Codice: Seleziona tutto
bash-4.1# dhcpcd eth1
dhcpcd[2309]: version 5.2.11 starting
dhcpcd[2309]: eth1: waiting for carrier
dhcpcd[2309]: timed out
dhcpcd[2309]: allowing 8 seconds for IPv4LL timeout
dhcpcd[2309]: timed out
Moderatore: Staff
Codice: Seleziona tutto
bash-4.1# dhcpcd eth1
dhcpcd[2309]: version 5.2.11 starting
dhcpcd[2309]: eth1: waiting for carrier
dhcpcd[2309]: timed out
dhcpcd[2309]: allowing 8 seconds for IPv4LL timeout
dhcpcd[2309]: timed out
Codice: Seleziona tutto
modprobe -r 8139too
dmesg -c
modprobe 8139too
Codice: Seleziona tutto
dmesg
Codice: Seleziona tutto
bash-4.1# modprobe -r 8139too
bash-4.1# dmesg -c
71] vgaarb: loaded
[ 0.222618] SCSI subsystem initialized
[ 0.222868] libata version 3.00 loaded.
[ 0.223042] usbcore: registered new interface driver usbfs
[ 0.223218] usbcore: registered new interface driver hub
[ 0.223356] usbcore: registered new device driver usb
[ 0.223691] PCI: Using ACPI for IRQ routing
[ 0.223782] PCI: pci_cache_line_size set to 32 bytes
[ 0.223849] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.223854] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[ 0.224256] Switching to clocksource tsc
[ 0.231504] pnp: PnP ACPI init
[ 0.231635] ACPI: bus type pnp registered
[ 0.231970] pnp 00:00: [bus 00-ff]
[ 0.231977] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.231981] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.231985] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.231990] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.231993] pnp 00:00: [mem 0x000cb000-0x000dffff window]
[ 0.231997] pnp 00:00: [mem 0x40000000-0xffdfffff window]
[ 0.232001] pnp 00:00: [mem 0xfee01000-0xffdfffff window]
[ 0.232261] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.232364] pnp 00:01: [io 0x0010-0x001f]
[ 0.232369] pnp 00:01: [io 0x0022-0x003f]
[ 0.232372] pnp 00:01: [io 0x0044-0x005f]
[ 0.232375] pnp 00:01: [io 0x0062-0x0063]
[ 0.232378] pnp 00:01: [io 0x0065-0x006f]
[ 0.232381] pnp 00:01: [io 0x0072-0x007f]
[ 0.232384] pnp 00:01: [io 0x0080]
[ 0.232387] pnp 00:01: [io 0x0084-0x0086]
[ 0.232390] pnp 00:01: [io 0x0088]
[ 0.232393] pnp 00:01: [io 0x008c-0x008e]
[ 0.232396] pnp 00:01: [io 0x0090-0x009f]
[ 0.232399] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.232403] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.232406] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.232409] pnp 00:01: [io 0x0295-0x0296]
[ 0.232412] pnp 00:01: [io 0x0800-0x087f]
[ 0.232415] pnp 00:01: [io 0x0880-0x08ff]
[ 0.232418] pnp 00:01: [io 0x0c00-0x0c1f]
[ 0.232422] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.232568] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232596] pnp 00:02: [dma 4]
[ 0.232600] pnp 00:02: [io 0x0000-0x000f]
[ 0.232603] pnp 00:02: [io 0x0081-0x0083]
[ 0.232606] pnp 00:02: [io 0x0087]
[ 0.232610] pnp 00:02: [io 0x0089-0x008b]
[ 0.232613] pnp 00:02: [io 0x008f]
[ 0.232616] pnp 00:02: [io 0x00c0-0x00df]
[ 0.232619] pnp 00:02: [io 0x0481-0x0483]
[ 0.232622] pnp 00:02: [io 0x0487]
[ 0.232625] pnp 00:02: [io 0x0489-0x048b]
[ 0.232628] pnp 00:02: [io 0x048f]
[ 0.232739] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.232760] pnp 00:03: [io 0x0070-0x0071]
[ 0.232784] pnp 00:03: [irq 8]
[ 0.232872] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.232890] pnp 00:04: [io 0x0061]
[ 0.232970] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.232988] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.232996] pnp 00:05: [irq 13]
[ 0.233075] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.233146] pnp 00:06: [io 0x0060]
[ 0.233149] pnp 00:06: [io 0x0064]
[ 0.233156] pnp 00:06: [irq 1]
[ 0.233247] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.233395] pnp 00:07: [io 0x03f2-0x03f3]
[ 0.233399] pnp 00:07: [io 0x03f4-0x03f5]
[ 0.233402] pnp 00:07: [io 0x03f7]
[ 0.233409] pnp 00:07: [irq 6]
[ 0.233412] pnp 00:07: [dma 2]
