Vlc....i problemi non finiscono mai!!!!!!!!

Maria82 · Messaggio da **Maria82** » gio 7 lug 2005, 17:57

Ciao
sto cercando di fare lo streaming utilizzando vlc ma mi da dei problemi che vi posto sotto:

Se uso il comando open network stream, ottengo

[00000230] main private error: no sout mux module matched "ts"
[00000224] stream_out_standard private error: no suitable sout mux module for `udp/ts://172.17.10.50:1234'
[00000222] stream_out_duplicate private error: no destination given
[00000221] main stream output error: stream chained failed for `duplicate{dst=std{access=udp,mux=ts,url=172.17.10.50:1234}}'
[00000220] main input error: cannot start stream output instance, aborting

Se invece uso il wizard, ottengo

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.

Gdk-CRITICAL **: file gdkdraw.c: line 90 (gdk_draw_rectangle): assertion `gc !=NULL' failed.

Gdk-CRITICAL **: file gdkgc.c: line 689 (gdk_gc_set_clip_rectangle): assertion `gc != NULL' failed.
[00000228] main private error: no sout mux module matched "ts"
[00000222] stream_out_standard private error: no suitable sout mux module for `udp:/ts://172.17.10.50'
[00000221] main stream output error: stream chained failed for `standard{mux=ts,url=172.17.10.50,access=udp:}'
[00000220] main input error: cannot start stream output instance, aborting

Sapete indicarmi cosa non va?

Messaggio da **useless** » ven 8 lug 2005, 0:43

presumo problemi di compatibilità tra gdk/gtk e vlc. provato a ricompilare?

Maria82 · Messaggio da **Maria82** » ven 8 lug 2005, 11:37

ciao useless
Ho provato a ricompilare ma nessuna novità!
Ma in genere vlc da tutti questi problemi o sono io che lo ispiro...?

salbutamolo · Messaggio da **salbutamolo** » ven 8 lug 2005, 11:50

Ciao a tutti,

Maria82 ha scritto:ciao useless
Ho provato a ricompilare ma nessuna novità!
Ma in genere vlc da tutti questi problemi o sono io che lo ispiro...?

Bhè un po' rognosetto lo è, se non altro per le dipendenze da soddisfare che sono un po' tantine

Però dando un'occhiata al ./configure --help di vlc e selezionando poi le librerie che ci interessa usare disabilitando le altre le cose vanno a buon fine. Unico neo, io ho avuto problemi con l'ultima versione a far girare le skins2 mi andavano in continuazione in segmentation fault, infatti ho dowgradato alla penultima versione e ora tutto funge a meraviglia! Have a nice day,

Maria82 · Messaggio da **Maria82** » ven 8 lug 2005, 12:31

Io ho iniziato da poco la mia esperienza con linux....ma le dipendenze sono tutte quello ti ho messo tra asterischi nell'output di ./configure --help?

`configure' configures vlc 0.8.1 to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..']

Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]

By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc. You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data [PREFIX/share]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--infodir=DIR info documentation [PREFIX/info]
--mandir=DIR man documentation [PREFIX/man]

Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names

System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
--target=TARGET configure for building compilers for TARGET [HOST]

