Repository 32bit  Forum
Repository 64bit  Wiki

ati con x600se

Scrivete su questo forum se avete problemi o volete dare buoni consigli sui computer portatili (Laptop).

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Citare il modello preciso del laptop in questione.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

ati con x600se

Messaggioda dragonix » dom set 25, 2005 18:22

Ho installato gli ultimi driver ati e fglrxinfo mi da il seguente risultato:

Xlib: extension "XFree86-DRI" missing on display ":0.0".
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: http://www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)

Successivamente ho dato il comando fglrxconfig ottenendo il seguente xorg:
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "it"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 50.0
VertRefresh 40 - 90
Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "(null)"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # no device found at config time
Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"

Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###




A questo punto non si avvia più kde. Avete qualche suggerimento per risolvere il problema?
dragonix
Linux 2.0
Linux 2.0
 
Messaggi: 141
Iscritto il: dom gen 25, 2004 0:00
Località: Lecce

Messaggioda rob » dom set 25, 2005 22:36

Ho installato gli ultimi driver ati e fglrxinfo mi da il seguente risultato:

Xlib: extension "XFree86-DRI" missing on display ":0.0".
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: http://www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)

non stai usando gli fglrx. assicurati che il modulo sia caricato.

ciao, rob
Avatar utente
rob
Linux 2.6
Linux 2.6
 
Messaggi: 924
Iscritto il: lun nov 22, 2004 0:00
Località: Roma

Messaggioda Raistlin84 » lun set 26, 2005 10:37

Scusate ma sapete come faccio ad abilitare l'accelerazione video per una X300...
Perchè io ho installato i driver, modificato il file xorg.conf.E ovviamente viene lanciato fglrx.
Ma niente,non ci posso guardsare nemmeno i film...mi vanno a scatti.
Eppure sul pc di casa [ATI9600] mi funziona...infatti sul sito della ATI c'è scritto che per le schede dei portatili non ci sono driver linux che le supportano....avete qualche idea?
Avatar utente
Raistlin84
Linux 2.6
Linux 2.6
 
Messaggi: 542
Iscritto il: dom mar 27, 2005 23:00
Località: Pistoia

Messaggioda gallows » lun set 26, 2005 10:47

Raistlin84 ha scritto:Scusate ma sapete come faccio ad abilitare l'accelerazione video per una X300...
Perchè io ho installato i driver, modificato il file xorg.conf.E ovviamente viene lanciato fglrx.
Ma niente,non ci posso guardsare nemmeno i film...mi vanno a scatti.
Eppure sul pc di casa [ATI9600] mi funziona...infatti sul sito della ATI c'è scritto che per le schede dei portatili non ci sono driver linux che le supportano....avete qualche idea?

Dove l'hai letta 'sta cosa? A me la x300 va. E per quanto ne so non è l'unica mobility supportata.
Detto questo: hai inserito la famosa stringa nel fstab?
Avatar utente
gallows
Staff
Staff
 
Messaggi: 3466
Iscritto il: dom set 19, 2004 23:00
Località: Palermo
Kernel: FreeBSD 8.0-RELEASE-p3
Desktop: ratpoison

Messaggioda dragonix » lun set 26, 2005 11:01

fglrx è presente. Dopo aver modificato xorg con fglrxconfig non si avvia più kde dando il seguente messaggio:

(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.16.20
(II) ATI Proprietary Linux Driver Release Identifier: @@UNRELEASED_AND_UNSUPPORTED_DRIVER@@
(II) ATI Proprietary Linux Driver Build Date: Aug 16 2005 00:15:14
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.16.1-driver-lnx-206829
(--) Assigning device section with no busID to primary device
(EE) No devices detected.

