Repository 32bit  Forum
Repository 64bit  Wiki

[RISOLTO] Migliorie compilazione kernel

Postate qui per tutte le discussioni legate a Linux in generale.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Gnu/Linux in genere, se l'argomento è specifico alla Slackware usate uno dei forum Slackware o Slackware64.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

[RISOLTO] Migliorie compilazione kernel

Messaggioda Xunyl » lun lug 23, 2012 18:49

Salve a tutti, per la prima volta mi sono cimentato in una configurazione del kernel personalizzata, le altre volte ho sempre usato il config generic di PAT più "make oldconfig".
Utilizzo Slackware 13.37. Ho scaricato l'ultimo kernel stabile, il 3.4.6, usando come base il config generic di PAT, poi ho dato un "make localmodconfig" per fare una prima, automatica, scrematura. Successivamente con "make menuconfig" sono andato a eliminare a mano tutto quello che non mi serve o che comunque non corrisponde all'hardware del mio laptop. Ho messo come statici i driver essenziali per non usare l'initrd, ho compilato e al riavvio, con mia grande sorpresa, il sistema si avvia senza kernel panic! =D>
Sembra anche funzionare tutto bene, almeno per quello che ho potuto testare finora. Solo le usb non le riconosce, se infilo la chiavetta non dà segni di vita, non mi riferisco solamente all'automount, non viene proprio riconosciuta. Sapete darmi dei consigli per ritoccare meglio il mio config?
lspci -vnn
Codice: Seleziona tutto
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, fast devsel, latency 0
   Capabilities: [e0] Vendor Specific Information: Len=0a <?>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   I/O behind bridge: 00002000-00002fff
   Memory behind bridge: f4000000-f40fffff
   Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
   Capabilities: [88] Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Capabilities: [80] Power Management version 3
   Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
   Capabilities: [a0] Express Root Port (Slot+), MSI 00
   Capabilities: [100] Virtual Channel
   Capabilities: [140] Root Complex Link
   Kernel driver in use: pcieport

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, medium devsel, latency 0, IRQ 20
   I/O ports at 1800 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, medium devsel, latency 0, IRQ 20
   I/O ports at 1820 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, medium devsel, latency 0, IRQ 20
   Memory at f4504800 (32-bit, non-prefetchable) [size=1K]
   Capabilities: [50] Power Management version 2
   Capabilities: [58] Debug port: BAR=1 offset=00a0
   Capabilities: [98] PCI Advanced Features
   Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, fast devsel, latency 0, IRQ 45
   Memory at f4500000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: [50] Power Management version 2
   Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
   Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
   Capabilities: [100] Virtual Channel
   Capabilities: [130] Root Complex Link
   Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
   I/O behind bridge: 00004000-00004fff
   Memory behind bridge: f4100000-f41fffff
   Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
   Capabilities: [40] Express Root Port (Slot+), MSI 00
   Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
   Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Capabilities: [a0] Power Management version 2
   Capabilities: [100] Virtual Channel
   Capabilities: [180] Root Complex Link
   Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   I/O behind bridge: 00005000-00005fff
   Memory behind bridge: f4200000-f42fffff
   Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
   Capabilities: [40] Express Root Port (Slot+), MSI 00
   Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
   Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Capabilities: [a0] Power Management version 2
   Capabilities: [100] Virtual Channel
   Capabilities: [180] Root Complex Link
   Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0
   Bus: primary=00, secondary=04, subordinate=06, sec-latency=0
   I/O behind bridge: 00003000-00003fff
   Memory behind bridge: f2000000-f3ffffff
   Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
   Capabilities: [40] Express Root Port (Slot+), MSI 00
   Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
   Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Capabilities: [a0] Power Management version 2
   Capabilities: [100] Virtual Channel
   Capabilities: [180] Root Complex Link
   Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, medium devsel, latency 0, IRQ 23
   I/O ports at 1840 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, medium devsel, latency 0, IRQ 17
   I/O ports at 1860 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, medium devsel, latency 0, IRQ 18
   I/O ports at 1880 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, medium devsel, latency 0, IRQ 18
   I/O ports at 18a0 [size=32]
   Capabilities: [50] PCI Advanced Features
   Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, medium devsel, latency 0, IRQ 23
   Memory at f4504c00 (32-bit, non-prefetchable) [size=1K]
   Capabilities: [50] Power Management version 2
   Capabilities: [58] Debug port: BAR=1 offset=00a0
   Capabilities: [98] PCI Advanced Features
   Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
   Flags: bus master, fast devsel, latency 0
   Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
   Capabilities: [50] Subsystem: Acer Incorporated [ALI] Device [1025:0205]

