slacky.eu

Messaggio da **goldy** » dom 20 feb 2005, 18:29 · dom 20 feb 2005, 18:29

nvidia o kernel-2.6.10?

Cita

Messaggio da goldy » dom 20 feb 2005, 18:29

Allora visto che mi sono fatto un
 computer mezzo nuovo
 ho cambiato oltre al
 processore (come scritto in post precedente)
 anche la scheda madre.
 Ho un gravissimo problema però
 ho installato la slackware 10 nuova di zecca,
 ho compilato il kernel 2.6.10
 tutto ok nessun errore solo che slack
 si blocca dopo nemmeno due minuti,
 sono costretto a resettare visto che non
 risponde a nessun comando.
 Ho notato però che questo problema
 ho iniziato ad averlo dopo aver
 installato i driver della nvidia (che poi sono
 gli ultimi che ho trovato sul sito)
 Vi chiedo il problema quale può essere
 i driver nvidia incompatibili con il kernel 2.6.10?
 o un problema con la scheda madre (asus a7v8x-x)?
 Tra l´altro lo stesso crash lo ricevo anche con un a´ltra distibuzione
 la suse 9.2 che ho voluto provare per curiosità
 sempre con kernel 2.6.10 , ma senza driver nvidia ufficiali.
 Avete qualche idea?
 Grazie mille a chi può aiutami

Messaggio da **gianPrazio** » dom 20 feb 2005, 18:51 · dom 20 feb 2005, 18:51

nvidia o kernel-2.6.10?

Cita

Messaggio da gianPrazio » dom 20 feb 2005, 18:51

Non credo che c´entrino i driver nvidia: almeno, io li utilizzo insieme al 2.6.10 e non mi hanno mai dato problemi, fino ad ora. Probabilmente il problema e´ da ricercarsi in un conflitto hardware: hai modo di postare il contenuto di /var/log/messages?
 ciao

Messaggio da **goldy** » dom 20 feb 2005, 19:04 · dom 20 feb 2005, 19:04

nvidia o kernel-2.6.10?