Fatal server error:
no screens found
dragonix
Linux 2.0
Linux 2.0
 
Messaggi: 141
Iscritto il: dom gen 25, 2004 0:00
Località: Lecce

Messaggioda dragonix » lun set 26, 2005 11:03

Ho la sensazione che la mia sheda non sia supportata... non è una x600 ma una x600se
Può essere questo il problema?
(Kernel 2.6.13.2, lsmod mi da i seguenti risultati:
snd_pcm_oss 52896 0
snd_mixer_oss 19520 1 snd_pcm_oss
fglrx 260072 0
agpgart 35976 1 fglrx)
dragonix
Linux 2.0
Linux 2.0
 
Messaggi: 141
Iscritto il: dom gen 25, 2004 0:00
Località: Lecce

Messaggioda dragonix » lun set 26, 2005 15:29

Nessuno può aiutarmi?
dragonix
Linux 2.0
Linux 2.0
 
Messaggi: 141
Iscritto il: dom gen 25, 2004 0:00
Località: Lecce

Messaggioda dragonix » dom ott 02, 2005 11:58

Vi allego il file di log di xorg (kde non si avvia):


X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.4.31 i686 [ELF]
Current Operating System: Linux darknet 2.6.13.2 #10 Sat Oct 1 19:43:43 UTC 2005 i686
Build Date: 25 September 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 1 20:55:45 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1179,ff10 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1179,ff10 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1179,ff10 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1179,ff10 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1179,ff10 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1179,ff10 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1179,ff10 rev 04 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 1179,0001 rev 04 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1179,ff10 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2653 card 1179,ff10 rev 04 class 01,01,80 hdr 00
(II) PCI: 01:00:0: chip 1002,5462 card 1179,ff10 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 11ab,4351 card 1179,ff10 rev 10 class 02,00,00 hdr 00
(II) PCI: 06:04:0: chip 8086,4220 card 8086,2741 rev 05 class 02,80,00 hdr 00
(II) PCI: 06:06:0: chip 104c,8031 card 6000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:06:2: chip 104c,8032 card 1179,ff10 rev 00 class 0c,00,10 hdr 80
(II) PCI: 06:06:3: chip 104c,8033 card 1179,ff10 rev 00 class 01,80,00 hdr 80
(II) PCI: 06:06:4: chip 104c,8034 card 1179,ff10 rev 00 class 08,05,00 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000dfff (0x2000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x90000000 - 0x9fffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000bfff (0x2000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xbc000000 - 0xbfffffff (0x4000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x8c000000 - 0x8fffffff (0x4000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00008000 - 0x00009fff (0x2000) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xb8000000 - 0xbbffffff (0x4000000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x88000000 - 0x8bffffff (0x4000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,10), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[B]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[B]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[B]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[B]
[4] -1 0 0x00007000 - 0x000070ff (0x100) IX[B]
[5] -1 0 0x00007400 - 0x000074ff (0x100) IX[B]
[6] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[7] -1 0 0x00007c00 - 0x00007cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:6:0), (6,7,10), BCTRL: 0x03c0 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[B]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[B]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[B]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[B]
[4] -1 0 0x00007000 - 0x000070ff (0x100) IX[B]
[5] -1 0 0x00007400 - 0x000074ff (0x100) IX[B]
[6] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[7] -1 0 0x00007c00 - 0x00007cff (0x100) IX[B]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x80000000 - 0x81ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5462) rev 0, Mem @ 0x90000000/27, 0xc0000000/16, I/O @ 0xc000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xb000a200 - 0xb000a2ff (0x100) MX[B]
[1] -1 0 0xb000a100 - 0xb000a1ff (0x100) MX[B]
[2] -1 0 0xb000a000 - 0xb000a0ff (0x100) MX[B]
[3] -1 0 0xb0008000 - 0xb0009fff (0x2000) MX[B]
[4] -1 0 0xb0004000 - 0xb0007fff (0x4000) MX[B]