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, medium devsel, latency 0
   Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 44
   I/O ports at 18f0 [size=8]
   I/O ports at 18e4 [size=4]
   I/O ports at 18e8 [size=8]
   I/O ports at 18e0 [size=4]
   I/O ports at 18c0 [size=32]
   Memory at f4504000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
   Capabilities: [70] Power Management version 3
   Capabilities: [a8] SATA HBA v1.0
   Capabilities: [b0] PCI Advanced Features
   Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: medium devsel, IRQ 19
   Memory at c0400000 (64-bit, non-prefetchable) [size=256]
   I/O ports at 1c00 [size=32]

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] [1002:9553] (prog-if 00 [VGA controller])
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, fast devsel, latency 0, IRQ 16
   Memory at d0000000 (32-bit, prefetchable) [size=256M]
   I/O ports at 2000 [size=256]
   Memory at f4000000 (32-bit, non-prefetchable) [size=64K]
   [virtual] Expansion ROM at f4020000 [disabled] [size=128K]
   Capabilities: [50] Power Management version 3
   Capabilities: [58] Express Legacy Endpoint, MSI 00
   Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
   Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>

01:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38]
   Subsystem: Acer Incorporated [ALI] Device [1025:0205]
   Flags: bus master, fast devsel, latency 0, IRQ 46
   Memory at f4010000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: [50] Power Management version 3
   Capabilities: [58] Express Legacy Endpoint, MSI 00
   Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
   Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Kernel driver in use: snd_hda_intel

02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10)
   Subsystem: Acer Incorporated [ALI] Device [1025:0207]
   Flags: bus master, fast devsel, latency 0, IRQ 47
   Memory at f4100000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: [48] Power Management version 3
   Capabilities: [40] Vital Product Data
   Capabilities: [60] Vendor Specific Information: Len=6c <?>
   Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
   Capabilities: [cc] Express Endpoint, MSI 00
   Capabilities: [100] Advanced Error Reporting
   Capabilities: [13c] Virtual Channel
   Capabilities: [160] Device Serial Number 00-1f-16-ff-fe-bf-14-17
   Capabilities: [16c] Power Budgeting <?>
   Kernel driver in use: tg3

03:00.0 Network controller [0280]: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
   Subsystem: Foxconn International, Inc. Device [105b:e01f]
   Flags: bus master, fast devsel, latency 0, IRQ 17
   Memory at f4200000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: [40] Power Management version 2
   Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
   Capabilities: [60] Express Legacy Endpoint, MSI 00
   Capabilities: [90] MSI-X: Enable- Count=1 Masked-
   Capabilities: [100] Advanced Error Reporting
   Capabilities: [140] Virtual Channel
   Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
   Kernel driver in use: ath9k

lsusb
Codice: Seleziona tutto
Bus 002 Device 003: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314]
Bus 005 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

