funziona diversamente. Wicd legge valori di ricezione più bassi del solito ed inoltre ci sono rari picchi assurdi (240%). Il led non si accende ma l'interruttore -ovvio è HW- si.
i 2 lettori non danno segni di vita (testato solo schede SD).
OK.
KO. Non fa testo dato che lo script Hibernate da me installato è accoppiato alla patch del kernel di Linpus.
non testato.
OK.
In linea di massima non ho riscontrato né blocchi né rallentamenti. I comportamenti anomali si sono limitati al wireless.
Fammi sapere se vuoi dei log o test particolari.
Segue l'output di dmesg (tieni conto che sto mantenendo le impostazioni di caricamento moduli etc. che uso con il kernel di linpus)
Codice: Seleziona tutto
BIOS EBDA/lowmem at: 0009fc00/0009fc00
Linux version 2.6.28nsl (root@axj2core) (gcc version 4.2.4) #1 SMP Wed Jan 14 19:54:37 CET 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x3f500 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Warning only 895MB will be used.
Use a HIGHMEM enabled kernel.
kernel direct mapping tables up to 37f4e000 @ 7000-d000
ACPI: RSDP 000FE020, 0024 (r2 INTEL )
ACPI: XSDT 3F4FE120, 0064 (r1 INTEL Napa 1 1000013)
ACPI: FACP 3F4FC000, 00F4 (r4 INTEL Napa 1 MSFT 1000013)
ACPI: DSDT 3F4F2000, 5BEB (r1 INTEL Napa 1 MSFT 1000013)
ACPI: FACS 3F488000, 0040
ACPI: SSDT 3F4FD000, 04C4 (r2 PmRef CpuPm 3000 INTL 20051117)
ACPI: HPET 3F4FB000, 0038 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: APIC 3F4FA000, 0068 (r2 INTEL Napa 1 MSFT 1000013)
ACPI: MCFG 3F4F9000, 003C (r1 INTEL Napa 1 MSFT 1000013)
ACPI: ASF! 3F4F8000, 00A5 (r32 INTEL Napa 1 MSFT 1000013)
ACPI: SLIC 3F4F1000, 0180 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: BOOT 3F4F0000, 0028 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: Local APIC address 0xfee00000
895MB LOWMEM available.
mapped low ram: 0 - 37f4e000
low ram: 00000000 - 37f4e000
bootmap 00009000 - 0000ffec
(8 early reservations) ==> bootmem [0000000000 - 0037f4e000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000200000 - 00006b1588] TEXT DATA BSS ==> [0000200000 - 00006b1588]
#4 [00006b2000 - 00006b5000] INIT_PG_TABLE ==> [00006b2000 - 00006b5000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#7 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00037f4e
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00037f4e
On node 0 totalpages: 229101
free_area_init_node: node 0, pgdat c05df780, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1759 pages used for memmap
Normal zone: 223343 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227310
Kernel command line: BOOT_IMAGE=Linux-new ro root=801 hda=noprobe resume=/dev/sda2
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1596.051 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903428k/916792k available (2898k kernel code, 12900k reserved, 1189k data, 344k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff50000 - 0xfffff000 ( 700 kB)
vmalloc : 0xf874e000 - 0xfff4e000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7f4e000 ( 895 MB)
.init : 0xc0606000 - 0xc065c000 ( 344 kB)
.data : 0xc04d4a66 - 0xc05fe1cc (1189 kB)
.text : 0xc0200000 - 0xc04d4a66 (2898 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.10 BogoMIPS (lpj=1596051)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.82 BogoMIPS (lpj=1595913)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6383.92 BogoMIPS).
