nn si avvia kde

[ter2]

Con i driver intel ottengo diversi errori...

usando i driver VGA a 8bit ottengo un

AIGLX: DRI module not loaded

e poi problemi con la tastiera riguardo xkbcomp

ricordo che c'è un comando per indirizzare l'output di un comando su un file di testo, qualcosa tipo

startx | cat nome_file

Se mi dite il comando vi posto l'output completo!!!

[conraid]

usando i driver VGA a 8bit ottengo un

AIGLX: DRI module not loaded

e poi problemi con la tastiera riguardo xkbcomp
!

Devi configurare il file /etc/X11/xorg.conf

Purtroppo, o per fortuna per alcuni compreso me, spesso bisogna mettere mano direttamente ai file di configurazione.

Posta il tuo xorg.conf che lo sistemiamo per andare con vesa, e poi fai le prove. Sempre leggendo la documentazione e modificando il file di configurazione.

Solo così potrai raggiungere lo Slack

[nuitari]

il file di log viene scritto automaticamente in /var/log/Xorg.0.log

[ter2]

e' un po' lunghetto, ve lo posto qua stesso:

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# RgbPath "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/Type1/"
FontPath "/usr/lib/X11/fonts/TTF/"
FontPath "/usr/lib/X11/fonts/OTF/"
FontPath "/usr/lib/X11/fonts/cyrillic/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "it"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

Option "ZAxisMapping" "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.5

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-70

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
Identifier "* Generic VGA compatible"
Driver "vga"
#VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "* Generic VGA compatible"
Monitor "My Monitor"
DefaultDepth 8

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
# Mode 0666
# EndSection

Ecco qua... aspetto notizie!!!

[conraid]

e' un po' lunghetto

Ma anche incasinato

# Load "dri"

Vedi quell'errore
AIGLX: DRI module not loaded
e lasci il commento?

fai un xorg.conf così

Codice: Seleziona tutto

Section "Module"
	Load "dbe"
	SubSection "extmod"
	Option "omit xfree86-dga" # don't initialise the DGA extension
	EndSubSection
	Load "type1"
	Load "freetype"
	Load "glx"
	Load "dri"
EndSection

Section "Files"
	FontPath "/usr/share/fonts/TTF"
	FontPath "/usr/share/fonts/OTF"
	FontPath "/usr/share/fonts/Type1"
	FontPath "/usr/share/fonts/misc"
	FontPath "/usr/share/fonts/75dpi/:unscaled"
	ModulePath "/usr/lib/xorg/modules"
EndSection

Section "InputDevice"
	Identifier "Keyboard1"
	Driver "kbd"
	Option "XkbRules" "xorg"
	Option "XkbModel" "pc101"
	Option "XkbLayout" "it"
EndSection


Section "InputDevice"
	Identifier "Mouse1"
	Driver "mouse"
	Option "Protocol" "Auto"
	Option "Device" "/dev/input/mice"
	Option "ZAxisMapping" "4 5 6 7"
EndSection


Section "Monitor"
	Identifier "My Monitor"
	HorizSync 31.5
	VertRefresh 50-70
EndSection


Section "Device"
	Identifier "VESA Framebuffer"
	Driver "vesa"
EndSection


Section "Screen"
	Identifier "Screen 1"
	Device "VESA Framebuffer"
	Monitor "My Monitor"
	DefaultDepth 24

	Subsection "Display"
	Depth 8
	Modes "1280x1024" "1024x768" "800x600" "640x480"
	ViewPort 0 0
	EndSubsection
	Subsection "Display"
	Depth 16
	Modes "1280x1024" "1024x768" "800x600" "640x480"
	ViewPort 0 0
	EndSubsection
	Subsection "Display"
	Depth 24
	Modes "1280x1024" "1024x768" "800x600" "640x480"
	ViewPort 0 0
	EndSubsection
EndSection


Section "ServerLayout"
	Identifier "Simple Layout"
	Screen "Screen 1" 0 0
	InputDevice "Mouse1" "CorePointer"
	InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "DRI"
Mode 0666
EndSection 

E guarda cosa fa?

P.S.
Per gli altri utenti, l'ho scritto velocemente se notate errori segnalateli

[ter2]

Vedi quell'errore
AIGLX: DRI module not loaded
e lasci il commento?