Cita

Messaggio da goldy » dom 20 feb 2005, 19:04

Feb 20 17:02:27 darkstar syslogd 1.4.1: restart.
 Feb 20 17:02:28 darkstar kernel: klogd 1.4.1, log source = /proc/kmsg started.
 Feb 20 17:02:28 darkstar kernel: BIOS-provided physical RAM map:
 Feb 20 17:02:28 darkstar kernel: 511MB LOWMEM available.
 Feb 20 17:02:28 darkstar kernel: Initializing CPU#0
 Feb 20 17:02:28 darkstar kernel: Memory: 515368k/524272k available (1844k kernel code, 8516k reserved, 618k data, 120k init, 0k highmem)
 Feb 20 17:02:28 darkstar kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
 Feb 20 17:02:28 darkstar kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
 Feb 20 17:02:28 darkstar kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
 Feb 20 17:02:28 darkstar kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
 Feb 20 17:02:28 darkstar kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 Feb 20 17:02:28 darkstar kernel: CPU: L2 Cache: 512K (64 bytes/line)
 Feb 20 17:02:28 darkstar kernel: Enabling fast FPU save and restore... done.
 Feb 20 17:02:28 darkstar kernel: Enabling unmasked SIMD FPU exception support... done.
 Feb 20 17:02:28 darkstar kernel: Checking ´hlt´ instruction... OK.
 Feb 20 17:02:28 darkstar kernel: PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
 Feb 20 17:02:28 darkstar kernel: PCI: Using configuration type 1
 Feb 20 17:02:28 darkstar kernel: PCI: Probing PCI hardware
 Feb 20 17:02:28 darkstar kernel: PCI: Using IRQ router VIA [1106/3177] at 00:11.0
 Feb 20 17:02:28 darkstar kernel: Linux NET4.0 for Linux 2.4
 Feb 20 17:02:28 darkstar kernel: Based upon Swansea University Computer Society NET3.039
 Feb 20 17:02:28 darkstar kernel: VFS: Disk quotas vdquot_6.5.1
 Feb 20 17:02:28 darkstar kernel: Journalled Block Device driver loaded
 Feb 20 17:02:28 darkstar kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
 Feb 20 17:02:28 darkstar kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
 Feb 20 17:02:28 darkstar kernel: Real Time Clock Driver v1.10f
 Feb 20 17:02:28 darkstar kernel: Floppy drive(s): fd0 is 1.44M
 Feb 20 17:02:28 darkstar kernel: FDC 0 is a post-1991 82077
 Feb 20 17:02:28 darkstar kernel: loop: loaded (max 8 devices)
 Feb 20 17:02:28 darkstar kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
 Feb 20 17:02:28 darkstar kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 Feb 20 17:02:28 darkstar kernel: VP_IDE: IDE controller at PCI slot 00:11.1
 Feb 20 17:02:28 darkstar kernel: VP_IDE: chipset revision 6
 Feb 20 17:02:28 darkstar kernel: VP_IDE: not 100%% native mode: will probe irqs later
 Feb 20 17:02:28 darkstar kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 Feb 20 17:02:28 darkstar kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
 Feb 20 17:02:28 darkstar kernel: ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
 Feb 20 17:02:28 darkstar kernel: ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
 Feb 20 17:02:28 darkstar kernel: hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=4866/255/63, UDMA(133)
 Feb 20 17:02:28 darkstar kernel: hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(33)
 Feb 20 17:02:28 darkstar kernel: hdb: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
 Feb 20 17:02:28 darkstar kernel: Uniform CD-ROM driver Revision: 3.12
 Feb 20 17:02:28 darkstar kernel: hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
 Feb 20 17:02:28 darkstar kernel: Partition check:
 Feb 20 17:02:28 darkstar kernel: hda: hda1 hda2 hda3
 Feb 20 17:02:28 darkstar kernel: hdc: [PTBL] [9964/255/63] hdc1 hdc2 < hdc5 hdc6 hdc7 >
 Feb 20 17:02:28 darkstar kernel: SCSI subsystem driver Revision: 1.00
 Feb 20 17:02:28 darkstar kernel: md: linear personality registered as nr 1
 Feb 20 17:02:28 darkstar kernel: md: raid0 personality registered as nr 2
 Feb 20 17:02:28 darkstar kernel: md: raid1 personality registered as nr 3
 Feb 20 17:02:28 darkstar kernel: md: raid5 personality registered as nr 4
 Feb 20 17:02:28 darkstar kernel: raid5: measuring checksumming speed
 Feb 20 17:02:28 darkstar kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
 Feb 20 17:02:28 darkstar kernel: md: Autodetecting RAID arrays.
 Feb 20 17:02:28 darkstar kernel: md: autorun ...
 Feb 20 17:02:28 darkstar kernel: md: ... autorun DONE.
 Feb 20 17:02:28 darkstar kernel: LVM version 1.0.8(17/11/2003)
 Feb 20 17:02:28 darkstar kernel: Initializing Cryptographic API
 Feb 20 17:02:28 darkstar kernel: NET4: Linux TCP/IP 1.0 for NET4.0
 Feb 20 17:02:28 darkstar kernel: IP Protocols: ICMP, UDP, TCP, IGMP
 Feb 20 17:02:28 darkstar kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
 Feb 20 17:02:28 darkstar kernel: TCP: Hash tables configured (established 32768 bind 65536)
 Feb 20 17:02:28 darkstar kernel: Linux IP multicast router 0.06 plus PIM-SM
 Feb 20 17:02:28 darkstar kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
 Feb 20 17:02:28 darkstar kernel: kjournald starting. Commit interval 5 seconds
 Feb 20 17:02:28 darkstar kernel: EXT3-fs: mounted filesystem with ordered data mode.
 Feb 20 17:02:28 darkstar kernel: Freeing unused kernel memory: 120k freed
 Feb 20 17:02:28 darkstar kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
 Feb 20 17:02:28 darkstar kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
 Feb 20 17:02:28 darkstar kernel: agpgart: Maximum main memory to use for agp memory: 439M
 Feb 20 17:02:28 darkstar kernel: agpgart: Detected Via Apollo Pro KT400 chipset
 Feb 20 17:02:28 darkstar kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
 Feb 20 17:02:28 darkstar kernel: NTFS driver v1.1.22 [Flags: R/O MODULE]
 Feb 20 17:02:28 darkstar logger: /etc/rc.d/rc.inet1: /sbin/ifconfig lo 127.0.0.1
 Feb 20 17:02:28 darkstar logger: /etc/rc.d/rc.inet1: /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
 Feb 20 17:02:28 darkstar logger: /etc/rc.d/rc.hotplug start (entering script)
 Feb 20 17:02:28 darkstar kernel: via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
 Feb 20 17:02:28 darkstar kernel: <a href="http://www.scyld.com/network/via-rhine.html" target="_blank" target="_new">http://www.scyld.com/network/via-rhine.html</a>
 Feb 20 17:02:28 darkstar kernel: PCI: Assigned IRQ 5 for device 00:12.0
 Feb 20 17:02:28 darkstar kernel: eth0: VIA VT6102 Rhine-II at 0xb400, 00:11:2f:ca:c3:ab, IRQ 5.
 Feb 20 17:02:28 darkstar kernel: eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
 Feb 20 17:02:29 darkstar kernel: PCI: Found IRQ 4 for device 00:11.5
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:11.5, have irq 3, want irq 4
 Feb 20 17:02:29 darkstar kernel: usb.c: registered new driver usbdevfs
 Feb 20 17:02:29 darkstar kernel: usb.c: registered new driver hub
 Feb 20 17:02:29 darkstar kernel: PCI: Found IRQ 3 for device 00:10.3
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.0, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.1, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.2, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.3, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
 Feb 20 17:02:29 darkstar kernel: ehci_hcd 00:10.3: irq 10, pci mem e08f7000
 Feb 20 17:02:29 darkstar kernel: usb.c: new USB bus registered, assigned bus number 1
 Feb 20 17:02:29 darkstar kernel: ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
 Feb 20 17:02:29 darkstar kernel: hub.c: USB hub found
 Feb 20 17:02:29 darkstar kernel: hub.c: 6 ports detected
 Feb 20 17:02:29 darkstar kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
 Feb 20 17:02:29 darkstar kernel: PCI: Found IRQ 3 for device 00:10.0
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.0, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.1, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.2, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.3, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: uhci.c: USB UHCI at I/O 0xd800, IRQ 10
 Feb 20 17:02:29 darkstar kernel: usb.c: new USB bus registered, assigned bus number 2
 Feb 20 17:02:29 darkstar kernel: hub.c: USB hub found
 Feb 20 17:02:29 darkstar kernel: hub.c: 2 ports detected
 Feb 20 17:02:29 darkstar kernel: PCI: Found IRQ 3 for device 00:10.1
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.0, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.1, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.2, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: IRQ routing conflict for 00:10.3, have irq 10, want irq 3
 Feb 20 17:02:29 darkstar kernel: uhci.c: USB UHCI at I/O 0xd400, IRQ 10
 Feb 20 17:02:29 darkstar kernel: usb.c: new USB bus registered, assigned bus number 3
 Feb 20 17:02:30 darkstar kernel: hub.c: USB hub found
 Feb 20 17:02:30 darkstar kernel: hub.c: 2 ports detected
 Feb 20 17:02:30 darkstar kernel: PCI: Found IRQ 3 for device 00:10.2
 Feb 20 17:02:30 darkstar kernel: IRQ routing conflict for 00:10.0, have irq 10, want irq 3
 Feb 20 17:02:30 darkstar kernel: IRQ routing conflict for 00:10.1, have irq 10, want irq 3
 Feb 20 17:02:30 darkstar kernel: IRQ routing conflict for 00:10.2, have irq 10, want irq 3
 Feb 20 17:02:30 darkstar kernel: IRQ routing conflict for 00:10.3, have irq 10, want irq 3
 Feb 20 17:02:30 darkstar kernel: uhci.c: USB UHCI at I/O 0xd000, IRQ 10
 Feb 20 17:02:30 darkstar kernel: usb.c: new USB bus registered, assigned bus number 4
 Feb 20 17:02:30 darkstar kernel: hub.c: USB hub found
 Feb 20 17:02:30 darkstar kernel: hub.c: 2 ports detected
 Feb 20 17:02:31 darkstar logger: /etc/rc.d/rc.inet1: /sbin/iwconfig eth0 nick darkstar
 Feb 20 17:02:31 darkstar logger: /etc/rc.d/rc.inet1: /sbin/iwconfig eth0 essid any
 Feb 20 17:02:31 darkstar kernel: hub.c: new USB device 00:10.0-1, assigned address 2
 Feb 20 17:02:31 darkstar kernel: hub.c: USB hub found
 Feb 20 17:02:31 darkstar kernel: hub.c: 4 ports detected
 Feb 20 17:02:32 darkstar kernel: hub.c: new USB device 00:10.0-2, assigned address 3
 Feb 20 17:02:32 darkstar kernel: hub.c: new USB device 00:10.0-1.1, assigned address 4
 Feb 20 17:02:33 darkstar kernel: hub.c: new USB device 00:10.0-1.2, assigned address 5
 Feb 20 17:02:35 darkstar usb.agent[888]: ... no modules for USB product 8ea/ca/100
 Feb 20 17:02:35 darkstar kernel: usb.c: registered new driver usblp
 Feb 20 17:02:35 darkstar kernel: printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x105C
 Feb 20 17:02:35 darkstar kernel: printer.c: v0.13: USB Printer Device Class driver
 Feb 20 17:02:36 darkstar kernel: usb.c: registered new driver usbscanner
 Feb 20 17:02:36 darkstar kernel: scanner.c: USB scanner device (0x03f0/0x0605) now attached to scanner0
 Feb 20 17:02:36 darkstar kernel: scanner.c: 0.4.16:USB Scanner Driver
 Feb 20 17:02:43 darkstar logger: /etc/rc.d/rc.hotplug start (exiting script)
 Feb 20 17:02:44 darkstar sshd[1239]: Server listening on 0.0.0.0 port 22.
 Feb 20 17:02:53 darkstar /usr/sbin/gpm[1291]: imps2: Auto-detected standard PS/2
 Feb 20 17:22:27 darkstar -- MARK --
 Feb 20 17:42:27 darkstar -- MARK --
 Feb 20 18:02:27 darkstar -- MARK --
 Feb 20 18:04:41 darkstar init: Switching to runlevel: 6
 Feb 20 18:04:50 darkstar exiting on signal 15
 Feb 20 18:05:31 darkstar syslogd 1.4.1: restart.