net_namespace: 728 bytes
Time: 21:06:48 Date: 01/16/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff]
pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x4fffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:02:00.0: reg 18 64bit mmio: [0x51010000-0x51010fff]
pci 0000:02:00.0: reg 20 64bit mmio: [0x51000000-0x5100ffff]
pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff]
pci 0000:04:00.0: reg 10 32bit mmio: [0x54100300-0x541003ff]
pci 0000:04:00.0: reg 30 32bit mmio: [0xffff8000-0xffffffff]
pci 0000:04:00.2: reg 10 32bit mmio: [0x54100200-0x541002ff]
pci 0000:04:00.3: reg 10 32bit mmio: [0x54100100-0x541001ff]
pci 0000:04:00.4: reg 10 32bit mmio: [0x54100000-0x541000ff]
pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff]
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7811cc0), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 7 (0x1000-0x1fff), disabling
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x200-0x20f has been reserved
system 00:01: ioport range 0x600-0x60f has been reserved
system 00:01: ioport range 0x610-0x610 has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x53f has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0x5000-0x5fff
pci 0000:00:1c.0: MEM window: 0x57300000-0x583fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1: IO window: 0x3000-0x4fff
pci 0000:00:1c.1: MEM window: 0x56300000-0x572fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x000000520fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2: IO window: 0x2000-0x2fff
pci 0000:00:1c.2: MEM window: 0x55200000-0x562fffff
pci 0000:00:1c.2: PREFETCH window: 0x00000052100000-0x000000530fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.3: IO window: 0x1000-0x1fff
pci 0000:00:1c.3: MEM window: 0x54100000-0x551fffff
pci 0000:00:1c.3: PREFETCH window: 0x00000053100000-0x000000540fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0x5000-0x5fff]
bus: 01 index 1 mmio: [0x57300000-0x583fffff]
bus: 01 index 2 mmio: [0x50000000-0x50ffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0x3000-0x4fff]
bus: 02 index 1 mmio: [0x56300000-0x572fffff]
bus: 02 index 2 mmio: [0x51000000-0x520fffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0x2000-0x2fff]
bus: 03 index 1 mmio: [0x55200000-0x562fffff]
bus: 03 index 2 mmio: [0x52100000-0x530fffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0x1000-0x1fff]
bus: 04 index 1 mmio: [0x54100000-0x551fffff]
bus: 04 index 2 mmio: [0x53100000-0x540fffff]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 05 index 0 mmio: [0x0-0x0]
bus: 05 index 1 mmio: [0x0-0x0]
bus: 05 index 2 mmio: [0x0-0x0]
bus: 05 index 3 io port: [0x00-0xffff]
bus: 05 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
HugeTLB registered 4 MB page size, pre-allocated 0 pages
msgmni has been set to 1764
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
pci 0000:00:1d.2: Performing full reset
pci 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
pci 0000:00:1d.3: Performing full reset
ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7811cc0), AE_ALREADY_EXISTS
ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7811cc0), AE_ALREADY_EXISTS
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 511 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pcieport-driver 0000:00:1c.1: irq 510 for MSI/MSI-X
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pcieport-driver 0000:00:1c.2: irq 509 for MSI/MSI-X
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pcieport-driver 0000:00:1c.3: irq 508 for MSI/MSI-X
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
vesafb: framebuffer at 0x40000000, mapped to 0xf8800000, using 1875k, total 7872k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 3F380C90, 0239 (r2 PmRef Cpu0Ist 3000 INTL 20051117)
ACPI: SSDT 3F37FE10, 01C7 (r2 PmRef Cpu0Cst 3001 INTL 20051117)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F380F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117)
ACPI: SSDT 3F37EF10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
Non-volatile memory driver v1.2
intel_rng: FWH not detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ath5k_pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k_pci 0000:03:00.0: setting latency timer to 64
ath5k_pci 0000:03:00.0: registered as 'phy0'
phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Loading iSCSI transport class v2.0-870.
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
ata1.00: ATA-8: ST9120817AS, 3.AAA, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9120817AS 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
Marking TSC unstable due to TSC halts in idle
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2382] (rev 0)
sdhci-pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sdhci-pci 0000:04:00.0: setting latency timer to 64
Registered led device: mmc0
mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:04:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
sdhci-pci 0000:04:00.2: PCI INT A disabled
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
No iBFT detected.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI No-Shortcut mode
PM: Resume from partition /dev/sda2
PM: Checking hibernation image.