A dir la verità, abituato a windows, sono sempre reticente a modificare le configurazioni a mano... mi sa che mi ci dovrò abituare....

comunque, scritto il file e lanciato startx ottengo:

(WW) VESA(0): Failed to set up write-combining range (0xe9800000,0x7d0000)
(WW) VESA(0): Failed to set up write-combining range (0xe9000000,0xfd0000)
(WW) VESA(0): Failed to set up write-combining range (0xe8000000,0x1fd0000)
(EE) AIGLX: Screen 0 is not dri capable
The XKEYBOARD keymap compiler (xkbcomp) reports:
>Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server

Fatal server error:
could not open default font 'fixed'
giving up.
xinit: Connection reset by peer (errno 104): unable to connect to X sever
xinit: No such process (errno 3): Serve error.

e questo è quanto..... in più però, rispetto alle altre volte, ho visto lo sfarfallio delo schermo con colori viola

[conraid]

Ok, ora prova così

Codice: Seleziona tutto

Section "ServerLayout"
   Identifier "Simple Layout"
   Screen "Screen 1" 0 0
   InputDevice "Mouse1" "CorePointer"
   InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "Module"
   Load "dbe"
   SubSection "extmod"
   Option "omit xfree86-dga" # don't initialise the DGA extension
   EndSubSection
   Load "type1"
   Load "freetype"
EndSection

Section "Files"
    RgbPath         "/usr/share/X11/rgb"
    ModulePath      "/usr/lib/xorg/modules"
    FontPath        "/usr/share/fonts/misc/"
    FontPath        "/usr/share/fonts/TTF/"
    FontPath        "/usr/share/fonts/OTF/"
    FontPath        "/usr/share/fonts/Type1/"
    FontPath        "/usr/share/fonts/100dp/i"
    FontPath        "/usr/share/fonts/75dpi/"
EndSection

Section "InputDevice"
   Identifier "Keyboard1"
    Driver         "kbd"
    Option         "XkbLayout" "it"
EndSection

Section "InputDevice"
   Identifier "Mouse1"
   Driver "mouse"
   Option "Protocol" "Auto"
   Option "Device" "/dev/input/mice"
   Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
   Identifier "My Monitor"
   HorizSync 31.5
   VertRefresh 50-70
EndSection


Section "Device"
   Identifier "VESA Framebuffer"
   Driver "vesa"
EndSection


Section "Screen"
   Identifier "Screen 1"
   Device "VESA Framebuffer"
   Monitor "My Monitor"
   DefaultDepth 24

   Subsection "Display"
   Depth 8
   Modes "1024x768" "800x600" "640x480"
   EndSubsection
   Subsection "Display"
   Depth 16
   Modes "1024x768" "800x600" "640x480"
   EndSubsection
   Subsection "Display"
   Depth 24
   Modes "1024x768" "800x600" "640x480"
   EndSubsection
EndSection

comunque si, devi abituarti a modificare tutto a mano.
E' il bello di usare "veri" sistemi operativi

Ma che computer hai?

UPDATE
ho visto che un portatile toshiba, sistemiamo anche la tastiera con calma

La risoluzione l'ho cambiata quindi a 1024

Guarda questo link se non l'hai già visto, e fai delle prove con quel file xorg, senza paura di modificare a mano le cose. Sopratutto per tastiera e touchpad, che io non ho messo.
Prima salvati quelli vecchi in qualche modo

http://gentoo-wiki.com/HARDWARE_Toshiba ... te_A30-303

Richiede i driver synaptics, aspetta qualcuno sul forum che li ha installati io non ho esperienza

Prima prova con i driver vesa comunque, poi passa all'intel

[ter2]

Ho modificato il file, ed è tutto uguale tranne che nn compare più la riga relativa all'errore di AIGLX...

Adesso comunque provo un pò col il link che mi hai dato, vediamo se risolvo con quello!!!


comunque grazie dell'aiuto!!!

[conraid]

Ho modificato il file, ed è tutto uguale tranne che nn compare più la riga relativa all'errore di AIGLX...

Adesso comunque provo un pò col il link che mi hai dato, vediamo se risolvo con quello!!!


comunque grazie dell'aiuto!!!

