Repository 32bit  Forum
Repository 64bit  Wiki

kernel che patimento.. schermo nero all´avvio :(

Postate qui per tutte le discussioni legate a Linux in generale.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Gnu/Linux in genere, se l'argomento è specifico alla Slackware usate uno dei forum Slackware o Slackware64.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.

kernel che patimento.. schermo nero all´avvio :(

Messaggioda Sabax » dom nov 02, 2003 23:47

Salve. ho installato slackware 9.1 sul portatile, togliendo (formattazione docet :)) la "vecchia 9.0". <BR>Poi mi sono accinto a ricompilare il kernel 2.4.22 con un file .config presalvato. <BR>Make vari, ho copiato bzimage nel boot, scritto nel lilo, eseguito lilo e riavviato. <BR> Seleziono il nuovo kernel... lavora appena selezionato per caricare... poi quando dovrebbe cambiare schermata e vedere tutti i moduli che carica, lo schermo resta buio e non si riprende più. cosa ancora più strana è che il computer continua a lavorare. .sento (e vedo dal led) che carica tutto normalmente, ma il monitor resta imperterrito spento. sapete dirmi se ometto qualcosa? <BR>grazie<br>
Sabax
Linux 1.0
Linux 1.0
 
Messaggi: 27
Iscritto il: lun set 29, 2003 23:00
Località: livorno

kernel che patimento.. schermo nero all´avvio :(

Messaggioda Bob_Dylan » lun nov 03, 2003 0:50

mi viene da pensare al supporto del frame-buffer o alle prime 6-7 voci del Character devices...prova<br>
Bob_Dylan
Linux 1.0
Linux 1.0
 
Messaggi: 55
Iscritto il: sab giu 21, 2003 23:00
Località: M. Argentario

kernel che patimento.. schermo nero all´avvio :(

Messaggioda Sabax » mar nov 04, 2003 13:54

la configurazione del kernel è a posto. ho controllato, e tuto è modulare o incluso nel kernel. mi sorge un dubbio... non è che c´entra l´initrd? non credo che il setup lo crei...<br>
Sabax
Linux 1.0
Linux 1.0
 
Messaggi: 27
Iscritto il: lun set 29, 2003 23:00
Località: livorno

kernel che patimento.. schermo nero all´avvio :(

Messaggioda Tongiu » mar nov 04, 2003 15:40

forse hai inserito i font inglobati nel kernel. <BR>Nel 2.6.0 c´è un´opzione di questo tipo da cui è bene tenersi alla larga <BR>Graphic support -> Console display driver support -> select compiled-in fonts <BR> <BR>Ripeto : parlo del 2.6 non so se c´è nel 2.4.22 comunque abilitando quella opzione mi trovavo nella stessa tua situazione <BR> <BR>Tongiu<br>
Tongiu
Linux 1.0
Linux 1.0
 
Messaggi: 99
Iscritto il: lun mag 12, 2003 23:00

kernel che patimento.. schermo nero all´avvio :(

Messaggioda Sabax » mar nov 04, 2003 23:45

no. niente font inseriti... <BR>make dep (2.4.22), make bzImage, make modules , make modules_install,cp bzimage /boot/vmlinuz-sabax aggiunto una voce al lilo .conf. ma non è che va detto "initrd=" ? io vedo che all´inizio appare init 2.84.. <BR>x curiosità, nessuno di voi ha un .config funzionante, di qualunque versione 2.4.21-22 o 2.6.0beta da mandarmi, così con un bel diff capisco dove sbaglio? tanto l´unica soluzione è questa, oltre alle impostazioni del lilo. grazie<br>
Sabax
Linux 1.0
Linux 1.0
 
Messaggi: 27
Iscritto il: lun set 29, 2003 23:00
Località: livorno

kernel che patimento.. schermo nero all´avvio :(

Messaggioda Tongiu » gio nov 06, 2003 9:10

Eccoli in allegato <BR>il 2.6.0 è ancora in fase di test, lo sto affinando. <BR>il 2.4.22 è quello standard <BR>Tongiu<br>
Tongiu
Linux 1.0
Linux 1.0
 
Messaggi: 99
Iscritto il: lun mag 12, 2003 23:00

kernel che patimento.. schermo nero all´avvio :(

Messaggioda Tongiu » gio nov 06, 2003 9:19

Ho inserito gli allegati ma mi sa che non funziona..... <BR>Non me li vedo... <BR>Tongiu<br>
Tongiu
Linux 1.0
Linux 1.0
 
Messaggi: 99
Iscritto il: lun mag 12, 2003 23:00

kernel che patimento.. schermo nero all´avvio :(

Messaggioda Loris » gio nov 06, 2003 12:47

Si Tongiu ho provato pure io a inserire allegati e non funziona, stasera controllo grazie per la segnalazione :-? <br>
"Ho una testa piuttosto balzana e comunque non sono quello che credete" - Roger Keith Barrett
Avatar utente
Loris
Admin
Admin
 
Messaggi: 7583
Iscritto il: dom mar 30, 2003 23:00
Località: Gradisca D'Isonzo
Nome Cognome: Loris Vincenzi
Slackware: 14.1
Kernel: 3.10.17
Desktop: Kde 4.10.5

