Driver Intel graphic HD

[danelius]

Ciao ragazzi! Ci sono driver (proprietari e non) per questa scheda?

[joseph]

Dipende che modello. Ci sono dei driver implementati gia nei nuovi kernel, ma bisogna sempre vedere il modello preciso.

[danelius]

è questo qua il notebook: http://www.amazon.it/gp/product/B008DSYBBA/ref=olp_product_details/279-6953077-2558850?ie=UTF8&me=&seller=

[414N]

Intel è l'unico produttore che produce, su Linux, solo driver opensource direttamente.
Tanto per dire, al momento Nvidia di driver opensource se ne sbatte altamente (i driver nouveau sono frutto di reverse engineering da parte di una comunità di sviluppatori indipendenti) mentre AMD rilascia almeno un po' di documentazione e supporta lo sviluppo dei driver open tramite uno (sparuto) gruppo di sviluppatori dedicato.
Il driver 3D Intel è sviluppato all'interno di mesa, e nelle ultime versioni ha fatto passi da gigante. Ovviamente, visto l'hardware in questione, non è che ci puoi far girare Doom 6 sopra, nonostante il buon supporto in Linux

[danelius]

Beh certo lo sapevo, infatti quando l'ho acquistato non ho avuto molte pretese , però lo vorrei con i driver a posto
Ma quindi non ho capito, non c'è un pacchetto che si installa a parte? Perchè nel file xorg.conf ho visto che la scheda viene vista non come "Intel" ma come "Vesa"

[targzeta]

Prova a spostare il file xorg.conf e vedi nell'output di Xorg (/var/log/Xorg.0.log) se viene usato il driver Intel o quello Vesa. Senza il file xorg.conf, il server X prova ad autoconfigurarsi.

Emanuele

P.S. Ovviamente se hai una Slackware abbastanza recente...ora non ricordo di preciso da quando è iniziato il supporto a Hal (poi abbandonato...meno male) e a udev.

[414N]

Nessun pacchetto a parte, dato che il supporto all'accelerazione hardware in X la trovi in xf86-video-intel e il supporto hardware all'accelerazione 3D lo trovi in mesa (entrambi presenti nel disco di installazione di Slackware).
Il file xorg.conf è un file di configurazione, non un log di autorilevamento periferche percui, se c'è scritto di usare come driver vesa, non è che Xorg non riconosca la scheda video come intel, ma gli è stato imposto di caricare vesa invece di arrangiarsi.
Se hai una Slackware più nuova della 13.0, il file xorg.conf è inutile (a meno di non necessitare di particolari configurazione non azzeccate in automatico da udev) e potresti eliminarlo, ma se ti riferisci al file xorg.conf.vesa quello è solo un file di esempio su come scrivere un file xorg.conf usando vesa come driver video (non viene letto da X all'avvio).
Per capire quale driver video viene effettivamente usato da X, spulcia il log di X in /var/log/Xorg.0.log.
EDIT: preceduto

[danelius]

Hai ragione 414N il file è xorg.conf.vesa! Credevo fosse il classico xorg.conf ....comunque il file log mi da questo:

Codice: Seleziona tutto

[    24.323]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[    24.323] X Protocol Version 11, Revision 0
[    24.323] Build Operating System: Slackware 13.37 Slackware Linux Project
[    24.323] Current Operating System: Linux darkstar 2.6.37.6 #3 SMP Sat Apr 9 22:49:32 CDT 2011 x86_64
[    24.323] Kernel command line: auto BOOT_IMAGE=Linux ro root=803 quiet vt.default_utf8=1
[    24.323] Build Date: 17 March 2011  10:50:17PM
[    24.323] 
[    24.323] Current version of pixman: 0.20.2
[    24.323]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    24.323] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.323] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 14 17:21:23 2012
[    24.415] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    24.415] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.455] (==) No Layout section.  Using the first Screen section.
[    24.455] (==) No screen section available. Using defaults.
[    24.455] (**) |-->Screen "Default Screen Section" (0)
[    24.455] (**) |   |-->Monitor "<default monitor>"
[    24.455] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    24.455] (==) Automatically adding devices
[    24.455] (==) Automatically enabling devices
[    24.479] (WW) The directory "/usr/share/fonts/local" does not exist.
[    24.479]    Entry deleted from font path.
[    24.502] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    24.502]    Entry deleted from font path.
[    24.503] (WW) The directory "/usr/share/fonts/CID" does not exist.
[    24.503]    Entry deleted from font path.
[    24.518] (==) FontPath set to:
   /usr/share/fonts/TTF,
   /usr/share/fonts/Type1,
   /usr/share/fonts/misc,
   /usr/share/fonts/75dpi/:unscaled,
   /usr/share/fonts/100dpi/:unscaled,
   /usr/share/fonts/75dpi,
   /usr/share/fonts/100dpi,
   /usr/share/fonts/cyrillic
[    24.518] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    24.518] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.518] (II) Loader magic: 0x7d2500
[    24.518] (II) Module ABI versions:
[    24.518]    X.Org ANSI C Emulation: 0.4
[    24.518]    X.Org Video Driver: 8.0
[    24.518]    X.Org XInput driver : 11.0
[    24.518]    X.Org Server Extension : 4.0
[    24.518] (--) PCI:*(0:0:2:0) 8086:0106:10cf:15ea rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[    24.519] (II) Open ACPI successful (/var/run/acpid.socket)
[    24.519] (II) LoadModule: "extmod"
[    24.526] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    24.543] (II) Module extmod: vendor="X.Org Foundation"
[    24.543]    compiled for 1.9.5, module version = 1.0.0
[    24.543]    Module class: X.Org Server Extension
[    24.543]    ABI class: X.Org Server Extension, version 4.0
[    24.543] (II) Loading extension MIT-SCREEN-SAVER
[    24.543] (II) Loading extension XFree86-VidModeExtension
[    24.543] (II) Loading extension XFree86-DGA
[    24.543] (II) Loading extension DPMS
[    24.543] (II) Loading extension XVideo
[    24.543] (II) Loading extension XVideo-MotionCompensation
[    24.543] (II) Loading extension X-Resource
[    24.543] (II) LoadModule: "dbe"
[    24.543] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    24.544] (II) Module dbe: vendor="X.Org Foundation"
[    24.544]    compiled for 1.9.5, module version = 1.0.0
[    24.544]    Module class: X.Org Server Extension
[    24.544]    ABI class: X.Org Server Extension, version 4.0
[    24.544] (II) Loading extension DOUBLE-BUFFER
[    24.544] (II) LoadModule: "glx"
[    24.544] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    24.569] (II) Module glx: vendor="X.Org Foundation"
[    24.569]    compiled for 1.9.5, module version = 1.0.0
[    24.569]    ABI class: X.Org Server Extension, version 4.0
[    24.569] (==) AIGLX enabled
[    24.569] (II) Loading extension GLX
[    24.570] (II) LoadModule: "record"
[    24.570] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    24.573] (II) Module record: vendor="X.Org Foundation"
[    24.573]    compiled for 1.9.5, module version = 1.13.0
[    24.573]    Module class: X.Org Server Extension
[    24.573]    ABI class: X.Org Server Extension, version 4.0
[    24.573] (II) Loading extension RECORD
[    24.573] (II) LoadModule: "dri"
[    24.573] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[    24.588] (II) Module dri: vendor="X.Org Foundation"
[    24.588]    compiled for 1.9.5, module version = 1.0.0
[    24.588]    ABI class: X.Org Server Extension, version 4.0
[    24.588] (II) Loading extension XFree86-DRI
[    24.588] (II) LoadModule: "dri2"
[    24.588] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    24.589] (II) Module dri2: vendor="X.Org Foundation"
[    24.589]    compiled for 1.9.5, module version = 1.2.0
[    24.589]    ABI class: X.Org Server Extension, version 4.0
[    24.589] (II) Loading extension DRI2
[    24.589] (==) Matched intel as autoconfigured driver 0
[    24.589] (==) Matched vesa as autoconfigured driver 1
[    24.589] (==) Matched fbdev as autoconfigured driver 2
[    24.589] (==) Assigned the driver to the xf86ConfigLayout
[    24.589] (II) LoadModule: "intel"
[    24.604] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[    24.623] (II) Module intel: vendor="X.Org Foundation"
[    24.623]    compiled for 1.9.5, module version = 2.15.0
[    24.623]    Module class: X.Org Video Driver
[    24.623]    ABI class: X.Org Video Driver, version 8.0
[    24.623] (II) LoadModule: "vesa"
[    24.623] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    24.630] (II) Module vesa: vendor="X.Org Foundation"
[    24.630]    compiled for 1.9.2, module version = 2.3.0
[    24.630]    Module class: X.Org Video Driver
[    24.630]    ABI class: X.Org Video Driver, version 8.0
[    24.630] (II) LoadModule: "fbdev"
[    24.633] (WW) Warning, couldn't open module fbdev
[    24.633] (II) UnloadModule: "fbdev"
[    24.633] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    24.633] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
   Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
   Sandybridge, Sandybridge
[    24.633] (II) VESA: driver for VESA chipsets: vesa
[    24.633] (++) using VT number 7

