10f] 320 x 200, 70Hz
    [134] 320 x 240, 72Hz
    [144] 400 x 300, 72Hz
    [154] 512 x 384, 70Hz
    [11e] 640 x 400, 70Hz
    [112] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz, 160Hz
    [115] 800 x 600, 60Hz, 75Hz, 85Hz
    [118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz
    [17b] 1280 x 768, 60Hz
    [16a] 1280 x 960, 60Hz, 85Hz
    [11b] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz
    [13e] 1400 x 1050, 60Hz, 75Hz
    [124] 1600 x 1200, 60Hz
(II) SAVAGE(0): Monitor0: Using hsync range of 31.50-47.82 kHz
(II) SAVAGE(0): Monitor0: Using vrefresh range of 56.00-59.92 Hz
(II) SAVAGE(0): Monitor0: Using maximum pixel clock of 63.50 MHz
(II) SAVAGE(0): Estimated virtual size for aspect ratio 1.3333 is 1024x768
(II) SAVAGE(0): Clock range:  10.00 to 220.00 MHz
(--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
(II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
(II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
(--) SAVAGE(0): Chose mode 11e at 70Hz.
(II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 10f at 70Hz.
(II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
(II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
(II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 118 at 70Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz.
(II) SAVAGE(0): Not using default mode "832x624" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
(II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
(**) SAVAGE(0): *Driver mode "1024x768": 56.0 MHz, 47.3 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "1024x768"x59.9   56.00  1024 1072 1104 1184  768 771 775 790 +hsync -vsync (47.3 kHz)
(**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) SAVAGE(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(==) SAVAGE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.2.1
   ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(II) SAVAGE(0): 9348 kB of Videoram needed for 3D; 32768 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 32 depth: 24
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "savage" driver.
(II) [drm] DRM interface version 1.4
(II) [drm] DRM open master succeeded.
(II) SAVAGE(0): [drm] Using the DRM lock SAREA also for drawables.
(II) SAVAGE(0): [drm] framebuffer handle = 0x90000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): X context handle = 0x1
(II) SAVAGE(0): [drm] installed DRM signal handler
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3156; Card 0x5333/0x8d04]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] command DMA handle = 0xa0000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xa0100000
(II) SAVAGE(0): [drm] aperture handle = 0x90000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x09d59000
(II) SAVAGE(0): [drm] Status page mapped at 0xb0053000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): virtualX:1024,virtualY:768
(II) SAVAGE(0): bpp:32,tiledwidthBytes:4096,tiledBufferSize:3145728
(II) SAVAGE(0): bpp:32,widthBytes:4096,BufferSize:3145728
(II) SAVAGE(0): videoRambytes:0x02000000
(II) SAVAGE(0): textureSize:0x014df000
(II) SAVAGE(0): textureSize:0x014df000
(II) SAVAGE(0): textureOffset:0x00b00000
(II) SAVAGE(0): depthOffset:0x00800000,depthPitch:4096
(II) SAVAGE(0): backOffset:0x00500000,backPitch:4096
(II) SAVAGE(0): Reserved back buffer at offset 0x500000
(II) SAVAGE(0): Reserved depth buffer at offset 0x800000
(II) SAVAGE(0): Reserved 21372 kb for textures at offset 0xb00000
(II) SAVAGE(0): Using 511 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Image Writes
   Setting up tile and stipple cache:
      24 128x128 slots
(==) SAVAGE(0): Backing store disabled
(==) SAVAGE(0): DPMS enabled
(II) SAVAGE(0): [DRI] installation complete
(II) SAVAGE(0): [junkers]pSAVAGEDRIServer:
(II) SAVAGE(0): [junkers]   reserved_map_agpstart:0x00000000
(II) SAVAGE(0): [junkers]   reserved_map_idx:0x00000000
(II) SAVAGE(0): [junkers]   sarea_priv_offset:0x00000000
(II) SAVAGE(0): [junkers]   chipset:0x00000000
(II) SAVAGE(0): [junkers]   sgram:0x00000000
(II) SAVAGE(0): [junkers]   frontbufferSize:0x00300000
(II) SAVAGE(0): [junkers]   frontOffset:0x00000000
(II) SAVAGE(0): [junkers]   frontPitch:0x00001000
(II) SAVAGE(0): [junkers]   backbufferSize:0x00300000
(II) SAVAGE(0): [junkers]   backOffset:0x00500000
(II) SAVAGE(0): [junkers]   backPitch:0x00001000
(II) SAVAGE(0): [junkers]   depthbufferSize:0x00300000