 Feb 20 18:05:32 darkstar kernel: klogd 1.4.1, log source = /proc/kmsg started.
 Feb 20 18:05:32 darkstar kernel: BIOS-provided physical RAM map:
 Feb 20 18:05:32 darkstar kernel: 511MB LOWMEM available.
 Feb 20 18:05:32 darkstar kernel: DMI 2.3 present.
 Feb 20 18:05:32 darkstar kernel: ACPI: PM-Timer IO Port: 0xe408
 Feb 20 18:05:32 darkstar kernel: Initializing CPU#0
 Feb 20 18:05:32 darkstar kernel: Using pmtmr for high-res timesource
 Feb 20 18:05:32 darkstar kernel: Memory: 515444k/524272k available (2096k kernel code, 8240k reserved, 860k data, 160k init, 0k highmem)
 Feb 20 18:05:32 darkstar kernel: Security Framework v1.0.0 initialized
 Feb 20 18:05:32 darkstar kernel: SELinux: Initializing.
 Feb 20 18:05:32 darkstar kernel: SELinux: Starting in permissive mode
 Feb 20 18:05:32 darkstar kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 Feb 20 18:05:32 darkstar kernel: CPU: L2 Cache: 512K (64 bytes/line)
 Feb 20 18:05:32 darkstar kernel: Intel machine check architecture supported.
 Feb 20 18:05:32 darkstar kernel: Intel machine check reporting enabled on CPU#0.
 Feb 20 18:05:32 darkstar kernel: Enabling fast FPU save and restore... done.
 Feb 20 18:05:32 darkstar kernel: Enabling unmasked SIMD FPU exception support... done.
 Feb 20 18:05:32 darkstar kernel: Checking ´hlt´ instruction... OK.
 Feb 20 18:05:32 darkstar kernel: NET: Registered protocol family 16
 Feb 20 18:05:32 darkstar kernel: PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
 Feb 20 18:05:32 darkstar kernel: PCI: Using configuration type 1
 Feb 20 18:05:32 darkstar kernel: ACPI: Subsystem revision 20041105
 Feb 20 18:05:32 darkstar kernel: ACPI: Interpreter enabled
 Feb 20 18:05:32 darkstar kernel: ACPI: Using PIC for interrupt routing
 Feb 20 18:05:32 darkstar kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
 Feb 20 18:05:32 darkstar kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
 Feb 20 18:05:32 darkstar kernel: pnp: PnP ACPI init
 Feb 20 18:05:32 darkstar kernel: pnp: PnP ACPI: found 14 devices
 Feb 20 18:05:32 darkstar kernel: SCSI subsystem initialized
 Feb 20 18:05:32 darkstar kernel: usbcore: registered new driver usbfs
 Feb 20 18:05:32 darkstar kernel: usbcore: registered new driver hub
 Feb 20 18:05:32 darkstar kernel: PCI: Using ACPI for IRQ routing
 Feb 20 18:05:32 darkstar kernel: ** PCI interrupts are no longer routed automatically. If this
 Feb 20 18:05:32 darkstar kernel: ** causes a device to stop working, it is probably because the
 Feb 20 18:05:32 darkstar kernel: ** driver failed to call pci_enable_device(). As a temporary
 Feb 20 18:05:32 darkstar kernel: ** workaround, the "pci=routeirq" argument restores the old
 Feb 20 18:05:32 darkstar kernel: ** behavior. If this argument makes the device work again,
 Feb 20 18:05:32 darkstar kernel: ** please email the output of "lspci" to <a href="mailto:bjorn.helgaas@hp.com" target="_new">bjorn.helgaas@hp.com</a>
 Feb 20 18:05:32 darkstar kernel: ** so I can fix the driver.
 Feb 20 18:05:32 darkstar kernel: pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
 Feb 20 18:05:32 darkstar kernel: pnp: 00:01: ioport range 0xe800-0xe81f has been reserved
 Feb 20 18:05:32 darkstar kernel: pnp: 00:0d: ioport range 0x290-0x297 has been reserved
 Feb 20 18:05:32 darkstar kernel: pnp: 00:0d: ioport range 0x370-0x375 has been reserved
 Feb 20 18:05:32 darkstar kernel: Simple Boot Flag at 0x3a set to 0x1
 Feb 20 18:05:32 darkstar kernel: Machine check exception polling timer started.
 Feb 20 18:05:32 darkstar kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
 Feb 20 18:05:32 darkstar kernel: apm: overridden by ACPI.
 Feb 20 18:05:32 darkstar kernel: VFS: Disk quotas dquot_6.5.1
 Feb 20 18:05:32 darkstar kernel: NTFS driver 2.1.22 [Flags: R/O].
 Feb 20 18:05:32 darkstar kernel: Initializing Cryptographic API
 Feb 20 18:05:32 darkstar kernel: isapnp: Scanning for PnP cards...
 Feb 20 18:05:32 darkstar kernel: isapnp: No Plug & Play device found
 Feb 20 18:05:32 darkstar kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
 Feb 20 18:05:32 darkstar kernel: N_HDLC line discipline registered.
 Feb 20 18:05:32 darkstar kernel: Real Time Clock Driver v1.12
 Feb 20 18:05:32 darkstar kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
 Feb 20 18:05:32 darkstar kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
 Feb 20 18:05:32 darkstar kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
 Feb 20 18:05:32 darkstar kernel: io scheduler noop registered
 Feb 20 18:05:32 darkstar kernel: io scheduler anticipatory registered
 Feb 20 18:05:32 darkstar kernel: io scheduler deadline registered
 Feb 20 18:05:32 darkstar kernel: io scheduler cfq registered
 Feb 20 18:05:32 darkstar kernel: elevator: using anticipatory as default io scheduler
 Feb 20 18:05:32 darkstar kernel: Floppy drive(s): fd0 is 1.44M
 Feb 20 18:05:32 darkstar kernel: FDC 0 is a post-1991 82077
 Feb 20 18:05:32 darkstar kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
 Feb 20 18:05:32 darkstar kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 Feb 20 18:05:32 darkstar kernel: hda: max request size: 128KiB
 Feb 20 18:05:32 darkstar kernel: hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63
 Feb 20 18:05:32 darkstar kernel: hda: hda1 hda2 hda3
 Feb 20 18:05:32 darkstar kernel: hdc: max request size: 128KiB
 Feb 20 18:05:32 darkstar kernel: hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
 Feb 20 18:05:32 darkstar kernel: hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 >
 Feb 20 18:05:32 darkstar kernel: Uniform CD-ROM driver Revision: 3.20
 Feb 20 18:05:32 darkstar kernel: usbcore: registered new driver usblp
 Feb 20 18:05:32 darkstar kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
 Feb 20 18:05:32 darkstar kernel: usbcore: registered new driver hiddev
 Feb 20 18:05:32 darkstar kernel: usbcore: registered new driver usbhid
 Feb 20 18:05:32 darkstar kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
 Feb 20 18:05:32 darkstar kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
 Feb 20 18:05:32 darkstar kernel: usbcore: registered new driver usbserial_generic
 Feb 20 18:05:32 darkstar kernel: usbcore: registered new driver usbserial
 Feb 20 18:05:32 darkstar kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
 Feb 20 18:05:32 darkstar kernel: mice: PS/2 mouse device common for all mice
 Feb 20 18:05:32 darkstar kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
 Feb 20 18:05:32 darkstar kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
 Feb 20 18:05:32 darkstar kernel: input: PC Speaker
 Feb 20 18:05:32 darkstar kernel: NET: Registered protocol family 2
 Feb 20 18:05:32 darkstar kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
 Feb 20 18:05:32 darkstar kernel: TCP: Hash tables configured (established 32768 bind 65536)
 Feb 20 18:05:32 darkstar kernel: Initializing IPsec netlink socket
 Feb 20 18:05:32 darkstar kernel: NET: Registered protocol family 1
 Feb 20 18:05:32 darkstar kernel: NET: Registered protocol family 17
 Feb 20 18:05:32 darkstar kernel: ACPI: (supports S0 S1 S4 S5)
 Feb 20 18:05:32 darkstar kernel: kjournald starting. Commit interval 5 seconds
 Feb 20 18:05:32 darkstar kernel: EXT3-fs: mounted filesystem with ordered data mode.
 Feb 20 18:05:32 darkstar kernel: Freeing unused kernel memory: 160k freed
 Feb 20 18:05:32 darkstar kernel: EXT3 FS on hdc1, internal journal
 Feb 20 18:05:32 darkstar kernel: Linux agpgart interface v0.100 (c) Dave Jones
 Feb 20 18:05:32 darkstar logger: /etc/rc.d/rc.inet1: /sbin/ifconfig lo 127.0.0.1
 Feb 20 18:05:32 darkstar logger: /etc/rc.d/rc.inet1: /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
 Feb 20 18:05:32 darkstar logger: /etc/rc.d/rc.hotplug start (entering script)
 Feb 20 18:05:33 darkstar kernel: VP_IDE: IDE controller at PCI slot 0000:00:11.1
 Feb 20 18:05:33 darkstar kernel: VP_IDE: chipset revision 6
 Feb 20 18:05:33 darkstar kernel: VP_IDE: not 100%% native mode: will probe irqs later
 Feb 20 18:05:33 darkstar kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
 Feb 20 18:05:33 darkstar kernel: VP_IDE: neither IDE port enabled (BIOS)
 Feb 20 18:05:33 darkstar kernel: ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 10 (level, low) -> IRQ 10
 Feb 20 18:05:33 darkstar kernel: ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
 Feb 20 18:05:33 darkstar kernel: ehci_hcd 0000:00:10.3: irq 10, pci mem 0xed800000
 Feb 20 18:05:33 darkstar kernel: ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
 Feb 20 18:05:33 darkstar kernel: ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
 Feb 20 18:05:33 darkstar kernel: hub 1-0:1.0: USB hub found
 Feb 20 18:05:33 darkstar kernel: hub 1-0:1.0: 6 ports detected
 Feb 20 18:05:33 darkstar kernel: USB Universal Host Controller Interface driver v2.2
 Feb 20 18:05:33 darkstar kernel: ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low) -> IRQ 10
 Feb 20 18:05:33 darkstar kernel: uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
 Feb 20 18:05:33 darkstar kernel: uhci_hcd 0000:00:10.0: irq 10, io base 0xd800
 Feb 20 18:05:33 darkstar kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
 Feb 20 18:05:33 darkstar kernel: hub 2-0:1.0: USB hub found
 Feb 20 18:05:33 darkstar kernel: hub 2-0:1.0: 2 ports detected
 Feb 20 18:05:33 darkstar usb.agent[2509]: ... no modules for USB product 0/0/206
 Feb 20 18:05:33 darkstar usb.agent[2589]: ... no modules for USB product 0/0/206
 Feb 20 18:05:33 darkstar kernel: ACPI: PCI interrupt 0000:00:10.1 -> GSI 10 (level, low) -> IRQ 10
 Feb 20 18:05:33 darkstar kernel: uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
 Feb 20 18:05:33 darkstar kernel: uhci_hcd 0000:00:10.1: irq 10, io base 0xd400
 Feb 20 18:05:33 darkstar kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
 Feb 20 18:05:34 darkstar usb.agent[2634]: ... no modules for USB product 0/0/206
 Feb 20 18:05:34 darkstar kernel: hub 3-0:1.0: USB hub found
 Feb 20 18:05:34 darkstar kernel: hub 3-0:1.0: 2 ports detected
 Feb 20 18:05:34 darkstar kernel: ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 10 (level, low) -> IRQ 10
 Feb 20 18:05:34 darkstar kernel: uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
 Feb 20 18:05:34 darkstar kernel: uhci_hcd 0000:00:10.2: irq 10, io base 0xd000
 Feb 20 18:05:34 darkstar kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
 Feb 20 18:05:34 darkstar udev[2657]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:34 darkstar udev[2657]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:34 darkstar udev[2657]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:34 darkstar udev[2714]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:34 darkstar udev[2670]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 56 applied, ´event0´ becomes ´input/%k´
 Feb 20 18:05:34 darkstar udev[2670]: creating device node ´/dev/input/event0´
 Feb 20 18:05:34 darkstar udev[2658]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:34 darkstar udev[2658]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:34 darkstar udev[2658]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:34 darkstar udev[2671]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 56 applied, ´event1´ becomes ´input/%k´
