[Risolto]Problema riconoscimento scheda wifi
Moderatore: Staff
Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
-
Toxoz
- Linux 1.x
- Messaggi: 140
- Iscritto il: mer 9 set 2009, 13:28
- Nome Cognome: Antonio Sciuto
- Distribuzione: Fedora 14
- Località: Catania,Sicilia
Re: Problema riconoscimento scheda wifi
So Breier I copied the unpacked file b43 in the root /lib/firmware but nothing appened! Explain me where I must copy the folder....
-
Breier
- Linux 0.x
- Messaggi: 40
- Iscritto il: dom 13 set 2009, 5:56
- Slackware: 13.0
- Kernel: 2.6.31.1
- Desktop: Xfce-4.6
- Distribuzione: Slackware64
- Località: Brazil
- Contatta:
Re: Problema riconoscimento scheda wifi
OK:
1: You've copied the folder b43 to the right place;
2: You've restarted your system;
3: Check if the module b43 is loaded `lsmod | grep b43` and if it's not, `modprobe b43`;
4: Check if now your board is listed in `iwconfig`;
If after this, it still doesn't work I would recompile the entire kernel...
1: You've copied the folder b43 to the right place;
2: You've restarted your system;
3: Check if the module b43 is loaded `lsmod | grep b43` and if it's not, `modprobe b43`;
4: Check if now your board is listed in `iwconfig`;
If after this, it still doesn't work I would recompile the entire kernel...
-
414N
- Iper Master
- Messaggi: 2924
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Problema riconoscimento scheda wifi
Hai rimosso ndiswrapper?
-
Toxoz
- Linux 1.x
- Messaggi: 140
- Iscritto il: mer 9 set 2009, 13:28
- Nome Cognome: Antonio Sciuto
- Distribuzione: Fedora 14
- Località: Catania,Sicilia
Re: Problema riconoscimento scheda wifi
Si ho rimosso ndiswrapper ... si ho seguito la procedura di Brier .... mi sa che mi conviene ricompilare il kernel ... meglio mettere il 2.6.31 che avevo già compilato (male) ed installato o ricompilare il kernel base di slackware??
-
Breier
- Linux 0.x
- Messaggi: 40
- Iscritto il: dom 13 set 2009, 5:56
- Slackware: 13.0
- Kernel: 2.6.31.1
- Desktop: Xfce-4.6
- Distribuzione: Slackware64
- Località: Brazil
- Contatta:
Re: Problema riconoscimento scheda wifi
If you still have ndiswrapper module it will interfers on kernel nativo module. On my procedure you have to remove ndiswrapper.
I recomend you to instal the kernel-huge-smp from slackware-13 dvd. But if it's not working, your problem should be more complex.
good luck
I recomend you to instal the kernel-huge-smp from slackware-13 dvd. But if it's not working, your problem should be more complex.
good luck
-
Toxoz
- Linux 1.x
- Messaggi: 140
- Iscritto il: mer 9 set 2009, 13:28
- Nome Cognome: Antonio Sciuto
- Distribuzione: Fedora 14
- Località: Catania,Sicilia
Re: Problema riconoscimento scheda wifi
Scuse me Brier if I didn't say that I'm already using the kernel-huge-smp cause I installed all the Slackware-DVD's softwares......! And for the last time .... yes I uninstalled ndiswrapper,so its driver did not interpose your suggested procedure... so I think that I'll recompile the 2.6.31 kernel! Do you think that will work with my Broadcom this time?
-
414N
- Iper Master
- Messaggi: 2924
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Problema riconoscimento scheda wifi
Riporta l'output di dmesg, magari c'è qualche messaggio utile.
