S3 Graphics ProSavageDDR DRIVER

n3tfr33 · Messaggio da **n3tfr33** » ven 21 lug 2006, 14:40

1)Avevo sbagliato ad avviare il kernel...adesso è quello giusto:

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/slax:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.9.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: Linux 2.6.14.6 i686 [ELF]
Current Operating System: Linux slax 2.6.17.4 #1 Mon Jul 17 04:17:17 GMT 2006 i686
Build Date: 14 January 2006
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 21 14:30:24 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "VESA Framebuffer"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3156 card 1631,e004 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 1524,1411 card 1800,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:10:0: chip 1106,3038 card 1631,e004 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1631,e004 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1631,e004 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1631,e004 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1631,e004 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1631,e004 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 1631,e004 rev 80 class 07,80,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1631,e004 rev 74 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 5333,8d04 card 1631,e004 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000dfff (0x2000) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x90000000 - 0x9fffffff (0x10000000) MX
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:9:0), (0,2,5), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00001800 - 0x000018ff (0x100) IX
[1] -1 0 0x00001c00 - 0x00001cff (0x100) IX
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x12000000 - 0x13ffffff (0x2000000) MX
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x10000000 - 0x11ffffff (0x2000000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) S3 Inc. VT8375 [ProSavage8 KM266/KL266] rev 0, Mem @ 0xe0000000/19, 0x90000000/27, BIOS @ 0x000c0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xa0000000 from 0xa3ffffff to 0x9fffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[1] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[2] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[3] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[4] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[5] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[6] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[7] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[8] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[9] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[10] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[11] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[1] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[2] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[3] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[4] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[5] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[6] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[7] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[8] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[9] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[10] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[11] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[6] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[7] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[8] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[9] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[14] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[15] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[16] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[17] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[18] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.9.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 2.0.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) v4l driver for Video4Linux
(II) SAVAGE: driver (version 2.0.2) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ProSavageDDR found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[6] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[7] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[8] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[9] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[14] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[15] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[16] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[17] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[18] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[6] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[7] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[8] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[9] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[17] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[18] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[19] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[20] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[21] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(**) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
