Mix di vecchi componenti

Usate questo forum per richieste di aiuto e consigli sull'hardware montato nelle vostre macchine con GNU/Linux Slackware.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata e la versione del Kernel. Questi dati aiutano le persone che possono rispondere.
2) Citare il tipo di hardware coinvolto in modo dettagliato.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT. Non usare termini gergali come procio, mobo e simili per identificare i componenti hardware.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Avatar utente
ZeroUno
Staff
Staff
Messaggi: 5050
Iscritto il: ven giu 02, 2006 14:52
Nome Cognome: Matteo Rossini
Slackware: current
Kernel: slack-current
Desktop: ktown-latest
Distribuzione: 01000000-current
Località: Roma / Castelli
Contatta:

Re: Mix di vecchi componenti

Messaggioda ZeroUno » sab set 12, 2015 19:44

ops, avevo visto che l'ultima era la 1.50

quella impostazione mi ero dimenticato di dirla (metti che ogni volta devo rebootare, provare, scrivermi le cose, rebootare, scriverle su google e su slacky, tranne quelle volte che scrivo con lo smartphone che non e' proprio il massimo).

Si, l'avevo provata e non funzionava.

Pero' poi ci ho ripensato... l'avevo provata con un altro disco (e si, perche' tra i componenti da provare ci sono ancora due dischi, di cui entrambi hanno problemi).

L'ho riprovato ora e funziona!!!!!
Adesso ci sono altre prove da fare con questo disco.

Bene, ora ho tre dischi da 80, questo e due ide, tutti e tre funzionanti, devo testare le performance.


Veniamo agli altri (credo entrambi irrecuperabili).
640gb wd6400aaks; questo ci mette tanto a cercarlo e poi non lo vede (ma devo fare altre prove). dopo il timeout riesco a caricare linux e vedo al dmesg che ci riprova, fallendo.
questo e' quello con cui avevo provato la modalita' raid. A suo tempo era montato su un box usb. E' possibile che abbia preso qualche botta, ma a me sembra piu' un problema di circuiti che di meccanica.

l'ultimo e' quello montato dentro questo computer dalla nascita.
maxtor STM3250310AS da 250g, prejumperato a 1.5G
il proprietario precedente lamentava frequenti blocchi di windows. poi ha cambiato computer e mi ha dato tutto a me.
ci ho messo linux e lamentavo anche io frequenti blocchi. ho notato errori tipo ext4 journaling, e andava in readonly come quando non viene piu' visto, ma con il rootfs dentro l'unica cosa che si poteva vedere era il blocco del sistema. Ora che il rootfs e' altrove posso fare altro troubleshooting quando succede un evento, ma ancora non l'ho riconnesso (per non aggiungere entropia al disco da 80).

dopo di questo giuro che i pezzi da testare sono terminati e devo solo decidere cosa buttare al secchio e cosa tenere.
Anche se anche la scheda video credo che abbia qualche problema, ma questa me la vedo con molta calma. peccato che ne ho buttate un po' poco tempo fa!!!!!!

ho ancora qualche DIMM, SIMM, 486, un floppy da 8 pollici (il floppy, non il lettore) e qualcos'altro :D, che sono anni che mia madre dice che devo buttare!
Packages finder: slakfinder.org | Slackpkg+, per aggiungere repository a slackpkg

Codice: Seleziona tutto

1011010 1100101 1110010 1101111 - 0100000 - 1010101 1101110 1101111

Avatar utente
ZeroUno
Staff
Staff
Messaggi: 5050
Iscritto il: ven giu 02, 2006 14:52
Nome Cognome: Matteo Rossini
Slackware: current
Kernel: slack-current
Desktop: ktown-latest
Distribuzione: 01000000-current
Località: Roma / Castelli
Contatta:

Re: Mix di vecchi componenti

Messaggioda ZeroUno » sab set 12, 2015 19:50

Ah in modalità raid funziona anche senza jumper... ci passa da solo a 1.5g
Packages finder: slakfinder.org | Slackpkg+, per aggiungere repository a slackpkg

Codice: Seleziona tutto

1011010 1100101 1110010 1101111 - 0100000 - 1010101 1101110 1101111

Avatar utente
ZeroUno
Staff
Staff
Messaggi: 5050
Iscritto il: ven giu 02, 2006 14:52
Nome Cognome: Matteo Rossini
Slackware: current
Kernel: slack-current
Desktop: ktown-latest
Distribuzione: 01000000-current
Località: Roma / Castelli
Contatta:

Re: Mix di vecchi componenti

Messaggioda ZeroUno » dom set 13, 2015 20:32

Alla fine sono stato costretto a chiudere tutto, quindi per ora il disco da 640 l'ho lasciato fuori; dentro ci sono 2 dischi da 80 ide, uno da 80 sata, uno da 250 sata. Il sistema lo vede correttamente, e per ora tanto basta. scoprirò poi se è usabile.


