Repository 32bit  Forum
Repository 64bit  Wiki

[Risolto]sheda di rete ethernet: eth0 link is down

Usate questo forum per richieste di aiuto e consigli sull'hardware montato nelle vostre macchine con GNU/Linux Slackware.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata e la versione del Kernel. Questi dati aiutano le persone che possono rispondere.
2) Citare il tipo di hardware coinvolto in modo dettagliato.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT. Non usare termini gergali come procio, mobo e simili per identificare i componenti hardware.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda malik » lun ott 08, 2012 23:32

Codice: Seleziona tutto
bash-4.1# dhcpcd eth1
dhcpcd[2309]: version 5.2.11 starting
dhcpcd[2309]: eth1: waiting for carrier
dhcpcd[2309]: timed out
dhcpcd[2309]: allowing 8 seconds for IPv4LL timeout
dhcpcd[2309]: timed out
Avatar utente
malik
Linux 1.0
Linux 1.0
 
Messaggi: 46
Iscritto il: mer nov 09, 2011 23:02
Nome Cognome: francesco
Slackware: 13.37
Kernel: 2.6.37.6-smp
Desktop: kde

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda targzeta » lun ott 08, 2012 23:38

Ok, ora posso ufficialmente dire che anche io non so cosa ci sia che non va (ma, da buon programmatore, mi riservo il fatto che è molto tardi: non si dica mai che mi arrendo) :lol: .

Non è che davvero hai due schede di rete e tu hai attaccato il cavo a quella sbagliata, no? Perché non capisco come mai udev rinomini la scheda da eth0 a eth1 (anche se, anche questo non vuol dire nulla).

Altra prova che puoi fare è questa:
Codice: Seleziona tutto
modprobe -r 8139too
dmesg -c
modprobe 8139too
e poi postare l'output intero di:
Codice: Seleziona tutto
dmesg
così abbiamo un quadro completo della situazione.

Emanuele
Linux Registered User #454438
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
20/04/2013 - Io volevo Rodotà
Avatar utente
targzeta
Iper Master
Iper Master
 
Messaggi: 6156
Iscritto il: gio nov 03, 2005 14:05
Località: Carpignano Sal. (LE) <-> Pisa
Nome Cognome: Emanuele Tomasi
Slackware: current
Kernel: latest stable
Desktop: IceWM

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda malik » mar ott 09, 2012 0:06

è vero è tardi ma ancora non tanto per confondere due shede di cui una integrata e l'altra PCI :D ,
anche io mi chiedo perchè UDEV rinomini questa scheda?????? :-k

ho fatto la prova che mi hai indicato , questi i risultati, sono un po lunghi.
Ti ringrazio per esserti preso a cuore il mio problema :)