kernel che patimento.. schermo nero all´avvio :(

Messaggioda Tongiu » ven nov 07, 2003 9:20

.config del kernel 2.6.0test9 funzionante sul mio hardware (eventualmente cambia qulacosa nei driver <BR> <BR># <BR># Automatically generated make config: don´t edit <BR># <BR>CONFIG_X86=y <BR>CONFIG_MMU=y <BR>CONFIG_UID16=y <BR>CONFIG_GENERIC_ISA_DMA=y <BR> <BR># <BR># Code maturity level options <BR># <BR>CONFIG_EXPERIMENTAL=y <BR>CONFIG_CLEAN_COMPILE=y <BR>CONFIG_STANDALONE=y <BR>CONFIG_BROKEN_ON_SMP=y <BR> <BR># <BR># General setup <BR># <BR>CONFIG_SWAP=y <BR>CONFIG_SYSVIPC=y <BR>CONFIG_BSD_PROCESS_ACCT=y <BR>CONFIG_SYSCTL=y <BR>CONFIG_LOG_BUF_SHIFT=14 <BR>CONFIG_IKCONFIG=y <BR>CONFIG_IKCONFIG_PROC=y <BR># CONFIG_EMBEDDED is not set <BR>CONFIG_KALLSYMS=y <BR>CONFIG_FUTEX=y <BR>CONFIG_EPOLL=y <BR>CONFIG_IOSCHED_NOOP=y <BR>CONFIG_IOSCHED_AS=y <BR>CONFIG_IOSCHED_DEADLINE=y <BR> <BR># <BR># Loadable module support <BR># <BR>CONFIG_MODULES=y <BR>CONFIG_MODULE_UNLOAD=y <BR># CONFIG_MODULE_FORCE_UNLOAD is not set <BR>CONFIG_OBSOLETE_MODPARM=y <BR># CONFIG_MODVERSIONS is not set <BR>CONFIG_KMOD=y <BR> <BR># <BR># Processor type and features <BR># <BR>CONFIG_X86_PC=y <BR># CONFIG_X86_VOYAGER is not set <BR># CONFIG_X86_NUMAQ is not set <BR># CONFIG_X86_SUMMIT is not set <BR># CONFIG_X86_BIGSMP is not set <BR># CONFIG_X86_VISWS is not set <BR># CONFIG_X86_GENERICARCH is not set <BR># CONFIG_X86_ES7000 is not set <BR># CONFIG_M386 is not set <BR># CONFIG_M486 is not set <BR># CONFIG_M586 is not set <BR># CONFIG_M586TSC is not set <BR># CONFIG_M586MMX is not set <BR># CONFIG_M686 is not set <BR># CONFIG_MPENTIUMII is not set <BR>CONFIG_MPENTIUMIII=y <BR># CONFIG_MPENTIUM4 is not set <BR># CONFIG_MK6 is not set <BR># CONFIG_MK7 is not set <BR># CONFIG_MK8 is not set <BR># CONFIG_MELAN is not set <BR># CONFIG_MCRUSOE is not set <BR># CONFIG_MWINCHIPC6 is not set <BR># CONFIG_MWINCHIP2 is not set <BR># CONFIG_MWINCHIP3D is not set <BR># CONFIG_MCYRIXIII is not set <BR># CONFIG_MVIAC3_2 is not set <BR># CONFIG_X86_GENERIC is not set <BR>CONFIG_X86_CMPXCHG=y <BR>CONFIG_X86_XADD=y <BR>CONFIG_X86_L1_CACHE_SHIFT=5 <BR>CONFIG_RWSEM_XCHGADD_ALGORITHM=y <BR>CONFIG_X86_WP_WORKS_OK=y <BR>CONFIG_X86_INVLPG=y <BR>CONFIG_X86_BSWAP=y <BR>CONFIG_X86_POPAD_OK=y <BR>CONFIG_X86_GOOD_APIC=y <BR>CONFIG_X86_INTEL_USERCOPY=y <BR>CONFIG_X86_USE_PPRO_CHECKSUM=y <BR># CONFIG_HPET_TIMER is not set <BR># CONFIG_HPET_EMULATE_RTC is not set <BR># CONFIG_SMP is not set <BR>CONFIG_PREEMPT=y <BR>CONFIG_X86_UP_APIC=y <BR>CONFIG_X86_UP_IOAPIC=y <BR>CONFIG_X86_LOCAL_APIC=y <BR>CONFIG_X86_IO_APIC=y <BR>CONFIG_X86_TSC=y <BR># CONFIG_X86_MCE is not set <BR># CONFIG_TOSHIBA is not set <BR># CONFIG_I8K is not set <BR>CONFIG_MICROCODE=m <BR>CONFIG_X86_MSR=m <BR>CONFIG_X86_CPUID=m <BR># CONFIG_EDD is not set <BR>CONFIG_NOHIGHMEM=y <BR># CONFIG_HIGHMEM4G is not set <BR># CONFIG_HIGHMEM64G is not set <BR># CONFIG_MATH_EMULATION is not set <BR>CONFIG_MTRR=y <BR>CONFIG_HAVE_DEC_LOCK=y <BR> <BR># <BR># Power management options (ACPI, APM) <BR># <BR>CONFIG_PM=y <BR># CONFIG_SOFTWARE_SUSPEND is not set <BR># CONFIG_PM_DISK is not set <BR> <BR># <BR># ACPI (Advanced Configuration and Power Interface) Support <BR># <BR># CONFIG_ACPI is not set <BR> <BR># <BR># APM (Advanced Power Management) BIOS Support <BR># <BR>CONFIG_APM=m <BR># CONFIG_APM_IGNORE_USER_SUSPEND is not set <BR># CONFIG_APM_DO_ENABLE is not set <BR># CONFIG_APM_CPU_IDLE is not set <BR># CONFIG_APM_DISPLAY_BLANK is not set <BR># CONFIG_APM_RTC_IS_GMT is not set <BR># CONFIG_APM_ALLOW_INTS is not set <BR># CONFIG_APM_REAL_MODE_POWER_OFF is not set <BR> <BR># <BR># CPU Frequency scaling <BR># <BR># CONFIG_CPU_FREQ is not set <BR> <BR># <BR># Bus options (PCI, PCMCIA, EISA, MCA, ISA) <BR># <BR>CONFIG_PCI=y <BR>CONFIG_PCI_GOBIOS=y <BR># CONFIG_PCI_GODIRECT is not set <BR># CONFIG_PCI_GOANY is not set <BR>CONFIG_PCI_BIOS=y <BR>CONFIG_PCI_LEGACY_PROC=y <BR>CONFIG_PCI_NAMES=y <BR>CONFIG_ISA=y <BR># CONFIG_EISA is not set <BR># CONFIG_MCA is not set <BR># CONFIG_SCx200 is not set <BR>CONFIG_HOTPLUG=y <BR> <BR># <BR># PCMCIA/CardBus support <BR># <BR>CONFIG_PCMCIA=m <BR>CONFIG_YENTA=m <BR>CONFIG_CARDBUS=y <BR>CONFIG_I82092=m <BR>CONFIG_I82365=m <BR>CONFIG_TCIC=m <BR>CONFIG_PCMCIA_PROBE=y <BR> <BR># <BR># PCI Hotplug Support <BR># <BR># CONFIG_HOTPLUG_PCI is not set <BR> <BR># <BR># Executable file formats <BR># <BR>CONFIG_BINFMT_ELF=y <BR>CONFIG_BINFMT_AOUT=y <BR>CONFIG_BINFMT_MISC=y <BR> <BR># <BR># Device Drivers <BR># <BR> <BR># <BR># Generic Driver Options <BR># <BR># CONFIG_FW_LOADER is not set <BR> <BR># <BR># Memory Technology Devices (MTD) <BR># <BR># CONFIG_MTD is not set <BR> <BR># <BR># Parallel port support <BR># <BR>CONFIG_PARPORT=m <BR>CONFIG_PARPORT_PC=m <BR>CONFIG_PARPORT_PC_CML1=m <BR>CONFIG_PARPORT_SERIAL=m <BR># CONFIG_PARPORT_PC_FIFO is not set <BR># CONFIG_PARPORT_PC_SUPERIO is not set <BR>CONFIG_PARPORT_PC_PCMCIA=m <BR># CONFIG_PARPORT_OTHER is not set <BR>CONFIG_PARPORT_1284=y <BR> <BR># <BR># Plug and Play support <BR># <BR>CONFIG_PNP=y <BR># CONFIG_PNP_DEBUG is not set <BR> <BR># <BR># Protocols <BR># <BR>CONFIG_ISAPNP=y <BR># CONFIG_PNPBIOS is not set <BR> <BR># <BR># Block devices <BR># <BR>CONFIG_BLK_DEV_FD=y <BR># CONFIG_BLK_DEV_XD is not set <BR>CONFIG_PARIDE=m <BR>CONFIG_PARIDE_PARPORT=m <BR> <BR># <BR># Parallel IDE high-level drivers <BR># <BR>CONFIG_PARIDE_PD=m <BR>CONFIG_PARIDE_PCD=m <BR>CONFIG_PARIDE_PF=m <BR>CONFIG_PARIDE_PT=m <BR>CONFIG_PARIDE_PG=m <BR> <BR># <BR># Parallel IDE protocol modules <BR># <BR>CONFIG_PARIDE_ATEN=m <BR>CONFIG_PARIDE_BPCK=m <BR>CONFIG_PARIDE_BPCK6=m <BR>CONFIG_PARIDE_COMM=m <BR>CONFIG_PARIDE_DSTR=m <BR>CONFIG_PARIDE_FIT2=m <BR>CONFIG_PARIDE_FIT3=m <BR># CONFIG_PARIDE_EPAT is not set <BR># CONFIG_PARIDE_EPIA is not set <BR># CONFIG_PARIDE_FRIQ is not set <BR># CONFIG_PARIDE_FRPW is not set <BR># CONFIG_PARIDE_KBIC is not set <BR># CONFIG_PARIDE_KTTI is not set <BR># CONFIG_PARIDE_ON20 is not set <BR># CONFIG_PARIDE_ON26 is not set <BR>CONFIG_BLK_CPQ_DA=m <BR># CONFIG_BLK_CPQ_CISS_DA is not set <BR># CONFIG_BLK_DEV_DAC960 is not set <BR># CONFIG_BLK_DEV_UMEM is not set <BR>CONFIG_BLK_DEV_LOOP=y <BR># CONFIG_BLK_DEV_CRYPTOLOOP is not set <BR>CONFIG_BLK_DEV_NBD=m <BR>CONFIG_BLK_DEV_RAM=y <BR>CONFIG_BLK_DEV_RAM_SIZE=4096 <BR>CONFIG_BLK_DEV_INITRD=y <BR># CONFIG_LBD is not set <BR> <BR># <BR># ATA/ATAPI/MFM/RLL support <BR># <BR>CONFIG_IDE=y <BR>CONFIG_BLK_DEV_IDE=y <BR> <BR># <BR># Please see Documentation/ide.txt for help/info on IDE drives <BR># <BR># CONFIG_BLK_DEV_HD_IDE is not set <BR>CONFIG_BLK_DEV_IDEDISK=y <BR>CONFIG_IDEDISK_MULTI_MODE=y <BR># CONFIG_IDEDISK_STROKE is not set <BR>CONFIG_BLK_DEV_IDECS=m <BR>CONFIG_BLK_DEV_IDECD=y <BR># CONFIG_BLK_DEV_IDETAPE is not set <BR>CONFIG_BLK_DEV_IDEFLOPPY=m <BR>CONFIG_BLK_DEV_IDESCSI=m <BR># CONFIG_IDE_TASK_IOCTL is not set <BR># CONFIG_IDE_TASKFILE_IO is not set <BR> <BR># <BR># IDE chipset support/bugfixes <BR># <BR>CONFIG_BLK_DEV_CMD640=y <BR># CONFIG_BLK_DEV_CMD640_ENHANCED is not set <BR># CONFIG_BLK_DEV_IDEPNP is not set <BR>CONFIG_BLK_DEV_IDEPCI=y <BR>CONFIG_IDEPCI_SHARE_IRQ=y <BR># CONFIG_BLK_DEV_OFFBOARD is not set <BR>CONFIG_BLK_DEV_GENERIC=y <BR># CONFIG_BLK_DEV_OPTI621 is not set <BR>CONFIG_BLK_DEV_RZ1000=y <BR>CONFIG_BLK_DEV_IDEDMA_PCI=y <BR># CONFIG_BLK_DEV_IDE_TCQ is not set <BR># CONFIG_BLK_DEV_IDEDMA_FORCED is not set <BR>CONFIG_IDEDMA_PCI_AUTO=y <BR># CONFIG_IDEDMA_ONLYDISK is not set <BR># CONFIG_IDEDMA_PCI_WIP is not set <BR>CONFIG_BLK_DEV_ADMA=y <BR># CONFIG_BLK_DEV_AEC62XX is not set <BR># CONFIG_BLK_DEV_ALI15X3 is not set <BR># CONFIG_BLK_DEV_AMD74XX is not set <BR># CONFIG_BLK_DEV_CMD64X is not set <BR># CONFIG_BLK_DEV_TRIFLEX is not set <BR># CONFIG_BLK_DEV_CY82C693 is not set <BR># CONFIG_BLK_DEV_CS5520 is not set <BR># CONFIG_BLK_DEV_CS5530 is not set <BR># CONFIG_BLK_DEV_HPT34X is not set <BR># CONFIG_BLK_DEV_HPT366 is not set <BR># CONFIG_BLK_DEV_SC1200 is not set <BR>CONFIG_BLK_DEV_PIIX=y <BR># CONFIG_BLK_DEV_NS87415 is not set <BR># CONFIG_BLK_DEV_PDC202XX_OLD is not set <BR># CONFIG_BLK_DEV_PDC202XX_NEW is not set <BR># CONFIG_BLK_DEV_SVWKS is not set <BR># CONFIG_BLK_DEV_SIIMAGE is not set <BR># CONFIG_BLK_DEV_SIS5513 is not set <BR># CONFIG_BLK_DEV_SLC90E66 is not set <BR># CONFIG_BLK_DEV_TRM290 is not set <BR># CONFIG_BLK_DEV_VIA82CXXX is not set <BR># CONFIG_IDE_CHIPSETS is not set <BR>CONFIG_BLK_DEV_IDEDMA=y <BR># CONFIG_IDEDMA_IVB is not set <BR>CONFIG_IDEDMA_AUTO=y <BR># CONFIG_DMA_NONPCI is not set <BR># CONFIG_BLK_DEV_HD is not set <BR> <BR># <BR># SCSI device support <BR># <BR>CONFIG_SCSI=y <BR>CONFIG_SCSI_PROC_FS=y <BR> <BR># <BR># SCSI support type (disk, tape, CD-ROM) <BR># <BR>CONFIG_BLK_DEV_SD=y <BR>CONFIG_CHR_DEV_ST=m <BR>CONFIG_CHR_DEV_OSST=m <BR>CONFIG_BLK_DEV_SR=y <BR>CONFIG_BLK_DEV_SR_VENDOR=y <BR>CONFIG_CHR_DEV_SG=m <BR> <BR># <BR># Some SCSI devices (e.g. CD jukebox) support multiple LUNs <BR># <BR># CONFIG_SCSI_MULTI_LUN is not set <BR># CONFIG_SCSI_REPORT_LUNS is not set <BR># CONFIG_SCSI_CONSTANTS is not set <BR># CONFIG_SCSI_LOGGING is not set <BR> <BR># <BR># SCSI low-level drivers <BR># <BR># CONFIG_BLK_DEV_3W_XXXX_RAID is not set <BR># CONFIG_SCSI_7000FASST is not set <BR># CONFIG_SCSI_ACARD is not set <BR># CONFIG_SCSI_AHA152X is not set <BR># CONFIG_SCSI_AHA1542 is not set <BR># CONFIG_SCSI_AACRAID is not set <BR># CONFIG_SCSI_AIC7XXX is not set <BR># CONFIG_SCSI_AIC7XXX_OLD is not set <BR># CONFIG_SCSI_AIC79XX is not set <BR>CONFIG_SCSI_ADVANSYS=m <BR># CONFIG_SCSI_IN2000 is not set <BR># CONFIG_SCSI_MEGARAID is not set <BR>CONFIG_SCSI_SATA=y <BR># CONFIG_SCSI_SATA_SVW is not set <BR>CONFIG_SCSI_ATA_PIIX=m <BR># CONFIG_SCSI_SATA_PROMISE is not set <BR># CONFIG_SCSI_SATA_VIA is not set <BR># CONFIG_SCSI_BUSLOGIC is not set <BR># CONFIG_SCSI_CPQFCTS is not set <BR># CONFIG_SCSI_DMX3191D is not set <BR># CONFIG_SCSI_DTC3280 is not set <BR># CONFIG_SCSI_EATA is not set <BR># CONFIG_SCSI_EATA_PIO is not set <BR># CONFIG_SCSI_FUTURE_DOMAIN is not set <BR># CONFIG_SCSI_GDTH is not set <BR># CONFIG_SCSI_GENERIC_NCR5380 is not set <BR># CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set <BR># CONFIG_SCSI_IPS is not set <BR># CONFIG_SCSI_INIA100 is not set <BR># CONFIG_SCSI_PPA is not set <BR># CONFIG_SCSI_IMM is not set <BR># CONFIG_SCSI_NCR53C406A is not set <BR># CONFIG_SCSI_SYM53C8XX_2 is not set <BR># CONFIG_SCSI_PAS16 is not set <BR># CONFIG_SCSI_PSI240I is not set <BR># CONFIG_SCSI_QLOGIC_FAS is not set <BR># CONFIG_SCSI_QLOGIC_ISP is not set <BR># CONFIG_SCSI_QLOGIC_FC is not set <BR># CONFIG_SCSI_QLOGIC_1280 is not set <BR># CONFIG_SCSI_SYM53C416 is not set <BR># CONFIG_SCSI_DC395x is not set <BR># CONFIG_SCSI_T128 is not set <BR># CONFIG_SCSI_U14_34F is not set <BR># CONFIG_SCSI_ULTRASTOR is not set <BR># CONFIG_SCSI_NSP32 is not set <BR># CONFIG_SCSI_DEBUG