il pc A e B (i due che supportano ddr2) li ho buttati. mi sono solo tenuto il processore bruciato come souvenir. L'ho pulito e finalmente si legge cos'è
2015-09-13 01.13.28.jpg
2015-09-13 01.13.28.jpg (1.74 MiB) Visto 1340 volte
Packages finder: slakfinder.org | Slackpkg+, per aggiungere repository a slackpkg

Codice: Seleziona tutto

1011010 1100101 1110010 1101111 - 0100000 - 1010101 1101110 1101111

Avatar utente
ZeroUno
Staff
Staff
Messaggi: 5050
Iscritto il: ven giu 02, 2006 14:52
Nome Cognome: Matteo Rossini
Slackware: current
Kernel: slack-current
Desktop: ktown-latest
Distribuzione: 01000000-current
Località: Roma / Castelli
Contatta:

Re: Mix di vecchi componenti

Messaggioda ZeroUno » ven set 18, 2015 21:39

Cavolo... il disco da 80 che ero riuscito a far funzionare scalda e va in hang. lo vedo da smartctl.
Sono destinato ad usare i due dischi ide (almeno per il rootfs e la home) o aspettare l'inverno ;)

Codice: Seleziona tutto

# smartctl -x /dev/sda
smartctl 5.43 2012-06-30 r3573 [i686-linux-3.2.45-smp] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE Serial ATA
Device Model:     WDC WD800JD-60LSA5
Serial Number:    WD-WMAM9FF23356
Firmware Version: 10.01E03
User Capacity:    80,026,361,856 bytes [80.0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Sep 18 21:35:51 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x85)   Offline data collection activity
               was aborted by an interrupting command from host.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       ( 2460) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     (  33) minutes.
Conveyance self-test routine
recommended polling time:     (   6) minutes.
SCT capabilities:           (0x103f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   200   200   051    -    0
  3 Spin_Up_Time            PO----   167   164   021    -    2650
  4 Start_Stop_Count        -O--CK   100   100   000    -    668
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         POSR--   200   200   051    -    0
  9 Power_On_Hours          -O--CK   095   095   000    -    4095
 10 Spin_Retry_Count        PO--C-   100   100   051    -    0
 11 Calibration_Retry_Count -O--C-   100   100   051    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    667
190 Airflow_Temperature_Cel -O---K   047   026   045    Past 53
194 Temperature_Celsius     -O---K   090   069   000    -    53
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--C-   200   200   000    -    0
198 Offline_Uncorrectable   ----C-   200   200   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   198   000    -    29
200 Multi_Zone_Error_Rate   P--R--   200   200   051    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has    5 sectors [Comprehensive SMART error log]
GP    Log at address 0x03 has    6 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has    1 sectors [SMART self-test log]
GP    Log at address 0x07 has    1 sectors [Extended self-test log]
SMART Log at address 0x09 has    1 sectors [Selective self-test log]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0xa0 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa1 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa2 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa3 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa4 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa5 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa6 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa7 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa8 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xa9 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xaa has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xab has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xac has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xad has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xae has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xaf has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb0 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb1 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb2 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb3 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb4 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb5 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb6 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb7 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc0 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 4
   CR     = Command Register
   FEATR  = Features Register
   COUNT  = Count (was: Sector Count) Register
   LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
   LH     = LBA High (was: Cylinder High) Register    ]   LBA
   LM     = LBA Mid (was: Cylinder Low) Register      ] Register
   LL     = LBA Low (was: Sector Number) Register     ]
   DV     = Device (was: Device/Head) Register
   DC     = Device Control Register
   ER     = Error register
   ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 00 01 01 00 51 00 00 e0 00 00 00 

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  00 4b 29 1b 45 00 00 00 00 00 00 00 00     00:00:00.000  NOP [Reserved subcommand]
  00 01 00 00 01 1b 06 00 1e 25 00 00 00     00:00:00.257  NOP [Abort queued commands]
  00 3c 25 1a bc 00 00 00 00 00 00 00 00     00:29:33.800  NOP [Reserved subcommand]
  00 01 00 00 00 1a 3c 00 bc 25 00 00 00     00:00:00.001  NOP [Abort queued commands]

Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 00 01 01 00 51 00 00 e0 00 00 00 

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  00 0f 29 0b 4e 00 00 00 00 00 00 00 00     00:00:00.000  NOP [Reserved subcommand]
  00 01 00 00 01 0b ca 00 26 25 00 00 00     00:00:00.257  NOP [Abort queued commands]
  00 da 25 0a 79 00 00 00 00 00 00 00 00     00:12:07.468  NOP [Reserved subcommand]
  00 01 00 00 00 0a d9 00 79 25 00 00 00     00:00:00.001  NOP [Abort queued commands]

Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 00 01 01 00 51 00 00 e0 00 00 00 