[ 0.233538] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.233966] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.233974] pnp 00:08: [irq 4]
[ 0.234106] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.234812] pnp 00:09: [io 0x0378-0x037f]
[ 0.234817] pnp 00:09: [io 0x0778-0x077b]
[ 0.234824] pnp 00:09: [irq 7]
[ 0.234827] pnp 00:09: [dma 0]
[ 0.235005] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.235338] pnp 00:0a: [io 0x0200-0x0207]
[ 0.235430] pnp 00:0a: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.235753] pnp: PnP ACPI: found 11 devices
[ 0.235816] ACPI: ACPI bus type pnp unregistered
[ 0.235896] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.235956] system 00:01: [io 0x0295-0x0296] has been reserved
[ 0.236015] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.236074] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.236132] system 00:01: [io 0x0c00-0x0c1f] has been reserved
[ 0.236194] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.277531] pci 0000:00:09.0: address space collision: [mem 0xffff0000-0xffffffff pref] conflicts with reserved [mem 0xfffc0000-0xffffffff]
[ 0.277665] pci 0000:00:09.0: BAR 6: assigned [mem 0x40000000-0x4000ffff pref]
[ 0.277767] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.278383] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.278448] pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xcfefffff]
[ 0.278511] pci 0000:00:01.0: bridge window [mem 0x8fa00000-0xcfbfffff pref]
[ 0.278611] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.278615] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.278620] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.278624] pci_bus 0000:01: resource 1 [mem 0xcfd00000-0xcfefffff]
[ 0.278628] pci_bus 0000:01: resource 2 [mem 0x8fa00000-0xcfbfffff pref]
[ 0.278716] NET: Registered protocol family 2
[ 0.278851] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.279411] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.282018] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.283353] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.283417] TCP reno registered
[ 0.283478] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.283576] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.283864] NET: Registered protocol family 1
[ 0.284131] RPC: Registered udp transport module.
[ 0.284188] RPC: Registered tcp transport module.
[ 0.284244] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.284401] pci 0000:01:00.0: Boot video device
[ 0.284409] PCI: CLS 32 bytes, default 32
[ 0.285946] audit: initializing netlink socket (disabled)
[ 0.286034] type=2000 audit(1318461008.284:1): initialized
[ 0.286334] highmem bounce pool size: 64 pages
[ 0.291933] VFS: Disk quotas dquot_6.5.2
[ 0.292118] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.292805] DLM (built Apr 9 2011 23:32:52) installed
[ 0.294851] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.295374] NTFS driver 2.1.29 [Flags: R/W].
[ 0.295657] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.296130] JFS: nTxBlock = 7960, nTxLock = 63684
[ 0.304297] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.305373] SGI XFS Quota Management subsystem
[ 0.305441] OCFS2 1.5.0
[ 0.305813] ocfs2: Registered cluster interface o2cb
[ 0.306032] ocfs2: Registered cluster interface user
[ 0.306091] OCFS2 DLMFS 1.5.0
[ 0.306281] OCFS2 User DLM kernel interface loaded
[ 0.306339] OCFS2 Node Manager 1.5.0
[ 0.306746] OCFS2 DLM 1.5.0
[ 0.307355] Btrfs loaded
[ 0.308419] GFS2 (built Apr 9 2011 23:33:12) installed
[ 0.308505] msgmni has been set to 1718
[ 0.310097] async_tx: api initialized (async)
[ 0.310338] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.310462] io scheduler noop registered
[ 0.310518] io scheduler deadline registered
[ 0.310609] io scheduler cfq registered (default)
[ 0.311174] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.311780] ERST: Table is not found!
