slacky.eu

Sono passato al kernel testing 2.6.7.
<BR>funziona tutto ma dmesg mi ritorna una sfilza di errori (che vedo anche al boot)
<BR>
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>agpgart: Detected SiS 650 chipset
<BR>agpgart: Maximum main memory to use for agp memory: 409M
<BR>agpgart: AGP aperture is 64M @ 0xe8000000
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000316c02d]
<BR>ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
<BR>divert: not allocating divert_blk for non-ethernet device eth1
<BR>ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
<BR>pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
<BR>pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
<BR>
<BR>per concludere la mia è una slackware 9.1 aggiornata giornalmente a current, quindi in teoria è una 10.0 (?_?)
<BR>la mia macchina è un portatile asus p4 2800
<BR>a presto!
<BR><BR><BR>[ Questo Messaggio è stato Modificato da: wario il 27-07-2004 14:58 ]<br>

Sembra un semplice problema di acpi (nel log c´è scritto acpi dappertutto).
<BR>Devi ricompilarti il kernel abilitando solo il supporto acpi ottimizzato per il tuo portatile e togliendo APM.
<BR>Trovi tutto nella sezione del kernel power managment (se non ricordo male).
<BR>Ciauz!<br>

grazie ricompilerò<BR><BR>[ Questo Messaggio è stato Modificato da: wario il 29-07-2004 13:10 ]<br>