dmesg
Codice: Seleziona tutto
0xc0000000-0xdfffffff] (subtractive decode)
[    0.680713] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.680736] pci_bus 0000:00: on NUMA node 0
[    0.680740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.680832] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.680880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.680949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.680982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.681019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.681062]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.681133]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.681227] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.686977] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[    0.687255] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[    0.687526] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[    0.687929] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[    0.688202] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
[    0.688472] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[    0.688743] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.689091] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
[    0.689343] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.689343] vgaarb: loaded
[    0.689343] vgaarb: bridge control possible 0000:01:00.0
[    0.689343] SCSI subsystem initialized
[    0.689928] libata version 3.00 loaded.
[    0.689936] usbcore: registered new interface driver usbfs
[    0.689998] usbcore: registered new interface driver hub
[    0.689998] usbcore: registered new device driver usb
[    0.689998] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.689998] PCI: Using ACPI for IRQ routing
[    0.697625] PCI: pci_cache_line_size set to 64 bytes
[    0.697865] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[    0.697868] reserve RAM buffer: 00000000bf8a1000 - 00000000bfffffff
[    0.697872] reserve RAM buffer: 00000000bf9cf000 - 00000000bfffffff
[    0.697875] reserve RAM buffer: 00000000bfb09000 - 00000000bfffffff
[    0.697878] reserve RAM buffer: 00000000bfd19000 - 00000000bfffffff
[    0.697881] reserve RAM buffer: 00000000bfd5f000 - 00000000bfffffff
[    0.697884] reserve RAM buffer: 00000000bfde2000 - 00000000bfffffff
[    0.697886] reserve RAM buffer: 00000000bfe00000 - 00000000bfffffff
[    0.698024] cfg80211: Calling CRDA to update world regulatory domain
[    0.698102] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.698102] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.698909] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.701924] Switching to clocksource hpet
[    0.704980] pnp: PnP ACPI init
[    0.705086] ACPI: bus type pnp registered
[    0.705472] pnp 00:00: [bus 00-ff]
[    0.705475] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.705477] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.705479] pnp 00:00: [io  0x0d00-0xffff window]
[    0.705481] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.705483] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.705486] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.705488] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.705490] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.705492] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.705494] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.705496] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.705498] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.705500] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.705502] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.705504] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.705507] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.705509] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.705511] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.705513] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.705641] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.705724] pnp 00:01: [io  0x0060]
[    0.705726] pnp 00:01: [io  0x0064]
[    0.705738] pnp 00:01: [irq 1]
[    0.705796] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.705812] pnp 00:02: [irq 12]
[    0.705872] pnp 00:02: Plug and Play ACPI device, IDs SYN1b22 SYN1b00 SYN0002 PNP0f13 (active)
[    0.705883] pnp 00:03: [io  0x0000-0x001f]
[    0.705885] pnp 00:03: [io  0x0081-0x0091]
[    0.705887] pnp 00:03: [io  0x0093-0x009f]
[    0.705888] pnp 00:03: [io  0x00c0-0x00df]
[    0.705891] pnp 00:03: [dma 4]
[    0.705946] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.705956] pnp 00:04: [mem 0xffc00000-0xffffffff]
[    0.706022] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[    0.706095] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[    0.706193] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.706267] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.706279] pnp 00:06: [io  0x00f0]
[    0.706287] pnp 00:06: [irq 13]
[    0.706342] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.706356] pnp 00:07: [io  0x002e-0x002f]
[    0.706358] pnp 00:07: [io  0x004e-0x004f]
[    0.706360] pnp 00:07: [io  0x0061]
[    0.706361] pnp 00:07: [io  0x0063]
[    0.706363] pnp 00:07: [io  0x0065]
[    0.706365] pnp 00:07: [io  0x0067]
[    0.706369] pnp 00:07: [io  0x0070]
[    0.706371] pnp 00:07: [io  0x0080]
[    0.706372] pnp 00:07: [io  0x0092]
[    0.706374] pnp 00:07: [io  0x00b2-0x00b3]
[    0.706376] pnp 00:07: [io  0x0068-0x006f]
[    0.706378] pnp 00:07: [io  0x0480-0x048f]
[    0.706380] pnp 00:07: [io  0xffff]
[    0.706381] pnp 00:07: [io  0xffff]
[    0.706383] pnp 00:07: [io  0x0400-0x047f]
[    0.706385] pnp 00:07: [io  0x1180-0x11ff]