[ 0.311859] isapnp: Scanning for PnP cards...
[ 0.668058] isapnp: No Plug & Play device found
[ 0.674407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.938763] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.960287] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.961075] Floppy drive(s): fd0 is 1.44M
[ 0.976364] FDC 0 is a post-1991 82077
[ 0.981217] brd: module loaded
[ 0.983170] loop: module loaded
[ 0.983234] Compaq SMART2 Driver (v 2.6.0)
[ 0.983443] HP CISS Driver (v 3.6.26)
[ 0.985038] Loading iSCSI transport class v2.0-870.
[ 0.986000] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[ 0.989011] Adaptec aacraid driver 1.1-5[26400]-ms
[ 0.989335] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 0.989860] scsi: <fdomain> Detection failed (no card)
[ 0.989929] sym53c416.c: Version 1.0.0-ac
[ 0.990006] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[ 0.990175] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[ 0.990462] iscsi: registered transport (qla4xxx)
[ 0.990581] QLogic iSCSI HBA Driver
[ 0.990677] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[ 0.990735] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 0.990873] Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.0
[ 1.012622] Failed initialization of WD-7000 SCSI card!
[ 1.056471] DC390: clustering now enabled by default. If you get problems load
[ 1.056553] with "disable_clustering=1" and report to maintainers
[ 1.056757] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 1.057020] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 1.057141] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[ 1.057272] mpt2sas version 06.100.00.00 loaded
[ 1.057566] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 1.057815] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 1.057942] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 1.058087] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 1.058231] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[ 1.058377] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[ 1.058495] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 1.058850] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[ 1.062527] pata_sis 0000:00:02.5: version 0.5.2
[ 1.063830] scsi2 : pata_sis
[ 1.064214] scsi3 : pata_sis
[ 1.065351] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.065415] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.066563] I2O subsystem v1.325
[ 1.066642] i2o: max drivers = 8
[ 1.066928] I2O Configuration OSM v1.323
[ 1.067040] I2O Bus Adapter OSM v1.317
[ 1.067149] I2O Block Device OSM v1.325
[ 1.067507] I2O SCSI Peripheral OSM v1.316
[ 1.067694] I2O ProcFS OSM v1.316
[ 1.067828] Fusion MPT base driver 3.04.17
[ 1.067884] Copyright (c) 1999-2008 LSI Corporation
[ 1.067946] Fusion MPT SPI Host driver 3.04.17
[ 1.068092] Fusion MPT FC Host driver 3.04.17
[ 1.068228] Fusion MPT SAS Host driver 3.04.17
[ 1.068362] Fusion MPT misc device (ioctl) driver 3.04.17
[ 1.068607] mptctl: Registered with Fusion MPT base driver
[ 1.068718] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 1.068777] Fusion MPT LAN driver 3.04.17
[ 1.069049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.069187] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.069282] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 1.069496] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[ 1.069731] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcffff000
[ 1.075619] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[ 1.075738] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.075799] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.075881] usb usb1: Product: EHCI Host Controller
[ 1.075938] usb usb1: Manufacturer: Linux 2.6.37.6-smp ehci_hcd
[ 1.075995] usb usb1: SerialNumber: 0000:00:03.2
[ 1.076351] hub 1-0:1.0: USB hub found
[ 1.076416] hub 1-0:1.0: 6 ports detected
[ 1.076808] 116x: driver isp116x-hcd, 03 Nov 2005
[ 1.076921] driver isp1362-hcd, 2005-04-04
[ 1.077033] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.077179] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.077273] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 1.077510] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.077679] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfffd000
[ 1.116724] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.116786] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.116868] usb usb2: Product: OHCI Host Controller
[ 1.116925] usb usb2: Manufacturer: Linux 2.6.37.6-smp ohci_hcd
[ 1.116983] usb usb2: SerialNumber: 0000:00:03.0
[ 1.117335] hub 2-0:1.0: USB hub found
[ 1.117401] hub 2-0:1.0: 3 ports detected
[ 1.117673] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.117763] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 1.117949] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.118090] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffe000
[ 1.140372] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 1.140434] ata1.00: 160086528 sectors, multi 16: LBA
[ 1.146341] ata1.00: configured for UDMA/133
[ 1.146689] scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 1.147321] sd 2:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.147490] sd 2:0:0:0: [sda] Write Protect is off
[ 1.147549] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.147588] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.164932] sda: sda1 sda2 sda3 sda4
[ 1.165903] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.171067] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.171128] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.171210] usb usb3: Product: OHCI Host Controller
[ 1.171267] usb usb3: Manufacturer: Linux 2.6.37.6-smp ohci_hcd
[ 1.171325] usb usb3: SerialNumber: 0000:00:03.1
[ 1.171739] hub 3-0:1.0: USB hub found
[ 1.171805] hub 3-0:1.0: 3 ports detected
[ 1.172149] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.172512] sl811: driver sl811-hcd, 19 May 2005
[ 1.172630] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[ 1.172939] Initializing USB Mass Storage driver...