questo il dmesg con il modulo scaricato:
Codice: Seleziona tutto
 
bash-4.1# modprobe -r 8139too
bash-4.1# dmesg -c
71] vgaarb: loaded
[    0.222618] SCSI subsystem initialized
[    0.222868] libata version 3.00 loaded.
[    0.223042] usbcore: registered new interface driver usbfs
[    0.223218] usbcore: registered new interface driver hub
[    0.223356] usbcore: registered new device driver usb
[    0.223691] PCI: Using ACPI for IRQ routing
[    0.223782] PCI: pci_cache_line_size set to 32 bytes
[    0.223849] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.223854] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[    0.224256] Switching to clocksource tsc
[    0.231504] pnp: PnP ACPI init
[    0.231635] ACPI: bus type pnp registered
[    0.231970] pnp 00:00: [bus 00-ff]
[    0.231977] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.231981] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.231985] pnp 00:00: [io  0x0d00-0xffff window]
[    0.231990] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.231993] pnp 00:00: [mem 0x000cb000-0x000dffff window]
[    0.231997] pnp 00:00: [mem 0x40000000-0xffdfffff window]
[    0.232001] pnp 00:00: [mem 0xfee01000-0xffdfffff window]
[    0.232261] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.232364] pnp 00:01: [io  0x0010-0x001f]
[    0.232369] pnp 00:01: [io  0x0022-0x003f]
[    0.232372] pnp 00:01: [io  0x0044-0x005f]
[    0.232375] pnp 00:01: [io  0x0062-0x0063]
[    0.232378] pnp 00:01: [io  0x0065-0x006f]
[    0.232381] pnp 00:01: [io  0x0072-0x007f]
[    0.232384] pnp 00:01: [io  0x0080]
[    0.232387] pnp 00:01: [io  0x0084-0x0086]
[    0.232390] pnp 00:01: [io  0x0088]
[    0.232393] pnp 00:01: [io  0x008c-0x008e]
[    0.232396] pnp 00:01: [io  0x0090-0x009f]
[    0.232399] pnp 00:01: [io  0x00a2-0x00bf]
[    0.232403] pnp 00:01: [io  0x00e0-0x00ef]
[    0.232406] pnp 00:01: [io  0x04d0-0x04d1]
[    0.232409] pnp 00:01: [io  0x0295-0x0296]
[    0.232412] pnp 00:01: [io  0x0800-0x087f]
[    0.232415] pnp 00:01: [io  0x0880-0x08ff]
[    0.232418] pnp 00:01: [io  0x0c00-0x0c1f]
[    0.232422] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.232568] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.232596] pnp 00:02: [dma 4]
[    0.232600] pnp 00:02: [io  0x0000-0x000f]
[    0.232603] pnp 00:02: [io  0x0081-0x0083]
[    0.232606] pnp 00:02: [io  0x0087]
[    0.232610] pnp 00:02: [io  0x0089-0x008b]
[    0.232613] pnp 00:02: [io  0x008f]
[    0.232616] pnp 00:02: [io  0x00c0-0x00df]
[    0.232619] pnp 00:02: [io  0x0481-0x0483]
[    0.232622] pnp 00:02: [io  0x0487]
[    0.232625] pnp 00:02: [io  0x0489-0x048b]
[    0.232628] pnp 00:02: [io  0x048f]
[    0.232739] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.232760] pnp 00:03: [io  0x0070-0x0071]
[    0.232784] pnp 00:03: [irq 8]
[    0.232872] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.232890] pnp 00:04: [io  0x0061]
[    0.232970] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.232988] pnp 00:05: [io  0x00f0-0x00ff]
[    0.232996] pnp 00:05: [irq 13]
[    0.233075] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.233146] pnp 00:06: [io  0x0060]
[    0.233149] pnp 00:06: [io  0x0064]
[    0.233156] pnp 00:06: [irq 1]
[    0.233247] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.233395] pnp 00:07: [io  0x03f2-0x03f3]
[    0.233399] pnp 00:07: [io  0x03f4-0x03f5]
[    0.233402] pnp 00:07: [io  0x03f7]
[    0.233409] pnp 00:07: [irq 6]
[    0.233412] pnp 00:07: [dma 2]
[    0.233538] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.233966] pnp 00:08: [io  0x03f8-0x03ff]
[    0.233974] pnp 00:08: [irq 4]
[    0.234106] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.234812] pnp 00:09: [io  0x0378-0x037f]
[    0.234817] pnp 00:09: [io  0x0778-0x077b]
[    0.234824] pnp 00:09: [irq 7]
[    0.234827] pnp 00:09: [dma 0]
[    0.235005] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.235338] pnp 00:0a: [io  0x0200-0x0207]
[    0.235430] pnp 00:0a: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.235753] pnp: PnP ACPI: found 11 devices
[    0.235816] ACPI: ACPI bus type pnp unregistered
[    0.235896] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.235956] system 00:01: [io  0x0295-0x0296] has been reserved
[    0.236015] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.236074] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.236132] system 00:01: [io  0x0c00-0x0c1f] has been reserved
[    0.236194] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.277531] pci 0000:00:09.0: address space collision: [mem 0xffff0000-0xffffffff pref] conflicts with reserved [mem 0xfffc0000-0xffffffff]
[    0.277665] pci 0000:00:09.0: BAR 6: assigned [mem 0x40000000-0x4000ffff pref]
[    0.277767] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[    0.278383] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.278448] pci 0000:00:01.0:   bridge window [mem 0xcfd00000-0xcfefffff]
[    0.278511] pci 0000:00:01.0:   bridge window [mem 0x8fa00000-0xcfbfffff pref]
[    0.278611] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.278615] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.278620] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.278624] pci_bus 0000:01: resource 1 [mem 0xcfd00000-0xcfefffff]
[    0.278628] pci_bus 0000:01: resource 2 [mem 0x8fa00000-0xcfbfffff pref]
[    0.278716] NET: Registered protocol family 2
[    0.278851] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.279411] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.282018] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.283353] TCP: Hash tables configured (established 131072 bind 65536)
[    0.283417] TCP reno registered
[    0.283478] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.283576] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.283864] NET: Registered protocol family 1
[    0.284131] RPC: Registered udp transport module.
[    0.284188] RPC: Registered tcp transport module.
[    0.284244] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.284401] pci 0000:01:00.0: Boot video device
[    0.284409] PCI: CLS 32 bytes, default 32
[    0.285946] audit: initializing netlink socket (disabled)
[    0.286034] type=2000 audit(1318461008.284:1): initialized
[    0.286334] highmem bounce pool size: 64 pages
[    0.291933] VFS: Disk quotas dquot_6.5.2
[    0.292118] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.292805] DLM (built Apr  9 2011 23:32:52) installed
[    0.294851] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.295374] NTFS driver 2.1.29 [Flags: R/W].
[    0.295657] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.296130] JFS: nTxBlock = 7960, nTxLock = 63684
[    0.304297] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.305373] SGI XFS Quota Management subsystem
[    0.305441] OCFS2 1.5.0
[    0.305813] ocfs2: Registered cluster interface o2cb
[    0.306032] ocfs2: Registered cluster interface user
[    0.306091] OCFS2 DLMFS 1.5.0
[    0.306281] OCFS2 User DLM kernel interface loaded
[    0.306339] OCFS2 Node Manager 1.5.0
[    0.306746] OCFS2 DLM 1.5.0
[    0.307355] Btrfs loaded
[    0.308419] GFS2 (built Apr  9 2011 23:33:12) installed
[    0.308505] msgmni has been set to 1718
[    0.310097] async_tx: api initialized (async)
[    0.310338] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.310462] io scheduler noop registered
[    0.310518] io scheduler deadline registered