********************************************************************************************
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--disable-dependency-tracking Speeds up one-time builds
--enable-dependency-tracking Do not reject slow dependency extractors
--disable-rpath do not hardcode runtime library paths
--disable-nls do not use Native Language Support
--enable-utf8 unicode utf8 support (default enabled on darwin/beos/win32)
--enable-pth GNU Pth support (default disabled)
--enable-st State Threads (default disabled)
--enable-gprof gprof profiling (default disabled)
--enable-cprof cprof profiling (default disabled)
--enable-mostly-builtin most modules will be built-in (default disabled)
--disable-optimizations disable compiler optimizations (default enabled)
--disable-altivec disable AltiVec optimizations (default enabled on PPC)
--enable-debug debug mode (default disabled)
--enable-release activate extra optimizations (default disabled)
--enable-sout Stream output modules (default enabled)
--enable-httpd HTTP daemon (default enabled)
--enable-vlm VideoLAN manager (default enabled)
--enable-gnutls gnutls TLS/SSL support (default disabled)
--enable-livedotcom live.com input plugin (default disabled)
--enable-dvdread dvdread input module (default disabled)
--enable-dvdnav dvdnav input module (default enabled)
--enable-dshow Win32 DirectShow support (default enabled on Win32)
--enable-dvbpsi dvbpsi ts mux and demux module (default enabled)
--enable-v4l Video4Linux input support (default disabled)
--enable-pvr PVR cards access module (default disabled)
--enable-libcdio CDDA support via libcdio (default enabled)
--enable-libcddb CDDB support for CDDAX (default enabled)
--enable-cdda CDDA plugin support (default enabled)
--enable-cddax CDDAX plugin support (default enabled)
--enable-vcd VCD support for Linux, FreeBSD, MacOS X and Win32 (default enabled)
--enable-satellite satellite card support (default disabled)
--enable-dvb DVB-S/T/C card support (default disabled)
--enable-screen Screen capture support (default enabled)
--enable-ogg Ogg demux support (default enabled)
--enable-mkv Matroska demux support (default enabled)
--enable-mod Mod demux support (default enabled)
--enable-mad libmad module (default enabled)
--enable-ffmpeg ffmpeg codec (default enabled)
--enable-ffmpegaltivec ffmpegaltivec codec (DO NOT USE)
--enable-faad faad codec (default disabled)
--enable-toolame toolame codec (default disabled)
--enable-quicktime QuickTime module (default enabled on MacOS X)
--enable-a52 A/52 support with liba52 (default enabled)
--enable-dts DTS Coherent Acoustics support with libdts (default enabled)
--enable-flac flac decoder support (default disabled)
--enable-libmpeg2 libmpeg2 decoder support (default enabled)
--enable-vorbis Vorbis decoder support (default enabled)
--enable-tremor Tremor decoder support (default disabled)
--enable-speex Speex decoder support (default enabled)
--enable-tarkin experimental tarkin codec (default disabled)
--enable-theora experimental theora codec (default disabled)
--enable-x264 H264 encoding support with libx264 (default enabled)
--enable-cmml CMML support (default enabled)
--enable-x11 X11 support (default enabled)
--enable-xvideo XVideo support (default enabled)
--enable-glx X11 OpenGL (GLX) support (default enabled)
--enable-opengl OpenGL support (default enabled)
--enable-sdl SDL support (default enabled)
--enable-freetype freetype support (default enabled)
--enable-fribidi fribidi support (default enabled)
--enable-svg SVG support (default disabled)
--enable-qte QT Embedded support (default disabled)
--enable-hd1000v HD1000 Video Output module (default enabled on HD1000)
--enable-directx Win32 DirectX support (default enabled on Win32)
--enable-fb Linux framebuffer support (default enabled on Linux)
--enable-mga Linux kernel Matrox support (default disabled)
--enable-svgalib SVGAlib support (default disabled)
--enable-ggi GGI support (default disabled)
--enable-glide Glide (3dfx) support (default disabled)
--enable-aa aalib output (default disabled)
--enable-caca libcaca output (default disabled)
--enable-wingdi Win32 GDI module (default enabled on Win32)
--enable-oss Linux OSS /dev/dsp support (enabled on Linux)
--enable-esd Esound library support (default disabled)
--enable-portaudio Portaudio library support (default disabled)
--enable-arts aRts sound server (default disabled)
--enable-alsa ALSA sound support for Linux (default enabled)
--enable-waveout Win32 waveOut module (default enabled on Win32)
--enable-coreaudio CoreAudio module (default enabled on MacOS X)
--enable-hd1000a HD1000 audio module (default enabled on HD1000)
--enable-skins2 Skins2 interface module (experimental)
--enable-pda PDA interface needs Gtk2 support (default disabled)
--enable-wxwindows wxWindows support (default enabled)
--enable-opie Qt embedded interface support (default disabled)
--enable-macosx MacOS X support (default enabled on MacOS X)
--enable-qnx QNX RTOS support (default enabled on QNX RTOS)
--enable-ncurses ncurses interface support (default disabled)
--enable-xosd xosd interface support (default disabled)
--enable-visual visualisation plugin (default enabled)
--enable-galaktos OpenGL visualisation plugin (default disabled)
--enable-goom goom visualisation plugin (default disabled)
--enable-slp SLP service discovery support (default disabled)
--enable-lirc lirc support (default disabled)
--enable-joystick joystick control (default enabled)
--enable-corba corba interface support (default disabled)
--enable-mozilla build a vlc-based Mozilla plugin (default disabled)
--enable-testsuite build test modules (default disabled)
--disable-plugins make all plugins built-in (default plugins enabled)
*********************************************************************************************

Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-gnu-ld assume the C compiler uses GNU ld default=no
--with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib
--without-libiconv-prefix don't search for libiconv in includedir and libdir
--with-included-gettext use the GNU gettext library included here
--with-libintl-prefix=DIR search for libintl in DIR/include and DIR/lib
--without-libintl-prefix don't search for libintl in includedir and libdir

