slacky.eu

Ciao a tutti
<BR>ho provato a cercare sul forum, ma niente mi è stato d´aiuto. La domanda è semplice: perchè non riesco a scaricare i pacchetti presenti su Slacky tramite swaret? Le istruzioni le ho seguite, l´update crea i file, ma quando faccio la ricerca non trova assolutamente nulla!
<BR>
<BR>Help me<br>

non so io l´ho fatto oggi ed ha funzionato<br>

Potresti postarmi lo swaret.conf? Che versione usi?<br>

RET EXAMPLE CONFIGURATION FILE ###
<BR>#
<BR># Define a valid Slackware Linux Version.
<BR># (Used for Dependency Support and other Features)
<BR>#
<BR># NOTE: If you want to use Slackware Linux Current,
<BR># set VERSION to ´current´ (VERSION=current).
<BR>#
<BR>VERSION=current
<BR>#
<BR># Define the language for status and error messages
<BR>LANGUAGE=ITALIANO
<BR>#
<BR># ----------------------------------------------------------
<BR># Define Slackware (8.1 or Higher or Current) Linux Mirrors.
<BR># (Used for Official Slackware Linux Packages)
<BR># (Slackware Linux Mirrors available at <a href="http://www.slackware.com" target="_blank" target="_new">http://www.slackware.com</a>)
<BR>#
<BR># Syntax: ROOT=PROTOCOL:URL
<BR>#
<BR># NOTE: swaret will use the order of the specified ROOT URL´s.
<BR>#
<BR>#ROOT=file:/mnt/cdrom
<BR>#ROOT=file:/mnt/dvdrom
<BR>#ROOT=file:/mnt/usbmemstick
<BR>ROOT=ftp://ftp.nluug.nl/pub/os/Linux/distr/s ... e-$VERSION
<BR>ROOT=http://sunsite.cnlab-switch.ch/ftp/mirr ... e-$VERSION
<BR>ROOT=ftp://ftp.slackware.no/pub/linux/slackw ... e-$VERSION
<BR>ROOT=http://www.slackware.no/slackware/slackware-$VERSION
<BR>ROOT=ftp://ftp.slackware.at/slackware-$VERSION
<BR>ROOT=http://www.slackware.at/data/slackware-$VERSION
<BR>ROOT=ftp://ftp.planetmirror.com/pub/slackwar ... e-$VERSION
<BR>ROOT=http://ftp.planetmirror.com/pub/slackwa ... e-$VERSION
<BR>#ROOT=rsync://rsync.slackware.no/slackware/slackware-$VERSION
<BR>#ROOT=rsync://rsync.slackware.at/slackware/slackware-$VERSION
<BR>#ROOT=file:/pub/slackware
<BR>#ROOT=file:/mnt/nfsshare/slackware
<BR>#ROOT=file:/mnt/sambashare/slackware
<BR>#
<BR># -----------------------------------------------------------
<BR># Define Repository URL´s with Slackware Linux Packages.
<BR># (Used for Repository Slackware Linux Packages)
<BR># (Repository URL´s available at <a href="http://www.swaret.org/?menu=sp" target="_blank" target="_new">http://www.swaret.org/?menu=sp</a>)
<BR>#
<BR># NOTE 1: To use a Local Repository or Remote Repository,
<BR># be sure it contains the following Files:
<BR># - CHECKSUMS.md5 (For MD5 Sum, REQUIRED)
<BR># - FILELIST.TXT (For Package Name + Size, REQUIRED)
<BR># - PACKAGES.TXT (For Package Description, NOT REQUIRED)
<BR># - MANIFEST.bz2 (For Dependency Support, NOT REQUIRED)
<BR># NOTE 2: To create your own Repository, use ´swaret-tools´.
<BR># You can get ´swaret-tools´ at <a href="http://www.swaret.org" target="_blank" target="_new">http://www.swaret.org</a>!
<BR>#
<BR># Syntax: REPOS_ROOT=REPOSITORYNAME%PROTOCOL:URL
<BR>#
<BR># NOTE 1: The REPOSITORY NAME can only be ONE Keyword!
<BR># NOTE 2: swaret will use the order of the specified REPOS_ROOT URL´s.
<BR>#
<BR>REPOS_ROOT=BlazeBox%http://users.lichtsnel.nl/pub/slackware
<BR>REPOS_ROOT=CuoreDOTORG%http://heart.cuore.org/packages/slackware
<BR>REPOS_ROOT=LinuxPackagesDOTNET.FTP%ftp://ftp3.linuxpackages.net/pub/Slackware-10.0
<BR>REPOS_ROOT=LinuxPackagesDOTNET.HTTP%http://www2.linuxpackages.net/Slackware-10.0
