ndiswrapper
Inviato: mer 10 ott 2007, 11:15
ciao
dopo aver installato il pacchetto ndiswrapper da repository, ho caricato il modulo della mia wireless (avm fritz stick), ho seguito il wiki http://www.slacky.eu/wikislack/index.ph ... apper_WiFi http://www.slacky.eu/wikislack/index.ph ... ros_AR500G
ma al comando iwconfig wlan0 non mi viene elencata.
posto il risultato di modprobe ndiswrapper && dmesg:
Linux version 2.6.21.5-smp (root@midas) (gcc version 4.1.2) #2 SMP Tue Jun 19 14:58:11 CDT 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001ddf0000 end: 000000001def0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001def0000 size: 000000000000f000 end: 000000001deff000 type: 3
copy_e820_map() start: 000000001deff000 size: 0000000000001000 end: 000000001df00000 type: 4
copy_e820_map() start: 000000001df00000 size: 0000000000100000 end: 000000001e000000 type: 2
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
BIOS-e820: 000000001def0000 - 000000001deff000 (ACPI data)
BIOS-e820: 000000001deff000 - 000000001df00000 (ACPI NVS)
BIOS-e820: 000000001df00000 - 000000001e000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
478MB LOWMEM available.
Entering add_active_range(0, 0, 122608) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 122608
HighMem 122608 -> 122608
early_node_map[1] active PFN ranges
0: 0 -> 122608
On node 0 totalpages: 122608
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 925 pages used for memmap
Normal zone: 117587 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7FE0, 0014 (r0 PTLTD )
ACPI: RSDT 1DEFBCAE, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1DEFEE74, 0074 (r1 NEC ND000080 6040000 MSTF 100000E)
ACPI: DSDT 1DEFBCDA, 319A (r1 NEC ND000080 6040000 MSFT 100000E)
ACPI: FACS 1DEFFFC0, 0040
ACPI: SSDT 1DEFEEE8, 0118 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 20000000 (gap: 1e000000:e1f80000)
Built 1 zonelists. Total pages: 121651
Kernel command line: root= ro root=/dev/hda3
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (013cb000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1600.093 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 476240k/490432k available (6215k kernel code, 13616k reserved, 2017k data, 392k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xde800000 - 0xff7fe000 ( 527 MB)
lowmem : 0xc0000000 - 0xddef0000 ( 478 MB)
.init : 0xc0915000 - 0xc0977000 ( 392 kB)
.data : 0xc0711c79 - 0xc090a38c (2017 kB)
.text : 0xc0100000 - 0xc0711c79 (6215 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3202.06 BogoMIPS (lpj=6404134)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
Enabling disabled K7/SSE Support.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 06b8)
CPU0: AMD mobile AMD Athlon(tm) XP-M 2400+ stepping 00
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9b3, last bus=1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 7 10)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10) *9
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10)
ACPI: Power Resource [QFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:04: ioport range 0x8000-0x808f has been reserved
pnp: 00:04: ioport range 0x8100-0x811f has been reserved
pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved
pnp: 00:04: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:04: iomem range 0xffee0000-0xffef5fff has been reserved
pnp: 00:04: iomem range 0xffef6000-0xffefffff has been reserved
pnp: 00:04: iomem range 0xfec00000-0xfec0ffff has been reserved
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.1 -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
Time: tsc clocksource has been installed.
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[ec009000-ec0097ff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: ec300000-ec3fffff
PREFETCH window: f0000000-f7ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
IO window: 00001c00-00001cff
IO window: 00002000-000020ff
PREFETCH window: 20000000-23ffffff
MEM window: 24000000-27ffffff
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.28 [Flags: R/W].
JFS: nTxBlock = 3722, nTxLock = 29778
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Jun 19 2007 14:57:33) installed
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:02.6 disabled
Switched to high resolution mode on CPU 0
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004ce036049822]
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x2800-0x2807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2808-0x280f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N030ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 58605120 sectors (30005 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2423]-mh3)
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.11
Copyright(c) 2004-2006 Emulex. All rights reserved.
