Ho un problema urgentissimo con un server che non vede una ASUS ES3-110 (scheda DVB)
ho provato a vedere i moduli caricati:
Codice: Seleziona tutto
Module Size Used by
nls_iso8859_1 12713 1
nls_cp437 16991 1
vfat 17585 1
fat 61512 1 vfat
usb_storage 49198 1
uas 18180 0
ext2 73795 1
snd_usb_audio 122982 0
snd_pcm 97188 1 snd_usb_audio
snd_timer 29990 1 snd_pcm
snd_page_alloc 18529 1 snd_pcm
snd_hwdep 13668 1 snd_usb_audio
snd_usbmidi_lib 25395 1 snd_usb_audio
snd_rawmidi 30748 1 snd_usbmidi_lib
snd_seq_device 14540 1 snd_rawmidi
snd 78855 7 snd_usb_audio,snd_pcm,snd_timer,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq_device
soundcore 15091 1 snd
dcdbas 14490 0
radeon 804372 1
i5000_edac 17675 0
edac_core 53746 3 i5000_edac
i5k_amb 13287 0
ttm 76949 1 radeon
drm_kms_helper 46978 1 radeon
psmouse 87692 0
drm 242038 3 radeon,ttm,drm_kms_helper
serio_raw 13211 0
i2c_algo_bit 13423 1 radeon
mac_hid 13253 0
shpchp 37277 0
lp 17799 0
parport 46562 1 lp
usbhid 47199 0
hid 99559 1 usbhid
mptsas 63612 2
mptscsih 44882 1 mptsas
mptbase 103162 2 mptsas,mptscsih
scsi_transport_sas 40558 1 mptsas
bnx2 86853 0
Codice: Seleziona tutto
0b:00.0 Multimedia controller: Philips Semiconductors SAA7231 (rev 8a)
Subsystem: ASUSTeK Computer Inc. Device 48d4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 6
Region 0: Memory at fc400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at fc000000 (64-bit, non-prefetchable) [size=4M]
Capabilities: [40] MSI: Enable- Count=1/16 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [74] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [7c] Vendor Specific Information: Len=84 <?>
Capabilities: [100 v1] Vendor Specific Information: ID=0000 Rev=0 Len=094 <?>
Ora sto provando ad aggiornare il kernel, ma non sò quanto serva...
Avete prezioni consigli?????