[ 1.173127] usbcore: registered new interface driver usb-storage
[ 1.173186] USB Mass Storage support registered.
[ 1.173298] usbcore: registered new interface driver ums-alauda
[ 1.173416] usbcore: registered new interface driver ums-cypress
[ 1.173534] usbcore: registered new interface driver ums-datafab
[ 1.173653] usbcore: registered new interface driver ums-freecom
[ 1.173772] usbcore: registered new interface driver ums-isd200
[ 1.174474] usbcore: registered new interface driver ums-jumpshot
[ 1.174599] usbcore: registered new interface driver ums-karma
[ 1.174714] usbcore: registered new interface driver ums-onetouch
[ 1.174828] usbcore: registered new interface driver ums-sddr09
[ 1.174944] usbcore: registered new interface driver ums-sddr55
[ 1.175082] usbcore: registered new interface driver ums-usbat
[ 1.175296] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.175356] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.175683] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.176217] mice: PS/2 mouse device common for all mice
[ 1.176357] md: linear personality registered for level -1
[ 1.176416] md: raid0 personality registered for level 0
[ 1.176473] md: raid1 personality registered for level 1
[ 1.176557] md: raid10 personality registered for level 10
[ 1.176614] md: raid6 personality registered for level 6
[ 1.176670] md: raid5 personality registered for level 5
[ 1.176727] md: raid4 personality registered for level 4
[ 1.176784] md: multipath personality registered for level -4
[ 1.177168] device-mapper: uevent: version 1.0.3
[ 1.177537] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 1.177736] cpuidle: using governor ladder
[ 1.177792] cpuidle: using governor menu
[ 1.177968] input: Speakup as /devices/virtual/input/input0
[ 1.178133] speakup 3.1.6: initialized
[ 1.178202] synth name on entry is: (null)
[ 1.178379] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 1.178612] TCP cubic registered
[ 1.178670] Initializing XFRM netlink socket
[ 1.178766] NET: Registered protocol family 17
[ 1.178869] Registering the dns_resolver key type
[ 1.178973] Using IPI No-Shortcut mode
[ 1.196066] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.302291] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.03, max UDMA/66
[ 1.302361] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 1.308270] ata2.00: configured for UDMA/33
[ 1.310866] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.03 PQ: 0 ANSI: 5
[ 1.312940] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.313042] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.313406] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.313712] registered taskstats version 1
[ 1.314163] md: Waiting for all devices to be available before autodetect
[ 1.314226] md: If you don't use raid, use raid=noautodetect
[ 1.314703] md: Autodetecting RAID arrays.
[ 1.314763] md: Scanned 0 and added 0 devices.
[ 1.314820] md: autorun ...
[ 1.314874] md: ... autorun DONE.