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.3.1 (January 23, 2007)
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
st: Version 20070203, fixed bufsize 32768, s/g segs 256
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT FC Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
usbmon: debugfs is not available
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.2[D] -> Link [LNKH] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: irq 3, io mem 0xec006000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 10, io mem 0xec004000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.1 -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 10, io mem 0xec005000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usb 1-1: configuration #1 chosen from 1 choice
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 617 MB/s
raid6: int32x2 679 MB/s
raid6: int32x4 631 MB/s
raid6: int32x8 417 MB/s
raid6: mmxx1 1310 MB/s
raid6: mmxx2 2123 MB/s
raid6: sse1x1 1203 MB/s
raid6: sse1x2 2012 MB/s
raid6: using algorithm sse1x2 (2012 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 3874.000 MB/sec
raid5: using function: pIII_sse (3874.000 MB/sec)
md: multipath personality registered for level -4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 392k freed
kobject_add failed for ohci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
kobject_add failed for ohci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
Linux agpgart interface v0.102 (c) Dave Jones
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
kobject_add failed for ehci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
scsi 2:0:0:0: Direct-Access TOSHIBA MK1234GAX 0811 PQ: 0 ANSI: 0
ieee1394: exports duplicate symbol _csr1212_destroy_keyval (owned by kernel)
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
sda: sda1
sd 2:0:0:0: Attached scsi disk sda
usb-storage: device scan complete
i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by kernel)
sis900.c: v1.08.10 Apr. 2 2006
ohci1394: exports duplicate symbol ohci1394_unregister_iso_tasklet (owned by kernel)
kobject_add failed for usb_storage with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
kobject_add failed for usb_storage with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
intel8x0_measure_ac97_clock: measured 55262 usecs
intel8x0: clocking to 48000
agpgart: Detected SiS 740 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
Yenta: CardBus bridge found at 0000:00:0a.0 [1033:8218]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x002c1222, devctl 0x66
Yenta: ISA IRQ mask 0x0850, PCI irq 10
Socket status: 30000086
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 4 (level, low) -> IRQ 4
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 4, 00:0d:5e:04:98:22.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
sd 2:0:0:0: Attached scsi generic sg0 type 0
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f
cs: IO port probe 0xa00-0xaff: clean.
Adding 1365516k swap on /dev/hda2. Priority:-1 extents:1 across:1365516k
EXT3 FS on hda3, internal journal
input: PC Speaker as /class/input/input2
input: PS/2 Generic Mouse as /class/input/input3
lp: driver loaded but no devices found
Capability LSM initialized
ieee1394: exports duplicate symbol _csr1212_destroy_keyval (owned by kernel)
ohci1394: exports duplicate symbol ohci1394_unregister_iso_tasklet (owned by kernel)
eth0: Media Link On 100mbps full-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
ndiswrapper version 1.48 loaded (smp=yes, preempt=no)
usb 1-3: reset high speed USB device using ehci_hcd and address 3
ndiswrapper: driver fwlan (AVM GmbH,07/31/2006,2.0.4.1482) loaded
ndiswrapper (mp_init:216): couldn't initialize device: C0000001
ndiswrapper (pnp_start_device:439): Windows driver couldn't initialize the device (C0000001)
ndiswrapper (mp_halt:259): device c8924480 is not initialized - not halting
ndiswrapper: device eth%d removed
ndiswrapper: probe of 1-3:1.0 failed with error -22
usbcore: registered new interface driver ndiswrapper
[/url]
dopo aver installato il pacchetto ndiswrapper da repository, ho caricato il modulo della mia wireless (avm fritz stick), ho seguito il wiki http://www.slacky.eu/wikislack/index.ph ... apper_WiFi http://www.slacky.eu/wikislack/index.ph ... ros_AR500G
ma al comando iwconfig wlan0 non mi viene elencata.
posto il risultato di modprobe ndiswrapper && dmesg:
Linux version 2.6.21.5-smp (root@midas) (gcc version 4.1.2) #2 SMP Tue Jun 19 14:58:11 CDT 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001ddf0000 end: 000000001def0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001def0000 size: 000000000000f000 end: 000000001deff000 type: 3
copy_e820_map() start: 000000001deff000 size: 0000000000001000 end: 000000001df00000 type: 4
copy_e820_map() start: 000000001df00000 size: 0000000000100000 end: 000000001e000000 type: 2
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
BIOS-e820: 000000001def0000 - 000000001deff000 (ACPI data)
BIOS-e820: 000000001deff000 - 000000001df00000 (ACPI NVS)
BIOS-e820: 000000001df00000 - 000000001e000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
478MB LOWMEM available.
Entering add_active_range(0, 0, 122608) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 122608
HighMem 122608 -> 122608
early_node_map[1] active PFN ranges
0: 0 -> 122608
On node 0 totalpages: 122608
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 925 pages used for memmap
Normal zone: 117587 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7FE0, 0014 (r0 PTLTD )
ACPI: RSDT 1DEFBCAE, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1DEFEE74, 0074 (r1 NEC ND000080 6040000 MSTF 100000E)
ACPI: DSDT 1DEFBCDA, 319A (r1 NEC ND000080 6040000 MSFT 100000E)
ACPI: FACS 1DEFFFC0, 0040
ACPI: SSDT 1DEFEEE8, 0118 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 20000000 (gap: 1e000000:e1f80000)
Built 1 zonelists. Total pages: 121651
Kernel command line: root= ro root=/dev/hda3
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (013cb000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1600.093 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 476240k/490432k available (6215k kernel code, 13616k reserved, 2017k data, 392k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xde800000 - 0xff7fe000 ( 527 MB)
lowmem : 0xc0000000 - 0xddef0000 ( 478 MB)
.init : 0xc0915000 - 0xc0977000 ( 392 kB)
.data : 0xc0711c79 - 0xc090a38c (2017 kB)
.text : 0xc0100000 - 0xc0711c79 (6215 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3202.06 BogoMIPS (lpj=6404134)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
Enabling disabled K7/SSE Support.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 06b8)
CPU0: AMD mobile AMD Athlon(tm) XP-M 2400+ stepping 00
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9b3, last bus=1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 7 10)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10) *9
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10)
ACPI: Power Resource [QFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:04: ioport range 0x8000-0x808f has been reserved
pnp: 00:04: ioport range 0x8100-0x811f has been reserved
pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved
pnp: 00:04: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:04: iomem range 0xffee0000-0xffef5fff has been reserved
pnp: 00:04: iomem range 0xffef6000-0xffefffff has been reserved
pnp: 00:04: iomem range 0xfec00000-0xfec0ffff has been reserved
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.1 -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
Time: tsc clocksource has been installed.