Optimization options:
--with-tuning=ARCH enable special tuning for an architecture
(default i686 on IA-32 and 750 on PPC)
Input plugins:
--with-livedotcom-tree=PATH live.com tree for static linking
--with-dvdread=PATH libdvdread headers and libraries
--with-dvdread-tree=PATH libdvdread tree for static linking
--with-dvdnav-config-path=PATH dvdnav-config path (default search in \$PATH)
--with-dvbpsi=PATH libdvbpsi headers and libraries
--with-dvbpsi-tree=PATH libdvbpsi tree for static linking
--with-v4l=PATH path to a v4l-enabled kernel tree
--with-dvb=PATH path to a dvb- and v4l2-enabled kernel tree
Codec plugins:
--with-mad=PATH path to libmad
--with-mad-tree=PATH mad tree for static linking
--with-ffmpeg-config-path=PATH ffmpeg-config path (default search in \$PATH)
--with-ffmpeg-mp3lame if ffmpeg has been compiled with mp3lame support
--with-ffmpeg-faac if ffmpeg has been compiled with faac support
--with-ffmpeg-dts if ffmpeg has been compiled with dts support
--with-ffmpeg-zlib if ffmpeg has been compiled with zlib support
--with-ffmpeg-tree=PATH ffmpeg tree for static linking
--with-faad-tree=PATH faad tree for static linking
--with-toolame-tree=PATH toolame tree for static linking
--with-a52=PATH a52 headers and libraries
--with-a52-tree=PATH a52dec tree for static linking
--with-dts-tree=PATH libdts tree for static linking
--with-libmpeg2-tree=PATH libmpeg2 tree for static linking
--with-tarkin-tree=PATH tarkin tree for static linking
--with-x264-tree=PATH x264 tree for static linking
Video plugins:
--with-sdl-config-path=PATH sdl-config path (default search in \$PATH)
--with-sdl-prefix=PATH path to libsdl (needed for cross-compiling),
e.g use as:
--with-sdl-prefix=/usr/local/arm/2.95.3/arm-linux/usr)
--with-freetype-config-path=PATH freetype-config path (default search in \$PATH)
--with-fribidi-config-path=PATH fribidi-config path (default search in \$PATH)
--with-qte=PATH Qt Embedded headers and libraries
--with-directx=PATH Win32 DirectX headers
--with-ggi=PATH path to libggi
--with-glide=PATH path to libglide
--with-caca-config-path=PATH caca-config path (default search in \$PATH)
Audio plugins:
Interface plugins:
--with-xml2-config-path=PATH xml2-config path (default search in \$PATH)
--with-wx-config-path=PATH wx-config path (default search in \$PATH)
--with-goom-tree=PATH goom tree for static linking (required)
--with-slp=PATH libslp headers and libraries
Misc options:
--with-libgnutls-prefix=PREFIX set prefix where libgnutls is installed
--with-words=endianness set endianness (big or little)
--with-mozilla-sdk-path=PATH path to win32 mozilla sdk

Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
headers in a nonstandard directory <include dir>
CPP C preprocessor
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

Messaggio da **useless** » ven 8 lug 2005, 12:47

sono tutte quelle che hanno un --enable-antani (e di conseguenza un --disable-antani). alcune (la maggior parte in questo caso) sono obbligatorie, altre facoltative. a volte servono anche delle versioni particolari, x cui ti rimando alla pagina dei download sul sitio di vlc. purtroppo non so come aiutarti + di così.
che versione hai di wxwindows? ieri ho compilato linkando alla 2.6.

ps: anche io ho il segmentation fault quando attivo skins2.

Maria82 · Messaggio da **Maria82** » ven 8 lug 2005, 13:06

Grazie....
La versione è wxGTK-2.4.2-i686-1ht.tgz.
Per quanto riguarda la skin2, lanciandola a me da Killed.
Non funziona a nessuno!!!!!!

salbutamolo · Messaggio da **salbutamolo** » ven 8 lug 2005, 13:08

Ciao a tutti,

anche io ho il segmentation fault quando attivo skins2

Io ce l'ho solo con la versione 0.82, che mi pare sia l'ultima, con la 0.81 tutto va a cannone! Attenzione che per usare vlc con le skins2 bisogna lanciare "vlc -I skins2".
Have a nice day

marika82 · Messaggio da **marika82** » ven 8 lug 2005, 15:34

Ho risolto....
Da videoLan mi hanno suggerito di installare un altra libreria: libdvbpsi.
L'ho scaricata come pacchetto da linuxpackages e ho ricompilato vlc.
Ora mi fa lo streaming!!!
Grazie comunque a tutti

.