[ 1.331446] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[ 1.331880] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[ 1.355557] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.355738] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 1.380702] devtmpfs: mounted
[ 1.380804] Freeing unused kernel memory: 612k freed
[ 1.382114] Write protecting the kernel text: 10108k
[ 1.382259] Write protecting the kernel read-only data: 2540k
[ 1.528044] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 1.719042] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[ 1.719120] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.719184] usb 3-2: Product: USB OPTICAL MOUSE
[ 1.719242] usb 3-2: Manufacturer: PIXART
[ 2.628151] udev[1126]: starting version 165
[ 3.052371] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 3.052622] ACPI: Power Button [PWRB]
[ 3.055239] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.055475] ACPI: Power Button [PWRF]
[ 3.071687] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 3.071918] 8139too 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.094287] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0xd400, c8:3a:35:dd:fb:f9, IRQ 17
[ 3.174554] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.174695] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.240197] Linux agpgart interface v0.103
[ 3.398362] parport_pc 00:09: reported by Plug and Play ACPI
[ 3.398537] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 3.432004] gameport gameport0: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x200, speed 890kHz
[ 3.433988] agpgart-sis 0000:00:00.0: SiS chipset [1039/0746]
[ 3.475064] ACPI: acpi_idle registered with cpuidle
[ 3.550583] udev[1141]: renamed network interface eth0 to eth1
[ 3.552705] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[ 3.552865] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.641354] ppdev: user-space parallel port driver
[ 3.663287] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/input/input4
[ 3.663810] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:03.1-2/input0
[ 3.664527] usbcore: registered new interface driver usbhid
[ 3.664597] usbhid: USB HID core driver
[ 3.670178] rtc_cmos 00:03: RTC can wake from S4
[ 3.671650] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.671762] rtc0: alarms up to one year, 114 bytes nvram
[ 3.719390] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 3.719474] ACPI: resource 0000:00:02.1 [io 0x0c00-0x0c1f] conflicts with ACPI region SMRG [??? 0x00000c00-0x00000c1f flags 0x47]
[ 3.719566] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.789765] [drm] Initialized drm 1.1.0 20060810
[ 4.094236] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.114183] [drm] radeon defaulting to kernel modesetting.
[ 4.114262] [drm] radeon kernel modesetting enabled.
[ 4.114522] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.120856] [drm] initializing kernel modesetting (RV350 0x1002:0x4150).
[ 4.121126] [drm] register mmio base: 0xCFEF0000
[ 4.121184] [drm] register mmio size: 65536
[ 4.121602] agpgart-sis 0000:00:00.0: AGP 3.0 bridge
[ 4.121685] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 4.121773] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
[ 4.132041] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 4.132138] radeon 0000:01:00.0: GTT: 64M 0xD0000000 - 0xD3FFFFFF
[ 4.132201] [drm] Generation 2 PCI interface, using max accessible memory
[ 4.132266] radeon 0000:01:00.0: VRAM: 256M 0x00000000B0000000 - 0x00000000BFFFFFFF (256M used)
[ 4.132444] [drm] radeon: irq initialized.
[ 4.132651] [drm] Detected VRAM RAM=256M, BAR=256M
[ 4.132729] [drm] RAM width 128bits DDR
[ 4.132968] [TTM] Zone kernel: Available graphics memory: 440174 kiB.
[ 4.133073] [TTM] Zone highmem: Available graphics memory: 509778 kiB.
[ 4.133135] [TTM] Initializing pool allocator.
[ 4.133237] [drm] radeon: 256M of VRAM memory ready
[ 4.133299] [drm] radeon: 64M of GTT memory ready.
[ 4.133416] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 4.134786] radeon 0000:01:00.0: WB disabled
[ 4.136176] [drm] Loading R300 Microcode
[ 4.285770] [drm] radeon: ring at 0x00000000D0001000
[ 4.285867] [drm] ring test succeeded in 1 usecs
[ 4.286335] [drm] radeon: ib pool ready.