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[ec009000-ec0097ff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: ec300000-ec3fffff
PREFETCH window: f0000000-f7ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
IO window: 00001c00-00001cff
IO window: 00002000-000020ff
PREFETCH window: 20000000-23ffffff
MEM window: 24000000-27ffffff
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.28 [Flags: R/W].
JFS: nTxBlock = 3722, nTxLock = 29778
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Jun 19 2007 14:57:33) installed
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:02.6 disabled
Switched to high resolution mode on CPU 0
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004ce036049822]
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x2800-0x2807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2808-0x280f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N030ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 58605120 sectors (30005 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2423]-mh3)
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.11
Copyright(c) 2004-2006 Emulex. All rights reserved.
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.3.1 (January 23, 2007)
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
st: Version 20070203, fixed bufsize 32768, s/g segs 256
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT FC Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
usbmon: debugfs is not available
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.2[D] -> Link [LNKH] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: irq 3, io mem 0xec006000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 10, io mem 0xec004000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.1 -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 10, io mem 0xec005000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usb 1-1: configuration #1 chosen from 1 choice
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 617 MB/s
raid6: int32x2 679 MB/s
raid6: int32x4 631 MB/s
raid6: int32x8 417 MB/s
raid6: mmxx1 1310 MB/s
raid6: mmxx2 2123 MB/s
raid6: sse1x1 1203 MB/s
raid6: sse1x2 2012 MB/s
raid6: using algorithm sse1x2 (2012 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 3874.000 MB/sec
raid5: using function: pIII_sse (3874.000 MB/sec)
md: multipath personality registered for level -4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 392k freed
kobject_add failed for ohci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
kobject_add failed for ohci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
Linux agpgart interface v0.102 (c) Dave Jones
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
kobject_add failed for ehci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
scsi 2:0:0:0: Direct-Access TOSHIBA MK1234GAX 0811 PQ: 0 ANSI: 0
ieee1394: exports duplicate symbol _csr1212_destroy_keyval (owned by kernel)
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
sda: sda1
sd 2:0:0:0: Attached scsi disk sda
usb-storage: device scan complete
i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by kernel)
sis900.c: v1.08.10 Apr. 2 2006
ohci1394: exports duplicate symbol ohci1394_unregister_iso_tasklet (owned by kernel)
kobject_add failed for usb_storage with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
kobject_add failed for usb_storage with -EEXIST, don't try to register things with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
=======================
intel8x0_measure_ac97_clock: measured 55262 usecs
intel8x0: clocking to 48000
agpgart: Detected SiS 740 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
Yenta: CardBus bridge found at 0000:00:0a.0 [1033:8218]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x002c1222, devctl 0x66
Yenta: ISA IRQ mask 0x0850, PCI irq 10
Socket status: 30000086
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 4 (level, low) -> IRQ 4
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 4, 00:0d:5e:04:98:22.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
sd 2:0:0:0: Attached scsi generic sg0 type 0
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f
cs: IO port probe 0xa00-0xaff: clean.
Adding 1365516k swap on /dev/hda2. Priority:-1 extents:1 across:1365516k
EXT3 FS on hda3, internal journal
input: PC Speaker as /class/input/input2
input: PS/2 Generic Mouse as /class/input/input3
lp: driver loaded but no devices found
Capability LSM initialized
ieee1394: exports duplicate symbol _csr1212_destroy_keyval (owned by kernel)
ohci1394: exports duplicate symbol ohci1394_unregister_iso_tasklet (owned by kernel)
eth0: Media Link On 100mbps full-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
ndiswrapper version 1.48 loaded (smp=yes, preempt=no)
usb 1-3: reset high speed USB device using ehci_hcd and address 3
ndiswrapper: driver fwlan (AVM GmbH,07/31/2006,2.0.4.1482) loaded
ndiswrapper (mp_init:216): couldn't initialize device: C0000001
ndiswrapper (pnp_start_device:439): Windows driver couldn't initialize the device (C0000001)
ndiswrapper (mp_halt:259): device c8924480 is not initialized - not halting
ndiswrapper: device eth%d removed
ndiswrapper: probe of 1-3:1.0 failed with error -22
usbcore: registered new interface driver ndiswrapper
[/url]