[    24.639] (WW) Falling back to old probe method for vesa
[    24.639] drmOpenDevice: node name is /dev/dri/card0
[    24.639] drmOpenDevice: open result is 9, (OK)
[    24.639] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    24.639] drmOpenDevice: node name is /dev/dri/card0
[    24.639] drmOpenDevice: open result is 9, (OK)
[    24.639] drmOpenByBusid: drmOpenMinor returns 9
[    24.640] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    24.640] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    24.640] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    24.640] (==) intel(0): RGB weight 888
[    24.640] (==) intel(0): Default visual is TrueColor
[    24.640] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge
[    24.640] (--) intel(0): Chipset: "Sandybridge"
[    24.640] (**) intel(0): Relaxed fencing disabled
[    24.640] (**) intel(0): Framebuffer tiled
[    24.640] (**) intel(0): Pixmaps tiled
[    24.640] (**) intel(0): 3D buffers tiled
[    24.640] (**) intel(0): SwapBuffers wait disabled
[    24.640] (==) intel(0): video overlay key set to 0x101fe
[    24.655] (II) intel(0): Output LVDS1 has no monitor section
[    24.655] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    24.655] (II) intel(0): Output VGA1 has no monitor section
[    24.660] (II) intel(0): Output HDMI1 has no monitor section
[    24.661] (II) intel(0): Output DP1 has no monitor section
[    24.661] (II) intel(0): EDID for output LVDS1
[    24.661] (II) intel(0): Manufacturer: SEC  Model: 5641  Serial#: 0
[    24.661] (II) intel(0): Year: 2009  Week: 0
[    24.661] (II) intel(0): EDID Version: 1.3
[    24.661] (II) intel(0): Digital Display Input
[    24.661] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    24.661] (II) intel(0): Gamma: 2.20
[    24.661] (II) intel(0): No DPMS capabilities specified
[    24.661] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    24.661] (II) intel(0): First detailed timing is preferred mode
[    24.661] (II) intel(0): redX: 0.620 redY: 0.355   greenX: 0.300 greenY: 0.580
[    24.661] (II) intel(0): blueX: 0.150 blueY: 0.090   whiteX: 0.313 whiteY: 0.329
[    24.661] (II) intel(0): Manufacturer's mask: 0
[    24.661] (II) intel(0): Supported detailed timing:
[    24.661] (II) intel(0): clock: 72.3 MHz   Image Size:  344 x 193 mm
[    24.661] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    24.661] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    24.661] (II) intel(0): Unknown vendor-specific block f
[    24.661] (II) intel(0):  SAMSUNG
[    24.661] (II) intel(0):  156AT05-F01
[    24.661] (II) intel(0): EDID (in hex):
[    24.661] (II) intel(0):    00ffffffffffff004ca3415600000000
[    24.662] (II) intel(0):    00130103802213780ace859e5b4c9426
[    24.662] (II) intel(0):    17505400000001010101010101010101
[    24.662] (II) intel(0):    010101010101411c56a0500016303020
[    24.662] (II) intel(0):    250058c1100000190000000f00000000
[    24.662] (II) intel(0):    00000000001eb4027400000000fe0053
[    24.662] (II) intel(0):    414d53554e470a2020202020000000fe
[    24.662] (II) intel(0):    00313536415430352d4630310a2000c6
[    24.662] (II) intel(0): EDID vendor "SEC", prod id 22081
[    24.662] (II) intel(0): Printing DDC gathered Modelines:
[    24.662] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    24.662] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    24.662] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    24.662] (II) intel(0): Printing probed modes for output LVDS1
[    24.662] (II) intel(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    24.662] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    24.662] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    24.662] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    24.662] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    24.662] (II) intel(0): EDID for output VGA1
[    24.667] (II) intel(0): EDID for output HDMI1
[    24.668] (II) intel(0): EDID for output DP1
[    24.668] (II) intel(0): Output LVDS1 connected
[    24.668] (II) intel(0): Output VGA1 disconnected