[    0.310609] io scheduler cfq registered (default)
[    0.311174] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.311780] ERST: Table is not found!
[    0.311859] isapnp: Scanning for PnP cards...
[    0.668058] isapnp: No Plug & Play device found
[    0.674407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.938763] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.960287] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.961075] Floppy drive(s): fd0 is 1.44M
[    0.976364] FDC 0 is a post-1991 82077
[    0.981217] brd: module loaded
[    0.983170] loop: module loaded
[    0.983234] Compaq SMART2 Driver (v 2.6.0)
[    0.983443] HP CISS Driver (v 3.6.26)
[    0.985038] Loading iSCSI transport class v2.0-870.
[    0.986000] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[    0.989011] Adaptec aacraid driver 1.1-5[26400]-ms
[    0.989335] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    0.989860] scsi: <fdomain> Detection failed (no card)
[    0.989929] sym53c416.c: Version 1.0.0-ac
[    0.990006] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[    0.990175] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[    0.990462] iscsi: registered transport (qla4xxx)
[    0.990581] QLogic iSCSI HBA Driver
[    0.990677] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[    0.990735] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    0.990873] Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.0
[    1.012622] Failed initialization of WD-7000 SCSI card!
[    1.056471] DC390: clustering now enabled by default. If you get problems load
[    1.056553]        with "disable_clustering=1" and report to maintainers
[    1.056757] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    1.057020] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    1.057141] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[    1.057272] mpt2sas version 06.100.00.00 loaded
[    1.057566] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    1.057815] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    1.057942] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    1.058087] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    1.058231] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[    1.058377] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    1.058495] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    1.058850] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[    1.062527] pata_sis 0000:00:02.5: version 0.5.2
[    1.063830] scsi2 : pata_sis
[    1.064214] scsi3 : pata_sis
[    1.065351] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.065415] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.066563] I2O subsystem v1.325
[    1.066642] i2o: max drivers = 8
[    1.066928] I2O Configuration OSM v1.323
[    1.067040] I2O Bus Adapter OSM v1.317
[    1.067149] I2O Block Device OSM v1.325
[    1.067507] I2O SCSI Peripheral OSM v1.316
[    1.067694] I2O ProcFS OSM v1.316
[    1.067828] Fusion MPT base driver 3.04.17
[    1.067884] Copyright (c) 1999-2008 LSI Corporation
[    1.067946] Fusion MPT SPI Host driver 3.04.17
[    1.068092] Fusion MPT FC Host driver 3.04.17
[    1.068228] Fusion MPT SAS Host driver 3.04.17
[    1.068362] Fusion MPT misc device (ioctl) driver 3.04.17
[    1.068607] mptctl: Registered with Fusion MPT base driver
[    1.068718] mptctl: /dev/mptctl @ (major,minor=10,220)
[    1.068777] Fusion MPT LAN driver 3.04.17
[    1.069049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.069187] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.069282] ehci_hcd 0000:00:03.2: EHCI Host Controller
[    1.069496] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[    1.069731] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcffff000
[    1.075619] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[    1.075738] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.075799] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.075881] usb usb1: Product: EHCI Host Controller
[    1.075938] usb usb1: Manufacturer: Linux 2.6.37.6-smp ehci_hcd
[    1.075995] usb usb1: SerialNumber: 0000:00:03.2
[    1.076351] hub 1-0:1.0: USB hub found
[    1.076416] hub 1-0:1.0: 6 ports detected
[    1.076808] 116x: driver isp116x-hcd, 03 Nov 2005
[    1.076921] driver isp1362-hcd, 2005-04-04
[    1.077033] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.077179] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.077273] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    1.077510] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    1.077679] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfffd000
[    1.116724] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.116786] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.116868] usb usb2: Product: OHCI Host Controller
[    1.116925] usb usb2: Manufacturer: Linux 2.6.37.6-smp ohci_hcd
[    1.116983] usb usb2: SerialNumber: 0000:00:03.0
[    1.117335] hub 2-0:1.0: USB hub found
[    1.117401] hub 2-0:1.0: 3 ports detected
[    1.117673] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.117763] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    1.117949] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    1.118090] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffe000
[    1.140372] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[    1.140434] ata1.00: 160086528 sectors, multi 16: LBA
[    1.146341] ata1.00: configured for UDMA/133
[    1.146689] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
[    1.147321] sd 2:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[    1.147490] sd 2:0:0:0: [sda] Write Protect is off
[    1.147549] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.147588] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.164932]  sda: sda1 sda2 sda3 sda4
[    1.165903] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.171067] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.171128] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.171210] usb usb3: Product: OHCI Host Controller
[    1.171267] usb usb3: Manufacturer: Linux 2.6.37.6-smp ohci_hcd
[    1.171325] usb usb3: SerialNumber: 0000:00:03.1
[    1.171739] hub 3-0:1.0: USB hub found
[    1.171805] hub 3-0:1.0: 3 ports detected
[    1.172149] uhci_hcd: USB Universal Host Controller Interface driver
[    1.172512] sl811: driver sl811-hcd, 19 May 2005
[    1.172630] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[    1.172939] Initializing USB Mass Storage driver...
[    1.173127] usbcore: registered new interface driver usb-storage
[    1.173186] USB Mass Storage support registered.
[    1.173298] usbcore: registered new interface driver ums-alauda
[    1.173416] usbcore: registered new interface driver ums-cypress
[    1.173534] usbcore: registered new interface driver ums-datafab
[    1.173653] usbcore: registered new interface driver ums-freecom
[    1.173772] usbcore: registered new interface driver ums-isd200
[    1.174474] usbcore: registered new interface driver ums-jumpshot
[    1.174599] usbcore: registered new interface driver ums-karma
[    1.174714] usbcore: registered new interface driver ums-onetouch
[    1.174828] usbcore: registered new interface driver ums-sddr09
[    1.174944] usbcore: registered new interface driver ums-sddr55
[    1.175082] usbcore: registered new interface driver ums-usbat