[    0.706387] pnp 00:07: [io  0xfe00]
[    0.706389] pnp 00:07: [mem 0xff800000-0xff800fff]
[    0.706479] system 00:07: [io  0x0480-0x048f] has been reserved
[    0.706551] system 00:07: [io  0xffff] has been reserved
[    0.706620] system 00:07: [io  0xffff] has been reserved
[    0.706690] system 00:07: [io  0x0400-0x047f] has been reserved
[    0.706761] system 00:07: [io  0x1180-0x11ff] has been reserved
[    0.706831] system 00:07: [io  0xfe00] has been reserved
[    0.706902] system 00:07: [mem 0xff800000-0xff800fff] has been reserved
[    0.706974] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.706984] pnp 00:08: [io  0x0070-0x0077]
[    0.706991] pnp 00:08: [irq 8]
[    0.707059] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.707191] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.707193] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[    0.707195] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    0.707197] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    0.707199] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    0.707201] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    0.707300] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.707373] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.707444] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.707515] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.707586] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.707657] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.707729] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.707850] pnp: PnP ACPI: found 10 devices
[    0.707919] ACPI: ACPI bus type pnp unregistered
[    0.716517] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02-02] add_size 1000
[    0.716522] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[    0.716532] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03-03] add_size 1000
[    0.716536] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[    0.716564] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.716567] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.716570] pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.716572] pci 0000:00:1c.1: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.716581] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.716681] pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.716777] pci 0000:00:1c.0: BAR 7: assigned [io  0x4000-0x4fff]
[    0.716848] pci 0000:00:1c.1: BAR 7: assigned [io  0x5000-0x5fff]
[    0.716920] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0400000-0xc04000ff 64bit]
[    0.717102] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4020000-0xf403ffff pref]
[    0.717197] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.717267] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.717339] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.717411] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.717508] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.717578] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.717651] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.717724] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.717823] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.717893] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.717966] pci 0000:00:1c.1:   bridge window [mem 0xf4200000-0xf42fffff]
[    0.718051] pci 0000:00:1c.1:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.718150] pci 0000:00:1c.4: PCI bridge to [bus 04-06]
[    0.718220] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.718293] pci 0000:00:1c.4:   bridge window [mem 0xf2000000-0xf3ffffff]
[    0.718366] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.718465] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
[    0.718583] pci 0000:00:1e.0: setting latency timer to 64
[    0.718588] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.718590] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.718592] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.718595] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.718597] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.718600] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    0.718602] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
[    0.718604] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff]
[    0.718607] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff]
[    0.718609] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.718611] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf40fffff]
[    0.718614] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.718616] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.718619] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf41fffff]
[    0.718621] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.718624] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.718626] pci_bus 0000:03: resource 1 [mem 0xf4200000-0xf42fffff]
[    0.718628] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.718631] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.718633] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf3ffffff]
[    0.718635] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.718638] pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
[    0.718640] pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff]
[    0.718642] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[    0.718645] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.718647] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.718649] pci_bus 0000:0d: resource 9 [mem 0x000dc000-0x000dffff]
[    0.718651] pci_bus 0000:0d: resource 10 [mem 0x000e0000-0x000e3fff]
[    0.718654] pci_bus 0000:0d: resource 11 [mem 0xc0000000-0xdfffffff]