(==) SAVAGE(0): RGB weight 888
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
(--) SAVAGE(0): Engine: "ProSavageDDR"
(--) SAVAGE(0): AGP card detected
(==) SAVAGE(0): Using AGP DMA
(==) SAVAGE(0): Will try command and vertex DMA mode
(==) SAVAGE(0): Using AGP 1x mode
(==) SAVAGE(0): Using 16 MB AGP aperture
(II) SAVAGE(0): mapping MMIO @ 0xe0000000 with size 0x80000
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 32768k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" removed.
(--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
(--) SAVAGE(0): 1024x768 TFT LCD panel detected and active
(--) SAVAGE(0): - Limiting video mode to 1024x768
(--) SAVAGE(0): Found 13 modes at this depth:
[10f] 320 x 200, 70Hz
[134] 320 x 240, 72Hz
[144] 400 x 300, 72Hz
[154] 512 x 384, 70Hz
[11e] 640 x 400, 70Hz
[112] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz, 160Hz
[115] 800 x 600, 60Hz, 75Hz, 85Hz
[118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz
[17b] 1280 x 768, 60Hz
[16a] 1280 x 960, 60Hz, 85Hz
[11b] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz
[13e] 1400 x 1050, 60Hz, 75Hz
[124] 1600 x 1200, 60Hz
(II) SAVAGE(0): My Monitor: Using hsync range of 31.50-150.00 kHz
(II) SAVAGE(0): My Monitor: Using vrefresh range of 75.00-85.00 Hz
(II) SAVAGE(0): Clock range: 10.00 to 220.00 MHz
(--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
(II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
(II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
(--) SAVAGE(0): Chose mode 11e at 70Hz.
(--) SAVAGE(0): Chose mode 10f at 70Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
(II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
(II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 118 at 70Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(II) SAVAGE(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz.
(II) SAVAGE(0): Not using default mode "832x624" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
(II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1152x768" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 576x384 54Hz.
(II) SAVAGE(0): Not using default mode "576x384" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 800x512 60Hz.
(II) SAVAGE(0): Not using default mode "800x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 11e at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 10f at 70Hz.
(--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
(**) SAVAGE(0): *Default mode "1024x768": 194.0 MHz, 137.0 kHz, 85.0 Hz (D)
(II) SAVAGE(0): Modeline "1024x768" 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync
(**) SAVAGE(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) SAVAGE(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) SAVAGE(0): *Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) SAVAGE(0): Modeline "640x480" 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) SAVAGE(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) SAVAGE(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) SAVAGE(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) SAVAGE(0): Default mode "1024x768": 170.2 MHz, 120.2 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "1024x768" 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 114.8 MHz, 106.2 kHz, 85.0 Hz (D)
(II) SAVAGE(0): Modeline "800x600" 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "800x600" 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) SAVAGE(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) SAVAGE(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) SAVAGE(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) SAVAGE(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) SAVAGE(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) SAVAGE(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
(==) SAVAGE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x90000000 - 0x97ffffff (0x8000000) MS[B]
[1] 0 0 0xe0000000 - 0xe007ffff (0x80000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf0000100 - 0xf00001ff (0x100) MX[B]
[8] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[9] -1 0 0xa0000000 - 0x9fffffff (0x0) MX[B]O
[10] -1 0 0x98000000 - 0x9800ffff (0x10000) MX[B](B)
[11] -1 0 0x90000000 - 0x97ffffff (0x8000000) MX[B](B)
[12] -1 0 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000e300 - 0x0000e3ff (0x100) IX[B]
[19] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
[20] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
[21] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[22] -1 0 0x00001300 - 0x0000131f (0x20) IX[B]
[23] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): mapping framebuffer @ 0x90000000 with size 0x2000000
(==) SAVAGE(0): Write-combining range (0x90000000,0x2000000)
(II) SAVAGE(0): Splitting WC range: base: 0x92000000, size: 0x5000000
(II) SAVAGE(0): Splitting WC range: base: 0x94000000, size: 0x3000000
(==) SAVAGE(0): Write-combining range (0x96000000,0x1000000)
(==) SAVAGE(0): Write-combining range (0x94000000,0x3000000)
(==) SAVAGE(0): Write-combining range (0x92000000,0x5000000)
(II) SAVAGE(0): map aperture:0xb07eb000
(II) SAVAGE(0): 9348 kB of Videoram needed for 3D; 32768 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 32 depth: 24