Mi raccomando [-o< [-o< [-o< [-o< , tra tag code
Mi raccomando [-o< [-o< [-o< [-o< , tra tag code
-
Toxoz
- Linux 1.x
- Messaggi: 140
- Iscritto il: mer 9 set 2009, 13:28
- Nome Cognome: Antonio Sciuto
- Distribuzione: Fedora 14
- Località: Catania,Sicilia
Re: Problema riconoscimento scheda wifi
Codice: Seleziona tutto
root@Terminal:~# dmegs
bash: dmegs: command not found
root@Terminal:~# dmesg
0 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f7b0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007f7b0
On node 0 totalpages: 522063
free_area_init_node: node 0, pgdat c09da700, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2304 pages used for memmap
HighMem zone: 292530 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 40960 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517983
Kernel command line: BOOT_IMAGE=Linux ro root=801 vt.default_utf8=0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1995.030 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2059648k/2088640k available (6817k kernel code, 27716k reserved, 2484k data, 456k init, 1179336k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0a22000 - 0xc0a94000 ( 456 kB)
.data : 0xc07a8437 - 0xc0a15520 (2484 kB)
.text : 0xc0100000 - 0xc07a8437 (6817 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.06 BogoMIPS (lpj=1995030)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU 550 @ 2.00GHz stepping 01
Brought up 1 CPUs
Total of 1 processors activated (3990.06 BogoMIPS).
net_namespace: 956 bytes
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 7200.000 MB/sec
xor: using function: pIII_sse (7200.000 MB/sec)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [C003] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xe4400000-0xe44fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0x4000-0x4007]
pci 0000:00:02.1: reg 10 64bit mmio: [0xe4500000-0xe45fffff]
pci 0000:00:19.0: reg 10 32bit mmio: [0xe4600000-0xe461ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xe4620000-0xe4620fff]
pci 0000:00:19.0: reg 18 io port: [0x4020-0x403f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x4040-0x405f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xe4621000-0xe46213ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4624000-0xe4627fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x4060-0x407f]
pci 0000:00:1d.1: reg 20 io port: [0x4080-0x409f]
pci 0000:00:1d.2: reg 20 io port: [0x40a0-0x40bf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4628000-0xe46283ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x40c0-0x40cf]
pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7]
pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7]
pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377]
pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577]
pci 0000:00:1f.2: reg 20 io port: [0x4100-0x411f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xe4629000-0xe46297ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:10:00.0: reg 10 64bit mmio: [0xe4000000-0xe4003fff]
pci 0000:10:00.0: supports D1 D2
pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe40fffff]
pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C135._PRT]
ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
ACPI: PCI Interrupt Link [C130] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C131] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
ACPI: PCI Interrupt Link [C142] (IRQs *10 11)
ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *5
ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20081204]
ACPI: Power Resource [C29B] (on)
ACPI: Power Resource [C1C6] (off)
ACPI: Power Resource [C3B2] (off)
ACPI: Power Resource [C3B3] (off)
ACPI: Power Resource [C3B4] (off)
ACPI: Power Resource [C3B5] (off)
ACPI: Power Resource [C3B6] (off)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved
system 00:09: ioport range 0x500-0x57f has been reserved
system 00:09: ioport range 0x800-0x80f has been reserved
system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x1000-0x107f has been reserved
system 00:0a: ioport range 0x1100-0x113f has been reserved
system 00:0a: ioport range 0x1200-0x121f has been reserved
system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0a: iomem range 0xfec00000-0xfec000ff has been reserved
system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xfed90000-0xfed99fff has been reserved
system 00:0b: iomem range 0xcee00-0xcffff has been reserved
system 00:0b: iomem range 0xd2000-0xd3fff has been reserved
system 00:0b: iomem range 0xfeda0000-0xfedbffff has been reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xe4000000-0xe40fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
pci 0000:00:1c.4: IO window: 0x2000-0x3fff
pci 0000:00:1c.4: MEM window: 0xe0000000-0xe3ffffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:08: resource 0 mem: [0x0-0x0]
pci_bus 0000:08: resource 1 mem: [0x0-0x0]
pci_bus 0000:08: resource 2 mem: [0x0-0x0]
pci_bus 0000:08: resource 3 mem: [0x0-0x0]
pci_bus 0000:10: resource 0 mem: [0x0-0x0]
pci_bus 0000:10: resource 1 mem: [0xe4000000-0xe40fffff]
pci_bus 0000:10: resource 2 mem: [0x0-0x0]
pci_bus 0000:10: resource 3 mem: [0x0-0x0]
pci_bus 0000:28: resource 0 io: [0x2000-0x3fff]
pci_bus 0000:28: resource 1 mem: [0xe0000000-0xe3ffffff]
pci_bus 0000:28: resource 2 mem: [0x0-0x0]
pci_bus 0000:28: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 mem: [0x0-0x0]
pci_bus 0000:02: resource 1 mem: [0x0-0x0]
pci_bus 0000:02: resource 2 mem: [0x0-0x0]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Aug 17 2009 00:51:32) installed
msgmni has been set to 1721
alg: No test for cipher_null (cipher_null-generic)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xd0000000, mapped to 0xf8580000, using 1536k, total 7616k
vesafb: mode is 1024x768x8, linelength=1024, pages=8
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03)
pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x40c0-0x40c7
Probing IDE interface ide0...