 Feb 20 18:05:34 darkstar udev[2671]: creating device node ´/dev/input/event1´
 Feb 20 18:05:34 darkstar udev[2672]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 56 applied, ´event2´ becomes ´input/%k´
 Feb 20 18:05:34 darkstar udev[2726]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:34 darkstar udev[2672]: creating device node ´/dev/input/event2´
 Feb 20 18:05:34 darkstar kernel: hub 4-0:1.0: USB hub found
 Feb 20 18:05:34 darkstar kernel: hub 4-0:1.0: 2 ports detected
 Feb 20 18:05:34 darkstar udev[2715]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:34 darkstar udev[2715]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:34 darkstar udev[2715]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:34 darkstar udev[2730]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:34 darkstar udev[2727]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:34 darkstar udev[2727]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:34 darkstar udev[2727]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:34 darkstar udev[2732]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:34 darkstar usb.agent[2706]: ... no modules for USB product 0/0/206
 Feb 20 18:05:34 darkstar udev[2731]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:34 darkstar udev[2731]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:34 darkstar udev[2731]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:34 darkstar udev[2813]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:34 darkstar udev[2733]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:34 darkstar udev[2733]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:34 darkstar udev[2733]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:34 darkstar udev[2822]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:34 darkstar kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2
 Feb 20 18:05:34 darkstar udev[2814]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:34 darkstar udev[2814]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:34 darkstar udev[2814]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:34 darkstar udev[2906]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:34 darkstar udev[2823]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:34 darkstar udev[2823]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:34 darkstar udev[2823]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:34 darkstar udev[2915]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:34 darkstar kernel: hub 2-1:1.0: USB hub found
 Feb 20 18:05:34 darkstar kernel: hub 2-1:1.0: 4 ports detected
 Feb 20 18:05:34 darkstar udev[2907]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:34 darkstar udev[2907]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:34 darkstar udev[2907]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:34 darkstar udev[3015]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:34 darkstar udev[2916]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:34 darkstar udev[2916]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:34 darkstar udev[2916]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:34 darkstar udev[3018]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3016]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3016]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:35 darkstar udev[3016]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3022]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3019]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3019]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:35 darkstar udev[3019]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3024]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar usb.agent[2921]: ... no modules for USB product 0/e01/4
 Feb 20 18:05:35 darkstar udev[3023]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3023]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:35 darkstar udev[3023]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3080]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3027]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3027]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:35 darkstar udev[3027]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3121]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar kernel: usb 2-2: new full speed USB device using uhci_hcd and address 3
 Feb 20 18:05:35 darkstar udev[3081]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3081]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:35 darkstar udev[3081]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3167]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3122]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3122]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:35 darkstar udev[3122]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3197]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3168]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3168]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:35 darkstar udev[3168]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3231]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3198]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3198]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:35 darkstar udev[3198]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3238]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3232]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3232]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:35 darkstar udev[3232]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3242]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar usb.agent[3213]: ... no modules for USB product 8ea/ca/100
 Feb 20 18:05:35 darkstar udev[3239]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3239]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:35 darkstar udev[3239]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3255]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3245]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3245]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:35 darkstar udev[3245]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3279]: removing device node ´/dev/vcc/1´
 Feb 20 18:05:35 darkstar udev[3256]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3256]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:35 darkstar udev[3256]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3281]: removing device node ´/dev/vcc/a1´
 Feb 20 18:05:35 darkstar udev[3280]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:05:35 darkstar udev[3280]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:05:35 darkstar udev[3280]: creating device node ´/dev/vcc/1´
 Feb 20 18:05:36 darkstar udev[3282]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:05:36 darkstar udev[3282]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:05:36 darkstar udev[3282]: creating device node ´/dev/vcc/a1´
 Feb 20 18:05:36 darkstar kernel: usb 2-1.1: new full speed USB device using uhci_hcd and address 4
 Feb 20 18:05:36 darkstar usb.agent[3303]: ... no modules for USB product 4a9/105c/106
 Feb 20 18:05:36 darkstar kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x105C
 Feb 20 18:05:36 darkstar kernel: usb 2-1.2: new full speed USB device using uhci_hcd and address 5
 Feb 20 18:05:39 darkstar usb.agent[3271]: ... no modules for USB product 0/0/0
 Feb 20 18:05:42 darkstar usb.agent[3414]: ... no modules for USB product 0/0/0
 Feb 20 18:05:45 darkstar usb.agent[3436]: ... no modules for USB product 0/0/0
 Feb 20 18:05:48 darkstar usb.agent[3458]: ... no modules for USB product 0/0/0
 Feb 20 18:05:48 darkstar udev[3397]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 113 applied, ´lp0´ becomes ´usb/%k´
 Feb 20 18:05:48 darkstar udev[3397]: creating device node ´/dev/usb/lp0´
 Feb 20 18:05:51 darkstar usb.agent[3480]: ... no modules for USB product 0/0/0
 Feb 20 18:05:54 darkstar usb.agent[3502]: ... no modules for USB product 0/0/0
 Feb 20 18:05:55 darkstar logger: /etc/rc.d/rc.hotplug start (exiting script)
 Feb 20 18:05:56 darkstar kernel: NET: Registered protocol family 10
 Feb 20 18:05:56 darkstar kernel: Disabled Privacy Extensions on device c03b11e0(lo)
 Feb 20 18:05:56 darkstar kernel: IPv6 over IPv4 tunneling driver
 Feb 20 18:05:56 darkstar sshd[3538]: Server listening on :: port 22.
 Feb 20 18:06:24 darkstar /usr/sbin/gpm[3674]: imps2: Auto-detected intellimouse PS/2
 Feb 20 18:06:25 darkstar udev[3689]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:06:25 darkstar udev[3689]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs2´ becomes ´vcc/%n´
 Feb 20 18:06:25 darkstar udev[3689]: creating device node ´/dev/vcc/2´
 Feb 20 18:06:25 darkstar udev[3697]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:06:25 darkstar udev[3697]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs3´ becomes ´vcc/%n´
 Feb 20 18:06:25 darkstar udev[3697]: creating device node ´/dev/vcc/3´
 Feb 20 18:06:25 darkstar udev[3705]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:06:25 darkstar udev[3705]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs4´ becomes ´vcc/%n´
 Feb 20 18:06:25 darkstar udev[3705]: creating device node ´/dev/vcc/4´
 Feb 20 18:06:25 darkstar udev[3713]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:06:25 darkstar udev[3713]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa3´ becomes ´vcc/a%n´
 Feb 20 18:06:25 darkstar udev[3713]: creating device node ´/dev/vcc/a3´
 Feb 20 18:06:25 darkstar udev[3721]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:06:25 darkstar udev[3721]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa2´ becomes ´vcc/a%n´
 Feb 20 18:06:25 darkstar udev[3721]: creating device node ´/dev/vcc/a2´
 Feb 20 18:06:25 darkstar udev[3729]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:06:25 darkstar udev[3729]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs5´ becomes ´vcc/%n´
 Feb 20 18:06:25 darkstar udev[3729]: creating device node ´/dev/vcc/5´
 Feb 20 18:06:25 darkstar udev[3737]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:06:25 darkstar udev[3737]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa4´ becomes ´vcc/a%n´
 Feb 20 18:06:25 darkstar udev[3737]: creating device node ´/dev/vcc/a4´
 Feb 20 18:06:25 darkstar udev[3745]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:06:25 darkstar udev[3745]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs6´ becomes ´vcc/%n´
 Feb 20 18:06:25 darkstar udev[3745]: creating device node ´/dev/vcc/6´
 Feb 20 18:06:25 darkstar udev[3753]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:06:25 darkstar udev[3753]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa5´ becomes ´vcc/a%n´
 Feb 20 18:06:25 darkstar udev[3753]: creating device node ´/dev/vcc/a5´
 Feb 20 18:06:25 darkstar udev[3761]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:06:25 darkstar udev[3761]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa6´ becomes ´vcc/a%n´
 Feb 20 18:06:25 darkstar udev[3761]: creating device node ´/dev/vcc/a6´
 