[    0.718656] pci_bus 0000:0d: resource 12 [mem 0xf0000000-0xfebfffff]
[    0.718704] NET: Registered protocol family 2
[    0.718833] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.719434] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.721907] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.722515] TCP: Hash tables configured (established 262144 bind 65536)
[    0.722590] TCP: reno registered
[    0.722664] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.722768] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.722979] NET: Registered protocol family 1
[    0.723332] pci 0000:01:00.0: Boot video device
[    0.723494] PCI: CLS 64 bytes, default 64
[    0.723554] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.723624] Placing 64MB software IO TLB between ffff8800bb8a1000 - ffff8800bf8a1000
[    0.723715] software IO TLB at phys 0xbb8a1000 - 0xbf8a1000
[    0.723811] Simple Boot Flag at 0x57 set to 0x1
[    0.724573] audit: initializing netlink socket (disabled)
[    0.724650] type=2000 audit(1343078817.723:1): initialized
[    0.728321] VFS: Disk quotas dquot_6.5.2
[    0.728461] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.729218] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.729336] msgmni has been set to 7890
[    0.730545] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.730661] io scheduler noop registered
[    0.730831] io scheduler cfq registered (default)
[    0.731084] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.731201] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.731322] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.731441] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    0.731650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.731758] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.732014] intel_idle: does not run on family 6 model 23
[    0.734446] ACPI: AC Adapter [ADP1] (on-line)
[    0.734673] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.740377] ACPI: Lid Switch [LID0]
[    0.740516] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.740610] ACPI: Sleep Button [SLPB]
[    0.740741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.740832] ACPI: Power Button [PWRF]
[    0.740997] ACPI: Requesting acpi_cpufreq
[    0.741686] Monitor-Mwait will be used to enter C-1 state
[    0.741709] Monitor-Mwait will be used to enter C-2 state
[    0.741716] Marking TSC unstable due to TSC halts in idle
[    0.741790] ACPI: acpi_idle registered with cpuidle
[    0.761538] thermal LNXTHERM:00: registered as thermal_zone0
[    0.761608] ACPI: Thermal Zone [TZS0] (48 C)
[    0.766938] thermal LNXTHERM:01: registered as thermal_zone1
[    0.767015] ACPI: Thermal Zone [TZS1] (42 C)
[    0.771091] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.782448] Linux agpgart interface v0.103
[    0.782726] [drm] Initialized drm 1.1.0 20060810
[    0.782833] [drm] radeon defaulting to userspace modesetting.
[    0.784126] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.784195] [drm] No driver support for vblank timestamp query.
[    0.784263] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[    0.875792] ACPI: Battery Slot [BAT0] (battery present)
[    3.800032] floppy0: no floppy controllers found
[    3.802309] brd: module loaded
[    3.803528] loop: module loaded
[    3.803809] Loading iSCSI transport class v2.0-870.
[    3.804400] ahci 0000:00:1f.2: version 3.0
[    3.804476] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    3.804532] ahci: SSS flag set, parallel bus scan disabled
[    3.804631] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    3.804724] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
[    3.804818] ahci 0000:00:1f.2: setting latency timer to 64
[    3.810966] scsi0 : ahci
[    3.811208] scsi1 : ahci
[    3.811386] scsi2 : ahci
[    3.811559] scsi3 : ahci
[    3.811734] scsi4 : ahci
[    3.811906] scsi5 : ahci
[    3.812095] ata1: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504100 irq 44
[    3.812188] ata2: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504180 irq 44
[    3.812278] ata3: DUMMY
[    3.812342] ata4: DUMMY
[    3.812406] ata5: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504300 irq 44
[    3.812498] ata6: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504380 irq 44
[    3.813098] tg3.c:v3.123 (March 21, 2012)
[    3.854439] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:1f:16:bf:14:17
[    3.854536] tg3 0000:02:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    3.854629] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    3.854721] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    4.117025] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.118102] ata1.00: ATA-8: WDC WD5000BPVT-00A1YT0, 01.01A01, max UDMA/133
[    4.118178] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.119267] ata1.00: configured for UDMA/133
[    4.119445] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-0 01.0 PQ: 0 ANSI: 5
[    4.119744] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    4.119845] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.119960] sd 0:0:0:0: [sda] Write Protect is off
[    4.120045] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.120065] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.217170]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
[    4.217797] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.287479] ath: EEPROM regdomain: 0x65
[    4.287481] ath: EEPROM indicates we should expect a direct regpair map
[    4.287484] ath: Country alpha2 being used: 00
[    4.287486] ath: Regpair used: 0x65
[    4.290403] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    4.290753] Registered led device: ath9k-phy0