[    1.175296] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.175356] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.175683] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.176217] mice: PS/2 mouse device common for all mice
[    1.176357] md: linear personality registered for level -1
[    1.176416] md: raid0 personality registered for level 0
[    1.176473] md: raid1 personality registered for level 1
[    1.176557] md: raid10 personality registered for level 10
[    1.176614] md: raid6 personality registered for level 6
[    1.176670] md: raid5 personality registered for level 5
[    1.176727] md: raid4 personality registered for level 4
[    1.176784] md: multipath personality registered for level -4
[    1.177168] device-mapper: uevent: version 1.0.3
[    1.177537] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[    1.177736] cpuidle: using governor ladder
[    1.177792] cpuidle: using governor menu
[    1.177968] input: Speakup as /devices/virtual/input/input0
[    1.178133] speakup 3.1.6: initialized
[    1.178202] synth name on entry is: (null)
[    1.178379] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    1.178612] TCP cubic registered
[    1.178670] Initializing XFRM netlink socket
[    1.178766] NET: Registered protocol family 17
[    1.178869] Registering the dns_resolver key type
[    1.178973] Using IPI No-Shortcut mode
[    1.196066] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    1.302291] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.03, max UDMA/66
[    1.302361] ata2.00: limited to UDMA/33 due to 40-wire cable
[    1.308270] ata2.00: configured for UDMA/33
[    1.310866] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.03 PQ: 0 ANSI: 5
[    1.312940] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.313042] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.313406] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.313712] registered taskstats version 1
[    1.314163] md: Waiting for all devices to be available before autodetect
[    1.314226] md: If you don't use raid, use raid=noautodetect
[    1.314703] md: Autodetecting RAID arrays.
[    1.314763] md: Scanned 0 and added 0 devices.
[    1.314820] md: autorun ...
[    1.314874] md: ... autorun DONE.
[    1.331446] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[    1.331880] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[    1.355557] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.355738] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    1.380702] devtmpfs: mounted
[    1.380804] Freeing unused kernel memory: 612k freed
[    1.382114] Write protecting the kernel text: 10108k
[    1.382259] Write protecting the kernel read-only data: 2540k
[    1.528044] usb 3-2: new low speed USB device using ohci_hcd and address 2
[    1.719042] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[    1.719120] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.719184] usb 3-2: Product: USB OPTICAL MOUSE
[    1.719242] usb 3-2: Manufacturer: PIXART
[    2.628151] udev[1126]: starting version 165
[    3.052371] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    3.052622] ACPI: Power Button [PWRB]
[    3.055239] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.055475] ACPI: Power Button [PWRF]
[    3.071687] 8139too: 8139too Fast Ethernet driver 0.9.28
[    3.071918] 8139too 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.094287] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0xd400, c8:3a:35:dd:fb:f9, IRQ 17
[    3.174554] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    3.174695] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    3.240197] Linux agpgart interface v0.103
[    3.398362] parport_pc 00:09: reported by Plug and Play ACPI
[    3.398537] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[    3.432004] gameport gameport0: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x200, speed 890kHz
[    3.433988] agpgart-sis 0000:00:00.0: SiS chipset [1039/0746]
[    3.475064] ACPI: acpi_idle registered with cpuidle
[    3.550583] udev[1141]: renamed network interface eth0 to eth1
[    3.552705] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[    3.552865] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.641354] ppdev: user-space parallel port driver
[    3.663287] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/input/input4
[    3.663810] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:03.1-2/input0
[    3.664527] usbcore: registered new interface driver usbhid
[    3.664597] usbhid: USB HID core driver
[    3.670178] rtc_cmos 00:03: RTC can wake from S4
[    3.671650] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.671762] rtc0: alarms up to one year, 114 bytes nvram
[    3.719390] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[    3.719474] ACPI: resource 0000:00:02.1 [io  0x0c00-0x0c1f] conflicts with ACPI region SMRG [??? 0x00000c00-0x00000c1f flags 0x47]
[    3.719566] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.789765] [drm] Initialized drm 1.1.0 20060810
[    4.094236] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.114183] [drm] radeon defaulting to kernel modesetting.
[    4.114262] [drm] radeon kernel modesetting enabled.
[    4.114522] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.120856] [drm] initializing kernel modesetting (RV350 0x1002:0x4150).
[    4.121126] [drm] register mmio base: 0xCFEF0000
[    4.121184] [drm] register mmio size: 65536
[    4.121602] agpgart-sis 0000:00:00.0: AGP 3.0 bridge
[    4.121685] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
[    4.121773] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
[    4.132041] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
[    4.132138] radeon 0000:01:00.0: GTT: 64M 0xD0000000 - 0xD3FFFFFF
[    4.132201] [drm] Generation 2 PCI interface, using max accessible memory
[    4.132266] radeon 0000:01:00.0: VRAM: 256M 0x00000000B0000000 - 0x00000000BFFFFFFF (256M used)
[    4.132444] [drm] radeon: irq initialized.
[    4.132651] [drm] Detected VRAM RAM=256M, BAR=256M
[    4.132729] [drm] RAM width 128bits DDR
[    4.132968] [TTM] Zone  kernel: Available graphics memory: 440174 kiB.
[    4.133073] [TTM] Zone highmem: Available graphics memory: 509778 kiB.
[    4.133135] [TTM] Initializing pool allocator.
[    4.133237] [drm] radeon: 256M of VRAM memory ready
[    4.133299] [drm] radeon: 64M of GTT memory ready.
[    4.133416] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[    4.134786] radeon 0000:01:00.0: WB disabled
[    4.136176] [drm] Loading R300 Microcode
[    4.285770] [drm] radeon: ring at 0x00000000D0001000
[    4.285867] [drm] ring test succeeded in 1 usecs
[    4.286335] [drm] radeon: ib pool ready.
[    4.286524] [drm] ib test succeeded in 0 usecs
[    4.289596] [drm] Radeon Display Connectors
[    4.289671] [drm] Connector 0:
[    4.289726] [drm]   VGA
[    4.289781] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    4.289841] [drm]   Encoders:
[    4.289896] [drm]     CRT1: INTERNAL_DAC1
[    4.289952] [drm] Connector 1:
[    4.290044] [drm]   DVI-I
[    4.290100] [drm]   HPD1
[    4.290155] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    4.290214] [drm]   Encoders:
[    4.290268] [drm]     CRT2: INTERNAL_DAC2
[    4.290324] [drm]     DFP1: INTERNAL_TMDS1
[    4.290380] [drm] Connector 2:
[    4.290434] [drm]   S-video