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) SAVAGE(0): [drm] DRM interface version 1.2
(II) SAVAGE(0): [drm] created "savage" driver at busid "pci:0000:01:00.0"
(II) SAVAGE(0): [drm] added 8192 byte SAREA at 0xcec93000
(II) SAVAGE(0): [drm] mapped SAREA 0xcec93000 to 0xb07d9000
(II) SAVAGE(0): [drm] framebuffer handle = 0x90000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3156; Card 0x5333/0x8d04]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] command DMA handle = 0xa0000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xa0100000
(II) SAVAGE(0): [drm] aperture handle = 0x92000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x05f1f000
(II) SAVAGE(0): [drm] Status page mapped at 0xb07d8000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(II) SAVAGE(0): virtualX:1024,virtualY:768
(II) SAVAGE(0): bpp:32,tiledwidthBytes:4096,tiledBufferSize:3145728
(II) SAVAGE(0): bpp:32,widthBytes:4096,BufferSize:3145728
(II) SAVAGE(0): videoRambytes:0x02000000
(II) SAVAGE(0): textureSize:0x014df000
(II) SAVAGE(0): textureSize:0x014df000
(II) SAVAGE(0): textureOffset:0x00b00000
(II) SAVAGE(0): depthOffset:0x00800000,depthPitch:4096
(II) SAVAGE(0): backOffset:0x00500000,backPitch:4096
(II) SAVAGE(0): Memory manager initialized to (0,0) (1024,1279)
(II) SAVAGE(0): Largest offscreen area available: 1024 x 511
(II) SAVAGE(0): Reserved back buffer at offset 0x500000
(II) SAVAGE(0): Reserved depth buffer at offset 0x800000
(II) SAVAGE(0): Reserved 21372 kb for textures at offset 0xb00000
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
24 128x128 slots
(==) SAVAGE(0): Backing store disabled
(II) SAVAGE(0): X context handle = 0x1
(II) SAVAGE(0): [DRI] installation complete
(II) SAVAGE(0): [junkers]pSAVAGEDRIServer:
(II) SAVAGE(0): [junkers] reserved_map_agpstart:0x00000000
(II) SAVAGE(0): [junkers] reserved_map_idx:0x00000000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000000
(II) SAVAGE(0): [junkers] chipset:0x00000000
(II) SAVAGE(0): [junkers] sgram:0x00000000
(II) SAVAGE(0): [junkers] frontbufferSize:0x00300000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] frontPitch:0x00001000
(II) SAVAGE(0): [junkers] backbufferSize:0x00300000
(II) SAVAGE(0): [junkers] backOffset:0x00500000
(II) SAVAGE(0): [junkers] backPitch:0x00001000
(II) SAVAGE(0): [junkers] depthbufferSize:0x00300000
(II) SAVAGE(0): [junkers] depthOffset:0x00800000
(II) SAVAGE(0): [junkers] depthPitch:0x00001000
(II) SAVAGE(0): [junkers] textureOffset:0x00b00000
(II) SAVAGE(0): [junkers] textureSize:0x014df000
(II) SAVAGE(0): [junkers] textureSize:0x014df000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] agp:handle:0x00000001
(II) SAVAGE(0): [junkers] agp:offset:0x01000000
(II) SAVAGE(0): [junkers] agp:size:0x01000000
(II) SAVAGE(0): [junkers] agp0x00000000
(II) SAVAGE(0): [junkers] registers:handle:0xe0000000
(II) SAVAGE(0): [junkers] registers:offset:0x00000000
(II) SAVAGE(0): [junkers] registers:size:0x00080000
(II) SAVAGE(0): [junkers] registers0x00000000
(II) SAVAGE(0): [junkers] status:handle:0x05f1f000
(II) SAVAGE(0): [junkers] status:offset:0x00000000
(II) SAVAGE(0): [junkers] status:size:0x00001000
(II) SAVAGE(0): [junkers] status0xb07d8000
(II) SAVAGE(0): [junkers] agpTextures:handle:0xa0100000
(II) SAVAGE(0): [junkers] agpTextures:offset:0x00100000
(II) SAVAGE(0): [junkers] agpTextures:size:0x00f00000
(II) SAVAGE(0): [junkers] apgTextures0x00000000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:handle:0xa0000000
(II) SAVAGE(0): [junkers] cmdDma:offset:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:size:0x00100000
(II) SAVAGE(0): [junkers] cmdDma0x00000000
(II) SAVAGE(0): [junkers]pSAVAGEDRI:
(II) SAVAGE(0): [junkers] chipset:0x00000006
(II) SAVAGE(0): [junkers] width:0x00000400
(II) SAVAGE(0): [junkers] height:0x00000300
(II) SAVAGE(0): [junkers] mem:0x02000000
(II) SAVAGE(0): [junkers] cpp:4
(II) SAVAGE(0): [junkers] zpp:4
(II) SAVAGE(0): [junkers] agpMode:1
(II) SAVAGE(0): [junkers] bufferSize:65536
(II) SAVAGE(0): [junkers] frontbufferSize:0x00300000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] backbufferSize:0x00300000
(II) SAVAGE(0): [junkers] backOffset:0x00500000
(II) SAVAGE(0): [junkers] depthbufferSize:0x00300000
(II) SAVAGE(0): [junkers] depthOffset:0x00800000
(II) SAVAGE(0): [junkers] textureOffset:0x00b00000
(II) SAVAGE(0): [junkers] textureSize:0x01400000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000015
(II) SAVAGE(0): [junkers] agpTextureHandle:0xa0100000
(II) SAVAGE(0): [junkers] agpTextureSize:0x00f00000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000014
(II) SAVAGE(0): [junkers] apertureHandle:0x92000000
(II) SAVAGE(0): [junkers] apertureSize:0x05000000
(II) SAVAGE(0): [junkers] aperturePitch:0x00002000
(II) SAVAGE(0): [junkers] statusHandle:0x05f1f000
(II) SAVAGE(0): [junkers] statusSize:0x00001000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000898
(II) SAVAGE(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Buttons" "3"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/75dpi/:unscaled, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/:unscaled, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/75dpi/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/, removing from list!