PM: Resume from disk failed.
Magic number: 9:463:146
tty ttyp0: hash matches
acpi device:17: hash matches
mmc0: new high speed SD card at address b368
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
mmcblk0: mmc0:b368 SD 970 MiB
mmcblk0: p1
Clocksource tsc unstable (delta = -201227521 ns)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 344k freed
ACPI: WMI: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 507 for MSI/MSI-X
eth0: RTL8102e at 0xf8a70000, 00:1e:68:a4:eb:b2, XID 24a00000 IRQ 507
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input5
ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
acer-wmi: Acer Laptop ACPI-WMI Extras
acer-wmi: Brightness must be controlled by generic video driver
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28nsl ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 5: status 0501 change 0001
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28nsl uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
hub 1-0:1.0: state 7 ports 8 chg 0020 evt 0000
hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28nsl uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
ehci_hcd 0000:00:1d.7: port 5 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb usb4: default language 0x0409
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.28nsl uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
ehci_hcd 0000:00:1d.7: port 5 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
uhci_hcd 0000:00:1d.3: supports USB remote wakeup
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
usb usb5: default language 0x0409
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28nsl uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
uhci_hcd 0000:00:1d.2: port 1 portsc 0082,00
usb 1-5: skipped 1 descriptor after configuration
usb 1-5: skipped 6 descriptors after interface
usb 1-5: skipped 1 descriptor after endpoint
usb 1-5: skipped 9 descriptors after interface
usb 1-5: default language 0x0409
usb 1-5: uevent
usb 1-5: usb_probe_device
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: adding 1-5:1.0 (config #1, interface 0)
usb 1-5:1.0: uevent
usb 1-5: adding 1-5:1.1 (config #1, interface 1)
usb 1-5:1.1: uevent
drivers/usb/core/inode.c: creating file '002'
usb 1-5: New USB device found, idVendor=0c45, idProduct=62c0
usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-5: Product: USB 2.0 Camera
usb 1-5: Manufacturer: Sonix Technology Co., Ltd.
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
Linux video capture interface: v2.00
uvcvideo 1-5:1.0: usb_probe_interface
uvcvideo 1-5:1.0: usb_probe_interface - got id
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input6
usb 1-5: link qh4-0001/f72ba100 start 3 [1/0 us]
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
fuse init (API version 7.10)
usb usb2: suspend_rh (auto-stop)
usb usb3: suspend_rh (auto-stop)
usb usb5: suspend_rh (auto-stop)
usb usb4: suspend_rh (auto-stop)
EXT3 FS on sda1, internal journal
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
usb usb2: suspend_rh
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
hub 5-0:1.0: hub_suspend
usb usb5: bus auto-suspend
usb usb5: suspend_rh
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
usb usb4: suspend_rh
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
usb usb2: uevent
usb 2-0:1.0: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
usb 1-5: uevent
usb 1-5:1.0: uevent
usb 1-5:1.1: uevent
r8169: eth0: link down
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7811cc0), AE_ALREADY_EXISTS
ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7811cc0), AE_ALREADY_EXISTS
ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7811cc0), AE_ALREADY_EXISTS
ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7811cc0), AE_ALREADY_EXISTS
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ath0: authenticate with AP 00:19:e0:f8:4f:bc
ath0: privacy configuration mismatch and mixed-cell disabled - disassociate
ath0: authenticate with AP 00:19:e0:f8:4f:bc
ath0: authenticated
ath0: associate with AP 00:19:e0:f8:4f:bc
ath0: RX AssocResp from 00:19:e0:f8:4f:bc (capab=0x431 status=0 aid=6)
ath0: associated
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 on minor 0
mtrr: no more MTRRs available
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ath0: no IPv6 routers present