(II) SAVAGE(0): [junkers]   depthOffset:0x00800000
(II) SAVAGE(0): [junkers]   depthPitch:0x00001000
(II) SAVAGE(0): [junkers]   textureOffset:0x00b00000
(II) SAVAGE(0): [junkers]   textureSize:0x014df000
(II) SAVAGE(0): [junkers]   textureSize:0x014df000
(II) SAVAGE(0): [junkers]   logTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers]   agp:handle:0x00000001
(II) SAVAGE(0): [junkers]   agp:offset:0x01000000
(II) SAVAGE(0): [junkers]   agp:size:0x01000000
(II) SAVAGE(0): [junkers]   agp:map:0x00000000
(II) SAVAGE(0): [junkers]   registers:handle:0xe0000000
(II) SAVAGE(0): [junkers]   registers:offset:0x00000000
(II) SAVAGE(0): [junkers]   registers:size:0x00080000
(II) SAVAGE(0): [junkers]   registers:map:0x00000000
(II) SAVAGE(0): [junkers]   status:handle:0x09d59000
(II) SAVAGE(0): [junkers]   status:offset:0x00000000
(II) SAVAGE(0): [junkers]   status:size:0x00001000
(II) SAVAGE(0): [junkers]   status:map:0xb0053000
(II) SAVAGE(0): [junkers]   agpTextures:handle:0xa0100000
(II) SAVAGE(0): [junkers]   agpTextures:offset:0x00100000
(II) SAVAGE(0): [junkers]   agpTextures:size:0x00f00000
(II) SAVAGE(0): [junkers]   apgTextures:map:0x00000000
(II) SAVAGE(0): [junkers]   logAgpTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers]   cmdDma:handle:0xa0000000
(II) SAVAGE(0): [junkers]   cmdDma:offset:0x00000000
(II) SAVAGE(0): [junkers]   cmdDma:size:0x00100000
(II) SAVAGE(0): [junkers]   cmdDma:map:0x00000000
(II) SAVAGE(0): [junkers]pSAVAGEDRI:
(II) SAVAGE(0): [junkers]   chipset:0x00000006
(II) SAVAGE(0): [junkers]   width:0x00000400
(II) SAVAGE(0): [junkers]   height:0x00000300
(II) SAVAGE(0): [junkers]   mem:0x02000000
(II) SAVAGE(0): [junkers]   cpp:4
(II) SAVAGE(0): [junkers]   zpp:4
(II) SAVAGE(0): [junkers]   agpMode:1
(II) SAVAGE(0): [junkers]   bufferSize:65536
(II) SAVAGE(0): [junkers]   frontbufferSize:0x00300000
(II) SAVAGE(0): [junkers]   frontOffset:0x00000000
(II) SAVAGE(0): [junkers]   backbufferSize:0x00300000
(II) SAVAGE(0): [junkers]   backOffset:0x00500000
(II) SAVAGE(0): [junkers]   depthbufferSize:0x00300000
(II) SAVAGE(0): [junkers]   depthOffset:0x00800000
(II) SAVAGE(0): [junkers]   textureOffset:0x00b00000
(II) SAVAGE(0): [junkers]   textureSize:0x01400000
(II) SAVAGE(0): [junkers]   logTextureGranularity:0x00000015
(II) SAVAGE(0): [junkers]   agpTextureHandle:0xa0100000
(II) SAVAGE(0): [junkers]   agpTextureSize:0x00f00000
(II) SAVAGE(0): [junkers]   logAgpTextureGranularity:0x00000014
(II) SAVAGE(0): [junkers]   apertureHandle:0x90000000
(II) SAVAGE(0): [junkers]   apertureSize:0x05000000
(II) SAVAGE(0): [junkers]   aperturePitch:0x00002000
(II) SAVAGE(0): [junkers]   statusHandle:0x09d59000
(II) SAVAGE(0): [junkers]   statusSize:0x00001000
(II) SAVAGE(0): [junkers]   sarea_priv_offset:0x00000898
(II) SAVAGE(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(EE) AIGLX error: Calling driver entry point failed
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Speakup
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 2.3.3
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 7.0
(**) Speakup: always reports core events
(**) Speakup: Device: "/dev/input/event0"
(II) Speakup: Found keys
(II) Speakup: Configuring as keyboard
(II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(**) SynPS/2 Synaptics TouchPad: always reports core events
(**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event6"
(II) SynPS/2 Synaptics TouchPad: Found 11 mouse buttons
(II) SynPS/2 Synaptics TouchPad: Found absolute axes
(II) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
(II) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
(II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
(**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
(**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Logitech USB Optical Mouse
(**) Logitech USB Optical Mouse: always reports core events
(**) Logitech USB Optical Mouse: Device: "/dev/input/event7"
(II) Logitech USB Optical Mouse: Found 3 mouse buttons
(II) Logitech USB Optical Mouse: Found scroll wheel(s)
(II) Logitech USB Optical Mouse: Found relative axes
(II) Logitech USB Optical Mouse: Found x and y relative axes
(II) Logitech USB Optical Mouse: Configuring as mouse
(**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
(**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB Optical Mouse: (accel) acceleration profile 0
(II) Logitech USB Optical Mouse: initialized for relative axes.