is not set <BR> <BR># <BR># PCMCIA SCSI adapter support <BR># <BR>CONFIG_PCMCIA_AHA152X=m <BR>CONFIG_PCMCIA_FDOMAIN=m <BR>CONFIG_PCMCIA_NINJA_SCSI=m <BR>CONFIG_PCMCIA_QLOGIC=m <BR> <BR># <BR># Old CD-ROM drivers (not SCSI, not IDE) <BR># <BR># CONFIG_CD_NO_IDESCSI is not set <BR> <BR># <BR># Multi-device support (RAID and LVM) <BR># <BR># CONFIG_MD is not set <BR> <BR># <BR># Fusion MPT device support <BR># <BR># CONFIG_FUSION is not set <BR> <BR># <BR># IEEE 1394 (FireWire) support (EXPERIMENTAL) <BR># <BR># CONFIG_IEEE1394 is not set <BR> <BR># <BR># I2O device support <BR># <BR>CONFIG_I2O=m <BR>CONFIG_I2O_PCI=m <BR>CONFIG_I2O_BLOCK=m <BR>CONFIG_I2O_SCSI=m <BR>CONFIG_I2O_PROC=m <BR> <BR># <BR># Networking support <BR># <BR>CONFIG_NET=y <BR> <BR># <BR># Networking options <BR># <BR>CONFIG_PACKET=y <BR># CONFIG_PACKET_MMAP is not set <BR># CONFIG_NETLINK_DEV is not set <BR>CONFIG_UNIX=y <BR># CONFIG_NET_KEY is not set <BR>CONFIG_INET=y <BR>CONFIG_IP_MULTICAST=y <BR># CONFIG_IP_ADVANCED_ROUTER is not set <BR># CONFIG_IP_PNP is not set <BR># CONFIG_NET_IPIP is not set <BR># CONFIG_NET_IPGRE is not set <BR># CONFIG_IP_MROUTE is not set <BR># CONFIG_ARPD is not set <BR># CONFIG_INET_ECN is not set <BR># CONFIG_SYN_COOKIES is not set <BR># CONFIG_INET_AH is not set <BR># CONFIG_INET_ESP is not set <BR># CONFIG_INET_IPCOMP is not set <BR># CONFIG_IPV6 is not set <BR># CONFIG_DECNET is not set <BR># CONFIG_BRIDGE is not set <BR># CONFIG_NETFILTER is not set <BR> <BR># <BR># SCTP Configuration (EXPERIMENTAL) <BR># <BR>CONFIG_IPV6_SCTP__=y <BR># CONFIG_IP_SCTP is not set <BR># CONFIG_ATM is not set <BR># CONFIG_VLAN_8021Q is not set <BR># CONFIG_LLC2 is not set <BR># CONFIG_IPX is not set <BR># CONFIG_ATALK is not set <BR># CONFIG_X25 is not set <BR># CONFIG_LAPB is not set <BR># CONFIG_NET_DIVERT is not set <BR># CONFIG_ECONET is not set <BR># CONFIG_WAN_ROUTER is not set <BR># CONFIG_NET_FASTROUTE is not set <BR># CONFIG_NET_HW_FLOWCONTROL is not set <BR> <BR># <BR># QoS and/or fair queueing <BR># <BR># CONFIG_NET_SCHED is not set <BR> <BR># <BR># Network testing <BR># <BR># CONFIG_NET_PKTGEN is not set <BR>CONFIG_NETDEVICES=y <BR> <BR># <BR># ARCnet devices <BR># <BR># CONFIG_ARCNET is not set <BR>CONFIG_DUMMY=m <BR>CONFIG_BONDING=m <BR>CONFIG_EQUALIZER=m <BR>CONFIG_TUN=m <BR>CONFIG_NET_SB1000=m <BR> <BR># <BR># Ethernet (10 or 100Mbit) <BR># <BR>CONFIG_NET_ETHERNET=y <BR>CONFIG_MII=y <BR># CONFIG_HAPPYMEAL is not set <BR># CONFIG_SUNGEM is not set <BR># CONFIG_NET_VENDOR_3COM is not set <BR># CONFIG_LANCE is not set <BR># CONFIG_NET_VENDOR_SMC is not set <BR># CONFIG_NET_VENDOR_RACAL is not set <BR> <BR># <BR># Tulip family network device support <BR># <BR># CONFIG_NET_TULIP is not set <BR># CONFIG_AT1700 is not set <BR># CONFIG_DEPCA is not set <BR># CONFIG_HP100 is not set <BR>CONFIG_NET_ISA=y <BR># CONFIG_E2100 is not set <BR># CONFIG_EWRK3 is not set <BR>CONFIG_EEXPRESS=m <BR>CONFIG_EEXPRESS_PRO=m <BR># CONFIG_HPLAN_PLUS is not set <BR># CONFIG_HPLAN is not set <BR># CONFIG_LP486E is not set <BR>CONFIG_ETH16I=y <BR># CONFIG_NE2000 is not set <BR># CONFIG_ZNET is not set <BR># CONFIG_SEEQ8005 is not set <BR>CONFIG_NET_PCI=y <BR># CONFIG_PCNET32 is not set <BR># CONFIG_AMD8111_ETH is not set <BR># CONFIG_ADAPTEC_STARFIRE is not set <BR># CONFIG_AC3200 is not set <BR># CONFIG_APRICOT is not set <BR># CONFIG_B44 is not set <BR># CONFIG_CS89x0 is not set <BR># CONFIG_DGRS is not set <BR>CONFIG_EEPRO100=y <BR># CONFIG_EEPRO100_PIO is not set <BR>CONFIG_E100=m <BR># CONFIG_FEALNX is not set <BR># CONFIG_NATSEMI is not set <BR># CONFIG_NE2K_PCI is not set <BR># CONFIG_8139CP is not set <BR># CONFIG_8139TOO is not set <BR># CONFIG_SIS900 is not set <BR># CONFIG_EPIC100 is not set <BR># CONFIG_SUNDANCE is not set <BR># CONFIG_TLAN is not set <BR># CONFIG_VIA_RHINE is not set <BR>CONFIG_NET_POCKET=y <BR>CONFIG_ATP=m <BR>CONFIG_DE600=m <BR>CONFIG_DE620=m <BR> <BR># <BR># Ethernet (1000 Mbit) <BR># <BR># CONFIG_ACENIC is not set <BR># CONFIG_DL2K is not set <BR># CONFIG_E1000 is not set <BR># CONFIG_NS83820 is not set <BR># CONFIG_HAMACHI is not set <BR># CONFIG_YELLOWFIN is not set <BR># CONFIG_R8169 is not set <BR># CONFIG_SIS190 is not set <BR># CONFIG_SK98LIN is not set <BR># CONFIG_TIGON3 is not set <BR> <BR># <BR># Ethernet (10000 Mbit) <BR># <BR># CONFIG_IXGB is not set <BR># CONFIG_FDDI is not set <BR># CONFIG_HIPPI is not set <BR>CONFIG_PLIP=m <BR>CONFIG_PPP=m <BR>CONFIG_PPP_MULTILINK=y <BR>CONFIG_PPP_FILTER=y <BR>CONFIG_PPP_ASYNC=m <BR>CONFIG_PPP_SYNC_TTY=m <BR>CONFIG_PPP_DEFLATE=m <BR>CONFIG_PPP_BSDCOMP=m <BR>CONFIG_PPPOE=m <BR>CONFIG_SLIP=m <BR>CONFIG_SLIP_COMPRESSED=y <BR>CONFIG_SLIP_SMART=y <BR>CONFIG_SLIP_MODE_SLIP6=y <BR> <BR># <BR># Wireless LAN (non-hamradio) <BR># <BR># CONFIG_NET_RADIO is not set <BR> <BR># <BR># Token Ring devices <BR># <BR># CONFIG_TR is not set <BR># CONFIG_NET_FC is not set <BR># CONFIG_RCPCI is not set <BR># CONFIG_SHAPER is not set <BR> <BR># <BR># Wan interfaces <BR># <BR># CONFIG_WAN is not set <BR> <BR># <BR># PCMCIA network device support <BR># <BR>CONFIG_NET_PCMCIA=y <BR>CONFIG_PCMCIA_3C589=m <BR>CONFIG_PCMCIA_3C574=m <BR>CONFIG_PCMCIA_FMVJ18X=m <BR>CONFIG_PCMCIA_PCNET=m <BR>CONFIG_PCMCIA_NMCLAN=m <BR>CONFIG_PCMCIA_SMC91C92=m <BR>CONFIG_PCMCIA_XIRC2PS=m <BR>CONFIG_PCMCIA_AXNET=m <BR> <BR># <BR># Amateur Radio support <BR># <BR># CONFIG_HAMRADIO is not set <BR> <BR># <BR># IrDA (infrared) support <BR># <BR>CONFIG_IRDA=m <BR> <BR># <BR># IrDA protocols <BR># <BR>CONFIG_IRLAN=m <BR># CONFIG_IRNET is not set <BR>CONFIG_IRCOMM=m <BR>CONFIG_IRDA_ULTRA=y <BR> <BR># <BR># IrDA options <BR># <BR>CONFIG_IRDA_CACHE_LAST_LSAP=y <BR>CONFIG_IRDA_FAST_RR=y <BR># CONFIG_IRDA_DEBUG is not set <BR> <BR># <BR># Infrared-port device drivers <BR># <BR> <BR># <BR># SIR device drivers <BR># <BR>CONFIG_IRTTY_SIR=m <BR> <BR># <BR># Dongle support <BR># <BR>CONFIG_DONGLE=y <BR>CONFIG_ESI_DONGLE=m <BR>CONFIG_ACTISYS_DONGLE=m <BR>CONFIG_TEKRAM_DONGLE=m <BR> <BR># <BR># Old SIR device drivers <BR># <BR>CONFIG_IRPORT_SIR=m <BR> <BR># <BR># Old Serial dongle support <BR># <BR>CONFIG_DONGLE_OLD=y <BR>CONFIG_ESI_DONGLE_OLD=m <BR>CONFIG_ACTISYS_DONGLE_OLD=m <BR>CONFIG_TEKRAM_DONGLE_OLD=m <BR>CONFIG_GIRBIL_DONGLE=m <BR>CONFIG_LITELINK_DONGLE=m <BR>CONFIG_MCP2120_DONGLE=m <BR>CONFIG_OLD_BELKIN_DONGLE=m <BR>CONFIG_ACT200L_DONGLE=m <BR>CONFIG_MA600_DONGLE=m <BR> <BR># <BR># FIR device drivers <BR># <BR>CONFIG_USB_IRDA=m <BR>CONFIG_NSC_FIR=m <BR>CONFIG_WINBOND_FIR=m <BR>CONFIG_TOSHIBA_FIR=m <BR>CONFIG_SMC_IRCC_FIR=m <BR>CONFIG_ALI_FIR=m <BR>CONFIG_VLSI_FIR=m <BR>CONFIG_VIA_FIR=m <BR> <BR># <BR># Bluetooth support <BR># <BR>CONFIG_BT=m <BR>CONFIG_BT_L2CAP=m <BR>CONFIG_BT_SCO=m <BR>CONFIG_BT_RFCOMM=m <BR>CONFIG_BT_RFCOMM_TTY=y <BR>CONFIG_BT_BNEP=m <BR>CONFIG_BT_BNEP_MC_FILTER=y <BR>CONFIG_BT_BNEP_PROTO_FILTER=y <BR> <BR># <BR># Bluetooth device drivers <BR># <BR>CONFIG_BT_HCIUSB=m <BR>CONFIG_BT_USB_SCO=y <BR>CONFIG_BT_USB_ZERO_PACKET=y <BR>CONFIG_BT_HCIUART=m <BR>CONFIG_BT_HCIUART_H4=y <BR>CONFIG_BT_HCIUART_BCSP=y <BR>CONFIG_BT_HCIUART_BCSP_TXCRC=y <BR>CONFIG_BT_HCIDTL1=m <BR>CONFIG_BT_HCIBT3C=m <BR>CONFIG_BT_HCIBLUECARD=m <BR>CONFIG_BT_HCIBTUART=m <BR>CONFIG_BT_HCIVHCI=m <BR> <BR># <BR># ISDN subsystem <BR># <BR># CONFIG_ISDN_BOOL is not set <BR> <BR># <BR># Telephony Support <BR># <BR>CONFIG_PHONE=m <BR>CONFIG_PHONE_IXJ=m <BR>CONFIG_PHONE_IXJ_PCMCIA=m <BR> <BR># <BR># Input device support <BR># <BR>CONFIG_INPUT=y <BR> <BR># <BR># Userland interfaces <BR># <BR>CONFIG_INPUT_MOUSEDEV=y <BR>CONFIG_INPUT_MOUSEDEV_PSAUX=y <BR>CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 <BR>CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 <BR>CONFIG_INPUT_JOYDEV=m <BR># CONFIG_INPUT_TSDEV is not set <BR># CONFIG_INPUT_EVDEV is not set <BR># CONFIG_INPUT_EVBUG is not set <BR> <BR># <BR># Input I/O drivers <BR># <BR># CONFIG_GAMEPORT is not set <BR>CONFIG_SOUND_GAMEPORT=y <BR>CONFIG_SERIO=y <BR>CONFIG_SERIO_I8042=y <BR># CONFIG_SERIO_SERPORT is not set <BR># CONFIG_SERIO_CT82C710 is not set <BR>CONFIG_SERIO_PARKBD=m <BR>CONFIG_SERIO_PCIPS2=m <BR> <BR># <BR># Input Device Drivers <BR># <BR>CONFIG_INPUT_KEYBOARD=y <BR>CONFIG_KEYBOARD_ATKBD=y <BR># CONFIG_KEYBOARD_SUNKBD is not set <BR># CONFIG_KEYBOARD_XTKBD is not set <BR># CONFIG_KEYBOARD_NEWTON is not set <BR>CONFIG_INPUT_MOUSE=y <BR>CONFIG_MOUSE_PS2=y <BR># CONFIG_MOUSE_PS2_SYNAPTICS is not set <BR>CONFIG_MOUSE_SERIAL=m <BR># CONFIG_MOUSE_INPORT is not set <BR>CONFIG_MOUSE_LOGIBM=m <BR>CONFIG_MOUSE_PC110PAD=m <BR># CONFIG_INPUT_JOYSTICK is not set <BR># CONFIG_INPUT_TOUCHSCREEN is not set <BR>CONFIG_INPUT_MISC=y <BR>CONFIG_INPUT_PCSPKR=y <BR>CONFIG_INPUT_UINPUT=m <BR> <BR># <BR># Character devices <BR># <BR>CONFIG_VT=y <BR>CONFIG_VT_CONSOLE=y <BR>CONFIG_HW_CONSOLE=y <BR># CONFIG_SERIAL_NONSTANDARD is not set <BR> <BR># <BR># Serial drivers <BR># <BR>CONFIG_SERIAL_8250=y <BR>CONFIG_SERIAL_8250_CONSOLE=y <BR>CONFIG_SERIAL_8250_CS=m <BR>CONFIG_SERIAL_8250_NR_UARTS=4 <BR>CONFIG_SERIAL_8250_EXTENDED=y <BR>CONFIG_SERIAL_8250_MANY_PORTS=y <BR>CONFIG_SERIAL_8250_SHARE_IRQ=y <BR>CONFIG_SERIAL_8250_DETECT_IRQ=y <BR>CONFIG_SERIAL_8250_MULTIPORT=y <BR>CONFIG_SERIAL_8250_RSA=y <BR> <BR># <BR># Non-8250 serial port support <BR># <BR>CONFIG_SERIAL_CORE=y <BR>CONFIG_SERIAL_CORE_CONSOLE=y <BR>CONFIG_UNIX98_PTYS=y <BR>CONFIG_UNIX98_PTY_COUNT=256 <BR>CONFIG_PRINTER=m <BR>CONFIG_LP_CONSOLE=y <BR>CONFIG_PPDEV=m <BR># CONFIG_TIPAR is not set <BR> <BR># <BR># I2C support <BR># <BR>CONFIG_I2C=m <BR>CONFIG_I2C_CHARDEV=m <BR> <BR># <BR># I2C Algorithms <BR># <BR>CONFIG_I2C_ALGOBIT=m <BR>CONFIG_I2C_ALGOPCF=m <BR> <BR># <BR># I2C Hardware Bus support <BR># <BR>CONFIG_I2C_ALI1535=m <BR>CONFIG_I2C_ALI15X3=m <BR>CONFIG_I2C_AMD756=m <BR>CONFIG_I2C_AMD8111=m <BR># CONFIG_I2C_ELEKTOR is not set <BR># CONFIG_I2C_ELV is not set <BR>CONFIG_I2C_I801=m <BR># CONFIG_I2C_I810 is not set <BR>CONFIG_I2C_ISA=m <BR>CONFIG_I2C_NFORCE2=m <BR># CONFIG_I2C_PHILIPSPAR is not set <BR>CONFIG_I2C_PIIX4=m <BR># CONFIG_I2C_PROSAVAGE is not set <BR># CONFIG_I2C_SAVAGE4 is not set <BR># CONFIG_SCx200_ACB is not set <BR>CONFIG_I2C_SIS5595=m <BR>CONFIG_I2C_SIS630=m <BR>CONFIG_I2C_SIS96X=m <BR># CONFIG_I2C_VELLEMAN is not set <BR># CONFIG_I2C_VIA is not set <BR>CONFIG_I2C_VIAPRO=m <BR># CONFIG_I2C_VOODOO3 is not set <BR> <BR># <BR># I2C Hardware Sensors Chip support <BR># <BR>CONFIG_I2C_SENSOR=m <BR>CONFIG_SENSORS_ADM1021=m <BR>CONFIG_SENSORS_EEPROM=m <BR>CONFIG_SENSORS_IT87=m <BR>CONFIG_SENSORS_LM75=m <BR>CONFIG_SENSORS_LM78=m <BR>CONFIG_SENSORS_LM85=m <BR>CONFIG_SENSORS_VIA686A=m <BR>CONFIG_SENSORS_W83781D=m <BR> <BR># <BR># Mice <BR># <BR>CONFIG_BUSMOUSE=m <BR># CONFIG_QIC02_TAPE is not set <BR> <BR># <BR># IPMI <BR># <BR># CONFIG_IPMI_HANDLER is not set <BR> <BR># <BR># Watchdog Cards <BR># <BR># CONFIG_WATCHDOG is not set <BR># CONFIG_HW_RANDOM