[    24.668] (II) intel(0): Output HDMI1 disconnected
[    24.668] (II) intel(0): Output DP1 disconnected
[    24.668] (II) intel(0): Using exact sizes for initial modes
[    24.668] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    24.668] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    24.668] (II) intel(0): Kernel page flipping support detected, enabling
[    24.668] (**) intel(0): Display dimensions: (340, 190) mm
[    24.668] (**) intel(0): DPI set to (102, 102)
[    24.668] (II) Loading sub module "fb"
[    24.668] (II) LoadModule: "fb"
[    24.668] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    24.676] (II) Module fb: vendor="X.Org Foundation"
[    24.676]    compiled for 1.9.5, module version = 1.0.0
[    24.676]    ABI class: X.Org ANSI C Emulation, version 0.4
[    24.676] (II) Loading sub module "dri2"
[    24.676] (II) LoadModule: "dri2"
[    24.676] (II) Reloading /usr/lib64/xorg/modules/extensions/libdri2.so
[    24.676] (II) UnloadModule: "vesa"
[    24.676] (II) Unloading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    24.676] (==) Depth 24 pixmap format is 32 bpp
[    24.676] (II) intel(0): [DRI2] Setup complete
[    24.676] (II) intel(0): [DRI2]   DRI driver: i965
[    24.676] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    24.684] (II) UXA(0): Driver registered support for the following operations:
[    24.684] (II)         solid
[    24.684] (II)         copy
[    24.684] (II)         composite (RENDER acceleration)
[    24.684] (II)         put_image
[    24.684] (II)         get_image
[    24.684] (==) intel(0): Backing store disabled
[    24.684] (==) intel(0): Silken mouse enabled
[    24.685] (II) intel(0): Initializing HW Cursor
[    24.689] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    24.689] (==) intel(0): DPMS enabled
[    24.689] (==) intel(0): Intel XvMC decoder enabled
[    24.689] (II) intel(0): Set up textured video
[    24.689] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    24.689] (II) intel(0): direct rendering: DRI2 Enabled
[    24.689] (==) intel(0): hotplug detection: "enabled"
[    24.690] (--) RandR disabled
[    24.690] (II) Initializing built-in extension Generic Event Extension
[    24.690] (II) Initializing built-in extension SHAPE
[    24.690] (II) Initializing built-in extension MIT-SHM
[    24.690] (II) Initializing built-in extension XInputExtension
[    24.690] (II) Initializing built-in extension XTEST
[    24.690] (II) Initializing built-in extension BIG-REQUESTS
[    24.690] (II) Initializing built-in extension SYNC
[    24.690] (II) Initializing built-in extension XKEYBOARD
[    24.690] (II) Initializing built-in extension XC-MISC
[    24.690] (II) Initializing built-in extension XINERAMA
[    24.690] (II) Initializing built-in extension XFIXES
[    24.690] (II) Initializing built-in extension RENDER
[    24.690] (II) Initializing built-in extension RANDR
[    24.690] (II) Initializing built-in extension COMPOSITE
[    24.690] (II) Initializing built-in extension DAMAGE
[    24.783] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    24.783] (II) AIGLX: enabled GLX_INTEL_swap_event
[    24.783] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    24.783] (II) AIGLX: enabled GLX_SGI_make_current_read
[    24.783] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    24.783] (II) AIGLX: Loaded and initialized /usr/lib64/xorg/modules/dri/i965_dri.so
[    24.783] (II) GLX: Initialized DRI2 GL provider for screen 0
[    24.784] (II) intel(0): Setting screen physical size to 361 x 203
[    25.233] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    25.234] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.234] (**) Power Button: Applying InputClass "keyboard-all"
[    25.234] (**) Power Button: Applying InputClass "Keyboard settings"
[    25.234] (II) LoadModule: "evdev"
[    25.234] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    25.252] (II) Module evdev: vendor="X.Org Foundation"
[    25.252]    compiled for 1.9.3, module version = 2.6.0
[    25.252]    Module class: X.Org XInput Driver
[    25.252]    ABI class: X.Org XInput driver, version 11.0