[ 4.286524] [drm] ib test succeeded in 0 usecs
[ 4.289596] [drm] Radeon Display Connectors
[ 4.289671] [drm] Connector 0:
[ 4.289726] [drm] VGA
[ 4.289781] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 4.289841] [drm] Encoders:
[ 4.289896] [drm] CRT1: INTERNAL_DAC1
[ 4.289952] [drm] Connector 1:
[ 4.290044] [drm] DVI-I
[ 4.290100] [drm] HPD1
[ 4.290155] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 4.290214] [drm] Encoders:
[ 4.290268] [drm] CRT2: INTERNAL_DAC2
[ 4.290324] [drm] DFP1: INTERNAL_TMDS1
[ 4.290380] [drm] Connector 2:
[ 4.290434] [drm] S-video
[ 4.290487] [drm] Encoders:
[ 4.290541] [drm] TV1: INTERNAL_DAC2
[ 4.410028] intel8x0_measure_ac97_clock: measured 50658 usecs (2437 samples)
[ 4.410109] intel8x0: clocking to 48000
[ 4.489149] [drm] fb mappable at 0xB0040000
[ 4.489223] [drm] vram apper at 0xB0000000
[ 4.489280] [drm] size 4177920
[ 4.489335] [drm] fb depth is 24
[ 4.489389] [drm] pitch is 5440
[ 4.561825] Console: switching to colour frame buffer device 170x48
[ 4.581185] fb0: radeondrmfb frame buffer device
[ 4.581313] drm: registered panic notifier
[ 4.581501] [drm] Initialized radeon 2.7.0 20080528 for 0000:01:00.0 on minor 0
[ 6.449923] Adding 2097148k swap on /dev/sda1. Priority:-1 extents:1 across:2097148k
[ 6.530989] fuse init (API version 7.15)
[ 6.737079] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 6.793481] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 7.369824] lp0: using parport0 (interrupt-driven).
[ 7.369991] lp0: console ready
[ 10.728451] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 10.759808] REISERFS (device sda4): found reiserfs format "3.6" with standard journal
[ 10.765328] REISERFS (device sda4): using ordered data mode
[ 10.774214] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 10.788452] REISERFS (device sda4): checking transaction log (sda4)
[ 10.801902] REISERFS (device sda4): Using r5 hash to sort names
[ 15.394882] NET: Registered protocol family 10
[ 15.396114] lo: Disabled Privacy Extensions
[ 102.543517] eth1: link down
[ 102.543999] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 219.396025] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 219.515020] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 219.515025] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 219.515030] usb 1-1: Product: STORE N GO
[ 219.515034] usb 1-1: Manufacturer: Verbatim
[ 219.515037] usb 1-1: SerialNumber: 07A5090992C969B6
[ 219.519763] scsi4 : usb-storage 1-1:1.0
[ 220.555840] scsi 4:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 0 CCS
[ 220.556310] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 223.678648] sd 4:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 223.681058] sd 4:0:0:0: [sdb] Write Protect is off
[ 223.681066] sd 4:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 223.681070] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 223.688393] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 223.712486] sdb: sdb1
[ 223.718104] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 223.718115] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 248.077749] start_kdeinit (1901): /proc/1901/oom_adj is deprecated, please use /proc/1901/oom_score_adj instead.
[ 256.516493] ata1.00: configured for UDMA/133
[ 256.516511] ata1: EH complete
[ 257.076868] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 257.213347] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 440.115473] usb 1-1: USB disconnect, address 3
[ 1449.674027] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 1449.793043] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 1449.793048] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1449.793053] usb 1-1: Product: STORE N GO
[ 1449.793056] usb 1-1: Manufacturer: Verbatim
[ 1449.793059] usb 1-1: SerialNumber: 07A5090992C969B6
[ 1449.797789] scsi5 : usb-storage 1-1:1.0
[ 1450.833866] scsi 5:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 0 CCS
[ 1450.834331] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1454.239048] sd 5:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 1454.241421] sd 5:0:0:0: [sdb] Write Protect is off
[ 1454.241429] sd 5:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 1454.241434] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1454.249285] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1454.273493] sdb: sdb1
[ 1454.279239] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1454.279250] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 1675.733954] usb 1-1: USB disconnect, address 4
[ 1739.587023] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 1739.706111] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 1739.706118] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1739.706124] usb 1-1: Product: STORE N GO
[ 1739.706127] usb 1-1: Manufacturer: Verbatim
[ 1739.706130] usb 1-1: SerialNumber: 07A5090992C969B6
[ 1739.710870] scsi6 : usb-storage 1-1:1.0
[ 1740.746672] scsi 6:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 0 CCS
[ 1740.747137] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 1743.568240] sd 6:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 1743.570613] sd 6:0:0:0: [sdb] Write Protect is off
[ 1743.570621] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 1743.570626] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1743.578728] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1743.602678] sdb: sdb1