is not set <BR># CONFIG_NVRAM is not set <BR>CONFIG_RTC=m <BR>CONFIG_GEN_RTC=m <BR>CONFIG_GEN_RTC_X=y <BR>CONFIG_DTLK=m <BR>CONFIG_R3964=m <BR>CONFIG_APPLICOM=m <BR>CONFIG_SONYPI=m <BR> <BR># <BR># Ftape, the floppy tape device driver <BR># <BR># CONFIG_FTAPE is not set <BR>CONFIG_AGP=y <BR># CONFIG_AGP_ALI is not set <BR>CONFIG_AGP_ATI=m <BR># CONFIG_AGP_AMD is not set <BR># CONFIG_AGP_AMD64 is not set <BR>CONFIG_AGP_INTEL=y <BR># CONFIG_AGP_NVIDIA is not set <BR># CONFIG_AGP_SIS is not set <BR># CONFIG_AGP_SWORKS is not set <BR># CONFIG_AGP_VIA is not set <BR>CONFIG_DRM=y <BR># CONFIG_DRM_TDFX is not set <BR># CONFIG_DRM_GAMMA is not set <BR>CONFIG_DRM_R128=m <BR>CONFIG_DRM_RADEON=m <BR># CONFIG_DRM_I810 is not set <BR>CONFIG_DRM_I830=m <BR># CONFIG_DRM_MGA is not set <BR># CONFIG_DRM_SIS is not set <BR> <BR># <BR># PCMCIA character devices <BR># <BR>CONFIG_SYNCLINK_CS=m <BR>CONFIG_MWAVE=m <BR>CONFIG_RAW_DRIVER=m <BR>CONFIG_MAX_RAW_DEVS=256 <BR>CONFIG_HANGCHECK_TIMER=m <BR> <BR># <BR># Multimedia devices <BR># <BR>CONFIG_VIDEO_DEV=m <BR> <BR># <BR># Video For Linux <BR># <BR> <BR># <BR># Video Adapters <BR># <BR># CONFIG_VIDEO_BT848 is not set <BR># CONFIG_VIDEO_PMS is not set <BR># CONFIG_VIDEO_BWQCAM is not set <BR># CONFIG_VIDEO_CQCAM is not set <BR># CONFIG_VIDEO_W9966 is not set <BR># CONFIG_VIDEO_CPIA is not set <BR># CONFIG_VIDEO_SAA5249 is not set <BR># CONFIG_TUNER_3036 is not set <BR># CONFIG_VIDEO_STRADIS is not set <BR># CONFIG_VIDEO_ZORAN is not set <BR># CONFIG_VIDEO_MEYE is not set <BR># CONFIG_VIDEO_SAA7134 is not set <BR># CONFIG_VIDEO_MXB is not set <BR># CONFIG_VIDEO_DPC is not set <BR># CONFIG_VIDEO_HEXIUM_ORION is not set <BR># CONFIG_VIDEO_HEXIUM_GEMINI is not set <BR> <BR># <BR># Radio Adapters <BR># <BR># CONFIG_RADIO_CADET is not set <BR># CONFIG_RADIO_RTRACK is not set <BR># CONFIG_RADIO_RTRACK2 is not set <BR># CONFIG_RADIO_AZTECH is not set <BR># CONFIG_RADIO_GEMTEK is not set <BR># CONFIG_RADIO_GEMTEK_PCI is not set <BR># CONFIG_RADIO_MAXIRADIO is not set <BR># CONFIG_RADIO_MAESTRO is not set <BR># CONFIG_RADIO_SF16FMI is not set <BR># CONFIG_RADIO_TERRATEC is not set <BR># CONFIG_RADIO_TRUST is not set <BR># CONFIG_RADIO_TYPHOON is not set <BR># CONFIG_RADIO_ZOLTRIX is not set <BR> <BR># <BR># Digital Video Broadcasting Devices <BR># <BR>CONFIG_DVB=y <BR>CONFIG_DVB_CORE=m <BR> <BR># <BR># Supported Frontend Modules <BR># <BR>CONFIG_DVB_STV0299=m <BR>CONFIG_DVB_SP887X=m <BR>CONFIG_DVB_ALPS_TDLB7=m <BR>CONFIG_DVB_ALPS_TDMB7=m <BR>CONFIG_DVB_ATMEL_AT76C651=m <BR>CONFIG_DVB_CX24110=m <BR>CONFIG_DVB_GRUNDIG_29504_491=m <BR>CONFIG_DVB_GRUNDIG_29504_401=m <BR>CONFIG_DVB_MT312=m <BR>CONFIG_DVB_VES1820=m <BR>CONFIG_DVB_VES1X93=m <BR> <BR># <BR># Supported SAA7146 based PCI Adapters <BR># <BR>CONFIG_DVB_AV7110=m <BR>CONFIG_DVB_AV7110_OSD=y <BR>CONFIG_DVB_BUDGET=m <BR>CONFIG_DVB_BUDGET_CI=m <BR>CONFIG_DVB_BUDGET_AV=m <BR>CONFIG_DVB_BUDGET_PATCH=m <BR> <BR># <BR># Supported USB Adapters <BR># <BR>CONFIG_DVB_TTUSB_BUDGET=m <BR> <BR># <BR># Supported FlexCopII (B2C2) Adapters <BR># <BR>CONFIG_DVB_B2C2_SKYSTAR=m <BR>CONFIG_VIDEO_SAA7146=m <BR>CONFIG_VIDEO_SAA7146_VV=m <BR>CONFIG_VIDEO_VIDEOBUF=m <BR>CONFIG_VIDEO_BUF=m <BR># CONFIG_VIDEO_BTCX is not set <BR> <BR># <BR># Graphics support <BR># <BR>CONFIG_FB=y <BR># CONFIG_FB_CYBER2000 is not set <BR># CONFIG_FB_IMSTT is not set <BR>CONFIG_FB_VGA16=m <BR>CONFIG_FB_VESA=y <BR>CONFIG_VIDEO_SELECT=y <BR># CONFIG_FB_HGA is not set <BR># CONFIG_FB_RIVA is not set <BR># CONFIG_FB_I810 is not set <BR># CONFIG_FB_MATROX is not set <BR>CONFIG_FB_RADEON=m <BR>CONFIG_FB_ATY128=m <BR>CONFIG_FB_ATY=m <BR>CONFIG_FB_ATY_CT=y <BR>CONFIG_FB_ATY_GX=y <BR>CONFIG_FB_ATY_XL_INIT=y <BR># CONFIG_FB_SIS is not set <BR># CONFIG_FB_NEOMAGIC is not set <BR># CONFIG_FB_3DFX is not set <BR># CONFIG_FB_VOODOO1 is not set <BR># CONFIG_FB_TRIDENT is not set <BR># CONFIG_FB_VIRTUAL is not set <BR> <BR># <BR># Console display driver support <BR># <BR>CONFIG_VGA_CONSOLE=y <BR># CONFIG_MDA_CONSOLE is not set <BR>CONFIG_DUMMY_CONSOLE=y <BR>CONFIG_FRAMEBUFFER_CONSOLE=y <BR>CONFIG_PCI_CONSOLE=y <BR># CONFIG_FONTS is not set <BR>CONFIG_FONT_8x8=y <BR>CONFIG_FONT_8x16=y <BR> <BR># <BR># Logo configuration <BR># <BR>CONFIG_LOGO=y <BR># CONFIG_LOGO_LINUX_MONO is not set <BR>CONFIG_LOGO_LINUX_VGA16=y <BR>CONFIG_LOGO_LINUX_CLUT224=y <BR> <BR># <BR># Sound <BR># <BR>CONFIG_SOUND=y <BR> <BR># <BR># Advanced Linux Sound Architecture <BR># <BR>CONFIG_SND=y <BR>CONFIG_SND_SEQUENCER=m <BR>CONFIG_SND_SEQ_DUMMY=m <BR>CONFIG_SND_OSSEMUL=y <BR>CONFIG_SND_MIXER_OSS=m <BR>CONFIG_SND_PCM_OSS=m <BR>CONFIG_SND_SEQUENCER_OSS=y <BR>CONFIG_SND_RTCTIMER=m <BR># CONFIG_SND_VERBOSE_PRINTK is not set <BR># CONFIG_SND_DEBUG is not set <BR> <BR># <BR># Generic devices <BR># <BR>CONFIG_SND_DUMMY=m <BR>CONFIG_SND_VIRMIDI=m <BR>CONFIG_SND_MTPAV=m <BR>CONFIG_SND_SERIAL_U16550=m <BR>CONFIG_SND_MPU401=m <BR> <BR># <BR># ISA devices <BR># <BR># CONFIG_SND_AD1816A is not set <BR># CONFIG_SND_AD1848 is not set <BR># CONFIG_SND_CS4231 is not set <BR># CONFIG_SND_CS4232 is not set <BR># CONFIG_SND_CS4236 is not set <BR># CONFIG_SND_ES968 is not set <BR># CONFIG_SND_ES1688 is not set <BR># CONFIG_SND_ES18XX is not set <BR># CONFIG_SND_GUSCLASSIC is not set <BR># CONFIG_SND_GUSEXTREME is not set <BR># CONFIG_SND_GUSMAX is not set <BR># CONFIG_SND_INTERWAVE is not set <BR># CONFIG_SND_INTERWAVE_STB is not set <BR># CONFIG_SND_OPTI92X_AD1848 