[    25.253] (**) Power Button: always reports core events
[    25.253] (**) Power Button: Device: "/dev/input/event4"
[    25.258] (--) Power Button: Found keys
[    25.258] (II) Power Button: Configuring as keyboard
[    25.258] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    25.258] (**) Option "xkb_rules" "evdev"
[    25.258] (**) Option "xkb_model" "evdev"
[    25.258] (**) Option "xkb_layout" "it"
[    25.258] (WW) Option "xkb_variant" requires an string value
[    25.258] (WW) Option "XkbVariant" requires an string value
[    25.258] (WW) Option "xkb_options" requires an string value
[    25.258] (WW) Option "XkbOptions" requires an string value
[    25.305] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event6)
[    25.305] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
[    25.305] (**) Fujitsu FUJ02E3: Applying InputClass "keyboard-all"
[    25.305] (**) Fujitsu FUJ02E3: Applying InputClass "Keyboard settings"
[    25.305] (**) Fujitsu FUJ02E3: always reports core events
[    25.305] (**) Fujitsu FUJ02E3: Device: "/dev/input/event6"
[    25.308] (--) Fujitsu FUJ02E3: Found keys
[    25.308] (II) Fujitsu FUJ02E3: Configuring as keyboard
[    25.308] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD)
[    25.308] (**) Option "xkb_rules" "evdev"
[    25.308] (**) Option "xkb_model" "evdev"
[    25.308] (**) Option "xkb_layout" "it"
[    25.308] (WW) Option "xkb_variant" requires an string value
[    25.308] (WW) Option "XkbVariant" requires an string value
[    25.308] (WW) Option "xkb_options" requires an string value
[    25.308] (WW) Option "XkbOptions" requires an string value
[    25.310] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    25.310] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    25.310] (**) Video Bus: Applying InputClass "keyboard-all"
[    25.310] (**) Video Bus: Applying InputClass "Keyboard settings"
[    25.310] (**) Video Bus: always reports core events
[    25.310] (**) Video Bus: Device: "/dev/input/event11"
[    25.313] (--) Video Bus: Found keys
[    25.313] (II) Video Bus: Configuring as keyboard
[    25.313] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    25.313] (**) Option "xkb_rules" "evdev"
[    25.313] (**) Option "xkb_model" "evdev"
[    25.313] (**) Option "xkb_layout" "it"
[    25.313] (WW) Option "xkb_variant" requires an string value
[    25.313] (WW) Option "XkbVariant" requires an string value
[    25.313] (WW) Option "xkb_options" requires an string value
[    25.313] (WW) Option "XkbOptions" requires an string value
[    25.314] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event5)
[    25.314] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
[    25.314] (**) Fujitsu FUJ02B1: Applying InputClass "keyboard-all"
[    25.314] (**) Fujitsu FUJ02B1: Applying InputClass "Keyboard settings"
[    25.314] (**) Fujitsu FUJ02B1: always reports core events
[    25.314] (**) Fujitsu FUJ02B1: Device: "/dev/input/event5"
[    25.323] (--) Fujitsu FUJ02B1: Found keys
[    25.323] (II) Fujitsu FUJ02B1: Configuring as keyboard
[    25.323] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD)
[    25.323] (**) Option "xkb_rules" "evdev"
[    25.323] (**) Option "xkb_model" "evdev"
[    25.323] (**) Option "xkb_layout" "it"
[    25.323] (WW) Option "xkb_variant" requires an string value
[    25.323] (WW) Option "XkbVariant" requires an string value
[    25.323] (WW) Option "xkb_options" requires an string value
[    25.323] (WW) Option "XkbOptions" requires an string value
[    25.329] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    25.329] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.329] (**) Power Button: Applying InputClass "keyboard-all"
[    25.329] (**) Power Button: Applying InputClass "Keyboard settings"
[    25.329] (**) Power Button: always reports core events
[    25.329] (**) Power Button: Device: "/dev/input/event2"
[    25.335] (--) Power Button: Found keys
[    25.335] (II) Power Button: Configuring as keyboard
[    25.335] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    25.335] (**) Option "xkb_rules" "evdev"