-
Toxoz
- Linux 1.x
- Messaggi: 140
- Iscritto il: mer 9 set 2009, 13:28
- Nome Cognome: Antonio Sciuto
- Distribuzione: Fedora 14
- Località: Catania,Sicilia
Re: Problema riconoscimento scheda wifi
Codice: Seleziona tutto
hda: TSSTcorp CDDVDW TS-L632N, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
fcoe_transport_register:fcoesw
Adaptec aacraid driver 1.1-5[2456]-ms
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.03.00-k4
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.0
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629180 irq 27
ata3: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629200 irq 27
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-8: TOSHIBA MK1652GSX, LV011C, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1652GS LV01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4621000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.6-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4628000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.6-smp ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004040
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.6-smp uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.6-smp uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.29.6-smp uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.1
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.29.6-smp uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.2
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 828 MB/s
raid6: int32x2 792 MB/s
raid6: int32x4 660 MB/s
raid6: int32x8 570 MB/s
raid6: mmxx1 2554 MB/s
raid6: mmxx2 2949 MB/s
raid6: sse1x1 1601 MB/s
raid6: sse1x2 2171 MB/s
raid6: sse2x1 3066 MB/s
raid6: sse2x2 3445 MB/s
raid6: using algorithm sse2x2 (3445 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: sda1: couldn't mount because of unsupported optional features (240).
EXT2-fs: sda1: couldn't mount because of unsupported optional features (244).
EXT4-fs: INFO: recovery required on readonly filesystem.
EXT4-fs: write access will be enabled during recovery.
EXT4-fs: barriers enabled
usb 2-2: new high speed USB device using ehci_hcd and address 2
usb 2-2: New USB device found, idVendor=05ac, idProduct=1293
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: iPod
usb 2-2: Manufacturer: Apple Inc.
usb 2-2: SerialNumber: 6d350d2dc7ce1a9b07989e3d48282692afe28e61
usb 2-2: configuration #1 chosen from 3 choices
usb 5-1: new low speed USB device using uhci_hcd and address 2
kjournald2 starting: pid 1434, dev sda1:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: recovery complete.
EXT4-fs: mounted filesystem sda1 with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 456k freed
usb 5-1: New USB device found, idVendor=13ee, idProduct=0003
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Optical Mouse
usb 5-1: Manufacturer: MosArt
usb 5-1: configuration #1 chosen from 1 choice
input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:13EE:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1d.1-1/input0
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
Linux agpgart interface v0.103
sd 2:0:0:0: Attached scsi generic sg0 type 0
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:22:64:6a:ad:23
0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
0000:00:19.0: eth0: MAC: 5, PHY: 7, PBA No: ffffff-0ff
agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button (CM) [C2B4]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [C154]
ACPI: AC Adapter [C23A] (on-line)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
acpi device:02: registered as cooling_device1
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
ACPI: Video Device [C099] (multi-head: yes rom: no post: no)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ3] (32 C)
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ACPI: Battery Slot [C23B] (battery present)
ACPI: WMI: Mapper loaded
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ4] (29 C)
thermal LNXTHERM:03: registered as thermal_zone2
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
ACPI: Thermal Zone [TZ5] (38 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [TZ0] (36 C)
thermal LNXTHERM:05: registered as thermal_zone4
ACPI: Thermal Zone [TZ1] (40 C)
fan PNP0C0B:00: registered as cooling_device2
ACPI: Fan [C3B7] (off)
fan PNP0C0B:01: registered as cooling_device3
ACPI: Fan [C3B8] (off)
fan PNP0C0B:02: registered as cooling_device4
ACPI: Fan [C3B9] (off)
fan PNP0C0B:03: registered as cooling_device5
ACPI: Fan [C3BA] (off)
fan PNP0C0B:04: registered as cooling_device6
ACPI: Fan [C3BB] (on)
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x200000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
Marking TSC unstable due to TSC halts in idle
fuse init (API version 7.11)
EXT4 FS on sda1, internal journal on sda1:8
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
powernow: This module only works with AMD K7 CPUs
cpufreq: No nForce2 chipset.
