slacky.eu

Salve,
<BR>ho ricompilato il kernel 2.6.1sulla 9.1, ma ora ho problemi con alsa, il cd e il masterizzatore scsi
<BR>
<BR>#
<BR># Advanced Linux Sound Architecture
<BR>#
<BR>CONFIG_SND=y
<BR>CONFIG_SND_SEQUENCER=y
<BR>CONFIG_SND_SEQ_DUMMY=m
<BR>CONFIG_SND_OSSEMUL=y
<BR>CONFIG_SND_MIXER_OSS=y
<BR>CONFIG_SND_PCM_OSS=y
<BR>CONFIG_SND_SEQUENCER_OSS=y
<BR># CONFIG_SND_VERBOSE_PRINTK is not set
<BR># CONFIG_SND_DEBUG is not set
<BR>
<BR>#
<BR># PCI devices
<BR>#
<BR># CONFIG_SND_ALI5451 is not set
<BR># CONFIG_SND_AZT3328 is not set
<BR># CONFIG_SND_CS46XX is not set
<BR># CONFIG_SND_CS4281 is not set
<BR>CONFIG_SND_EMU10K1=m
<BR># CONFIG_SND_KORG1212 is not set
<BR># CONFIG_SND_NM256 is not set
<BR># CONFIG_SND_RME32 is not set
<BR>
<BR>il cd prima lo vedevo come /dev/cdrom
<BR>adesso il mount mi dà /dev/cdrom not a valid block.......
<BR>così come /dev/scdx
<BR>la penna usb la vede come /dev/sda1
<BR>
<BR>dove sbaglio?
<BR>any help appreciated
<BR>ciao <br>

Parte le del tuo problema lo puoi risolvere leggendo questo <!-- BBCode Start --><A HREF="http://www.slacky.it/modules.php?name=S ... 14&forum=1" TARGET="_blank">POST</A><!-- BBCode End -->, per Alsa i volumi sono impostati ? lsmod che dice ?<br>

Salve Lorys
<BR>il post che mi hai suggerito l´avevo letto,
<BR>cd e masterizzatore non li ho in emulazione scsi - sono proprio scsi
<BR>per alsa - non vede la scheda (soundblaster Live)
<BR>
<BR>lsmod è vuoto
<BR>e questo è il risultato di modules_install
<BR> INSTALL arch/i386/kernel/apm.ko
<BR> INSTALL drivers/mtd/chips/chipreg.ko
<BR> INSTALL drivers/mtd/cmdlinepart.ko
<BR> INSTALL drivers/net/dummy.ko
<BR> INSTALL drivers/base/firmware_class.ko
<BR> INSTALL drivers/mtd/chips/map_ram.ko
<BR> INSTALL drivers/mtd/chips/map_rom.ko
<BR> INSTALL drivers/mtd/mtd_blkdevs.ko
<BR> INSTALL drivers/mtd/mtdblock.ko
<BR> INSTALL drivers/mtd/mtdblock_ro.ko
<BR> INSTALL drivers/mtd/mtdchar.ko
<BR> INSTALL drivers/mtd/mtdcore.ko
<BR> INSTALL drivers/mtd/mtdpart.ko
<BR> INSTALL fs/nls/nls_cp850.ko
<BR> INSTALL fs/nls/nls_iso8859-15.ko
<BR> INSTALL fs/ntfs/ntfs.ko
<BR> INSTALL drivers/char/drm/r128.ko
<BR> INSTALL fs/smbfs/smbfs.ko
<BR> INSTALL sound/pci/emu10k1/snd-emu10k1-synth.ko
<BR> INSTALL sound/pci/emu10k1/snd-emu10k1.ko
<BR> INSTALL sound/synth/emux/snd-emux-synth.ko
<BR> INSTALL sound/core/snd-hwdep.ko
<BR> INSTALL sound/drivers/mpu401/snd-mpu401.ko
<BR> INSTALL sound/drivers/snd-mtpav.ko
<BR> INSTALL sound/core/seq/snd-seq-dummy.ko
<BR> INSTALL sound/core/seq/snd-seq-midi-emul.ko
<BR> INSTALL sound/core/seq/snd-seq-virmidi.ko
<BR> INSTALL sound/drivers/snd-serial-u16550.ko
<BR> INSTALL sound/synth/snd-util-mem.ko
<BR> INSTALL drivers/input/misc/uinput.ko
<BR> INSTALL drivers/media/video/v4l1-compat.ko
<BR> INSTALL drivers/media/video/v4l2-common.ko
<BR> INSTALL drivers/media/video/videodev.ko
<BR> INSTALL drivers/usb/input/wacom.ko
<BR>if [ -r System.map ]; then /sbin/depmod -ae -F System.map 2.6.1; fi
<BR>
<BR>
<BR>ho provato anche a usare lo script
<BR>/usr/src/linux/scripts/MAKEDEV.snd del nuovo 2.6
<BR>ma scarsi risultati
<BR>
<BR>penso che riproverò a ricompilare tutto da zero un´altra volta stasera
<BR>comunque grazie dell´interessamento
<BR>ciao<br>