[    25.335] (**) Option "xkb_model" "evdev"
[    25.335] (**) Option "xkb_layout" "it"
[    25.335] (WW) Option "xkb_variant" requires an string value
[    25.335] (WW) Option "XkbVariant" requires an string value
[    25.335] (WW) Option "xkb_options" requires an string value
[    25.335] (WW) Option "XkbOptions" requires an string value
[    25.336] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    25.336] (II) No input driver/identifier specified (ignoring)
[    25.340] (II) config/udev: Adding input device FJ Camera (/dev/input/event7)
[    25.340] (**) FJ Camera: Applying InputClass "evdev keyboard catchall"
[    25.340] (**) FJ Camera: Applying InputClass "keyboard-all"
[    25.340] (**) FJ Camera: Applying InputClass "Keyboard settings"
[    25.340] (**) FJ Camera: always reports core events
[    25.340] (**) FJ Camera: Device: "/dev/input/event7"
[    25.347] (--) FJ Camera: Found keys
[    25.347] (II) FJ Camera: Configuring as keyboard
[    25.347] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD)
[    25.347] (**) Option "xkb_rules" "evdev"
[    25.347] (**) Option "xkb_model" "evdev"
[    25.347] (**) Option "xkb_layout" "it"
[    25.347] (WW) Option "xkb_variant" requires an string value
[    25.347] (WW) Option "XkbVariant" requires an string value
[    25.347] (WW) Option "xkb_options" requires an string value
[    25.347] (WW) Option "XkbOptions" requires an string value
[    25.349] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    25.349] (II) No input driver/identifier specified (ignoring)
[    25.350] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    25.350] (II) No input driver/identifier specified (ignoring)
[    25.360] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[    25.361] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    25.361] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[    25.361] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard settings"
[    25.361] (**) AT Translated Set 2 keyboard: always reports core events
[    25.361] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[    25.367] (--) AT Translated Set 2 keyboard: Found keys
[    25.367] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    25.367] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    25.367] (**) Option "xkb_rules" "evdev"
[    25.367] (**) Option "xkb_model" "evdev"
[    25.367] (**) Option "xkb_layout" "it"
[    25.367] (WW) Option "xkb_variant" requires an string value
[    25.367] (WW) Option "XkbVariant" requires an string value
[    25.367] (WW) Option "xkb_options" requires an string value
[    25.367] (WW) Option "XkbOptions" requires an string value
[    25.368] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    25.368] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    25.368] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[    25.368] (II) LoadModule: "synaptics"
[    25.370] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    25.371] (II) Module synaptics: vendor="X.Org Foundation"
[    25.371]    compiled for 1.9.4, module version = 1.4.0
[    25.371]    Module class: X.Org XInput Driver
[    25.371]    ABI class: X.Org XInput driver, version 11.0
[    25.371] (**) Option "Device" "/dev/input/event8"
[    25.408] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5682
[    25.408] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4692
[    25.408] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    25.408] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    25.408] (--) SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
[    25.408] (**) Option "TapButton1" "1"
[    25.408] (**) Option "TapButton2" "2"
[    25.408] (**) Option "TapButton3" "3"
