Schermo nero uscita kde

Usate questo forum per richieste di aiuto e consigli sull'hardware montato nelle vostre macchine con GNU/Linux Slackware.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata e la versione del Kernel. Questi dati aiutano le persone che possono rispondere.
2) Citare il tipo di hardware coinvolto in modo dettagliato.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT. Non usare termini gergali come procio, mobo e simili per identificare i componenti hardware.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Rispondi
v@le
Linux 0.x
Linux 0.x
Messaggi: 6
Iscritto il: sab 26 nov 2005, 11:22
Località: Roma

Schermo nero uscita kde

Messaggio da v@le »

ho una sack 10.2 con xorg 6.8 e kernel 2.6.14
ho installato gli ultimi driver ATI per la mia 9700Moblity
l'istallazione è andata a buon fine e funziona tutto alla perfezione (3D)
all'uscita da kde, però, invece di riapparire la consolle, ho una scermata nera
fa parte dei problemi che hanno i driver ati o devo agire sul kernel?
Top
Avatar utente
Luke88
Linux 3.x
Linux 3.x
Messaggi: 624
Iscritto il: mer 7 set 2005, 0:00
Slackware: 13.0
Kernel: 2.6.30-zen4
Desktop: xfce4
Località: Udine

Messaggio da Luke88 »

guarda cosa riporta /var/log/Xorg.log ...
non è che ti sei dimenticato di farli caricare in xorg.conf?
Meeting efficency = Average_Intelligence/( Number_Of_People^2 )
Top
Avatar utente
Paoletta
Staff
Staff
Messaggi: 3975
Iscritto il: lun 25 apr 2005, 0:00
Slackware: 14.2 - 64 bit
Desktop: fluxbox
Località: Varese

Messaggio da Paoletta »

magari ti può servire questo, anche se il kernel di cui si parla è il 2.6.15:
http://www.linuxvar.it/index.php/ATI_e_Kernel_2.6.15
Top
Avatar utente
Luke88
Linux 3.x
Linux 3.x
Messaggi: 624
Iscritto il: mer 7 set 2005, 0:00
Slackware: 13.0
Kernel: 2.6.30-zen4
Desktop: xfce4
Località: Udine

Messaggio da Luke88 »

[quote=ATI]
The ATI Proprietary Linux driver is designed to support the following ATI Mobility™ products:

* Mobility™ Radeon® X800
* Mobility™ Radeon® X700
* Mobility™ Radeon® X600
* Mobility™ Radeon® X300
* Mobility™ Radeon® 9800
* Mobility™ Radeon® 9600
* Mobility™ Radeon® 9550
* Mobility™ Radeon® 9500
* Mobility™ Radeon® 9000
* Mobility™ Radeon® 9200
* Radeon® Xpress 200M series
[/quote]
non c'è la 9700...
posta Xorg.log...
Meeting efficency = Average_Intelligence/( Number_Of_People^2 )
Top
v@le
Linux 0.x
Linux 0.x
Messaggi: 6
Iscritto il: sab 26 nov 2005, 11:22
Località: Roma

Messaggio da v@le »

la scheda è riconosciuta come ATI 9600

Codice: Seleziona tutto

lspci
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
ho agpgart come modulo e fb_radeon statico nel kernel

