stavo per spararmi quando improvvisamente...

[ferenkileen]

questa è la sezione incriminata senza modifiche:
<BR>
<BR># **********************************************************************
<BR># Core Pointer´s InputDevice section
<BR># **********************************************************************
<BR>
<BR>Section "InputDevice"
<BR>
<BR># Identifier and driver
<BR>
<BR> Identifier "Mouse1"
<BR> Driver "mouse"
<BR> (da quanto credo le altre opzioni le devo inserire qui sotto giusto?)
<BR>
<BR># On platforms where PnP mouse detection is supported the following
<BR># protocol setting can be used when using a newer PnP mouse:
<BR>
<BR># Option "Protocol" "Auto"
<BR>
<BR># The available mouse protocols types that you can set below are:
<BR># Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
<BR># Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
<BR># MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
<BR># ThinkingMouse ThinkingMousePS/2 Xqueue
<BR> Option "Protocol" "PS/2"
<BR>
<BR># The mouse device. The device is normally set to /dev/mouse,
<BR># which is usually a symbolic link to the real device.
<BR>
<BR> Option "Device" "/dev/mouse"
<BR># Option "Device" "/dev/psaux"
<BR># Option "Device" "/dev/ttyS0"
<BR># Option "Device" "/dev/ttyS1"
<BR>
<BR># When using XQUEUE, comment out the above two lines, and uncomment
<BR># the following line.
<BR>
<BR># Option "Protocol" "Xqueue"
<BR>
<BR># Baudrate and SampleRate are only for some Logitech mice. In
<BR># almost every case these lines should be omitted.
<BR>
<BR># Option "BaudRate" "9600"
<BR># Option "SampleRate" "150"
<BR>
<BR># Emulate3Buttons is an option for 2-button Microsoft mice
<BR># Emulate3Timeout is the timeout in milliseconds (default is 50ms)
<BR>
<BR># Option "Emulate3Buttons"
<BR># Option "Emulate3Timeout" "50"
<BR>
<BR># ChordMiddle is an option for some 3-button Logitech mice
<BR>
<BR># Option "ChordMiddle"
<BR>
<BR>EndSection
<BR>
<BR># Some examples of extended input devices
<BR>
<BR># Section "InputDevice"
<BR># Identifier "spaceball"
<BR># Driver "magellan"
<BR># Option "Device" "/dev/cua0"
<BR># EndSection
<BR>#
<BR># Section "InputDevice"
<BR># Identifier "spaceball2"
<BR># Driver "spaceorb"
<BR># Option "Device" "/dev/cua0"
<BR># EndSection
<BR>#
<BR># Section "InputDevice"
<BR># Identifier "touchscreen0"
<BR># Driver "microtouch"
<BR># Option "Device" "/dev/ttyS0"
<BR># Option "MinX" "1412"
<BR># Option "MaxX" "15184"
<BR># Option "MinY" "15372"
<BR># Option "MaxY" "1230"
<BR># Option "ScreenNumber" "0"
<BR># Option "ReportingMode" "Scaled"
<BR># Option "ButtonNumber" "1"
<BR># Option "SendCoreEvents"
<BR># EndSection
<BR>#
<BR># Section "InputDevice"
<BR># Identifier "touchscreen1"
<BR># Driver "elo2300"
<BR># Option "Device" "/dev/ttyS0"
<BR># Option "MinX" "231"
<BR># Option "MaxX" "3868"
<BR># Option "MinY" "3858"
<BR># Option "MaxY" "272"
<BR># Option "ScreenNumber" "0"
<BR># Option "ReportingMode" "Scaled"
<BR># Option "ButtonThreshold" "17"
<BR># Option "ButtonNumber" "1"
<BR># Option "SendCoreEvents"
<BR># EndSection
<BR><br>

[useless]

metti
<BR> Option "ZAxisMapping" "4 5"
<BR>subito dopo
<BR>
<BR># Option "ChordMiddle"
<BR>
<BR>prima di
<BR>
<BR>EndSection<br>

[ferenkileen]

ok. risolto. mi spiace averti (avervi) disturbato per una cosa così sciocca. è che la prima volta che l´avevo fatto avevo semplicemente pastato una serie di opzioni
<BR>e al riavvio lo scroll funzionava (vedi i miei primi post in questo forum in cui enumeravo le mie vittorie)
<BR>adesso mi salvo l´xf86config così com´è. almeno se dovessi rinstallare so già come fare.
<BR>a proposito: sto ancora cercando un programma che mi permetta di attivare la connessione adsl da gui in modo tale da non loggarmi da root e quindi ripetere la passwd 10000 volte al giorno. ho provato adsl-watch (preso da kde-apps) ma non son riuscito a compilarlo correttamente e mi ricordo che c´era tkpppoe che era la gui di pppoe ma secondo me c´è ancora qualcosa´altro..... tu (voi) come fai (fate)?<br>