[    25.440] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    25.440] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.456] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    25.456] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    25.456] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    25.456] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[    25.456] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    25.456] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    25.456] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    25.456] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    25.480] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    25.480] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    25.480] (II) No input driver/identifier specified (ignoring)
[    25.487] (II) config/udev: Adding input device Speakup (/dev/input/event0)
[    25.487] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[    25.487] (**) Speakup: Applying InputClass "keyboard-all"
[    25.487] (**) Speakup: Applying InputClass "Keyboard settings"
[    25.487] (**) Speakup: always reports core events
[    25.487] (**) Speakup: Device: "/dev/input/event0"
[    25.492] (--) Speakup: Found keys
[    25.492] (II) Speakup: Configuring as keyboard
[    25.492] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD)
[    25.492] (**) Option "xkb_rules" "evdev"
[    25.492] (**) Option "xkb_model" "evdev"
[    25.492] (**) Option "xkb_layout" "it"
[    25.492] (WW) Option "xkb_variant" requires an string value
[    25.492] (WW) Option "XkbVariant" requires an string value
[    25.492] (WW) Option "xkb_options" requires an string value
[    25.492] (WW) Option "XkbOptions" requires an string value
[    29.147] (II) intel(0): EDID vendor "SEC", prod id 22081
[    29.147] (II) intel(0): Printing DDC gathered Modelines:
[    29.147] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    29.158] (II) intel(0): EDID vendor "SEC", prod id 22081
[    29.158] (II) intel(0): Printing DDC gathered Modelines:
[    29.158] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    29.171] (II) intel(0): EDID vendor "SEC", prod id 22081
[    29.171] (II) intel(0): Printing DDC gathered Modelines:
[    29.171] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    35.191] (II) intel(0): EDID vendor "SEC", prod id 22081
[    35.191] (II) intel(0): Printing DDC gathered Modelines:
[    35.191] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[    35.197] (II) intel(0): EDID vendor "SEC", prod id 22081
[    35.197] (II) intel(0): Printing DDC gathered Modelines:
[    35.197] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[  3829.576] (II) intel(0): EDID vendor "SEC", prod id 22081
[  3829.576] (II) intel(0): Printing DDC gathered Modelines:
[  3829.576] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[  5404.505] (II) intel(0): EDID vendor "SEC", prod id 22081
[  5404.505] (II) intel(0): Printing DDC gathered Modelines:
[  5404.505] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[  5404.658] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 322194 < target_msc 322195
[  5602.840] (II) intel(0): EDID vendor "SEC", prod id 22081
[  5602.840] (II) intel(0): Printing DDC gathered Modelines:
[  5602.840] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[  5602.971] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 334034 < target_msc 334035
[  6062.809] (II) intel(0): EDID vendor "SEC", prod id 22081
[  6062.809] (II) intel(0): Printing DDC gathered Modelines:
[  6062.809] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[  6063.019] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 361500 < target_msc 361501
[  6428.424] (II) intel(0): EDID vendor "SEC", prod id 22081
[  6428.424] (II) intel(0): Printing DDC gathered Modelines:
[  6428.424] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[  6428.602] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 383327 < target_msc 383328
[  6437.310] (WW) intel(0): I830DRI2FlipEventHandler: Pageflip completion has impossible msc 383847 < target_msc 383848
[  6534.906] (II) intel(0): EDID vendor "SEC", prod id 22081
[  6534.906] (II) intel(0): Printing DDC gathered Modelines:
[  6534.906] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[  6780.426] (II) intel(0): EDID vendor "SEC", prod id 22081
[  6780.426] (II) intel(0): Printing DDC gathered Modelines:
[  6780.426] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)