ecco Xorg.log

Codice: Seleziona tutto

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/ninnino:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.13 i686 [ELF] 
Current Operating System: Linux ninnino 2.6.14 #2 PREEMPT Thu Mar 2 14:44:17 CET 2006 i686
Build Date: 11 September 2005
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 10 19:49:39 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "aticonfig Screen 0" (0)
(**) |   |-->Monitor "aticonfig Monitor 0"
(**) |   |-->Device "ATI Graphics Adapter 0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) |-->Input Device "SynapticMouse"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/TTF,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/CID,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/local/share/fonts"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.7
	X.Org XInput driver : 0.4
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3580 card 1025,0064 rev 02 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 8086,3584 card 1025,0064 rev 02 class 08,80,00 hdr 00
(II) PCI: 00:00:3: chip 8086,3585 card 1025,0064 rev 02 class 08,80,00 hdr 80
(II) PCI: 00:01:0: chip 8086,3581 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1025,0064 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1025,0064 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1025,0064 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1025,0064 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 83 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1025,0064 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1025,0064 rev 03 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1025,0064 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1025,0064 rev 03 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e50 card 1025,0064 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:02:0: chip 14e4,4401 card 1025,0064 rev 01 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00
(II) PCI: 02:06:0: chip 104c,8031 card 4000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 104c,8032 card 1025,0064 rev 00 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 104c,8033 card 1025,0064 rev 00 class 01,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[1] -1	0	0x00003400 - 0x000034ff (0x100) IX[B]
	[2] -1	0	0x00003800 - 0x000038ff (0x100) IX[B]
	[3] -1	0	0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xd0100000 - 0xd01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0	0x00004000 - 0x000040ff (0x100) IX[B]
	[1] -1	0	0x00004400 - 0x000044ff (0x100) IX[B]
	[2] -1	0	0x00004800 - 0x000048ff (0x100) IX[B]
	[3] -1	0	0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xd0200000 - 0xd05fffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0x30000000 - 0x32ffffff (0x3000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,6), BCTRL: 0x0340 (VGA_EN is cleared)
(II) Bus 3 I/O range:
	[0] -1	0	0x00004000 - 0x000040ff (0x100) IX[B]
	[1] -1	0	0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 3 prefetchable memory range:
	[0] -1	0	0x30000000 - 0x31ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xd8000000/27, 0xd0100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xd0206000 - 0xd0207fff (0x2000) MX[B]
	[1] -1	0	0xd0200000 - 0xd0203fff (0x4000) MX[B]
	[2] -1	0	0xd020a000 - 0xd020a7ff (0x800) MX[B]
	[3] -1	0	0xd0208000 - 0xd0208fff (0x1000) MX[B]
	[4] -1	0	0xd0204000 - 0xd0205fff (0x2000) MX[B]
	[5] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[6] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[7] -1	0	0x33000000 - 0x330003ff (0x400) MX[B]
	[8] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[10] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[11] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[12] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[13] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[14] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[15] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[16] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[17] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[18] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[19] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[20] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[21] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xd0206000 - 0xd0207fff (0x2000) MX[B]
	[1] -1	0	0xd0200000 - 0xd0203fff (0x4000) MX[B]
	[2] -1	0	0xd020a000 - 0xd020a7ff (0x800) MX[B]
	[3] -1	0	0xd0208000 - 0xd0208fff (0x1000) MX[B]
	[4] -1	0	0xd0204000 - 0xd0205fff (0x2000) MX[B]
	[5] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[6] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[7] -1	0	0x33000000 - 0x330003ff (0x400) MX[B]
	[8] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[10] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[11] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[12] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[13] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[14] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[15] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[16] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[17] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[18] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[19] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[20] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[21] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x32ffffff (0x32f00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x32ffffff (0x32f00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xd0206000 - 0xd0207fff (0x2000) MX[B]
	[6] -1	0	0xd0200000 - 0xd0203fff (0x4000) MX[B]
	[7] -1	0	0xd020a000 - 0xd020a7ff (0x800) MX[B]
	[8] -1	0	0xd0208000 - 0xd0208fff (0x1000) MX[B]
	[9] -1	0	0xd0204000 - 0xd0205fff (0x2000) MX[B]
	[10] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[11] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[12] -1	0	0x33000000 - 0x330003ff (0x400) MX[B]
	[13] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[14] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[15] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[16] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[20] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[21] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[22] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[23] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[24] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[25] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[26] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[27] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[28] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.8.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) Module synaptics: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.3
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 6.8.0, module version = 8.22.5
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "synaptics"
(II) Reloading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) ATI Radeon/FireGL: The following chipsets are supported:
	RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
	MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
	RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
	RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
	MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
	FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
	RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
	RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
	RADEON 9600 PRO (RV360 4152), RADEON 9600 (RV350 4E51),
	MOBILITY RADEON 9600/9700 (M10/M11 4E50),
	MOBILITY RADEON 9550 (M12 4E56), RADEON 9500 (R300 4144),
	RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
	RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
	RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
	RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
	FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
	RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
	FireGL X2-256/X2-256t (R350 4E4B),
	MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
	RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
	FireGL V3100 (RV370 5B64), MOBILITY RADEON X300 (M22 5460),
	MOBILITY RADEON X600 (M24 5462), MOBILITY FireGL V3100 (M22 5464),
	RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
	MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
	MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
	RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
	RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
	FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
	RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
	RADEON X800 PRO (R423 5549),
	RADEON X800 XT Platinum Edition (R423 554A),
	RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
	FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
	MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
	RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
	RADEON X850 XT Platinum Edition (R480 5D4D),
	RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
	MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
	FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
	RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
	RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
	RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
	MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL,
	RADEON 9100 IGP (RS300 5834),
	RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
	MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
	RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
	RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
	RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
	RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.22.5
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.22g1                           
(II) ATI Proprietary Linux Driver Build Date: Feb  7 2006 19:32:18
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.22.1-driver-lnx-244115
(--) Chipset MOBILITY RADEON 9600/9700 (M10/M11 4E50) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x32ffffff (0x32f00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xd0206000 - 0xd0207fff (0x2000) MX[B]
	[6] -1	0	0xd0200000 - 0xd0203fff (0x4000) MX[B]
	[7] -1	0	0xd020a000 - 0xd020a7ff (0x800) MX[B]
	[8] -1	0	0xd0208000 - 0xd0208fff (0x1000) MX[B]
	[9] -1	0	0xd0204000 - 0xd0205fff (0x2000) MX[B]
	[10] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[11] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[12] -1	0	0x33000000 - 0x330003ff (0x400) MX[B]
	[13] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[14] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[15] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[16] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[20] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[21] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[22] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[23] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[24] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[25] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[26] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[27] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[28] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x821e3c0
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x32ffffff (0x32f00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xd0206000 - 0xd0207fff (0x2000) MX[B]
	[6] -1	0	0xd0200000 - 0xd0203fff (0x4000) MX[B]
	[7] -1	0	0xd020a000 - 0xd020a7ff (0x800) MX[B]
	[8] -1	0	0xd0208000 - 0xd0208fff (0x1000) MX[B]
	[9] -1	0	0xd0204000 - 0xd0205fff (0x2000) MX[B]
	[10] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[11] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[12] -1	0	0x33000000 - 0x330003ff (0x400) MX[B]
	[13] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[14] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[15] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[16] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[22] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[23] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[24] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[25] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[26] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[27] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[28] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[29] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[30] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[31] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
	[32] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[33] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "MOBILITY RADEON 9600/9700 (M10/M11 4E50)" (Chipset = 0x4e50)
(--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0064)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd8000000
(--) fglrx(0): MMIO registers at 0xd0100000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.1.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 65536 kB
(II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON 9600   
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: P11 
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/X11R6/lib/modules/linux/libdrm.a
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(--) fglrx(0): VideoRAM: 65536 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): Connected Display1: LCD on internal LVDS
(II) fglrx(0):  Display1: No EDID information from DDC.
(II) fglrx(0): Derived EDID from BIOS and internal tables for Display1:
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: MS_  Model: 0  Serial#: 0
(II) fglrx(0): Year: 1990  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:Serration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 40  vert.: 30
(II) fglrx(0): Gamma: 1.00
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; Non RGB Multicolor Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.000 redY: 0.000   greenX: 0.000 greenY: 0.000
(II) fglrx(0): blueX: 0.000 blueY: 0.000   whiteX: 0.000 whiteY: 0.000
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640  vsize 480  refresh: 60  vid: 16433