Da quel che vedo hai reinstallato tutti i pacchetto dentro x/ vero?
Prova a fare nuovamente

Codice: Seleziona tutto

#upgradepkg --reinstall x/font-misc-misc*.tgz

o ancora meglio

Codice: Seleziona tutto

#removepkg font-misc-misc
#installpkg font-misc-misc*.tgz

Dove x/font-etc... è il pacchetto nel CD della Slack12

L'alias fixed è in quel pacchetto

[ter2]

dopo lo proverò... adesso devo sbrigare alcune cose...

Vi farò sapere appena provo!!!!


Ancora grazie!!!

[nuitari]

dovrai abituartici si, soprattutto su Slackware.. a parte che questi problemi te li evitavi tutti se facevi un installazione full come consigliato dall'installer. Per esperienza personale comunque su Slackware lo sbattimento è tutto iniziale. Una volta che ti sei configurato la distro come si deve, poi semplicemente la usi.

L'errore è sicuramente derivante dai font o dai percorsi sui font, come si evince dall'errore

Fatal server error:
could not open default font 'fixed'
giving up.

Basta leggere =) segui il consiglio di conraid ed andrà tutto bene.
Mi permetto di aggiungere che l'ideale sarebbe, dopo aver installato i font, rieseguire gli script di creazione della cache. Lo puoi fare in comodità tramite pkgtool (Setup -> mkfontdir e fontconfig)

[ter2]

bhe, ho acceso il pc per fare i tentativi di cui mi avete scritto, e il pc mi ha accolto con un graziosissimo:

You will be dead within a year.

Veramente incoraggiante!!!!

Addesso provo e vi dico!!!

[conraid]

You will be dead within a year.

Pensa a che fortune

[ter2]

Allora, qualcosa è cambiato....

ho visto lo schermo del kde, ma era molto disturbato, tanto che stavo per stacare la corrente, temendo che lo schermo si danneggiasse....
Poi ho incominciato ad intravedere il desktop, allora sono riuscito a terminare la sessione di kde. Al ritorno in modalità testo c'erano una serie di errori più o meno tutti uguali:

X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor Opcode: 0
Resource id: 0xa00005

Pensate che se rifaccio l'installazione d'accapo senza escludere nulla la cosa si risolva? o almeno migliori??

comunque, mi sa che ci siamo quasi...
Adesso provo a mettere lo xorg.conf trovato al sito indicatomi da Conraid...
Vediamo che succede!!!

[ter2]

EUREKA!!!!!

Vi scrivo dalla macchina incriminata.....

Ho usato il file xorg.conf fornito nel link di conraid, senza mettere i riferimenti ai driver synaptic di cui si parla lì!!!

il touch pad funziona, e anche tutto il resto sembra andare...

adesso devo cercare di settare il tutto al meglio, tipo accellerazione grafica ecc...

ma lo si fa con più calma!!!!

P.S.: vi posto il file xorg.conf che ne è risultato, magari notate qualcosa da sistemare meglio:

ection "Module"
Load "dbe"
Load "glx"
Load "extmod"
Load "xtrap"
Load "type1"
Load "freetype"
Load "record"
Load "dri"
EndSection

Section "Files"
RgbPath "/usr/share/X11/rgb"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/CID"
ModulePath "/usr/lib/xorg/modules"
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol1" "Auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "My Monitor"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "true"
EndSection

Section "Device"
Identifier "Card0"
Driver "i810"
VendorName "Intel Corporation"
BoardName "82852/855GM Integrated Graphics Device"
BusID "PCI:0:2:0"
Option "DynamicClocks" "on"
EndSection

Section "Screen"
Identifier "Screen 1"
Device "Card0"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
ViewPort 0 0
Depth 1
EndSubSection
SubSection "Display"
ViewPort 0 0
Depth 4
EndSubSection
SubSection "Display"
ViewPort 0 0
Depth 8
EndSubSection
SubSection "Display"
ViewPort 0 0
Depth 15
EndSubSection
SubSection "Display"
ViewPort 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
ViewPort 0 0
Modes "1024x768" "800x600" "640x480"
Depth 24
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Simple Layout"
Screen 0 "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "StandbyTime" "5"
EndSection

Magari potrebbe anche servire a qualc'uno!!!

Grazie a tutti per l'aiuto, a breve vi posto altri dubbi