[    4.290759] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900100a0000, irq=17
[    4.291049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.291166] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    4.291170] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    4.291326] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    4.291444] ehci_hcd 0000:00:1a.7: debug port 1
[    4.295409] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    4.295432] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf4504800
[    4.301014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.301099] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.301168] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.301258] usb usb1: Product: EHCI Host Controller
[    4.301324] usb usb1: Manufacturer: Linux 3.4.6 ehci_hcd
[    4.301391] usb usb1: SerialNumber: 0000:00:1a.7
[    4.301606] hub 1-0:1.0: USB hub found
[    4.301675] hub 1-0:1.0: 4 ports detected
[    4.301880] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.301883] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.302035] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    4.302150] ehci_hcd 0000:00:1d.7: debug port 1
[    4.306091] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    4.306107] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4504c00
[    4.312011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.312111] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.312180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.312270] usb usb2: Product: EHCI Host Controller
[    4.312336] usb usb2: Manufacturer: Linux 3.4.6 ehci_hcd
[    4.312402] usb usb2: SerialNumber: 0000:00:1d.7
[    4.312607] hub 2-0:1.0: USB hub found
[    4.312675] hub 2-0:1.0: 8 ports detected
[    4.312897] uhci_hcd: USB Universal Host Controller Interface driver
[    4.312991] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.312995] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.313137] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    4.313254] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
[    4.313355] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.313424] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.313514] usb usb3: Product: UHCI Host Controller
[    4.313580] usb usb3: Manufacturer: Linux 3.4.6 uhci_hcd
[    4.313647] usb usb3: SerialNumber: 0000:00:1a.0
[    4.313846] hub 3-0:1.0: USB hub found
[    4.313914] hub 3-0:1.0: 2 ports detected
[    4.314110] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    4.314113] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.314249] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    4.314363] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
[    4.314463] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.314532] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.314622] usb usb4: Product: UHCI Host Controller
[    4.314688] usb usb4: Manufacturer: Linux 3.4.6 uhci_hcd
[    4.314754] usb usb4: SerialNumber: 0000:00:1a.1
[    4.314954] hub 4-0:1.0: USB hub found
[    4.315034] hub 4-0:1.0: 2 ports detected
[    4.315219] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.315223] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.315356] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    4.315469] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    4.315570] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    4.315638] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.315729] usb usb5: Product: UHCI Host Controller
[    4.315795] usb usb5: Manufacturer: Linux 3.4.6 uhci_hcd
[    4.315861] usb usb5: SerialNumber: 0000:00:1d.0
[    4.316079] hub 5-0:1.0: USB hub found
[    4.316147] hub 5-0:1.0: 2 ports detected
[    4.316334] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.316338] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.316472] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    4.316586] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001860
[    4.316686] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    4.316755] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.316845] usb usb6: Product: UHCI Host Controller
[    4.316911] usb usb6: Manufacturer: Linux 3.4.6 uhci_hcd
[    4.316977] usb usb6: SerialNumber: 0000:00:1d.1
[    4.317190] hub 6-0:1.0: USB hub found
[    4.317259] hub 6-0:1.0: 2 ports detected
[    4.317448] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.317452] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.317589] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    4.317714] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    4.317816] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    4.317884] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.317975] usb usb7: Product: UHCI Host Controller
[    4.318091] usb usb7: Manufacturer: Linux 3.4.6 uhci_hcd
[    4.318158] usb usb7: SerialNumber: 0000:00:1d.2
[    4.318366] hub 7-0:1.0: USB hub found
[    4.318435] hub 7-0:1.0: 2 ports detected
[    4.318621] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    4.318624] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    4.318754] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    4.318868] uhci_hcd 0000:00:1d.3: irq 18, io base 0x000018a0
[    4.318968] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    4.319061] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.319151] usb usb8: Product: UHCI Host Controller
[    4.319218] usb usb8: Manufacturer: Linux 3.4.6 uhci_hcd
[    4.319284] usb usb8: SerialNumber: 0000:00:1d.3
[    4.319486] hub 8-0:1.0: USB hub found
[    4.319554] hub 8-0:1.0: 2 ports detected
[    4.319869] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.330966] i8042: Detected active multiplexing controller, rev 1.1