(II) fglrx(0): #1: hsize: 800  vsize 600  refresh: 60  vid: 16453
(II) fglrx(0): #2: hsize: 1024  vsize 768  refresh: 60  vid: 16481
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 68.9 MHz   Image Size:  0 x 0 mm
(II) fglrx(0): h_active: 1280  h_sync: 1296  h_sync_end 1328 h_blank_end 1408 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 800  v_sync_end 800 v_blanking: 816 v_border: 0
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3.  2 power states available:
(II) fglrx(0):   1. 452/209MHz @ 60Hz [enable load balancing]
(II) fglrx(0):   2. 105/105MHz @ 60Hz [low voltage, enable sleep]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 13 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"   68.90  1280 1296 1328 1408  800 804 808 816
(**) fglrx(0): *Mode "1024x768": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   68.90  1024 1168 1200 1408  768 788 792 816
(**) fglrx(0): *Mode "848x480": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"   68.90  848 1080 1112 1408  480 644 648 816
(**) fglrx(0): *Mode "800x600": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   68.90  800 1056 1088 1408  600 704 708 816
(**) fglrx(0): *Mode "720x576": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"   68.90  720 1016 1048 1408  576 692 696 816
(**) fglrx(0): *Mode "720x480": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   68.90  720 1016 1048 1408  480 644 648 816
(**) fglrx(0): *Mode "640x480": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   68.90  640 976 1008 1408  480 644 648 816
(**) fglrx(0):  Default mode "640x400": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   68.90  640 976 1008 1408  400 604 608 816
(**) fglrx(0):  Default mode "640x350": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"   68.90  640 976 1008 1408  350 579 583 816
(**) fglrx(0):  Default mode "512x384": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   68.90  512 912 944 1408  384 596 600 816
(**) fglrx(0):  Default mode "400x300": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   68.90  400 856 888 1408  150 704 708 816 doublescan
(**) fglrx(0):  Default mode "320x240": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   68.90  320 816 848 1408  120 644 648 816 doublescan
(**) fglrx(0):  Default mode "320x200": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   68.90  320 816 848 1408  100 604 608 816 doublescan
(--) fglrx(0): Display dimensions: (400, 300) mm
(--) fglrx(0): DPI set to (81, 67)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 6.8.0, module version = 8.22.5
	ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): cpuSpeedMHz: 0x00000358
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xd0100000 - 0xd010ffff (0x10000) MX[B]
	[1] 0	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x32ffffff (0x32f00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xd0206000 - 0xd0207fff (0x2000) MX[B]
	[8] -1	0	0xd0200000 - 0xd0203fff (0x4000) MX[B]
	[9] -1	0	0xd020a000 - 0xd020a7ff (0x800) MX[B]
	[10] -1	0	0xd0208000 - 0xd0208fff (0x1000) MX[B]
	[11] -1	0	0xd0204000 - 0xd0205fff (0x2000) MX[B]
	[12] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[13] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[14] -1	0	0x33000000 - 0x330003ff (0x400) MX[B]
	[15] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[16] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[17] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[18] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[19] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[20] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[21] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[22] 0	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[23] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[24] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[25] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[26] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[27] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[28] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[29] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[30] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[31] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[32] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[33] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[34] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
	[35] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[36] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM Bus area:     0xd85e9000 (size=0x03a17000)
(II) fglrx(0): UMM area:     0xd85e9000 (size=0x03a17000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 6.8.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe1b3a000
(II) fglrx(0): [drm] mapped SAREA 0xe1b3a000 to 0xb7ab8000
(II) fglrx(0): [drm] framebuffer handle = 0xd8000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.22.5
(II) fglrx(0):     Date: Feb  7 2006
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.14
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xd0100000
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x3580
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000314)
(II) fglrx(0): [agp] graphics chipset has AGP v2.0
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe1e01000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x005e9000
(II) fglrx(0): Splitting WC range: base: 0xd8000000, size: 0x5e9000
(II) fglrx(0): Splitting WC range: base: 0xd8400000, size: 0x1e9000
(II) fglrx(0): Splitting WC range: base: 0xd8500000, size: 0xe9000
(II) fglrx(0): Splitting WC range: base: 0xd8580000, size: 0x69000
(II) fglrx(0): Splitting WC range: base: 0xd85c0000, size: 0x29000
(II) fglrx(0): Splitting WC range: base: 0xd85e0000, size: 0x9000
(==) fglrx(0): Write-combining range (0xd85e8000,0x1000)
(==) fglrx(0): Write-combining range (0xd85e0000,0x9000)
(==) fglrx(0): Write-combining range (0xd85c0000,0x29000)
(==) fglrx(0): Write-combining range (0xd8580000,0x69000)
(==) fglrx(0): Write-combining range (0xd8500000,0xe9000)
(==) fglrx(0): Write-combining range (0xd8400000,0x1e9000)
(==) fglrx(0): Write-combining range (0xd8000000,0x5e9000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor (scanline 800)
(II) fglrx(0): Largest offscreen area available: 1280 x 402
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): Interrupt handler installed at IRQ 6.
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Keyboard1: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) Synaptics touchpad driver version 0.14.4 (1404)
(--) SynapticMouse auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
(--) SynapticMouse touchpad found
(**) Option "AlwaysCore"
(**) SynapticMouse: always reports core events
(II) XINPUT: Adding extended input device "SynapticMouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Mouse1: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) SynapticMouse auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(--) SynapticMouse touchpad found
Could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list!
Top
Avatar utente
glpiana
Linux 3.x
Linux 3.x
Messaggi: 636
Iscritto il: lun 12 gen 2004, 0:00
Contatta:
Contatta glpiana