[ 1743.608282] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1743.608293] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 1779.557729] usb 1-1: USB disconnect, address 5
[ 2146.430025] usb 1-1: new high speed USB device using ehci_hcd and address 6
[ 2146.548993] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 2146.548999] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2146.549012] usb 1-1: Product: STORE N GO
[ 2146.549016] usb 1-1: Manufacturer: Verbatim
[ 2146.549019] usb 1-1: SerialNumber: 07A5090992C969B6
[ 2146.553720] scsi7 : usb-storage 1-1:1.0
[ 2147.589319] scsi 7:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 0 CCS
[ 2147.589775] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 2150.779372] sd 7:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 2150.781748] sd 7:0:0:0: [sdb] Write Protect is off
[ 2150.781756] sd 7:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 2150.781761] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2150.789859] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2150.813811] sdb: sdb1
[ 2150.820078] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2150.820090] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 2322.194613] usb 1-1: USB disconnect, address 6
[ 4417.622025] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 4417.741014] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 4417.741023] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4417.741028] usb 1-1: Product: STORE N GO
[ 4417.741031] usb 1-1: Manufacturer: Verbatim
[ 4417.741034] usb 1-1: SerialNumber: 07A5090992C969B6
[ 4417.745769] scsi8 : usb-storage 1-1:1.0
[ 4418.781424] scsi 8:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 0 CCS
[ 4418.781874] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 4422.209257] sd 8:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 4422.211633] sd 8:0:0:0: [sdb] Write Protect is off
[ 4422.211641] sd 8:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 4422.211646] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4422.219744] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4422.243989] sdb: sdb1
[ 4422.250453] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4422.250465] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 4604.179817] usb 1-1: USB disconnect, address 7
[ 5227.926069] 8139too 0000:00:09.0: PCI INT A disabled
Codice: Seleziona tutto
bash-4.1# modprobe 8139too
bash-4.1# dmesg -c
[ 5383.794440] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5383.954090] ISO 9660 Extensions: RRIP_1991A
[ 5453.128031] usb 1-1: new high speed USB device using ehci_hcd and address 8
[ 5453.247052] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 5453.247057] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5453.247063] usb 1-1: Product: STORE N GO
[ 5453.247066] usb 1-1: Manufacturer: Verbatim
[ 5453.247069] usb 1-1: SerialNumber: 07A5090992C969B6
[ 5453.251740] scsi9 : usb-storage 1-1:1.0
[ 5454.287720] scsi 9:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 0 CCS
[ 5454.288198] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 5457.650117] sd 9:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 5457.652692] sd 9:0:0:0: [sdb] Write Protect is off
[ 5457.652702] sd 9:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 5457.652707] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 5457.661339] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 5457.685613] sdb: sdb1
[ 5457.691601] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 5457.691615] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 5574.561141] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 5574.561311] 8139too 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5574.563913] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0xd400, c8:3a:35:dd:fb:f9, IRQ 17
[ 5574.580649] udev[2497]: renamed network interface eth0 to eth1
Codice: Seleziona tutto
/etc/udev/rules.d/70-persistent-net.rules
Codice: Seleziona tutto
/etc/udev/rules.d/70-persistent-net.rules
Codice: Seleziona tutto
bash-4.1# cat 70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x10ec:0x8139 (8139too)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="c8:3a:35:dd:fb:f9", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
# PCI device 0x1039:0x0900 (sis900)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0b:6a:53:fc:c1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
Codice: Seleziona tutto
# PCI device 0x10ec:0x8139 (8139too)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="c8:3a:35:dd:fb:f9", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
malik ha scritto: proverò a risolvere il rename della sheda seguendo questo wiki https://wiki.archlinux.org/index.php/Udev_(Italiano)
Codice: Seleziona tutto
persistent-net-generator.rules
che poi è il mio caso, lo dimostra il file:/lib/udev/write_net_rules
Codice: Seleziona tutto
bash-4.1# cat 70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x10ec:0x8139 (8139too)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="c8:3a:35:dd:fb:f9", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
# PCI device 0x1039:0x0900 (sis900)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0b:6a:53:fc:c1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"