Grazie mille
whiteking
Linux 1.0
Linux 1.0
 
Messaggi: 5
Iscritto il: mer mag 23, 2012 14:23

Re: Problema mouse USB

Messaggioda conraid » ven mag 25, 2012 16:05

beh, dai log non sembra proprio una 13.37, ma una 13.1 :)
naturalmente questo non c'entra niente con il tuo problema, il mouse deve funzionare sempre. E' per caso un mouse wireless?
Avatar utente
conraid
Staff
Staff
 
Messaggi: 12022
Iscritto il: mer lug 13, 2005 23:00
Località: Livorno
Nome Cognome: Corrado Franco
Slackware: current

Re: Problema mouse USB

Messaggioda whiteking » dom mag 27, 2012 12:03

conraid ha scritto:beh, dai log non sembra proprio una 13.37, ma una 13.1 :)
naturalmente questo non c'entra niente con il tuo problema, il mouse deve funzionare sempre. E' per caso un mouse wireless?

Guarda per la versione a me è stato detto che era una 13.37 però non avendolo installato io a questo punto mi vengono dei dubbi.
In ogni caso il mouse mon è wireless e in più ho già provato con altri mouse pensando inizialmente ad un difetto hardware
whiteking
Linux 1.0
Linux 1.0
 
Messaggi: 5
Iscritto il: mer mag 23, 2012 14:23

Re: Problema mouse USB

Messaggioda targzeta » dom mag 27, 2012 12:19

Se vuoi sapere la versione basta che fai:
Codice: Seleziona tutto
cat /etc/slackware-version


Emanuele
Linux Registered User #454438
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
20/04/2013 - Io volevo Rodotà
Avatar utente
targzeta
Iper Master
Iper Master
 
Messaggi: 6185
Iscritto il: gio nov 03, 2005 14:05
Località: Carpignano Sal. (LE) <-> Pisa
Nome Cognome: Emanuele Tomasi
Slackware: current
Kernel: latest stable
Desktop: IceWM


Torna a Slackware

Chi c’è in linea

Visitano il forum: Google [Bot] e 3 ospiti