 Feb 20 18:07:33 darkstar sudo: root : TTY=vc/1 ; PWD=/usr/src/realtime-lsm-0.1.1 ; USER=root ; COMMAND=/usr/bin/make modules_install
 Feb 20 18:09:22 darkstar init: Switching to runlevel: 6
 Feb 20 18:09:22 darkstar udev[5263]: removing device node ´/dev/vcc/2´
 Feb 20 18:09:22 darkstar udev[5271]: removing device node ´/dev/vcc/a2´
 Feb 20 18:09:22 darkstar udev[5279]: removing device node ´/dev/vcc/3´
 Feb 20 18:09:22 darkstar udev[5287]: removing device node ´/dev/vcc/a3´
 Feb 20 18:09:22 darkstar udev[5295]: removing device node ´/dev/vcc/4´
 Feb 20 18:09:22 darkstar udev[5303]: removing device node ´/dev/vcc/a4´
 Feb 20 18:09:22 darkstar udev[5311]: removing device node ´/dev/vcc/5´
 Feb 20 18:09:22 darkstar udev[5319]: removing device node ´/dev/vcc/a5´
 Feb 20 18:09:22 darkstar udev[5334]: removing device node ´/dev/vcc/6´
 Feb 20 18:09:22 darkstar udev[5335]: removing device node ´/dev/vcc/a6´
 Feb 20 18:09:31 darkstar exiting on signal 15
 Feb 20 18:10:18 darkstar syslogd 1.4.1: restart.
 Feb 20 18:10:18 darkstar udev[2145]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:10:18 darkstar udev[2145]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:10:18 darkstar udev[2145]: creating device node ´/dev/vcc/1´
 Feb 20 18:10:18 darkstar udev[2304]: removing device node ´/dev/vcc/1´
 Feb 20 18:10:18 darkstar udev[2153]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:10:18 darkstar udev[2153]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:10:18 darkstar udev[2153]: creating device node ´/dev/vcc/a1´
 Feb 20 18:10:18 darkstar udev[2306]: removing device node ´/dev/vcc/a1´
 Feb 20 18:10:18 darkstar udev[2305]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:10:18 darkstar udev[2305]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:10:18 darkstar udev[2305]: creating device node ´/dev/vcc/1´
 Feb 20 18:10:18 darkstar udev[2308]: removing device node ´/dev/vcc/1´
 Feb 20 18:10:18 darkstar udev[2307]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:10:18 darkstar udev[2307]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:10:18 darkstar udev[2307]: creating device node ´/dev/vcc/a1´
 Feb 20 18:10:18 darkstar udev[2310]: removing device node ´/dev/vcc/a1´
 Feb 20 18:10:18 darkstar udev[2309]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:10:18 darkstar udev[2309]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:10:18 darkstar udev[2309]: creating device node ´/dev/vcc/1´
 Feb 20 18:10:18 darkstar udev[2312]: removing device node ´/dev/vcc/1´
 Feb 20 18:10:18 darkstar udev[2311]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:10:18 darkstar udev[2311]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:10:18 darkstar udev[2311]: creating device node ´/dev/vcc/a1´
 Feb 20 18:10:18 darkstar udev[2314]: removing device node ´/dev/vcc/a1´
 Feb 20 18:10:19 darkstar udev[2313]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:10:19 darkstar udev[2313]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:10:19 darkstar udev[2313]: creating device node ´/dev/vcc/1´
 Feb 20 18:10:19 darkstar udev[2316]: removing device node ´/dev/vcc/1´
 Feb 20 18:10:19 darkstar udev[2315]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:10:19 darkstar udev[2315]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:10:19 darkstar udev[2315]: creating device node ´/dev/vcc/a1´
 Feb 20 18:10:19 darkstar udev[2318]: removing device node ´/dev/vcc/a1´
 Feb 20 18:10:19 darkstar udev[2317]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:10:19 darkstar udev[2317]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:10:19 darkstar udev[2317]: creating device node ´/dev/vcc/1´
 Feb 20 18:10:19 darkstar udev[2320]: removing device node ´/dev/vcc/1´
 Feb 20 18:10:19 darkstar udev[2319]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:10:19 darkstar udev[2319]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:10:19 darkstar udev[2319]: creating device node ´/dev/vcc/a1´
 Feb 20 18:10:19 darkstar udev[2322]: removing device node ´/dev/vcc/a1´
 Feb 20 18:10:19 darkstar udev[2321]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:10:19 darkstar udev[2321]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs1´ becomes ´vcc/%n´
 Feb 20 18:10:19 darkstar udev[2321]: creating device node ´/dev/vcc/1´
 Feb 20 18:10:19 darkstar udev[2323]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:10:19 darkstar udev[2323]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa1´ becomes ´vcc/a%n´
 Feb 20 18:10:19 darkstar udev[2323]: creating device node ´/dev/vcc/a1´
 Feb 20 18:10:19 darkstar kernel: klogd 1.4.1, log source = /proc/kmsg started.
 Feb 20 18:10:19 darkstar kernel: BIOS-provided physical RAM map:
 Feb 20 18:10:19 darkstar kernel: 511MB LOWMEM available.
 Feb 20 18:10:19 darkstar kernel: DMI 2.3 present.
 Feb 20 18:10:19 darkstar kernel: ACPI: PM-Timer IO Port: 0xe408
 Feb 20 18:10:19 darkstar kernel: Initializing CPU#0
 Feb 20 18:10:19 darkstar kernel: Using pmtmr for high-res timesource
 Feb 20 18:10:19 darkstar kernel: Memory: 515444k/524272k available (2096k kernel code, 8240k reserved, 860k data, 160k init, 0k highmem)
 Feb 20 18:10:19 darkstar kernel: Security Framework v1.0.0 initialized
 Feb 20 18:10:19 darkstar kernel: SELinux: Initializing.
 Feb 20 18:10:19 darkstar kernel: SELinux: Starting in permissive mode
 Feb 20 18:10:19 darkstar kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 Feb 20 18:10:19 darkstar kernel: CPU: L2 Cache: 512K (64 bytes/line)
 Feb 20 18:10:19 darkstar kernel: Intel machine check architecture supported.
 Feb 20 18:10:19 darkstar kernel: Intel machine check reporting enabled on CPU#0.
 Feb 20 18:10:19 darkstar kernel: Enabling fast FPU save and restore... done.
 Feb 20 18:10:19 darkstar kernel: Enabling unmasked SIMD FPU exception support... done.
 Feb 20 18:10:19 darkstar kernel: Checking ´hlt´ instruction... OK.
 Feb 20 18:10:19 darkstar kernel: NET: Registered protocol family 16
 Feb 20 18:10:19 darkstar kernel: PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
 Feb 20 18:10:19 darkstar kernel: PCI: Using configuration type 1
 Feb 20 18:10:19 darkstar kernel: ACPI: Subsystem revision 20041105
 Feb 20 18:10:19 darkstar kernel: ACPI: Interpreter enabled
 Feb 20 18:10:19 darkstar kernel: ACPI: Using PIC for interrupt routing
 Feb 20 18:10:19 darkstar kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
 Feb 20 18:10:19 darkstar kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
 Feb 20 18:10:19 darkstar kernel: pnp: PnP ACPI init
 Feb 20 18:10:19 darkstar kernel: pnp: PnP ACPI: found 14 devices
 Feb 20 18:10:19 darkstar kernel: SCSI subsystem initialized
 Feb 20 18:10:19 darkstar kernel: usbcore: registered new driver usbfs
 Feb 20 18:10:19 darkstar kernel: usbcore: registered new driver hub
 Feb 20 18:10:19 darkstar kernel: PCI: Using ACPI for IRQ routing
 Feb 20 18:10:19 darkstar kernel: ** PCI interrupts are no longer routed automatically. If this
 Feb 20 18:10:19 darkstar kernel: ** causes a device to stop working, it is probably because the
 Feb 20 18:10:19 darkstar kernel: ** driver failed to call pci_enable_device(). As a temporary
 Feb 20 18:10:19 darkstar kernel: ** workaround, the "pci=routeirq" argument restores the old
 Feb 20 18:10:19 darkstar kernel: ** behavior. If this argument makes the device work again,
 Feb 20 18:10:19 darkstar kernel: ** please email the output of "lspci" to <a href="mailto:bjorn.helgaas@hp.com" target="_new">bjorn.helgaas@hp.com</a>
 Feb 20 18:10:19 darkstar kernel: ** so I can fix the driver.
 Feb 20 18:10:19 darkstar kernel: pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
 Feb 20 18:10:19 darkstar kernel: pnp: 00:01: ioport range 0xe800-0xe81f has been reserved
 Feb 20 18:10:19 darkstar kernel: pnp: 00:0d: ioport range 0x290-0x297 has been reserved
 Feb 20 18:10:19 darkstar kernel: pnp: 00:0d: ioport range 0x370-0x375 has been reserved
 Feb 20 18:10:19 darkstar kernel: Simple Boot Flag at 0x3a set to 0x1
 Feb 20 18:10:19 darkstar kernel: Machine check exception polling timer started.
 Feb 20 18:10:19 darkstar kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
 Feb 20 18:10:19 darkstar kernel: apm: overridden by ACPI.
 Feb 20 18:10:19 darkstar kernel: VFS: Disk quotas dquot_6.5.1
 Feb 20 18:10:19 darkstar kernel: NTFS driver 2.1.22 [Flags: R/O].
 Feb 20 18:10:19 darkstar kernel: Initializing Cryptographic API
 Feb 20 18:10:19 darkstar kernel: isapnp: Scanning for PnP cards...
 Feb 20 18:10:19 darkstar kernel: isapnp: No Plug & Play device found
 Feb 20 18:10:19 darkstar kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
 Feb 20 18:10:19 darkstar kernel: N_HDLC line discipline registered.
 Feb 20 18:10:19 darkstar kernel: Real Time Clock Driver v1.12
 Feb 20 18:10:19 darkstar kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
 Feb 20 18:10:19 darkstar kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
 Feb 20 18:10:19 darkstar kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
 Feb 20 18:10:19 darkstar kernel: io scheduler noop registered
 Feb 20 18:10:19 darkstar kernel: io scheduler anticipatory registered
 Feb 20 18:10:19 darkstar kernel: io scheduler deadline registered
 Feb 20 18:10:19 darkstar kernel: io scheduler cfq registered
 Feb 20 18:10:19 darkstar kernel: elevator: using anticipatory as default io scheduler