[    4.290487] [drm]   Encoders:
[    4.290541] [drm]     TV1: INTERNAL_DAC2
[    4.410028] intel8x0_measure_ac97_clock: measured 50658 usecs (2437 samples)
[    4.410109] intel8x0: clocking to 48000
[    4.489149] [drm] fb mappable at 0xB0040000
[    4.489223] [drm] vram apper at 0xB0000000
[    4.489280] [drm] size 4177920
[    4.489335] [drm] fb depth is 24
[    4.489389] [drm]    pitch is 5440
[    4.561825] Console: switching to colour frame buffer device 170x48
[    4.581185] fb0: radeondrmfb frame buffer device
[    4.581313] drm: registered panic notifier
[    4.581501] [drm] Initialized radeon 2.7.0 20080528 for 0000:01:00.0 on minor 0
[    6.449923] Adding 2097148k swap on /dev/sda1.  Priority:-1 extents:1 across:2097148k
[    6.530989] fuse init (API version 7.15)
[    6.737079] EXT4-fs (sda2): re-mounted. Opts: (null)
[    6.793481] EXT4-fs (sda2): re-mounted. Opts: (null)
[    7.369824] lp0: using parport0 (interrupt-driven).
[    7.369991] lp0: console ready
[   10.728451] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   10.759808] REISERFS (device sda4): found reiserfs format "3.6" with standard journal
[   10.765328] REISERFS (device sda4): using ordered data mode
[   10.774214] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   10.788452] REISERFS (device sda4): checking transaction log (sda4)
[   10.801902] REISERFS (device sda4): Using r5 hash to sort names
[   15.394882] NET: Registered protocol family 10
[   15.396114] lo: Disabled Privacy Extensions
[  102.543517] eth1: link down
[  102.543999] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  219.396025] usb 1-1: new high speed USB device using ehci_hcd and address 3
[  219.515020] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[  219.515025] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  219.515030] usb 1-1: Product: STORE N GO
[  219.515034] usb 1-1: Manufacturer: Verbatim
[  219.515037] usb 1-1: SerialNumber: 07A5090992C969B6
[  219.519763] scsi4 : usb-storage 1-1:1.0
[  220.555840] scsi 4:0:0:0: Direct-Access     Verbatim STORE N GO       PMAP PQ: 0 ANSI: 0 CCS
[  220.556310] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  223.678648] sd 4:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[  223.681058] sd 4:0:0:0: [sdb] Write Protect is off
[  223.681066] sd 4:0:0:0: [sdb] Mode Sense: 03 41 00 00
[  223.681070] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  223.688393] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  223.712486]  sdb: sdb1
[  223.718104] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  223.718115] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[  248.077749] start_kdeinit (1901): /proc/1901/oom_adj is deprecated, please use /proc/1901/oom_score_adj instead.
[  256.516493] ata1.00: configured for UDMA/133
[  256.516511] ata1: EH complete
[  257.076868] EXT4-fs (sda2): re-mounted. Opts: commit=0
[  257.213347] EXT4-fs (sda3): re-mounted. Opts: commit=0
[  440.115473] usb 1-1: USB disconnect, address 3
[ 1449.674027] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 1449.793043] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 1449.793048] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1449.793053] usb 1-1: Product: STORE N GO
[ 1449.793056] usb 1-1: Manufacturer: Verbatim
[ 1449.793059] usb 1-1: SerialNumber: 07A5090992C969B6
[ 1449.797789] scsi5 : usb-storage 1-1:1.0
[ 1450.833866] scsi 5:0:0:0: Direct-Access     Verbatim STORE N GO       PMAP PQ: 0 ANSI: 0 CCS
[ 1450.834331] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1454.239048] sd 5:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 1454.241421] sd 5:0:0:0: [sdb] Write Protect is off
[ 1454.241429] sd 5:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 1454.241434] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1454.249285] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1454.273493]  sdb: sdb1
[ 1454.279239] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1454.279250] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 1675.733954] usb 1-1: USB disconnect, address 4
[ 1739.587023] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 1739.706111] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 1739.706118] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1739.706124] usb 1-1: Product: STORE N GO
[ 1739.706127] usb 1-1: Manufacturer: Verbatim
[ 1739.706130] usb 1-1: SerialNumber: 07A5090992C969B6
[ 1739.710870] scsi6 : usb-storage 1-1:1.0
[ 1740.746672] scsi 6:0:0:0: Direct-Access     Verbatim STORE N GO       PMAP PQ: 0 ANSI: 0 CCS
[ 1740.747137] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 1743.568240] sd 6:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 1743.570613] sd 6:0:0:0: [sdb] Write Protect is off
[ 1743.570621] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 1743.570626] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1743.578728] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1743.602678]  sdb: sdb1
[ 1743.608282] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1743.608293] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 1779.557729] usb 1-1: USB disconnect, address 5
[ 2146.430025] usb 1-1: new high speed USB device using ehci_hcd and address 6
[ 2146.548993] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 2146.548999] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2146.549012] usb 1-1: Product: STORE N GO
[ 2146.549016] usb 1-1: Manufacturer: Verbatim
[ 2146.549019] usb 1-1: SerialNumber: 07A5090992C969B6
[ 2146.553720] scsi7 : usb-storage 1-1:1.0
[ 2147.589319] scsi 7:0:0:0: Direct-Access     Verbatim STORE N GO       PMAP PQ: 0 ANSI: 0 CCS
[ 2147.589775] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 2150.779372] sd 7:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 2150.781748] sd 7:0:0:0: [sdb] Write Protect is off
[ 2150.781756] sd 7:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 2150.781761] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2150.789859] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2150.813811]  sdb: sdb1
[ 2150.820078] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2150.820090] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 2322.194613] usb 1-1: USB disconnect, address 6
[ 4417.622025] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 4417.741014] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 4417.741023] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4417.741028] usb 1-1: Product: STORE N GO
[ 4417.741031] usb 1-1: Manufacturer: Verbatim
[ 4417.741034] usb 1-1: SerialNumber: 07A5090992C969B6
[ 4417.745769] scsi8 : usb-storage 1-1:1.0
[ 4418.781424] scsi 8:0:0:0: Direct-Access     Verbatim STORE N GO       PMAP PQ: 0 ANSI: 0 CCS
[ 4418.781874] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 4422.209257] sd 8:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 4422.211633] sd 8:0:0:0: [sdb] Write Protect is off
[ 4422.211641] sd 8:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 4422.211646] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4422.219744] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4422.243989]  sdb: sdb1
[ 4422.250453] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 4422.250465] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 4604.179817] usb 1-1: USB disconnect, address 7
[ 5227.926069] 8139too 0000:00:09.0: PCI INT A disabled