[    4.341218] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.341289] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.341380] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.341474] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.341562] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.341836] mousedev: PS/2 mouse device common for all mice
[    4.341969] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[    4.342157] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.342289] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    4.342478] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[    4.342616] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.342719] cpuidle: using governor ladder
[    4.342824] cpuidle: using governor menu
[    4.343396] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[    4.343469] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[    4.344155] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    4.365648] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[    4.365813] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    4.365971] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    4.366693] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[    4.367262] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[    4.370685] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[    4.371174] TCP: cubic registered
[    4.371241] NET: Registered protocol family 17
[    4.371314] Registering the dns_resolver key type
[    4.372354] ALSA device list:
[    4.372421]   #0: HDA Intel at 0xf4500000 irq 45
[    4.372487]   #1: HDA ATI HDMI at 0xf4010000 irq 46
[    4.426061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.427629] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, 1.01, max UDMA/100
[    4.429418] ata2.00: configured for UDMA/100
[    4.431082] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     1.01 PQ: 0 ANSI: 5
[    4.433900] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.433993] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.434319] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.674048] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[    4.739051] ata5: SATA link down (SStatus 0 SControl 300)
[    4.827743] usb 2-5: New USB device found, idVendor=064e, idProduct=a103
[    4.827813] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    4.827882] usb 2-5: Product: Video WebCam
[    4.827948] usb 2-5: Manufacturer: SuYin
[    4.828021] usb 2-5: SerialNumber: CN0314-SN30-OV035-VA-R05.00.00
[    5.036060] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[    5.044050] ata6: SATA link down (SStatus 0 SControl 300)
[    5.095196] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    5.139015] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.139117] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[    5.182167] devtmpfs: mounted
[    5.182320] Freeing unused kernel memory: 660k freed
[    5.197584] usb 5-1: New USB device found, idVendor=093a, idProduct=2510
[    5.197657] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.197726] usb 5-1: Product: USB OPTICAL MOUSE
[    5.197792] usb 5-1: Manufacturer: PIXART
[    6.072798] udev[1013]: starting version 165
[    6.330395] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.330574] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    6.407949] Linux video capture interface: v2.00
[    6.426455] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
[    6.442978] input: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input8
[    6.443168] usbcore: registered new interface driver uvcvideo
[    6.443242] USB Video Class driver (1.1.1)
[    6.512883] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input9
[    6.513133] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[    6.513258] usbcore: registered new interface driver usbhid
[    6.513347] usbhid: USB HID core driver
[    7.277698] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000
[    7.335075] Adding 10257496k swap on /dev/sda3.  Priority:-1 extents:1 across:10257496k
[    7.336201] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[    7.426680] fuse init (API version 7.18)
[    7.529383] EXT4-fs (sda1): re-mounted. Opts: (null)
[    7.862252] EXT4-fs (sda1): re-mounted. Opts: (null)
[    8.134196] lp: driver loaded but no devices found
[    8.134198] ppdev: user-space parallel port driver
[   12.655231] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   12.748281] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   12.798900] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[   12.799012] REISERFS (device sda8): using ordered data mode
[   12.799081] reiserfs: using flush barriers
[   12.802271] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   12.803354] REISERFS (device sda8): checking transaction log (sda8)
[   13.266525] REISERFS (device sda8): Using r5 hash to sort names
[   41.064720] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[   44.738563] tg3 0000:02:00.0: wake-up capability enabled by ACPI
[   44.764283] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[   48.197209] wlan0: authenticate with 00:22:6b:f6:29:15
[   48.206807] wlan0: send auth to 00:22:6b:f6:29:15 (try 1/3)
[   48.208930] wlan0: authenticated
[   48.219021] wlan0: associate with 00:22:6b:f6:29:15 (try 1/3)
[   48.222876] wlan0: RX AssocResp from 00:22:6b:f6:29:15 (capab=0x411 status=0 aid=1)
[   48.232021] wlan0: associated
[   69.152589] [drm] Setting GART location based on new memory map
[   69.152877] [drm] Loading RV710 CP Microcode
[   69.223215] [drm] Resetting GPU
[   69.223274] [drm] writeback test succeeded in 1 usecs