 Feb 20 18:10:19 darkstar kernel: Floppy drive(s): fd0 is 1.44M
 Feb 20 18:10:19 darkstar kernel: FDC 0 is a post-1991 82077
 Feb 20 18:10:19 darkstar kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
 Feb 20 18:10:19 darkstar kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 Feb 20 18:10:19 darkstar kernel: hda: max request size: 128KiB
 Feb 20 18:10:19 darkstar kernel: hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63
 Feb 20 18:10:19 darkstar kernel: hda: hda1 hda2 hda3
 Feb 20 18:10:19 darkstar kernel: hdc: max request size: 128KiB
 Feb 20 18:10:19 darkstar kernel: hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
 Feb 20 18:10:19 darkstar kernel: hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 >
 Feb 20 18:10:19 darkstar kernel: Uniform CD-ROM driver Revision: 3.20
 Feb 20 18:10:19 darkstar kernel: usbcore: registered new driver usblp
 Feb 20 18:10:19 darkstar kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
 Feb 20 18:10:19 darkstar kernel: usbcore: registered new driver hiddev
 Feb 20 18:10:19 darkstar kernel: usbcore: registered new driver usbhid
 Feb 20 18:10:19 darkstar kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
 Feb 20 18:10:19 darkstar kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
 Feb 20 18:10:19 darkstar kernel: usbcore: registered new driver usbserial_generic
 Feb 20 18:10:19 darkstar kernel: usbcore: registered new driver usbserial
 Feb 20 18:10:19 darkstar kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
 Feb 20 18:10:19 darkstar kernel: mice: PS/2 mouse device common for all mice
 Feb 20 18:10:19 darkstar kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
 Feb 20 18:10:19 darkstar kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
 Feb 20 18:10:19 darkstar kernel: input: PC Speaker
 Feb 20 18:10:19 darkstar kernel: NET: Registered protocol family 2
 Feb 20 18:10:19 darkstar kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
 Feb 20 18:10:19 darkstar kernel: TCP: Hash tables configured (established 32768 bind 65536)
 Feb 20 18:10:19 darkstar kernel: Initializing IPsec netlink socket
 Feb 20 18:10:19 darkstar kernel: NET: Registered protocol family 1
 Feb 20 18:10:19 darkstar kernel: NET: Registered protocol family 17
 Feb 20 18:10:19 darkstar kernel: ACPI: (supports S0 S1 S4 S5)
 Feb 20 18:10:19 darkstar kernel: kjournald starting. Commit interval 5 seconds
 Feb 20 18:10:19 darkstar kernel: EXT3-fs: mounted filesystem with ordered data mode.
 Feb 20 18:10:19 darkstar kernel: Freeing unused kernel memory: 160k freed
 Feb 20 18:10:19 darkstar kernel: EXT3 FS on hdc1, internal journal
 Feb 20 18:10:19 darkstar kernel: Linux agpgart interface v0.100 (c) Dave Jones
 Feb 20 18:10:19 darkstar logger: /etc/rc.d/rc.inet1: /sbin/ifconfig lo 127.0.0.1
 Feb 20 18:10:19 darkstar logger: /etc/rc.d/rc.inet1: /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
 Feb 20 18:10:19 darkstar logger: /etc/rc.d/rc.hotplug start (entering script)
 Feb 20 18:10:19 darkstar kernel: VP_IDE: IDE controller at PCI slot 0000:00:11.1
 Feb 20 18:10:19 darkstar kernel: VP_IDE: chipset revision 6
 Feb 20 18:10:19 darkstar kernel: VP_IDE: not 100%% native mode: will probe irqs later
 Feb 20 18:10:19 darkstar kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
 Feb 20 18:10:19 darkstar kernel: VP_IDE: neither IDE port enabled (BIOS)
 Feb 20 18:10:20 darkstar kernel: ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 10 (level, low) -> IRQ 10
 Feb 20 18:10:20 darkstar kernel: ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
 Feb 20 18:10:20 darkstar kernel: ehci_hcd 0000:00:10.3: irq 10, pci mem 0xed800000
 Feb 20 18:10:20 darkstar kernel: ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
 Feb 20 18:10:20 darkstar kernel: ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
 Feb 20 18:10:20 darkstar kernel: hub 1-0:1.0: USB hub found
 Feb 20 18:10:20 darkstar kernel: hub 1-0:1.0: 6 ports detected
 Feb 20 18:10:20 darkstar kernel: USB Universal Host Controller Interface driver v2.2
 Feb 20 18:10:20 darkstar kernel: ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low) -> IRQ 10
 Feb 20 18:10:20 darkstar kernel: uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
 Feb 20 18:10:20 darkstar kernel: uhci_hcd 0000:00:10.0: irq 10, io base 0xd800
 Feb 20 18:10:20 darkstar kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
 Feb 20 18:10:20 darkstar kernel: hub 2-0:1.0: USB hub found
 Feb 20 18:10:20 darkstar kernel: hub 2-0:1.0: 2 ports detected
 Feb 20 18:10:20 darkstar usb.agent[2582]: ... no modules for USB product 0/0/206
 Feb 20 18:10:20 darkstar usb.agent[2659]: ... no modules for USB product 0/0/206
 Feb 20 18:10:20 darkstar kernel: ACPI: PCI interrupt 0000:00:10.1 -> GSI 10 (level, low) -> IRQ 10
 Feb 20 18:10:20 darkstar kernel: uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
 Feb 20 18:10:20 darkstar kernel: uhci_hcd 0000:00:10.1: irq 10, io base 0xd400
 Feb 20 18:10:20 darkstar kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
 Feb 20 18:10:20 darkstar udev[2405]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 56 applied, ´event0´ becomes ´input/%k´
 Feb 20 18:10:20 darkstar udev[2405]: creating device node ´/dev/input/event0´
 Feb 20 18:10:20 darkstar kernel: hub 3-0:1.0: USB hub found
 Feb 20 18:10:20 darkstar kernel: hub 3-0:1.0: 2 ports detected
 Feb 20 18:10:20 darkstar kernel: ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 10 (level, low) -> IRQ 10
 Feb 20 18:10:20 darkstar kernel: uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
 Feb 20 18:10:20 darkstar udev[2421]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 56 applied, ´event1´ becomes ´input/%k´
 Feb 20 18:10:20 darkstar udev[2421]: creating device node ´/dev/input/event1´
 Feb 20 18:10:20 darkstar udev[2437]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 56 applied, ´event2´ becomes ´input/%k´
 Feb 20 18:10:20 darkstar udev[2437]: creating device node ´/dev/input/event2´
 Feb 20 18:10:20 darkstar usb.agent[2702]: ... no modules for USB product 0/0/206
 Feb 20 18:10:21 darkstar kernel: uhci_hcd 0000:00:10.2: irq 10, io base 0xd000
 Feb 20 18:10:21 darkstar kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
 Feb 20 18:10:21 darkstar kernel: hub 4-0:1.0: USB hub found
 Feb 20 18:10:21 darkstar kernel: hub 4-0:1.0: 2 ports detected
 Feb 20 18:10:21 darkstar usb.agent[2746]: ... no modules for USB product 0/0/206
 Feb 20 18:10:21 darkstar kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2
 Feb 20 18:10:21 darkstar usb.agent[2906]: ... no modules for USB product 0/e01/4
 Feb 20 18:10:21 darkstar kernel: hub 2-1:1.0: USB hub found
 Feb 20 18:10:21 darkstar kernel: hub 2-1:1.0: 4 ports detected
 Feb 20 18:10:22 darkstar kernel: usb 2-2: new full speed USB device using uhci_hcd and address 3
 Feb 20 18:10:22 darkstar usb.agent[3244]: ... no modules for USB product 8ea/ca/100
 Feb 20 18:10:22 darkstar kernel: usb 2-1.1: new full speed USB device using uhci_hcd and address 4
 Feb 20 18:10:23 darkstar usb.agent[3308]: ... no modules for USB product 4a9/105c/106
 Feb 20 18:10:23 darkstar kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x105C
 Feb 20 18:10:23 darkstar kernel: usb 2-1.2: new full speed USB device using uhci_hcd and address 5
 Feb 20 18:10:25 darkstar usb.agent[3280]: ... no modules for USB product 0/0/0
 Feb 20 18:10:28 darkstar usb.agent[3417]: ... no modules for USB product 0/0/0
 Feb 20 18:10:32 darkstar usb.agent[3439]: ... no modules for USB product 0/0/0
 Feb 20 18:10:35 darkstar udev[3398]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 113 applied, ´lp0´ becomes ´usb/%k´
 Feb 20 18:10:35 darkstar udev[3398]: creating device node ´/dev/usb/lp0´
 Feb 20 18:10:35 darkstar usb.agent[3461]: ... no modules for USB product 0/0/0
 Feb 20 18:10:38 darkstar usb.agent[3483]: ... no modules for USB product 0/0/0
 Feb 20 18:10:41 darkstar usb.agent[3505]: ... no modules for USB product 0/0/0
 Feb 20 18:10:41 darkstar logger: /etc/rc.d/rc.hotplug start (exiting script)
 Feb 20 18:10:42 darkstar kernel: NET: Registered protocol family 10
 Feb 20 18:10:42 darkstar kernel: Disabled Privacy Extensions on device c03b11e0(lo)
 Feb 20 18:10:42 darkstar kernel: IPv6 over IPv4 tunneling driver
 Feb 20 18:10:42 darkstar sshd[3541]: Server listening on :: port 22.
 Feb 20 18:11:10 darkstar /usr/sbin/gpm[3677]: imps2: Auto-detected intellimouse PS/2
 Feb 20 18:11:11 darkstar udev[3692]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:11:11 darkstar udev[3692]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs2´ becomes ´vcc/%n´
 Feb 20 18:11:11 darkstar udev[3692]: creating device node ´/dev/vcc/2´
 Feb 20 18:11:11 darkstar udev[3700]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:11:11 darkstar udev[3700]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, ´vcs3´ becomes ´vcc/%n´
 Feb 20 18:11:11 darkstar udev[3700]: creating device node ´/dev/vcc/3´
 Feb 20 18:11:11 darkstar udev[3708]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, added symlink ´%k´
 Feb 20 18:11:11 darkstar udev[3708]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 100 applied, ´vcsa2´ becomes ´vcc/a%n´
 Feb 20 18:11:11 darkstar udev[3708]: creating device node ´/dev/vcc/a2´
 Feb 20 18:11:11 darkstar udev[3716]: configured rule in ´/etc/udev/rules.d/udev.rules´ at line 98 applied, added symlink ´%k´
 Feb 20 18:11:11 darkstar udev