questo il dmesg dopo aver ricaricato il modulo:
Codice: Seleziona tutto
bash-4.1# modprobe 8139too
bash-4.1# dmesg -c
[ 5383.794440] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5383.954090] ISO 9660 Extensions: RRIP_1991A
[ 5453.128031] usb 1-1: new high speed USB device using ehci_hcd and address 8
[ 5453.247052] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
[ 5453.247057] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5453.247063] usb 1-1: Product: STORE N GO
[ 5453.247066] usb 1-1: Manufacturer: Verbatim
[ 5453.247069] usb 1-1: SerialNumber: 07A5090992C969B6
[ 5453.251740] scsi9 : usb-storage 1-1:1.0
[ 5454.287720] scsi 9:0:0:0: Direct-Access     Verbatim STORE N GO       PMAP PQ: 0 ANSI: 0 CCS
[ 5454.288198] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 5457.650117] sd 9:0:0:0: [sdb] 7833600 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 5457.652692] sd 9:0:0:0: [sdb] Write Protect is off
[ 5457.652702] sd 9:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 5457.652707] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 5457.661339] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 5457.685613]  sdb: sdb1
[ 5457.691601] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 5457.691615] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 5574.561141] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 5574.561311] 8139too 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5574.563913] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0xd400, c8:3a:35:dd:fb:f9, IRQ 17
[ 5574.580649] udev[2497]: renamed network interface eth0 to eth1