is not set <BR># CONFIG_SND_OPTI92X_CS4231 is not set <BR># CONFIG_SND_OPTI93X is not set <BR># CONFIG_SND_SB8 is not set <BR># CONFIG_SND_SB16 is not set <BR># CONFIG_SND_SBAWE is not set <BR># CONFIG_SND_WAVEFRONT is not set <BR># CONFIG_SND_ALS100 is not set <BR># CONFIG_SND_AZT2320 is not set <BR># CONFIG_SND_CMI8330 is not set <BR># CONFIG_SND_DT019X is not set <BR># CONFIG_SND_OPL3SA2 is not set <BR># CONFIG_SND_SGALAXY is not set <BR># CONFIG_SND_SSCAPE is not set <BR> <BR># <BR># PCI devices <BR># <BR># CONFIG_SND_ALI5451 is not set <BR># CONFIG_SND_AZT3328 is not set <BR># CONFIG_SND_CS46XX is not set <BR># CONFIG_SND_CS4281 is not set <BR># CONFIG_SND_EMU10K1 is not set <BR># CONFIG_SND_KORG1212 is not set <BR># CONFIG_SND_NM256 is not set <BR># CONFIG_SND_RME32 is not set <BR># CONFIG_SND_RME96 is not set <BR># CONFIG_SND_RME9652 is not set <BR># CONFIG_SND_HDSP is not set <BR># CONFIG_SND_TRIDENT is not set <BR># CONFIG_SND_YMFPCI is not set <BR># CONFIG_SND_ALS4000 is not set <BR># CONFIG_SND_CMIPCI is not set <BR># CONFIG_SND_ENS1370 is not set <BR># CONFIG_SND_ENS1371 is not set <BR># CONFIG_SND_ES1938 is not set <BR>CONFIG_SND_ES1968=y <BR>CONFIG_SND_MAESTRO3=m <BR># CONFIG_SND_FM801 is not set <BR># CONFIG_SND_ICE1712 is not set <BR># CONFIG_SND_ICE1724 is not set <BR># CONFIG_SND_INTEL8X0 is not set <BR># CONFIG_SND_SONICVIBES is not set <BR># CONFIG_SND_VIA82XX is not set <BR># CONFIG_SND_VX222 is not set <BR> <BR># <BR># ALSA USB devices <BR># <BR># CONFIG_SND_USB_AUDIO is not set <BR> <BR># <BR># PCMCIA devices <BR># <BR># CONFIG_SND_VXPOCKET is not set <BR># CONFIG_SND_VXP440 is not set <BR> <BR># <BR># Open Sound System <BR># <BR># CONFIG_SOUND_PRIME is not set <BR> <BR># <BR># USB support <BR># <BR>CONFIG_USB=y <BR># CONFIG_USB_DEBUG is not set <BR> <BR># <BR># Miscellaneous USB options <BR># <BR>CONFIG_USB_DEVICEFS=y <BR># CONFIG_USB_BANDWIDTH is not set <BR># CONFIG_USB_DYNAMIC_MINORS is not set <BR> <BR># <BR># USB Host Controller Drivers <BR># <BR>CONFIG_USB_EHCI_HCD=y <BR># CONFIG_USB_OHCI_HCD is not set <BR>CONFIG_USB_UHCI_HCD=y <BR> <BR># <BR># USB Device Class drivers <BR># <BR>CONFIG_USB_AUDIO=m <BR> <BR># <BR># USB Bluetooth TTY can only be used with disabled Bluetooth subsystem <BR># <BR>CONFIG_USB_MIDI=m <BR>CONFIG_USB_ACM=m <BR>CONFIG_USB_PRINTER=y <BR>CONFIG_USB_STORAGE=y <BR># CONFIG_USB_STORAGE_DEBUG is not set <BR># CONFIG_USB_STORAGE_DATAFAB is not set <BR># CONFIG_USB_STORAGE_FREECOM is not set <BR># CONFIG_USB_STORAGE_ISD200 is not set <BR># CONFIG_USB_STORAGE_DPCM is not set <BR>CONFIG_USB_STORAGE_HP8200e=y <BR># CONFIG_USB_STORAGE_SDDR09 is not set <BR># CONFIG_USB_STORAGE_SDDR55 is not set <BR># CONFIG_USB_STORAGE_JUMPSHOT is not set <BR> <BR># <BR># USB Human Interface Devices (HID) <BR># <BR>CONFIG_USB_HID=y <BR>CONFIG_USB_HIDINPUT=y <BR># CONFIG_HID_FF is not set <BR># CONFIG_USB_HIDDEV is not set <BR># CONFIG_USB_AIPTEK is not set <BR># CONFIG_USB_WACOM is not set <BR># CONFIG_USB_KBTAB is not set <BR># CONFIG_USB_POWERMATE is not set <BR># CONFIG_USB_XPAD is not set <BR> <BR># <BR># USB Imaging devices <BR># <BR>CONFIG_USB_MDC800=m <BR>CONFIG_USB_SCANNER=m <BR>CONFIG_USB_MICROTEK=m <BR># CONFIG_USB_HPUSBSCSI is not set <BR> <BR># <BR># USB Multimedia devices <BR># <BR># CONFIG_USB_DABUSB is not set <BR># CONFIG_USB_VICAM is not set <BR># CONFIG_USB_DSBR is not set <BR># CONFIG_USB_IBMCAM is not set <BR># CONFIG_USB_KONICAWC is not set <BR># CONFIG_USB_OV511 is not set <BR># CONFIG_USB_PWC is not set <BR># CONFIG_USB_SE401 is not set <BR># CONFIG_USB_STV680 is not set <BR> <BR># <BR># USB Network adaptors <BR># <BR># CONFIG_USB_CATC is not set <BR># CONFIG_USB_KAWETH is not set <BR># CONFIG_USB_PEGASUS is not set <BR># CONFIG_USB_RTL8150 is not set <BR># CONFIG_USB_USBNET is not set <BR> <BR># <BR># USB port drivers <BR># <BR># CONFIG_USB_USS720 is not set <BR> <BR># <BR># USB Serial Converter support <BR># <BR># CONFIG_USB_SERIAL is not set <BR> <BR># <BR># USB Miscellaneous drivers <BR># <BR># CONFIG_USB_EMI26 is not set <BR># CONFIG_USB_TIGL is not set <BR># CONFIG_USB_AUERSWALD is not set <BR># CONFIG_USB_RIO500 is not set <BR># CONFIG_USB_BRLVGER is not set <BR># CONFIG_USB_LCD is not set <BR># CONFIG_USB_TEST is not set <BR># CONFIG_USB_GADGET is not set <BR> <BR># <BR># File systems <BR># <BR>CONFIG_EXT2_FS=y <BR># CONFIG_EXT2_FS_XATTR is not set <BR>CONFIG_EXT3_FS=y <BR>CONFIG_EXT3_FS_XATTR=y <BR># CONFIG_EXT3_FS_POSIX_ACL is not set <BR># CONFIG_EXT3_FS_SECURITY is not set <BR>CONFIG_JBD=y <BR># CONFIG_JBD_DEBUG is not set <BR>CONFIG_FS_MBCACHE=y <BR># CONFIG_REISERFS_FS is not set <BR># CONFIG_JFS_FS is not set <BR># CONFIG_XFS_FS is not set <BR># CONFIG_MINIX_FS is not set <BR># CONFIG_ROMFS_FS is not set <BR>CONFIG_QUOTA=y <BR>CONFIG_QFMT_V1=m <BR>CONFIG_QFMT_V2=m <BR>CONFIG_QUOTACTL=y <BR>CONFIG_AUTOFS_FS=m <BR>CONFIG_AUTOFS4_FS=m <BR> <BR># <BR># CD-ROM/DVD Filesystems <BR># <BR>CONFIG_ISO9660_FS=y <BR>CONFIG_JOLIET=y <BR>CONFIG_ZISOFS=y <BR>CONFIG_ZISOFS_FS=y <BR>CONFIG_UDF_FS=m <BR> <BR># <BR># DOS/FAT/NT Filesystems <BR># <BR>CONFIG_FAT_FS=y <BR>CONFIG_MSDOS_FS=y <BR>CONFIG_VFAT_FS=y <BR>CONFIG_NTFS_FS=m <BR># CONFIG_NTFS_DEBUG is not set <BR>CONFIG_NTFS_RW=y <BR> <BR># <BR># Pseudo filesystems <BR># <BR>CONFIG_PROC_FS=y <BR>CONFIG_PROC_KCORE=y <BR># CONFIG_DEVFS_FS is not set <BR>CONFIG_DEVPTS_FS=y <BR># CONFIG_DEVPTS_FS_XATTR is