Messaggio da **gianPrazio** » dom 20 feb 2005, 19:08 · dom 20 feb 2005, 19:08

nvidia o kernel-2.6.10?

Cita

Messaggio da gianPrazio » dom 20 feb 2005, 19:08

Il sistema si pianta subito dopo aver creato /dev/nvidia?

Messaggio da **goldy** » dom 20 feb 2005, 19:14 · dom 20 feb 2005, 19:14

nvidia o kernel-2.6.10?

Cita

Messaggio da goldy » dom 20 feb 2005, 19:14

Allora ho fatto questo
 All´avvio arrivo alla shell
 digito startx
 parte kde
 tempo 10 secondi
 e mi si blocca il mouse , la tastiera e si
 pianta il sistema.
 Però questo non è accaduto
 prima di installare i driver nvidia.
 
 Anche io ho pensato
 ad un conflitto hardware
 visto che suse 9.2 appena installata
 mi ha fatto lo stesso problema
 e suse di default non usa i driver ufficiali della
 nvidia , però windows ve bene , se il problema
 è hardware non dovrebbe piantarsi anche windows?

Messaggio da **UnoQualunque** » dom 20 feb 2005, 19:35 · dom 20 feb 2005, 19:35

nvidia o kernel-2.6.10?

Cita

Messaggio da UnoQualunque » dom 20 feb 2005, 19:35

Scusami.. prova ad editare xorg.conf caricando i driver nv invece di nvidia.
 
 Così almeno si è sicuri al 100% che si tratta esclusivamente dei driver nvidia.
 
 comunque uso anch´io senza problemi i driver nvidia con il kernel 2.6.10

Messaggio da **goldy** » dom 20 feb 2005, 21:00 · dom 20 feb 2005, 21:00

nvidia o kernel-2.6.10?

Cita

Messaggio da goldy » dom 20 feb 2005, 21:00

Ho provato a mettere nv
 ma il problema persiste.
 A questo punto che posso fare?

Messaggio da **gianPrazio** » dom 20 feb 2005, 21:06 · dom 20 feb 2005, 21:06

nvidia o kernel-2.6.10?

Cita

Messaggio da gianPrazio » dom 20 feb 2005, 21:06

Il problema potrebbe essere dato dal server X: prova a postare il contenuto di /var/log/Xorg.0.log... almeno cosi´ vediamo che messaggi ti da´ poco prima di piantare tutto.

Messaggio da **goldy** » dom 20 feb 2005, 23:16 · dom 20 feb 2005, 23:16

nvidia o kernel-2.6.10?

Cita

Messaggio da goldy » dom 20 feb 2005, 23:16

Questo è il file di xorg
 posto solo
 le voci relative a nvidia e (WW) warning
 per il resto non ci sono errori
 
 
 ----------------
 
 (WW) `fonts.dir´ not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
 Entry deleted from font path.
 (Run ´mkfontdir´ on "/usr/X11R6/lib/X11/fonts/local/").
 (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
 