ciao
Avatar utente
malik
Linux 1.0
Linux 1.0
 
Messaggi: 46
Iscritto il: mer nov 09, 2011 23:02
Nome Cognome: francesco
Slackware: 13.37
Kernel: 2.6.37.6-smp
Desktop: kde

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda targzeta » mar ott 09, 2012 0:17

Ma quindi hai davvero due schede di rete? No, perché se è così devi provare subito a spostare il cavo.

Dopo aver eliminato l'impossibile, ciò che resta, per improbabile che sia, deve essere la verità (cit.).

Emanuele
Linux Registered User #454438
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
20/04/2013 - Io volevo Rodotà
Avatar utente
targzeta
Iper Master
Iper Master
 
Messaggi: 6156
Iscritto il: gio nov 03, 2005 14:05
Località: Carpignano Sal. (LE) <-> Pisa
Nome Cognome: Emanuele Tomasi
Slackware: current
Kernel: latest stable
Desktop: IceWM

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda malik » mar ott 09, 2012 0:28

Si ho due shede di rete , ma ripeto la prima quella integrata nella sheda madre, è disabilitata dalla BIOS.
Ad ogni modo questa prova è stata già fatta , il risultato è che entrambe le schede sono riconosciute ,
ma non hanno un link, ho disabilitato la prima scheda per ridurre il problema.
Se vuoi posso abilitare la scheda e possiamo provare insieme le varie opzioni.
Posso anche smontare la sheda PCI(nuova di negozio) e lasciare solo la scheda integrata.
Non so ,io credo che lavorando su una scheda alla volta il problema si riduca.
Tu che dici?
Avatar utente
malik
Linux 1.0
Linux 1.0
 
Messaggi: 46
Iscritto il: mer nov 09, 2011 23:02
Nome Cognome: francesco
Slackware: 13.37
Kernel: 2.6.37.6-smp
Desktop: kde

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda targzeta » mar ott 09, 2012 0:46

Come mai hai acquistato una nuova scheda di rete? "Solo" perché l'altra non ti andava?

Comunque, ora vado a nanna, il sonno porta buoni consigli. Domani, magari, qualcuno ci illuminerà :)

Emanuele

P.S. Comunque, non serviva disabilitarne una via BIOS. Può essere che udev si sia fatto una regola perché si "è accorto" che hai due schede. Controlla se hai il file
Codice: Seleziona tutto
/etc/udev/rules.d/70-persistent-net.rules
E' lì che vengono scritte queste impostazioni.
Linux Registered User #454438
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
20/04/2013 - Io volevo Rodotà
Avatar utente
targzeta
Iper Master
Iper Master
 
Messaggi: 6156
Iscritto il: gio nov 03, 2005 14:05
Località: Carpignano Sal. (LE) <-> Pisa
Nome Cognome: Emanuele Tomasi
Slackware: current
Kernel: latest stable
Desktop: IceWM

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda malik » mar ott 09, 2012 1:16

questo pc era stato buttato nella spazzatura, ho comprato una scheda di rete "solo" perchè trovandomi nella situazione che ti ho
presentato pensavo fosse un problema dell'hardware(niente di più facile ,tu che dici ;) ).

il file
Codice: Seleziona tutto
/etc/udev/rules.d/70-persistent-net.rules


contiene le due regole per le schede di rete, ma sembrano corrette , comunque è questo:
Codice: Seleziona tutto
 
bash-4.1# cat 70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x10ec:0x8139 (8139too)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="c8:3a:35:dd:fb:f9", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

# PCI device 0x1039:0x0900 (sis900)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0b:6a:53:fc:c1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"


ho provato anche a cancellarlo per far si che venisse riscritto , ma niente cambiamenti, anche io penso che sia un
problema di UDEV ma non so come funziona.

buonanotte
Avatar utente
malik
Linux 1.0
Linux 1.0
 
Messaggi: 46
Iscritto il: mer nov 09, 2011 23:02
Nome Cognome: francesco
Slackware: 13.37
Kernel: 2.6.37.6-smp
Desktop: kde

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda targzeta » mar ott 09, 2012 17:19

Se non altro, abbiamo capito come mai udev ti rinomina l'interfaccia:
Codice: Seleziona tutto
# PCI device 0x10ec:0x8139 (8139too)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="c8:3a:35:dd:fb:f9", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
la regola "NAME=eth1" fa proprio questo.

Ma quindi fammi capire, il problema potrebbe anche essere hardware?

Emanuele
Linux Registered User #454438
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
20/04/2013 - Io volevo Rodotà
Avatar utente
targzeta
Iper Master
Iper Master
 
Messaggi: 6156
Iscritto il: gio nov 03, 2005 14:05
Località: Carpignano Sal. (LE) <-> Pisa
Nome Cognome: Emanuele Tomasi
Slackware: current
Kernel: latest stable
Desktop: IceWM

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda malik » mar ott 09, 2012 17:33

Non lo so , resta il fatto che la sheda PCI è nuova di negozio, mentre non conosco le sorti di quella integrata.
Ho comprato questa perchè dopo tante prove ho pensato ad un problema hardware.
Sono a lavoro, stasera avrò più tempo

e proverò a risolvere il rename della sheda seguendo questo wiki https://wiki.archlinux.org/index.php/Udev_(Italiano)

pensi che possa servire? :?
Avatar utente
malik
Linux 1.0
Linux 1.0
 
Messaggi: 46
Iscritto il: mer nov 09, 2011 23:02
Nome Cognome: francesco
Slackware: 13.37
Kernel: 2.6.37.6-smp
Desktop: kde