not set <BR>CONFIG_TMPFS=y <BR># CONFIG_HUGETLBFS is not set <BR># CONFIG_HUGETLB_PAGE is not set <BR>CONFIG_RAMFS=y <BR> <BR># <BR># Miscellaneous filesystems <BR># <BR># CONFIG_ADFS_FS is not set <BR># CONFIG_AFFS_FS is not set <BR># CONFIG_HFS_FS is not set <BR># CONFIG_BEFS_FS is not set <BR># CONFIG_BFS_FS is not set <BR># CONFIG_EFS_FS is not set <BR># CONFIG_CRAMFS is not set <BR># CONFIG_VXFS_FS is not set <BR># CONFIG_HPFS_FS is not set <BR># CONFIG_QNX4FS_FS is not set <BR># CONFIG_SYSV_FS is not set <BR># CONFIG_UFS_FS is not set <BR> <BR># <BR># Network File Systems <BR># <BR>CONFIG_NFS_FS=m <BR>CONFIG_NFS_V3=y <BR>CONFIG_NFS_V4=y <BR>CONFIG_NFS_DIRECTIO=y <BR>CONFIG_NFSD=m <BR>CONFIG_NFSD_V3=y <BR>CONFIG_NFSD_V4=y <BR>CONFIG_NFSD_TCP=y <BR>CONFIG_LOCKD=m <BR>CONFIG_LOCKD_V4=y <BR>CONFIG_EXPORTFS=m <BR>CONFIG_SUNRPC=m <BR># CONFIG_SUNRPC_GSS is not set <BR>CONFIG_SMB_FS=m <BR>CONFIG_SMB_NLS_DEFAULT=y <BR>CONFIG_SMB_NLS_REMOTE="cp437" <BR>CONFIG_CIFS=m <BR># CONFIG_NCP_FS is not set <BR>CONFIG_CODA_FS=m <BR>CONFIG_CODA_FS_OLD_API=y <BR># CONFIG_INTERMEZZO_FS is not set <BR># CONFIG_AFS_FS is not set <BR> <BR># <BR># Partition Types <BR># <BR># CONFIG_PARTITION_ADVANCED is not set <BR>CONFIG_MSDOS_PARTITION=y <BR>CONFIG_SMB_NLS=y <BR>CONFIG_NLS=y <BR> <BR># <BR># Native Language Support <BR># <BR>CONFIG_NLS_DEFAULT="iso8859-1" <BR>CONFIG_NLS_CODEPAGE_437=y <BR># CONFIG_NLS_CODEPAGE_737 is not set <BR># CONFIG_NLS_CODEPAGE_775 is not set <BR>CONFIG_NLS_CODEPAGE_850=m <BR>CONFIG_NLS_CODEPAGE_852=m <BR># CONFIG_NLS_CODEPAGE_855 is not set <BR># CONFIG_NLS_CODEPAGE_857 is not set <BR># CONFIG_NLS_CODEPAGE_860 is not set <BR># CONFIG_NLS_CODEPAGE_861 is not set <BR># CONFIG_NLS_CODEPAGE_862 is not set <BR># CONFIG_NLS_CODEPAGE_863 is not set <BR># CONFIG_NLS_CODEPAGE_864 is not set <BR># CONFIG_NLS_CODEPAGE_865 is not set <BR># CONFIG_NLS_CODEPAGE_866 is not set <BR># CONFIG_NLS_CODEPAGE_869 is not set <BR># CONFIG_NLS_CODEPAGE_936 is not set <BR># CONFIG_NLS_CODEPAGE_950 is not set <BR># CONFIG_NLS_CODEPAGE_932 is not set <BR># CONFIG_NLS_CODEPAGE_949 is not set <BR># CONFIG_NLS_CODEPAGE_874 is not set <BR># CONFIG_NLS_ISO8859_8 is not set <BR># CONFIG_NLS_CODEPAGE_1250 is not set <BR># CONFIG_NLS_CODEPAGE_1251 is not set <BR>CONFIG_NLS_ISO8859_1=y <BR># CONFIG_NLS_ISO8859_2 is not set <BR># CONFIG_NLS_ISO8859_3 is not set <BR># CONFIG_NLS_ISO8859_4 is not set <BR># CONFIG_NLS_ISO8859_5 is not set <BR># CONFIG_NLS_ISO8859_6 is not set <BR># CONFIG_NLS_ISO8859_7 is not set <BR># CONFIG_NLS_ISO8859_9 is not set <BR># CONFIG_NLS_ISO8859_13 is not set <BR># CONFIG_NLS_ISO8859_14 is not set <BR>CONFIG_NLS_ISO8859_15=m <BR># CONFIG_NLS_KOI8_R is not set <BR># CONFIG_NLS_KOI8_U is not set <BR>CONFIG_NLS_UTF8=m <BR> <BR># <BR># Profiling support <BR># <BR># CONFIG_PROFILING is not set <BR> <BR># <BR># Kernel hacking <BR># <BR># CONFIG_DEBUG_KERNEL is not set <BR># CONFIG_DEBUG_SPINLOCK_SLEEP is not set <BR># CONFIG_FRAME_POINTER is not set <BR>CONFIG_X86_EXTRA_IRQS=y <BR>CONFIG_X86_FIND_SMP_CONFIG=y <BR>CONFIG_X86_MPPARSE=y <BR> <BR># <BR># Security options <BR># <BR># CONFIG_SECURITY is not set <BR> <BR># <BR># Cryptographic options <BR># <BR># CONFIG_CRYPTO is not set <BR> <BR># <BR># Library routines <BR># <BR>CONFIG_CRC32=m <BR>CONFIG_ZLIB_INFLATE=y <BR>CONFIG_ZLIB_DEFLATE=m <BR>CONFIG_X86_BIOS_REBOOT=y <BR>CONFIG_PC=y <BR> <BR>++++++++++++++++++++++++++++++++++++++++++++++++++++++++ <BR>/etc/lilo.conf con le sezioni per due kernel: <BR> <BR># LILO configuration file <BR># generated by ´liloconfig´ <BR># <BR># Start LILO global section <BR>append="hdb=ide-scsi" <BR>boot = /dev/fd0 <BR>#compact # faster, but won´t work on all systems. <BR>prompt <BR>timeout = 50 <BR>lba32 <BR>default = Linux-2.6.0 <BR># VESA framebuffer console @ 1024x768x256 <BR>vga = 773 <BR># Normal VGA console <BR># vga = normal <BR># VESA framebuffer console @ 1024x768x64k <BR># vga=791 <BR># VESA framebuffer console @ 1024x768x32k <BR># vga=790 <BR># VESA framebuffer console @ 1024x768x256 <BR># vga=773 <BR># VESA framebuffer console @ 800x600x64k <BR># vga=788 <BR># VESA framebuffer console @ 800x600x32k <BR># vga=787 <BR># VESA framebuffer console @ 800x600x256 <BR># vga=771 <BR># VESA framebuffer console @ 640x480x64k <BR># vga=785 <BR># VESA framebuffer console @ 640x480x32k <BR># vga=784 <BR># VESA framebuffer console @ 640x480x256 <BR># vga=769 <BR># ramdisk = 0 # paranoia setting <BR> <BR># LILO grafico by Tongiu <BR> <BR>bitmap=/boot/slackware.moon.bmp <BR> <BR>bmp-colors=6,,,,;2,,,, <BR>bmp-table=60,3,3,23, <BR>bmp-timer=66,28,6,8,0 <BR> <BR> <BR> <BR># End LILO global section <BR> <BR> <BR># Linux bootable partition config begins <BR>image = /boot/vmlinuz-ide-2.4.22 <BR> root = /dev/hda5 <BR> label = Linux-2.4.22 <BR> read-only # Non-UMSDOS filesystems should be mounted read-only for checking <BR> <BR>image = /boot/vmlinuz-2.6.0 <BR> root = /dev/hda5 <BR> label = Linux-2.6.0 <BR> read-only # Non-UMSDOS filesystems should be mounted read-only for checking <BR># Linux bootable partition config ends <BR> <BR># DOS bootable partition config begins <BR>other = /dev/hda1 <BR> label = Windows <BR> table = /dev/hda <BR># DOS bootable partition config ends <BR> <BR>Tongiu<br>
Tongiu
Linux 1.0
Linux 1.0
 
Messaggi: 99
Iscritto il: lun mag 12, 2003 23:00


Torna a Gnu/Linux in genere

Chi c’è in linea

Visitano il forum: Bing [Bot] e 4 ospiti