<BR>REPOS_ROOT=SlackPack%http://packs.slack.it/
<BR>REPOS_ROOT=GurnoDOTCOM%http://gurno.com/adam/slack/
<BR>REPOS_ROOT=Slacky.it%http://www.slacky.it/download
<BR>#
<BR># ------------------------------------------------------------
<BR># Define Libraries (8.1 or Higher or Current) List Mirrors.
<BR># (Used for Dependency Support)
<BR>#
<BR># NOTE 1: You need to specify a Libraries List Mirror which
<BR># contains a ´libraries-VERSION´ File.
<BR>#
<BR># NOTE 2: To create the Libraries List, use ´swaret-tools´.
<BR># You can get ´swaret-tools´ at <a href="http://www.swaret.org" target="_blank" target="_new">http://www.swaret.org</a>!
<BR># You can also clear all DEP_ROOT Variable(s) which will
<BR># allow swaret to create the Libraries List for you
<BR># during Dependency Check using the defined ROOT Variable(s) above.
<BR>#
<BR># Syntax: DEP_ROOT=PROTOCOL:URL
<BR>#
<BR># NOTE: swaret will use the order of the specified DEP_ROOT URL´s.
<BR>#
<BR>#DEP_ROOT=file:/mnt/cdrom
<BR>#DEP_ROOT=file:/mnt/dvdrom
<BR>#DEP_ROOT=file:/mnt/usbmemstick
<BR>DEP_ROOT=http://www.swaret.org/swaret
<BR>DEP_ROOT=ftp://ftp.swaret.org/swaret
<BR>#DEP_ROOT=rsync://rsync.swaret.org/swaret
<BR>#DEP_ROOT=file:/pub/swaret
<BR>#DEP_ROOT=file:/mnt/nfsshare/swaret
<BR>#DEP_ROOT=file:/mnt/sambashare/swaret
<BR>#
<BR># ----------------------------------------------------------
<BR># General Settings
<BR>#
<BR># Do you want swaret to use Random Slackware Linux Mirrors?
<BR># -> 1 for yes, 0 for no.
<BR>#
<BR>RANDOMR=0
<BR>#
<BR># Do you want swaret to parse all the Package Descriptions?
<BR># -> If set to 1, swaret will also match Packages whose Description
<BR># is matching the Keyword(s) you specify after --ACTION.
<BR># NOTE: swaret will parse all the Package Descriptions for this,
<BR># and might slow down swaret when using an older System.
<BR># -> If set to 0, swaret will not use Package Descriptions
<BR># to match one or more Packages.
<BR>#
<BR>USEPKGDESC=0
<BR>#
<BR># If you don´t want swaret to Upgrade, Install, Re-Install, Download,...
<BR># some Packages, add the KEYWORDS to the EXCLUDE Variable.
<BR># To disable Exclude Method: swaret --exclude -off
<BR># To enable Exclude Method: swaret --exclude -on
<BR>#
<BR># NOTE: You can add ANY EXTENDED REGEXP (Regular Expression) to the EXCLUDE Variable(s)
<BR>#
<BR># Basic Exclude
<BR>#
<BR>EXCLUDE=kernel
<BR>EXCLUDE=lilo swaret
<BR>EXCLUDE=MANIFEST.bz2$
<BR>EXCLUDE=.*dl$ .*PACKAGER$ .*MYBUILD$
<BR>#EXCLUDE=kde*
<BR>EXCLUDE=xine*
<BR>EXCLUDE=qt-*
<BR>EXCLUDE=j2sdk
<BR>EXCLUDE=lopster
<BR># Advanced Exclude
<BR># Syntax: KEYWORD[DONT_EXCLUDE_ME_KEYWORD1,DONT_EXCLUDE_ME_KEYWORD2,...]
<BR># Example: kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB]
<BR>#
<BR>#
<BR># Do you want to enable Dependency Check?
<BR># -> If set to 1, swaret will start the Dependency Check after
<BR># every Upgrade, Install and Re-Install Procedure.
<BR># -> If set to 0, swaret will not start the Dependency Check
<BR># after any Procedure.
<BR>#
<BR>DEPENDENCY=1
<BR>#
<BR># Do you want swaret to Search for missing Libraries (and Fix)
<BR># which could be found on your System, but not tracked by ldconfig?
<BR># -> 1 for yes, 0 for no.
<BR>#
<BR>DSEARCHLIB=1
<BR>#
<BR># Set to 1, if you want swaret to use the ´slocate´ program
<BR># to Search for missing Libraries.