credo che allora riconosca la scheda come intel... ma allora perkè sto caspita di compiz-fusion non mi funziona?? -.-
scrivo: compiz --replace cpp
e mi da sempre errore: compiz (core): couldn't load plugin cpp
Ho provato pure questi altri comandi:
LIBGL_ALWAYS_INDIRECT=true compiz --replace --indirect-rendering ccp &
questo:
LIBGL_ALWAYS_INDIRECT=true INTEL_BATCH=1 compiz --replace --indirect-rendering --sm-disable ccp &
e pure questo:
compiz --replace --sm-disable --ignore-desktop-hints ccp
ma mi fa gli effetti grafici sballati (tipo che manca il riquadro, oppure mi fa un'eccessiva trasparenza, e cose così)
Ho aggiornato il file protobuf, il libcompizconfig...ecc ecc.. Le ho provate tutte...e ad un certo punto credevo fosse problema di driver intel...ma che caspita è allora?

[414N]

Ma lasciando perdere ccp, che evidentemente non hai installato?
Io, ai tempi di Slackware 12.X usavo la seguente riga di comando per avviarlo all'interno di una sessione kde:

Codice: Seleziona tutto

LIBGL_ALWAYS_INDIRECT=1 compiz --indirect-rendering --replace decoration clone minimize move place png regex resize screenshot water blur zoom wobbly fade cube switcher scale rotate ini &
kde-window-decorator --replace &


Essendo dotato di una scheda intel, credo tu possa tralasciare la roba relativa all'indirect rendering che mi era necessario usare su una scheda ATI.

[danelius]

ecco il risultato:

Codice: Seleziona tutto

dany[~]$ kde-window-decorator --replace &compiz (ini) - Warn: Could not open main display config file /home/dany/.compiz/options/general-allscreens.conf
compiz (ini) - Warn: Loading default plugins (ini,inotify,png,decoration,move,resize,switcher)
compiz (ini) - Error: Failed to write to /home/dany/.compiz/options/core-allscreens.conf, check you have the correct permissions
compiz (ini) - Warn: Could not open config file /home/dany/.compiz/options/general-screen0.conf - using defaults for core
compiz (ini) - Error: Failed to write to /home/dany/.compiz/options/core-allscreens.conf, check you have the correct permissions

[targzeta]

Beh, sembra che non hai i permessi di scrittura in ~/.compiz. Prova a dare:

Codice: Seleziona tutto

chmor -R u+w ~/.compiz

oppure semplicemente elimina la directory (~/.compiz intendo). Se non hai dati importanti, dovrebbe ricrearla lui.

Emanuele

P.S. usa i tab 'code' quando poi l'output di un programma. Il post precedente te lo correggo io.

[danelius]

ok grazie per la correzione.
Ma la directory compiz non c'è proprio! ma non è che ci vuole qualke pacchetto attinente a "kde-window-decorator" che mi indica poi nell'errore?

[targzeta]

La directory si chiama ~/.compiz e non ~/compiz (nota il '.'). Assicurati che puoi creare file o directory nella tua home, magari è solo un problema di permessi. Ad esempio, il comando

Codice: Seleziona tutto

touch ~/casa

va a buon fine? Il file 'casa' viene creato?

Emanuele

[danelius]

si si, intendi che la directory è nascosta, lo so...ma non c'è! Forse non riesce a crearla :/ Ho provato a creare una directory come hai detto tu e me la crea......ma che caspita è a sto punto?

[414N]

Io controllerei i permessi della tua home con un bel ls -la.