slacky.eu

Codice: Seleziona tutto

#!/bin/sh
# Set the system locale.  (no, we don't have a menu for this ;-)
# For a list of locales which are supported by this machine, type:
#   locale -a

# en_US is the Slackware default locale:
#export LANG=en_US
export LANG=it_IT@euro

# 'C' is the old Slackware (and UNIX) default, which is 127-bit
# ASCII with a charmap setting of ANSI_X3.4-1968.  These days,
# it's better to use en_US or another modern $LANG setting to
# support extended character sets.
#export LANG=C

# There is also support for UTF-8 locales, but be aware that
# some programs are not yet able to handle UTF-8 and will fail to
# run properly.  In those cases, you can set LANG=C before
# starting them.  Still, I'd avoid UTF unless you actually need it.
#export LANG=en_US.UTF-8

# Another option for en_US:
#export LANG=en_US.ISO8859-1

# One side effect of the newer locales is that the sort order
# is no longer according to ASCII values, so the sort order will
# change in many places.  Since this isn't usually expected and
# can break scripts, we'll stick with traditional ASCII sorting.
# If you'd prefer the sort algorithm that goes with your $LANG
# setting, comment this out.
export LC_COLLATE=C

# End of /etc/profile.d/lang.sh

Codice: Seleziona tutto

#!/bin/csh
# Set the system locale.  (no, we don't have a menu for this ;-)
# For a list of locales which are supported by this machine, type:
#   locale -a

# en_US is the Slackware default locale:
#setenv LANG en_US
setenv LANG it_IT

# 'C' is the old Slackware (and UNIX) default, which is 127-bit
# ASCII with a charmap setting of ANSI_X3.4-1968.  These days,
# it's better to use en_US or another modern $LANG setting to
# support extended character sets.
#setenv LANG C

# There is also support for UTF-8 locales, but be aware that
# some programs are not yet able to handle UTF-8 and will fail to
# run properly.  In those cases, you can set LANG=C before
# starting them.  Still, I'd avoid UTF unless you actually need it.
#setenv LANG en_US.UTF-8

# Another option for en_US:
#setenv LANG en_US.ISO8859-1

# One side effect of the newer locales is that the sort order
# is no longer according to ASCII values, so the sort order will
# change in many places.  Since this isn't usually expected and
# can break scripts, we'll stick with traditional ASCII sorting.
# If you'd prefer the sort algorithm that goes with your $LANG
# setting, comment this out.
setenv LC_COLLATE C

# End of /etc/profile.d/lang.csh

Codice: Seleziona tutto

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder57)  Sun Dec 14 20:59:00 PST 2008

# File generated by xf86config.
###########################################################################
#
# xorg.conf - 24.12.2008 - slackware 12.2 - sberla54
#
# contiene:
# driver video nvidia closed - rotellina - IMPS2 - refresh custom - risoluzione 1280x1024
# tastiera ita 105 - definizione mouse 800dpi per RX300
# testato con driver nvidia NVIDIA-Linux-x86-180.17-pkg1.run
# 
###########################################################################
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************
# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. :)
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# Setto la tastiera con la mappatura italiana a 105 tasti.
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Monitor section
# **********************************************************************
# Valori di default rilevati dall'installazione:
#Section "Monitor"
#
#    Identifier  "My Monitor"
#    HorizSync   31.5 - 50.0
#    VertRefresh 40-90
#
#EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    Identifier     "Simple Layout"
    Screen         "Screen 1" 0 0
    InputDevice    "Mouse1" "CorePointer"
    InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
#    ModulePath "/usr/lib/xorg/modules"
    RgbPath         "/usr/share/X11/rgb"
    FontPath        "/usr/share/fonts/local/"
    FontPath        "/usr/share/fonts/misc/"
    FontPath        "/usr/share/fonts/OTF/"
    FontPath        "/usr/share/fonts/TTF/"
    FontPath        "/usr/share/fonts/Type1/"
    FontPath        "/usr/share/fonts/CID/"
    FontPath        "/usr/share/fonts/Speedo/"
    FontPath        "/usr/share/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/75dpi/"
    FontPath        "/usr/share/fonts/100dpi/"
    FontPath        "/usr/share/fonts/cyrillic/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
    Load           "dbe"  	# Double buffer extension
    SubSection     "extmod"
        Option         "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load           "type1"
    Load           "freetype"
    #Load        "speedo"
    Load           "glx"
EndSection

Section "InputDevice"
    Identifier     "Keyboard1"
    Driver         "kbd"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "it"
EndSection

Section "InputDevice"

# Identifier and driver
    Identifier     "Mouse1"
    Driver         "mouse"
    Option         "Protocol" "IMPS/2"
# Riconoscimento rotellina:
    Option         "ZAxisMapping" "4 5"
    Option         "Device" "/dev/mouse"
# Risoluzione del Logitech RX300
    Option         "Resolution" "800"
EndSection

Section "Monitor"
    Identifier     "My Monitor"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
EndSection

Section "Device"

    #VideoRam    4096
    # Insert Clocks lines here if appropriate
    Identifier     "VESA Framebuffer"
    Driver         "nv"
EndSection

Section "Screen"
    Identifier     "Screen 1"
    Device         "VESA Framebuffer"
    Monitor        "My Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       32
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Codice: Seleziona tutto

Section "InputDevice"
    Identifier     "Keyboard1"
    Driver         "kbd"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "it"
EndSection

Codice: Seleziona tutto

        Option "AllowEmptyInput "FALSE"

Codice: Seleziona tutto

$ cat /etc/rc.d/rc.keymap
#!/bin/sh
# Load the keyboard map.  More maps are in /usr/share/kbd/keymaps.
if [ -x /usr/bin/loadkeys ]; then
 /usr/bin/loadkeys it.map
fi

Codice: Seleziona tutto

<?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
  <device>
    <match key="info.capabilities" contains="input.keymap">
      <append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
    </match>

    <match key="info.capabilities" contains="input.keys">
      <merge key="input.xkb.rules" type="string">base</merge>

      <!-- If we're using Linux, we use evdev by default (falling back to
           keyboard otherwise). -->
      <merge key="input.xkb.model" type="string">keyboard</merge>
      <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
             string="Linux">
        <merge key="input.xkb.model" type="string">evdev</merge>
      </match>

      <!-- Restore Ctrl-Alt-Bksp Xserver Zapping -->
      <merge key="input.xkb.options" type="string">terminate:ctrl_alt_bksp</merge>

      <merge key="input.xkb.layout" type="string">it</merge>
      <merge key="input.xkb.variant" type="string" />
    </match>
  </device>

Codice: Seleziona tutto

$ mkdir -p /etc/hal/fdi/policy/10osvendor
$ cp -p /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi /etc/hal/fdi/policy/10osvendor

Codice: Seleziona tutto

      <merge key="input.xkb.layout" type="string">us</merge>
      <merge key="input.xkb.variant" type="string" />

Codice: Seleziona tutto

      <merge key="input.xkb.layout" type="string">it</merge>
      <merge key="input.xkb.variant" type="string" />

Codice: Seleziona tutto

      <merge key="input.xkb.layout" type="string">fr</merge>
      <merge key="input.xkb.variant" type="string">una_qualsiasi_alternativa</merge>

Codice: Seleziona tutto

$ un_qualsiasi_editor /etc/X11/xorg.conf

Codice: Seleziona tutto

  Option         "AllowEmptyInput" "false"
  Option         "AutoAddDevices" "false"