Re: Schermo nero uscita kde

Messaggio da glpiana »

v@le ha scritto:ho una sack 10.2 con xorg 6.8 e kernel 2.6.14
ho installato gli ultimi driver ATI per la mia 9700Moblity
l'istallazione è andata a buon fine e funziona tutto alla perfezione (3D)
all'uscita da kde, però, invece di riapparire la consolle, ho una scermata nera
fa parte dei problemi che hanno i driver ati o devo agire sul kernel?
io con una slackware 10.1, xorg 6.8 e kernel 2.6.15.6 ho lo stesso problema con la mia ati 9800 pro. quantomeno stavolta i driver si sono installati. nessuno a qualche idea o e' riuscito a risolvere?
Top
Avatar utente
Luke88
Linux 3.x
Linux 3.x
Messaggi: 624
Iscritto il: mer 7 set 2005, 0:00
Slackware: 13.0
Kernel: 2.6.30-zen4
Desktop: xfce4
Località: Udine

Messaggio da Luke88 »

no...
io invece ( xorg 6.9.2 ati 8.22.5, tutto funzionante) non ho problemi... a meno che non stia col pc acceso per più di 4-5 ore... dopo di che se esco da fluxbox crasha tutto, non posso far niente, neppure ctrl+alt+f1... lol...
w ati :lol:
P.S.: adesso che ci penso, ho avuto un problema identico al tuo, perchè mi ero dimenticato di far caricare il modulo fglrx in xorg.conf... però i miei log mi avvertivano...
prova gli ultimi, ora c'è l'8.23.7.
Meeting efficency = Average_Intelligence/( Number_Of_People^2 )
Top
Avatar utente
glpiana
Linux 3.x
Linux 3.x
Messaggi: 636
Iscritto il: lun 12 gen 2004, 0:00
Contatta:
Contatta glpiana

Messaggio da glpiana »

Luke88 ha scritto:no...
io invece ( xorg 6.9.2 ati 8.22.5, tutto funzionante) non ho problemi... a meno che non stia col pc acceso per più di 4-5 ore... dopo di che se esco da fluxbox crasha tutto, non posso far niente, neppure ctrl+alt+f1... lol...
w ati :lol:
P.S.: adesso che ci penso, ho avuto un problema identico al tuo, perchè mi ero dimenticato di far caricare il modulo fglrx in xorg.conf... però i miei log mi avvertivano...
prova gli ultimi, ora c'è l'8.23.7.
ho installato quelli! credo però che il problema sia nel kernel. mi sa che proverò a compilarne uno un po' più "datato" (per modo di dire, un 2.6.12 o un 2.6.13).
Top
Vyracocha
Linux 0.x
Linux 0.x
Messaggi: 12
Iscritto il: mer 15 mar 2006, 10:45

Messaggio da Vyracocha »

glpiana ha scritto:
Luke88 ha scritto:no...
io invece ( xorg 6.9.2 ati 8.22.5, tutto funzionante) non ho problemi... a meno che non stia col pc acceso per più di 4-5 ore... dopo di che se esco da fluxbox crasha tutto, non posso far niente, neppure ctrl+alt+f1... lol...
w ati :lol:
P.S.: adesso che ci penso, ho avuto un problema identico al tuo, perchè mi ero dimenticato di far caricare il modulo fglrx in xorg.conf... però i miei log mi avvertivano...
prova gli ultimi, ora c'è l'8.23.7.
ho installato quelli! credo però che il problema sia nel kernel. mi sa che proverò a compilarne uno un po' più "datato" (per modo di dire, un 2.6.12 o un 2.6.13).
Anch'io ho avuto lo stesso problema.Ho una radeon 9800pro,con slackware 10.2,kernel 2.6.15.4 ati drivers 8.22.5.
Ho risolto impostando questa voce in xorg.conf:

Option "UseInternalAGPGART" "yes"

Se è impostata su no,sostituiscila con yes.Inoltre assicurati di aver compilato nel kernel come moduli agpgart e intel-agp, e carica i moduli in quest'ordine:

agpgart
intel-agp
fglrx

Verica se funziona tutto con:

glxinfo | grep "direct rendering" controlla che ci sia yes

Funziona anche con i drivers 8.23.7.Nel mio caso ha risolto il problema dello schermo nero dopo il logout di kde.
Ciao.
Top
Vyracocha
Linux 0.x
Linux 0.x
Messaggi: 12
Iscritto il: mer 15 mar 2006, 10:45

Messaggio da Vyracocha »

Ops,chiedo scusa il tasto invia non funzionava.Potete cancellare i due messaggi in eccesso?.Non ho potuto cancellarli.Grazie.
Top
Avatar utente
glpiana
Linux 3.x
Linux 3.x
Messaggi: 636
Iscritto il: lun 12 gen 2004, 0:00
Contatta:
Contatta glpiana

Messaggio da glpiana »

Vyracocha ha scritto:
Funziona anche con i drivers 8.23.7.Nel mio caso ha risolto il problema dello schermo nero dopo il logout di kde.
Ciao.
grazie. stasera provo e ti faccio sapere se ho avuto successo!
Top
v@le
Linux 0.x
Linux 0.x
Messaggi: 6
Iscritto il: sab 26 nov 2005, 11:22
Località: Roma

Messaggio da v@le »

io con i moduli sto a posto
ma com'è l'esatta sintassi di UseInternalAGPGart "yes"
all'interno di xorg.conf? in quale sezione lo devo mettere?
ho povato un paio di combinazioni ma X non si avvia
perché xorg.conf ha una sintassi errata.
poi una domanda: il supporto per il frame buffer nel kernel
deve essere abilitato o no?
Top
Vyracocha
Linux 0.x
Linux 0.x
Messaggi: 12
Iscritto il: mer 15 mar 2006, 10:45

Messaggio da Vyracocha »

v@le ha scritto:io con i moduli sto a posto
ma com'è l'esatta sintassi di UseInternalAGPGart "yes"
all'interno di xorg.conf? in quale sezione lo devo mettere?
ho povato un paio di combinazioni ma X non si avvia
perché xorg.conf ha una sintassi errata.
poi una domanda: il supporto per il frame buffer nel kernel
deve essere abilitato o no?
Se hai generato la configurazione con fglrxconfig o aticonfig,
guarda dentro xorg.conf nella sezione ATI device section, voce Misc Options. Ci sarà una riga con scritto
UseInternalAGPGart controlla che sia impostato su yes.

Il framebuffer non è obbligatorio abilitarlo,solo che non potrai scegliere le modalità per avere una console ad "alta risoluzione".
Ciao. :)

P.S.
Posta la sintassi errata di Xorg.
Top
v@le
Linux 0.x
Linux 0.x
Messaggi: 6
Iscritto il: sab 26 nov 2005, 11:22
Località: Roma

Messaggio da v@le »

Fatto tutto, ho dato aticonfig --internal-agp=yes
ma niente da fare :(
Kde parte, funziona l'accelerazione 3D ATI, ma se esco da Kde ho schermo nero e non posso più fare nulla...
Top
Vyracocha
Linux 0.x
Linux 0.x
Messaggi: 12
Iscritto il: mer 15 mar 2006, 10:45

Messaggio da Vyracocha »

v@le ha scritto:Fatto tutto, ho dato aticonfig --internal-agp=yes
ma niente da fare :(
Kde parte, funziona l'accelerazione 3D ATI, ma se esco da Kde ho schermo nero e non posso più fare nulla...
Uhm prova a disabilitare il framebuffer radeon(avevi detto che avevi il framebuffer radeon statico compilato),
e abilita quello vesa(se vuoi il framebuffer.).Ricompila di nuovo i drivers e guarda se crasha di nuovo.
Ciao. :)
Top
Rispondi

Torna a “Hardware”