Grazie a tutti per le risposte.
Ultima modifica di Xunyl il mer lug 25, 2012 15:34, modificato 1 volta in totale.
Xunyl
Linux 2.0
Linux 2.0
 
Messaggi: 156
Iscritto il: gio gen 28, 2010 15:57
Slackware: 14 - 64 bit
Kernel: 3.6.2
Desktop: openbox

Re: Migliorie compilazione kernel

Messaggioda slux » lun lug 23, 2012 21:20

Ciao,
da quel che vedo forse hai tralasciato il supporto USB MASS STORAGE,in quanto i driver del controller USB ed il driver disco SD ci sono.Prova a caricarlo a mano con modprobe e se non esiste,abilitalo nel kernel.
Avatar utente
slux
Linux 2.6
Linux 2.6
 
Messaggi: 782
Iscritto il: dom mar 20, 2005 0:00
Località: Prato
Nome Cognome: Andrea Amerini
Slackware: 14.1 x86
Kernel: 3.12.0-smp
Desktop: xfce 4.10

Re: Migliorie compilazione kernel

Messaggioda Xunyl » mer lug 25, 2012 5:16

Peeerfetto, ora ci siamo, ho aggiunto anche altre cose come il supporto ad alcuni fs che avevo tolto e i native language support, funge! Grazie mille :D
Un'ultima cosa, dal dmesg vedo alcune righe che non riesco a comprendere, mi riferisco a queste:

Codice: Seleziona tutto
[    5.709178] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    5.725153] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)

Codice: Seleziona tutto
[    4.362219] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)

Codice: Seleziona tutto
[    3.938217] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Che tipo di errori sono? Dove devo mettere le mani?
Xunyl
Linux 2.0
Linux 2.0
 
Messaggi: 156
Iscritto il: gio gen 28, 2010 15:57
Slackware: 14 - 64 bit
Kernel: 3.6.2
Desktop: openbox

Re: Migliorie compilazione kernel

Messaggioda slux » mer lug 25, 2012 8:21

Dunque,
il primo errore è perchè tenta prima di montare una partizioni ext4 con i driver ext2 o ext3,nulla di che.

Il secondo invece dipende dalla motherboard.Conflitti ACPI vari,che forse puoi risolvere con un'aggiornamento del BIOS,ma non ci sperare troppo.Questi errori sono molto comuni,il tutto purtroppo per fare contento windows ,che non rispetta le specifiche ACPI.Tuttavia , a parte l'estetica,non dovresti avere problemi.

Il terzo non è un'errore,ma solo un report sulle caratteristiche supportate dal tuo disco.Cerca su wikipedia o su google DPO e FUA per approfondimenti.
Avatar utente
slux
Linux 2.6
Linux 2.6
 
Messaggi: 782
Iscritto il: dom mar 20, 2005 0:00
Località: Prato
Nome Cognome: Andrea Amerini
Slackware: 14.1 x86
Kernel: 3.12.0-smp
Desktop: xfce 4.10

Re: Migliorie compilazione kernel

Messaggioda Xunyl » mer lug 25, 2012 15:34

Ok, ora è tutto chiaro. Direi che il problema è risolto, grazie mille!
Xunyl
Linux 2.0
Linux 2.0
 
Messaggi: 156
Iscritto il: gio gen 28, 2010 15:57
Slackware: 14 - 64 bit
Kernel: 3.6.2
Desktop: openbox


Torna a Gnu/Linux in genere

Chi c’è in linea

Visitano il forum: Nessuno e 3 ospiti

cron