Clocksource tsc unstable (delta = -486535612 ns)
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.6 (interface 0x000e0000).
eth0: no IPv6 routers present
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
i2c_algo_bit: exports duplicate symbol i2c_bit_add_numbered_bus (owned by kernel)
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.0: irq 29 for MSI/MSI-X
[drm] Initialized i915 1.6.0 20080730 on minor 0
root@Terminal:~#
-
Toxoz
- Linux 1.x
- Messaggi: 140
- Iscritto il: mer 9 set 2009, 13:28
- Nome Cognome: Antonio Sciuto
- Distribuzione: Fedora 14
- Località: Catania,Sicilia
Re: Problema riconoscimento scheda wifi
Scusate ma per via della lunghezza massima di un testo ho dovuto necessariamente dividere in due parti il codice! 
-
414N
- Iper Master
- Messaggi: 2924
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Problema riconoscimento scheda wifi
Il module b43 non viene caricato in automatico all'avvio.
Caricalo con "modprobe b43" e poi prova di andare con iwconfig.
Caricalo con "modprobe b43" e poi prova di andare con iwconfig.
-
Toxoz
- Linux 1.x
- Messaggi: 140
- Iscritto il: mer 9 set 2009, 13:28
- Nome Cognome: Antonio Sciuto
- Distribuzione: Fedora 14
- Località: Catania,Sicilia
Re: Problema riconoscimento scheda wifi
purtroppo anche dando il comando modprobe b43 non succede niente! 
-
Breier
- Linux 0.x
- Messaggi: 40
- Iscritto il: dom 13 set 2009, 5:56
- Slackware: 13.0
- Kernel: 2.6.31.1
- Desktop: Xfce-4.6
- Distribuzione: Slackware64
- Località: Brazil
- Contatta:
Re: Problema riconoscimento scheda wifi
It's weird to have nothing about your Broadcom in dmesg. And since you tried all I said and no success I suggest you to give up with my suggestions :P and try what all the others are saing.
For now I lost my inspiration
For now I lost my inspiration
-
414N
- Iper Master
- Messaggi: 2924
- Iscritto il: mer 13 feb 2008, 16:19
- Slackware: 15.0
- Kernel: 5.15.19
- Desktop: KDE5
- Località: Bulagna
- Contatta:
Re: Problema riconoscimento scheda wifi
Se non succede niente (manco un messaggio su console) allora vuol dire che viene caricato correttamente.Toxoz ha scritto:purtroppo anche dando il comando modprobe b43 non succede niente!
Dopo averlo lanciato, guarda con
Codice: Seleziona tutto
lsmod | grep b43Se hai installato il firmware correttamente, ora la tua scheda wireless dovrebbe comparire, sia in
Codice: Seleziona tutto
ifconfig -aCodice: Seleziona tutto
iwconfig-
Toxoz
- Linux 1.x
- Messaggi: 140
- Iscritto il: mer 9 set 2009, 13:28
- Nome Cognome: Antonio Sciuto
- Distribuzione: Fedora 14
- Località: Catania,Sicilia
Re: Problema riconoscimento scheda wifi
Codice: Seleziona tutto
root@Terminal:~# lsmod | grep b43
b43 127576 0
ssb 38848 1 b43
rfkill 9296 1 b43
mac80211 155588 1 b43
cfg80211 36468 2 b43,mac80211
led_class 3392 1 b43
input_polldev 3108 1 b43
pcmcia 33772 2 b43,ssb
pcmcia_core 32016 3 b43,ssb,pcmcia
root@Terminal:~#
Codice: Seleziona tutto
:~# lsmod | grep b43