<BR># (be sure to issue the ´updatedb´ Command regularly!)
<BR># If DSEARCHM is set to 0, swaret will use
<BR># the ´find´ program to locate missing Libraries.
<BR># -> 1 for yes, 0 for no.
<BR>#
<BR>DSEARCHM=0
<BR>#
<BR># Start MD5 Check after Fetching Packages, Patches and Sources?
<BR># -> 1 for yes, 0 for no.
<BR>#
<BR>MD5CHECK=1
<BR>#
<BR># Start GPG Signature Check after Fetching Packages, Patches and Sources?
<BR>#
<BR># NOTE: Check out F.A.Q. (--faq gpg) how to Import a Public GPG Key which
<BR># will be used by the GPG Signature Check.
<BR>#
<BR># -> 1 for yes, 0 for no.
<BR>#
<BR>GPGCHECK=0
<BR>#
<BR># Show Description for Packages during
<BR># Upgrade, Install, Re-Install,... Procedures?
<BR># -> If set to 0, you will not see a Description.
<BR># -> If set to 1, you will see a Description.
<BR>#
<BR>DESC=0
<BR>#
<BR># Cache Directory for (Repository) Packages and Sources.
<BR>#
<BR>CACHE_DIR=/var/swaret
<BR>#
<BR># Enable Logging?
<BR># -> 1 for yes, 0 for no.
<BR>#
<BR>LOG=1
<BR>#
<BR># swaret Log File
<BR>#
<BR>LOG_FILE=/var/log/swaret
<BR>#
<BR># Show Warnings?
<BR># -> 1 for yes, 0 for no.
<BR>#
<BR>WARNINGS=1
<BR>#
<BR># Show Information?
<BR># -> 1 for yes, 0 for no.
<BR>#
<BR>INFORMATION=1
<BR>#
<BR># -------------------------------------------------------------
<BR># Network Settings
<BR>#
<BR># Network Interface
<BR># Use this if you have a Network Interface.
<BR>#
<BR>NIC=eth0
<BR>#
<BR># Local Interface
<BR># Use this if you do not have a Network Interface.
<BR>#
<BR># For Example (CD-ROM):
<BR># You got a Slackware Linux CD-ROM,
<BR># mount the CD-ROM to /mnt/cdrom and
<BR># set ROOT to ´file:/mnt/cdrom´ in /etc/swaret.conf.
<BR># Also, set NIC to ´lo´ (Local Loop Device).
<BR>#
<BR># NIC=lo
<BR>#
<BR># Progress
<BR># If set to 0, swaret will use the ´%´ Download Interface.
<BR># If set to 1, swaret will use the ´size´ Download Interface.
<BR># If set to 2, swaret will use the ´wget/rsync´ Download Interface.
<BR>#
<BR>PROGRESS=1
<BR>#
<BR># Timeout for wget and/or rsync.
<BR># -> Number of seconds for Timeout
<BR>#
<BR>TIMEOUT=35
<BR>#
<BR># Retries for wget and/or rsync.
<BR># -> Number of Retries
<BR>#
<BR>RETRIES=5
<BR>#
<BR># Behind a Firewall? Using FTP Mirrors?
<BR># -> 1 for yes, 0 for no
<BR>#
<BR>PASSIVE_FTP=1
<BR>#
<BR># If you want HTTP or FTP Proxy Support,
<BR># uncomment and Setup the following Variable:
<BR>#
<BR># WGET_PROXY=http://IP or HOST:PORT
<BR>#
<BR># If you want RSYNC Proxy Support,
<BR># uncomment and Setup the following Variable:
<BR>#
<BR># RSYNC_PROXY=IP or HOST:PORT
<BR>#
<BR>### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###
<BR><br>

Grazie!
<BR>Però se non ho capito male il funzionamento di swaret, con questa configurazione Slacky è l´ultimo in cui swaret vada a vedere se ci sono i file che cerchi. Se come REPOS lo lascio da solo e cerco un pacchetto presente sul sito, lui non lo trova!<br>

E´ ufficiale... non calcola i REPOSITORY!<br>

Dunque, ho trovato il problema, ma non me lo spiego, nè so come risolverlo... mi spiego: tutto nasce dal fatto che ho cambiato la directory di CACHE, ponendola su una partizione FAT. Ho notato che l´update produce 3 file e non 5! Quindi i pacchetti dei REPOS non mi vengono letti... qualcuno ha idea?
<BR>
<BR>Grazie
<BR>
<BR>Susu<br>

Nessuna idea? Mi sa che sarò costretto a toglierlo... nella partizione di linux non ho molto spazio...<br>