2) Io uso questa distribuzione http://www.remote-exploit.org/index.php/BackTrack, è basata sulla slacky...non ci dovrebbero essere problemi una volta che l'ho installata.

3) Non ho capito cosa intendi con commenta le righe...devo metterci davanti #???

grazie

n3tfr33 · Messaggio da **n3tfr33** » ven 21 lug 2006, 14:59

Ho commentato la parte del AGP con # e ho riavviato ma non è cabiato nulla...glxinfo è ancora come prima...

Messaggio da **phobos3576** » sab 22 lug 2006, 1:26

Questa situazione mi sembra assurda; il file /var/log/Xorg.0.log dice che è tutto a posto. Infatti, la tua scheda video viene rilevata perfettamente!

In passato, per attivare l'accelerazione grafica sulle Savage bisognava scaricare il codice sorgente dei driver e ricompilare il tutto; ma con gli ultimi kernel e con Xorg 6.9.0 tutto ciò diventa superfluo.
Non so proprio cosa pensare.

Visto che stai facendo esperimenti, proviamo allora con l'ultima spiaggia.

Vai a questo indirizzo: http://dri.freedesktop.org/snapshots/

Scarica la versione più recente possibile del file savage-XXXXXXXX-linux.i386.tar.bz2 e decomprimilo da qualche parte.
Ora loggati a Linux come utente root e SENZA AVVIARE STARTX, procedi all'installazione dei vari moduli per il supporto al DRI.

Vai nella directory dove hai decompresso il file savage ed esegui ./install.sh

Se non vengono generati errori, verifica che siano già stati caricati i moduli agpgart, via_agp e prova a lanciare startx.

Se non funziona, puoi rieseguire il precedente comando ./install.sh con il paramentro restore.

Quindi, il comando completo è ./install.sh restore.

In ogni caso, ti ripeto che tutto questo procedimento non dovrebbe essere necessario con gli ultimi kernel e Xorg 6.9.0 o superiore; probabilmente stai sbagliando qualcosa!

n3tfr33 · Messaggio da **n3tfr33** » sab 22 lug 2006, 15:15

Moduli caricati correttamente, nessun errore con startx ma nessun accellerazione...c'è un modo per vedere se ho fatto degli errori...

Messaggio da **phobos3576** » sab 22 lug 2006, 15:27

Gli eventuali errori, come ti ho già detto, vengono mostrati nel file /var/log/Xorg.0.log; nel tuo caso però Xorg.0.log dice che è tutto a posto!

Come ulteriore tentativo, vai di nuovo a questo indirizzo: http://dri.freedesktop.org/snapshots/

Scarica la versione più recente possibile del file common-XXXXXXXX-linux.i386.tar.bz2 e decomprimilo da qualche parte; segui esattamente il procedimento già descritto per il file savage e guarda se così funziona!

n3tfr33 · Messaggio da **n3tfr33** » sab 22 lug 2006, 18:13

dopo aver installato il nuovo pacchetto non parte startx....quindi sono tornato alla situazione precedente...

Messaggio da **phobos3576** » dom 23 lug 2006, 1:45

A questo punto non so più cosa inventarmi!

Recentemente ho installato Linux sui PC di due miei amici e non ho avuto nessun problema con l'accelerazione grafica; il primo PC aveva una ATI Rage, mentre il secondo aveva una vecchia 3Dfx Voodoo3 3500 TV AGP.

In seguito ho installato una Matrox Millennium G400 AGP sul mio PC e ugualmente non ho avuto nessun problema nell'abilitare l'accelerazione hardware.

So che le Savage sono piuttosto ostiche, ma sicuramente sono supportate dal progetto DRI.
Se premi il tasto "Search" qui su Slacky.it e cerchi il termine "savage" pui notare che sono presenti diversi post di utenti che, inizialmente hanno avuto problemi, ma alla fine hanno risolto tutto!

All'indirizzo http://www.linuxquestions.org/questions ... p?t=168951 puoi trovare una lunghissima discussione iniziata nel 2004 e finita nel 2006; nelle ultime risposte si dice appunto che gli ultimi kernel integrano il supporto per l'accelerazione grafica delle Savage e quindi non c'è più bisogno di fare i salti mortali.

L'unica cosa in più rispetto a ciò che ti ho detto io, è che viene consigliato di aggiungere la riga

alias agpgart via-agp

al file /etc/modprobe.conf