 (II) Setting vga for screen 0.
 (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
 (==) NVIDIA(0): RGB weight 888
 (==) NVIDIA(0): Default visual is TrueColor
 (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
 (--) NVIDIA(0): Linear framebuffer at 0xF0000000
 (--) NVIDIA(0): MMIO registers at 0xEE000000
 (II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 MX 440
 (--) NVIDIA(0): VideoBIOS: 04.17.00.63.42
 (--) NVIDIA(0): Interlaced video modes are supported on this GPU
 (WW) System lacks support for changing MTRRs
 (--) NVIDIA(0): VideoRAM: 65536 kBytes
 (II) NVIDIA(0): Connected display device(s): CRT-0, TV-0
 (WW) NVIDIA(0): Multiple displays connected, but only one display allowed;
 (WW) NVIDIA(0): using first display
 (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 350 MHz
 (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
 (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
 (II) Loading sub module "ddc"
 (II) LoadModule: "ddc"
 (II) Loading /usr/X11R6/lib/modules/libddc.a
 (II) Module ddc: vendor="X.Org Foundation"
 compiled for 6.7.0, module version = 1.0.0
 ABI class: X.Org Video Driver, version 0.7
 (II) Loading sub module "int10"
 (II) LoadModule: "int10"
 (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
 (II) Module int10: vendor="X.Org Foundation"
 compiled for 6.7.0, module version = 1.0.0
 ABI class: X.Org Video Driver, version 0.7
 (II) NVIDIA(0): Primary V_BIOS segment is: 0xc000
 (WW) NVIDIA(0): config file hsync range 31-64kHz not within DDC hsync ranges.
 (WW) NVIDIA(0): config file vrefresh range 50-60Hz not within DDC vrefresh ranges.
 (II) NVIDIA(0): My Monitor: Using hsync range of 31.00-64.00 kHz
 (II) NVIDIA(0): My Monitor: Using vrefresh range of 50.00-60.00 Hz
 (II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
 (II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "320x200" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "360x200" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "576x432" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "832x624" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "416x312" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
 (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
 (WW) NVIDIA(0): Not using mode "1152x768":
 (WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8
 (WW) NVIDIA(0): Not using mode "576x384":
 (WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
 (**) NVIDIA(0): Validated modes for display device CRT-0:
 (**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
 (**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
 (**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
 (**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
 (**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
 (**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
 (**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
 (**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
 (**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
 (**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
 (**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
 (**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
 (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
 (--) NVIDIA(0): Display dimensions: (310, 230) mm
 (--) NVIDIA(0): DPI set to (104, 113)
 (II) Loading sub module "fb"
 (II) LoadModule: "fb"
 (II) Loading /usr/X11R6/lib/modules/libfb.a
 (II) Module fb: vendor="X.Org Foundation"
 compiled for 6.7.0, module version = 1.0.0
 ABI class: X.Org ANSI C Emulation, version 0.2
 (II) Loading sub module "ramdac"
 (II) LoadModule: "ramdac"
 (II) Loading /usr/X11R6/lib/modules/libramdac.a
 (II) Module ramdac: vendor="X.Org Foundation"
 compiled for 6.7.0, module version = 0.1.0
 ABI class: X.Org Video Driver, version 0.7
 (--) Depth 24 pixmap format is 32 bpp
 (II) do I need RAC? No, I don´t.
 (II) resource ranges after preInit:
 [0] 0 0 0xef800000 - 0xef87ffff (0x80000) MX
 [1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX
 [2] 0 0 0xee000000 - 0xeeffffff (0x1000000) MX
 [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
 [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
 [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
 [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX
 [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
 [8] -1 0 0xed000000 - 0xed0000ff (0x100) MX
 [9] -1 0 0xed800000 - 0xed8000ff (0x100) MX
 [10] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
 [11] -1 0 0xef7e0000 - 0xef7fffff (0x20000) MX[B](B)
 [12] -1 0 0xef800000 - 0xef87ffff (0x80000) MX[B](B)
 [13] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
 [14] -1 0 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
 [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
 [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
 [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
 [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [20] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
 [21] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
 [22] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
 [23] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
 [24] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [25] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
 [26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
 [27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
 (II) NVIDIA(0): Setting mode "1280x1024"
 (II) Loading extension NV-GLX
 (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
 (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
 (==) NVIDIA(0): Backing store disabled
 (==) NVIDIA(0): Silken mouse enabled
 (II) Loading extension NV-CONTROL
 (==) RandR enabled
 (II) Initializing built-in extension MIT-SHM
 (II) Initializing built-in extension XInputExtension
 (II) Initializing built-in extension XTEST
 (II) Initializing built-in extension XKEYBOARD
 (II) Initializing built-in extension LBX
 (II) Initializing built-in extension XC-APPGROUP
 (II) Initializing built-in extension SECURITY
 (II) Initializing built-in extension XINERAMA
 (II) Initializing built-in extension XFree86-Bigfont
 (II) Initializing built-in extension RENDER
 (II) Initializing built-in extension RANDR
 (II) Initializing extension GLX
 (**) Option "Protocol" "IMPS/2"
 (**) Mouse1: Device: "/dev/input/mice"
 (**) Mouse1: Protocol: "IMPS/2"
 (**) Option "CorePointer"
 (**) Mouse1: Core Pointer
 (**) Option "Device" "/dev/input/mice"
 (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
 (**) Option "ZAxisMapping" "4 5"
 (**) Mouse1: ZAxisMapping: buttons 4 and 5
 (**) Mouse1: Buttons: 5
 (II) Keyboard "Keyboard1" handled by legacy driver
 (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
 (II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
 (II) Mouse1: ps2EnableDataReporting: succeeded
 Warning: font renderer for ".ttf" already registered at priority 0
 Warning: font renderer for ".TTF" already registered at priority 0
 Warning: font renderer for ".ttc" already registered at priority 0
 Warning: font renderer for ".TTC" already registered at priority 0
 Warning: font renderer for ".otf" already registered at priority 0
 Warning: font renderer for ".OTF" already registered at priority 0
 Warning: font renderer for ".otc" already registered at priority 0
 Warning: font renderer for ".OTC" already registered at priority 0
 Warning: font renderer for ".pfa" already registered at priority 0
 Warning: font renderer for ".PFA" already registered at priority 0
 Warning: font renderer for ".pfb" already registered at priority 0
 Warning: font renderer for ".PFB" already registered at priority 0
 Warning: font renderer for ".BDF" already registered at priority -10
 Warning: font renderer for ".PCF" already registered at priority -10
 Warning: font renderer for ".cid" already registered at priority 0
 Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
 --------
 
 Noto all´inizio questo
 (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
 potrebbe essere quelllo il problema?
 
 Ormai non so più che fare.
 Aggiungo che con i driver vesa
 non ho nessun problema
 vi ringrazio della pazienza
 
 [ Questo Messaggio è stato Modificato da: goldy il 21-02-2005 00:10 ]

Messaggio da **gianPrazio** » lun 21 feb 2005, 9:31 · lun 21 feb 2005, 9:31

nvidia o kernel-2.6.10?

Cita

Messaggio da gianPrazio » lun 21 feb 2005, 9:31

Non credo che il problema sia legato all´APM. Questo e´ solo un modulo di gestione dell´alimentazione: anche se ce l´hai disattivato, non penso che sia un problema, anche tenendo conto del fatto che da /var/log/messages ho visto che hai attivato il supporto per ACPI, che, da quello che ho potuto constatare, offre un migliore supporto di "power management" rispetto ad APM. Probabilmente il problema risiede in
 
 <code>
 (WW) NVIDIA(0): config file hsync range 31-64kHz not within DDC hsync ranges.
 (WW) NVIDIA(0): config file vrefresh range 50-60Hz not within DDC vrefresh ranges.
 </code>
 
 oppure in
 
 <code>
 (WW) NVIDIA(0): Not using mode "1152x768":
 (WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8
 (WW) NVIDIA(0): Not using mode "576x384":
 (WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
 </code>
 
 Quello che non ho capito e´ se il kernel si pianta definitivamente o se crepa solo il server X11: quando ti si blocca tutto quanto, con CTRL+Backspace riesci a tornare al terminale testuale? oppure con la combinazione CTRL+ALT+F2 riesci a passare al secondo terminale testuale?

Messaggio da **albatrosla** » lun 21 feb 2005, 11:10 · lun 21 feb 2005, 11:10

nvidia o kernel-2.6.10?

Cita

Messaggio da albatrosla » lun 21 feb 2005, 11:10

Blocchi inavvertiti del problema possono anche essere dovuti alla ram. Può essere che windows non la usi quanto linux, o che lo faccia in modo diverso. Se hai più di un banco, prova ad avviare la macchina con uno solo dei due, e fare altrettanto con quello che hai rimosso. Così ti levi il pensiero che non sia la ram guasta (credimi, non è una cosa così infrequente...).
 
 Albatros_.la aka AsPh4lTo

Messaggio da **goldy** » lun 21 feb 2005, 14:34 · lun 21 feb 2005, 14:34

nvidia o kernel-2.6.10?

Cita

Messaggio da goldy » lun 21 feb 2005, 14:34

Intanto vi ringrazio per le risposte....
 il problema è comunque un conflitto
 hardware tra scheda video nvidia geforce mx440
 e scheda madre asus a7v8x-x , quindi
 kernel (ne avevo provati diversi) e driver nvidia
 sono innocenti.
 Ho contattato nvidia , che tra l´altro mi
 ha dato un valido supporto anche per
 Linux , e ha confermato questo conflitto
 hardware con i driver del pinguino.
 
 Ho seguito le loro istruzioni , compreso
 l´aggiornamento del bios , e alcuni settaggi
 da mettere nel bios della scheda madre, il problema
 è comunque rimasto , però il post
 di albatros mi lascia ancora qualche speranza,
 in effetti io uso una ram con frequenza 400
 quando il processore invece richiede una
 333 , non avevo pensato che potesse essere
 un problema anche perchè avevo chiesto
 ad alcuni "esperti" e tutti mi avevano detto
 "ti basta aggiornare il bios"
 cosa che ho fatto subito , e che purtroppo
 mi sembra di capire che solo windows
 ne abbia tratto giovamento.
 Proverò a procurarmi una ram con frequenza 333
 (se la trovo) e se non ne vengo fuori
 sarò costretto mio malgrado
 a cambiare la ottima scheda video
 della nvidia

Messaggio da **meritil** » lun 21 feb 2005, 14:45 · lun 21 feb 2005, 14:45

nvidia o kernel-2.6.10?

Cita

Messaggio da meritil » lun 21 feb 2005, 14:45

<A HREF="http://www.nvnews.net/vbulletin/showthread.php?t=42964" TARGET="_blank">Da un´occhiata quì...</A>

Messaggio da **goldy** » mer 23 feb 2005, 20:42 · mer 23 feb 2005, 20:42

nvidia o kernel-2.6.10?

Cita

Messaggio da goldy » mer 23 feb 2005, 20:42

Nada non funzia neanche con la patch
 o meglio il server grafico resiste una decina di minuti,
 (inizialmente mi ero illuso quando ho visto che partiva)
 ma poi va in freeze ...........
 Secondo me il prblema è quella cacchio di scheda madre
 che ho comprato.
 Mi arrendo ........
 grazie a tutti quelli che gentilmente mi hanno aiutato