Pagina 1 di 1
Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 10:44
da Sallival
Salve gente, è il secondo post in questo forum, ma uso slack da un bel po di tempo.
allora, ho fatto il passaggio a slack 13, tutto nella norma sino a ieri sera, sin quando, aggiungo il mio utente al gruppo video...
sloggo e riloggo e do il solito startx....e X mi parte a 640x480
ok, elimino l'utente dal gruppo...riavvio, ed è sempre tutto sballato, controllo xorg, ed è tutto corretto!
avendo un invidia e avendo installato i driver proprietari, utilizzo xorg.conf minimale editato per slack13:
Codice: Seleziona tutto
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
FontPath "/usr/lib/X11/fonts/misc/:unscaled"
[CUT]
FontPath "/usr/lib/X11/fonts/TTF/"
EndSection
Section "ServerFlags"
Option "AllowEmptyInput" "false"
Option "AutoAddDevices" "false"
Option "AutoEnableDevices" "false"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "it"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
[CUT]
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
non capisco che stia succedendo e come fare per riportare il tutto a 1280x1024!
unici errori di log sono:
Codice: Seleziona tutto
$ cat /var/log/Xorg.0.log |grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) config/hal: NewInputDeviceRequest failed (8)
(EE) config/hal: NewInputDeviceRequest failed (8)
(EE) config/hal: NewInputDeviceRequest failed (8)
in poche parole hal non vede la scheda, come dovrebbe essere, ma xorg non carica le impostazioni...
giusto?
avete ide su come risolvere?
Re: Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 10:50
da Blallo
che scheda usi? che drivei nvidia hai?
Re: Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 10:52
da raffaele181188
Ma dopo l'upgrade hai reinstallato i driver proprietari? Perchè il kernel è cambiato
Re: Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 10:57
da Sallival
ho una 8800gt e i driver sono questi NVIDIA-Linux-x86-185.18.36-pkg1.run
ma sino a ieri pomeriggio tutto andava alla grande....
non capisco che ci sia che ora non sta andando....
ho diverse distro di "prova" su gli hd, ho riavviato, e li è tutto ok..quindi escludo un guasto HW.
Re: Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 10:58
da Sallival
installato la current da zero questa domenica...e nessun upgrade...
Re: Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 11:01
da raffaele181188
Per me non stai usando i driver nvidia. Prova a disinstallarli, eliminare lo xorg.conf e reinstallare; poi riavvia. A volte ste cose si risolvono così. Male che vada ci hai perso dieci minuti.
Re: Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 13:02
da freax
io farei così :
A )
B ) con il sistema avviato al runlevel 3 inizia ad editare il file xorg.conf e prova prima con i driver
vesa e poi con i driver
nv , magari avviando la sessione grafica con
Re: Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 13:37
da Sallival
ci sono sviluppi....
ho disisntallato i driver nvidia, cancellato xorg.conf
dato startx e andava a 1024x768
ri installato i driver e ri fatto xorg.conf
l'accellerazione hw c'è quindi i driver vanno e xorg è caricato...ma non ne sono sicuro!! perche?
perche come mod ho messo _solo_ 1280x1024 con dep 24
e la risoluzione è di 1024x768! cosa impossibile se hal si fa da parte e "detta legge" xorg.conf
nei log nulla di anomalo
$ cat /var/log/Xorg.0.log |grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) config/hal: NewInputDeviceRequest failed (8)
(EE) config/hal: NewInputDeviceRequest failed (8)
(EE) config/hal: NewInputDeviceRequest failed (8)
mi sta venendo il dubbio che non ci sia qualche intoppo con:
HorizSync 31,5 - 50.0
VertRefresh 40 - 90.0
non ho mai capito perfettamente come funzionino sti parametri...
per un monitor da 17 non 16:9 con risoluzione 1280x1024 che parametri dovrei usare??
sto valutando l'ipotesi di tornare alla 12.2 e aspettare una 13.1
Re: Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 14:20
da raffaele181188
Penso che i parametri siano corretti...
Potresti postare l'intero log? O magari allegarlo
Re: Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 18:52
da Sallival
faccio copia incolla....nn so ancora come si allegano i file
comunque come si vede dal log il 1280x1024 non lo accetta e "swiccia" a 1024x768....
e non capisco perche ora faccia cosi, quando ieri andava tranquillo a 1280! mhaaaaaa!
Codice: Seleziona tutto
cat /var/log/Xorg.0.log
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux RoToR 2.6.29.6-smp #2 SMP Mon Aug 17 00:52:54 CDT 2009 i686
Build Date: 03 August 2009 06:51:50PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 21 12:27:51 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "AllowEmptyInput" "false"
(**) Option "AutoAddDevices" "false"
(**) Option "AutoEnableDevices" "false"
(**) Not automatically adding devices
(**) Not automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/lib/X11/fonts/misc/:unscaled,
/usr/lib/X11/fonts/100dpi/:unscaled,
/usr/lib/X11/fonts/75dpi/:unscaled,
/usr/lib/X11/fonts/misc/,
/usr/lib/X11/fonts/Type1/,
/usr/lib/X11/fonts/Speedo/,
/usr/lib/X11/fonts/100dpi/,
/usr/lib/X11/fonts/75dpi/,
/usr/lib/X11/fonts/cyrillic/,
/usr/lib/X11/fonts/TTF/,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1de0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0611:1043:8260 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.36 Fri Aug 14 17:50:12 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:24:40 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 62.92.12.00.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8800 GT at PCI:1:0:0:
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1280x1024"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0): "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from CRT-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Keyboard0: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/psaux"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Liteon Microsoft? Wireless Receiver 700 v2.0
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Liteon Microsoft? Wireless Receiver 700 v2.0
(EE) config/hal: NewInputDeviceRequest failed (8)
Re: Slack13 e X a 640x480
Inviato: sab 21 nov 2009, 20:33
da luka64
se provi a commentare la riga dei Modes da così
a così
cambia qualcosa?
Re: Slack13 e X a 640x480
Inviato: dom 22 nov 2009, 9:22
da tigerwalk
Io proverei a lasciare in xorg.conf solo la parte relativa alla scheda video, per intenderci la Section "Device" e lasciare il resto ad hal!
Re: Slack13 e X a 640x480
Inviato: dom 22 nov 2009, 10:24
da raffaele181188
Questi problemi sono frustranti, cavolo...
Io proverei a fare come dice tigerwalk, o togli almeno le impostazioni delle frequenze del monitor (io una volta risolsi così, non ricordo la distro...)
Altra possibilità è usare il programma xrandr e vedere che dice (anche se per me è illogica come soluzione, sul forum di Debian qualcuno ha fatto così)
Infine prova con altri driver, più nuovi o più vecchi
Re: Slack13 e X a 640x480
Inviato: dom 22 nov 2009, 16:47
da Sallival
ho risolto!!!!
a quanto pare, hal o sti driver nvidia
, sono molto schizzinosi......
come dicevo e supponevo, non digeriva i valori di HorizSync e VertRefresh!!!!!!
il motivo non ne ho idea.........
comunque recuperato il manuale del monitor, e messo i valori indicati, riavviato X e per magia tadaaaaaaaaa
1280x1024 a 60 o 75 Hz
quindi se vi capita cosa simile, recuperate i valori indicati dal manuale e provate.
comunque grazie a tutti per l'aiuto