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda malik » mar ott 09, 2012 20:56

Buonasera a tutti

malik ha scritto: proverò a risolvere il rename della sheda seguendo questo wiki https://wiki.archlinux.org/index.php/Udev_(Italiano)



leggendo bene il wiki che ho linkato, il problema del rename viene risolto da versioni recenti di UDEV attraverso lo sript:

Codice: Seleziona tutto
persistent-net-generator.rules


della libreria :

/lib/udev/write_net_rules


che poi è il mio caso, lo dimostra il file:

Codice: Seleziona tutto
     
    bash-4.1# cat 70-persistent-net.rules
    # This file was automatically generated by the /lib/udev/write_net_rules
    # program, run by the persistent-net-generator.rules rules file.
    #
    # You can modify it, as long as you keep each rule on a single
    # line, and change only the value of the NAME= key.

    # PCI device 0x10ec:0x8139 (8139too)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="c8:3a:35:dd:fb:f9", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

    # PCI device 0x1039:0x0900 (sis900)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0b:6a:53:fc:c1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"


a questo punto non so cosa pensare , :?: :?: :?: :?: :?: tranne che mi abbiano venduto una scheda rotta :doubt: , ma rimane il fatto che la scheda viene riconosciuta dal sitema e posta fra i dispositivi da UDEV .
Qualcuno ha lo stesso problema ????

Qualcuno sa forse se il driver 8139too ha bisogno di un firmware come diceva Emanuele?
Avatar utente
malik
Linux 1.0
Linux 1.0
 
Messaggi: 46
Iscritto il: mer nov 09, 2011 23:02
Nome Cognome: francesco
Slackware: 13.37
Kernel: 2.6.37.6-smp
Desktop: kde

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda targzeta » mar ott 09, 2012 21:22

Ma il rename a che ti serve? Di certo non è quello il problema. Basta che metti 'NAME=eth0' alla prima scheda e 'NAME=eth1' alla seconda.

Il tuo problema è un altro. Però anche l'output del driver dopo modprobe sembra ok. Non riesco proprio a capire. Scheda recente su PC vecchio? Boh, è troppo strano che non ti funzionino entrambe le schede. Una passi, ma due :doubt:

Emanuele
Linux Registered User #454438
Se pensi di essere troppo piccolo per fare la differenza, prova a dormire con una zanzara -- Dalai Lama
20/04/2013 - Io volevo Rodotà
Avatar utente
targzeta
Iper Master
Iper Master
 
Messaggi: 6156
Iscritto il: gio nov 03, 2005 14:05
Località: Carpignano Sal. (LE) <-> Pisa
Nome Cognome: Emanuele Tomasi
Slackware: current
Kernel: latest stable
Desktop: IceWM

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda malik » mar ott 09, 2012 21:33

Non lo so !!!!
a questo punto l'unica cosa che rimane è accertarsi che il driver sia quello giusto.
Anche a me suona strano che una scheda di rete, venga vista dal sistema, ma sia rotta(caso di quella integrata).
Ma mi suona ancora più strano che una scheda appena comprata e che si comporta come la prima sia rotta anch'essa.

faccio un po di ricerche riguardo al driver , e vi faccio sapere.

a dopo
Avatar utente
malik
Linux 1.0
Linux 1.0
 
Messaggi: 46
Iscritto il: mer nov 09, 2011 23:02
Nome Cognome: francesco
Slackware: 13.37
Kernel: 2.6.37.6-smp
Desktop: kde

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda malik » gio ott 11, 2012 18:46

Ciao ho fatto un po di ricerche , ho trovato qualcuno che consiglia di mettere il driver 8139 built-in invece che come modulo nel kernel.
Pensate che ricompilare il kernel possa aiutare?...
Non ho mai ricompilato il kernel per questo chiedo un vostro consiglio
grazie
Avatar utente
malik
Linux 1.0
Linux 1.0
 
Messaggi: 46
Iscritto il: mer nov 09, 2011 23:02
Nome Cognome: francesco
Slackware: 13.37
Kernel: 2.6.37.6-smp
Desktop: kde

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda erio » gio ott 11, 2012 19:20

prova con un comando in console usato nelle live: pppoe-setup,e vedi cosa salta fuori,
erio
Linux 3.x
Linux 3.x
 
Messaggi: 1069
Iscritto il: ven ott 09, 2009 18:25
Slackware: 13.37
Kernel: 3.0.7
Desktop: kde

Re: sheda di rete ethernet: eth0 link is down, ethtool :link

Messaggioda malik » ven ott 12, 2012 8:18

Perche pppoe???
Avatar utente
malik
Linux 1.0
Linux 1.0
 
Messaggi: 46
Iscritto il: mer nov 09, 2011 23:02
Nome Cognome: francesco
Slackware: 13.37
Kernel: 2.6.37.6-smp
Desktop: kde

PrecedenteProssimo

Torna a Hardware

Chi c’è in linea

Visitano il forum: Nessuno e 1 ospite

cron