[5] -1 0 0xb0000000 - 0xb00007ff (0x800) MX[B]
[6] -1 0 0xb000b000 - 0xb000bfff (0x1000) MX[B]
[7] -1 0 0xbc000000 - 0xbc003fff (0x4000) MX[B]
[8] -1 0 0xd0000200 - 0xd00002ff (0x100) MX[B]
[9] -1 0 0xd0000000 - 0xd00001ff (0x200) MX[B]
[10] -1 0 0xf4000000 - 0xf40003ff (0x400) MX[B]
[11] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[B](B)
[12] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[14] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[15] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[B]
[16] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[17] -1 0 0x0000e100 - 0x0000e13f (0x40) IX[B]
[18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[19] -1 0 0x00001260 - 0x0000127f (0x20) IX[B]
[20] -1 0 0x00001240 - 0x0000125f (0x20) IX[B]
[21] -1 0 0x00001220 - 0x0000123f (0x20) IX[B]
[22] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[23] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xb000a200 - 0xb000a2ff (0x100) MX[B]
[1] -1 0 0xb000a100 - 0xb000a1ff (0x100) MX[B]
[2] -1 0 0xb000a000 - 0xb000a0ff (0x100) MX[B]
[3] -1 0 0xb0008000 - 0xb0009fff (0x2000) MX[B]
[4] -1 0 0xb0004000 - 0xb0007fff (0x4000) MX[B]
[5] -1 0 0xb0000000 - 0xb00007ff (0x800) MX[B]
[6] -1 0 0xb000b000 - 0xb000bfff (0x1000) MX[B]
[7] -1 0 0xbc000000 - 0xbc003fff (0x4000) MX[B]
[8] -1 0 0xd0000200 - 0xd00002ff (0x100) MX[B]
[9] -1 0 0xd0000000 - 0xd00001ff (0x200) MX[B]
[10] -1 0 0xf4000000 - 0xf40003ff (0x400) MX[B]
[11] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[B](B)
[12] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[13] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[14] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[15] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[B]
[16] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[17] -1 0 0x0000e100 - 0x0000e13f (0x40) IX[B]
[18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[19] -1 0 0x00001260 - 0x0000127f (0x20) IX[B]
[20] -1 0 0x00001240 - 0x0000125f (0x20) IX[B]
[21] -1 0 0x00001220 - 0x0000123f (0x20) IX[B]
[22] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[23] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xb000a200 - 0xb000a2ff (0x100) MX[B]
[6] -1 0 0xb000a100 - 0xb000a1ff (0x100) MX[B]
[7] -1 0 0xb000a000 - 0xb000a0ff (0x100) MX[B]
[8] -1 0 0xb0008000 - 0xb0009fff (0x2000) MX[B]
[9] -1 0 0xb0004000 - 0xb0007fff (0x4000) MX[B]
[10] -1 0 0xb0000000 - 0xb00007ff (0x800) MX[B]
[11] -1 0 0xb000b000 - 0xb000bfff (0x1000) MX[B]
[12] -1 0 0xbc000000 - 0xbc003fff (0x4000) MX[B]
[13] -1 0 0xd0000200 - 0xd00002ff (0x100) MX[B]
[14] -1 0 0xd0000000 - 0xd00001ff (0x200) MX[B]
[15] -1 0 0xf4000000 - 0xf40003ff (0x400) MX[B]
[16] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[B](B)
[17] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[21] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[22] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[B]
[23] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[24] -1 0 0x0000e100 - 0x0000e13f (0x40) IX[B]
[25] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[26] -1 0 0x00001260 - 0x0000127f (0x20) IX[B]
[27] -1 0 0x00001240 - 0x0000125f (0x20) IX[B]
[28] -1 0 0x00001220 - 0x0000123f (0x20) IX[B]
[29] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.16.20
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152),
MOBILITY RADEON 9600/9700 (M10/M11 4E50),
MOBILITY RADEON 9550 (M12 4E56), RADEON 9500 (R300 4144),
RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
RADEON X600 (RV380 5B62), FireGL V3100 (RV370 5B64),
MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464),
RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
MOBILITY RADEON X700 (M26 5653), RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.16.20
(II) ATI Proprietary Linux Driver Release Identifier: @@UNRELEASED_AND_UNSUPPORTED_DRIVER@@
(II) ATI Proprietary Linux Driver Build Date: Aug 16 2005 00:15:14
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.16.1-driver-lnx-206829
(--) Assigning device section with no busID to primary device
(EE) No devices detected.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
dragonix
Linux 2.0
Linux 2.0
 
Messaggi: 141
Iscritto il: dom gen 25, 2004 0:00
Località: Lecce

Messaggioda dragonix » dom ott 02, 2005 12:03

Dopo aver data fglrxconfig alla fine mi da questo messaggio:

Probing PCI bus for a supported graphics device...
unable to find any of the subsequent graphics boards:

- ATI FireGL V3100 / V3200 / V5000 / V5100 / V7100
- ATI FireGL X1 / X2 / X3 / Z1 / T2
- ATI FireGL 8700 / 8800
- ATI Mobility FireGL T2 / 9100 / V5000
- ATI Mobility Radeon 9000 / 9200 / 9600 /9800
- ATI Mobility Radeon X700
- ATI Radeon 8500 / 9000 / 9100 / 9200
- ATI Radeon 9500 / 9550 / 9600 / 9700 / 9800
- ATI Radeon X300 / X600 / X700 / X800 / X850
- ATI IGP Radeon 9100 / 9200/n - ATI IGP Mobility Radeon 9000 / 9100/n
After starting X11, auto-detection will take place.

If you want to forcefully bind to a specific PCI bus slot at a later time
then you have to edit the fglrx-BusID entry in your xorg.conf file.

Press [Enter] to continue, press 'q'&[Enter] or [Ctrl]+'c' to abort.

I driver installati sono gli ultimi: ati-driver-installer-8.16.20-i386.run
dragonix
Linux 2.0
Linux 2.0
 
Messaggi: 141
Iscritto il: dom gen 25, 2004 0:00
Località: Lecce

Messaggioda gallows » dom ott 02, 2005 12:09

Posta lspci.
Avatar utente
gallows
Staff
Staff
 
Messaggi: 3466
Iscritto il: dom set 19, 2004 23:00
Località: Palermo
Kernel: FreeBSD 8.0-RELEASE-p3
Desktop: ratpoison

Messaggioda dragonix » dom ott 02, 2005 12:10

Detto fatto:

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5462
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast Ethernet Controller (rev 10)
06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:06.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
dragonix
Linux 2.0
Linux 2.0
 
Messaggi: 141
Iscritto il: dom gen 25, 2004 0:00
Località: Lecce

Messaggioda gallows » dom ott 02, 2005 12:29

Avatar utente
gallows
Staff
Staff
 
Messaggi: 3466
Iscritto il: dom set 19, 2004 23:00
Località: Palermo
Kernel: FreeBSD 8.0-RELEASE-p3
Desktop: ratpoison

Messaggioda dragonix » dom ott 02, 2005 12:31

Come scheda mobility dice che supporta soltanto la x700... possibile?
Per quanto riguarda l'installazione dei driver non ho seguito la procedura descritta nei vari howto in quanto penso si riferisca ai driver vecchi. Ho semplicemente lanciato l'installer e seguito le poche istruzioni. Nel kernel non ho modificato niente... o devo fare qualcosa con agpart?
dragonix
Linux 2.0
Linux 2.0
 
Messaggi: 141
Iscritto il: dom gen 25, 2004 0:00
Località: Lecce

Messaggioda gallows » dom ott 02, 2005 12:33

dragonix ha scritto:Come scheda mobility dice che supporta soltanto la x700... possibile?
Per quanto riguarda l'installazione dei driver non ho seguito la procedura descritta nei vari howto in quanto penso si riferisca ai driver vecchi. Ho semplicemente lanciato l'installer e seguito le poche istruzioni. Nel kernel non ho modificato niente... o devo fare qualcosa con agpart?

Secondo il sito ati la tua scheda è supportata, l'agpgart deve essere modulare (ed è il tuo caso).
Avatar utente
gallows
Staff
Staff
 
Messaggi: 3466
Iscritto il: dom set 19, 2004 23:00
Località: Palermo
Kernel: FreeBSD 8.0-RELEASE-p3
Desktop: ratpoison

Messaggioda dragonix » dom ott 02, 2005 12:33

scusa scrivevo mentre tu stavi postando, ora do un'occhiata
dragonix
Linux 2.0
Linux 2.0
 
Messaggi: 141
Iscritto il: dom gen 25, 2004 0:00
Località: Lecce

Prossimo

Torna a Laptop

Chi c’è in linea

Visitano il forum: Nessuno e 3 ospiti