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  00 62 29 05 2f 00 00 00 00 00 00 00 00     00:00:00.000  NOP [Reserved subcommand]
  00 01 00 00 01 05 1d 00 08 25 00 00 00     00:00:00.257  NOP [Abort queued commands]
  00 8c 25 02 75 00 00 00 00 00 00 00 00     00:05:26.398  NOP [Reserved subcommand]
  00 01 00 00 00 02 8c 00 75 25 00 00 00     00:00:00.001  NOP [Abort queued commands]

Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 00 01 01 00 51 00 00 e0 00 00 00 

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  00 52 29 04 18 00 00 00 00 00 00 00 00     00:00:00.000  NOP [Reserved subcommand]
  00 01 00 00 01 03 0d 00 f1 25 00 00 00     00:00:00.257  NOP [Abort queued commands]
  00 62 25 03 7d 00 00 00 00 00 00 00 00     00:04:14.960  NOP [Reserved subcommand]
  00 01 00 00 00 03 5c 00 7d 25 00 00 00     00:00:00.001  NOP [Abort queued commands]

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Conveyance offline  Completed without error       00%      4095         -
# 2  Conveyance offline  Aborted by host               90%      4095         -
# 3  Short offline       Completed without error       00%      4095         -
# 4  Short offline       Completed without error       00%       115         -
# 5  Extended offline    Interrupted (host reset)      40%         1         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                 53 Celsius
Power Cycle Max Temperature:         61 Celsius
Lifetime    Max Temperature:         78 Celsius
SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      5/65 Celsius
Min/Max Temperature Limit:            1/70 Celsius
Temperature History Size (Index):    128 (36)

Index    Estimated Time   Temperature Celsius
  37    2015-09-18 19:28    53  **********************************
 ...    ..(  2 skipped).    ..  **********************************
  40    2015-09-18 19:31    53  **********************************
  41    2015-09-18 19:32    52  *********************************
  42    2015-09-18 19:33    51  ********************************
  43    2015-09-18 19:34    50  *******************************
 ...    ..( 15 skipped).    ..  *******************************
  59    2015-09-18 19:50    50  *******************************
  60    2015-09-18 19:51     ?  -
  61    2015-09-18 19:52    23  ****
  62    2015-09-18 19:53    24  *****
  63    2015-09-18 19:54    26  *******
  64    2015-09-18 19:55    28  *********
  65    2015-09-18 19:56    29  **********
  66    2015-09-18 19:57    29  **********
  67    2015-09-18 19:58    30  ***********
  68    2015-09-18 19:59    32  *************
  69    2015-09-18 20:00    33  **************
  70    2015-09-18 20:01    34  ***************
  71    2015-09-18 20:02    34  ***************
  72    2015-09-18 20:03    35  ****************
  73    2015-09-18 20:04    36  *****************
  74    2015-09-18 20:05    36  *****************
  75    2015-09-18 20:06    37  ******************
  76    2015-09-18 20:07    38  *******************
  77    2015-09-18 20:08    38  *******************
  78    2015-09-18 20:09    38  *******************
  79    2015-09-18 20:10    39  ********************
  80    2015-09-18 20:11    40  *********************
  81    2015-09-18 20:12    40  *********************
  82    2015-09-18 20:13    40  *********************
  83    2015-09-18 20:14    41  **********************
  84    2015-09-18 20:15    42  ***********************
  85    2015-09-18 20:16    42  ***********************
  86    2015-09-18 20:17    42  ***********************
  87    2015-09-18 20:18    43  ************************
  88    2015-09-18 20:19    44  *************************
 ...    ..(  3 skipped).    ..  *************************
  92    2015-09-18 20:23    44  *************************
  93    2015-09-18 20:24    45  **************************
  94    2015-09-18 20:25    46  ***************************
 ...    ..(  3 skipped).    ..  ***************************
  98    2015-09-18 20:29    46  ***************************
  99    2015-09-18 20:30    47  ****************************
 100    2015-09-18 20:31    48  *****************************
 ...    ..(  8 skipped).    ..  *****************************
 109    2015-09-18 20:40    48  *****************************
 110    2015-09-18 20:41    49  ******************************
 111    2015-09-18 20:42    50  *******************************
 ...    ..( 19 skipped).    ..  *******************************
   3    2015-09-18 21:02    50  *******************************
   4    2015-09-18 21:03    51  ********************************
   5    2015-09-18 21:04    52  *********************************
   6    2015-09-18 21:05    53  **********************************
 ...    ..(  3 skipped).    ..  **********************************
  10    2015-09-18 21:09    53  **********************************
  11    2015-09-18 21:10    55  ************************************
  12    2015-09-18 21:11    57  **************************************
  13    2015-09-18 21:12    57  **************************************
  14    2015-09-18 21:13    55  ************************************
  15    2015-09-18 21:14    53  **********************************
 ...    ..( 10 skipped).    ..  **********************************
  26    2015-09-18 21:25    53  **********************************
  27    2015-09-18 21:26    56  *************************************
  28    2015-09-18 21:27    60  ***************************************+
  29    2015-09-18 21:28    61  ***************************************+
  30    2015-09-18 21:29    60  ***************************************+
  31    2015-09-18 21:30    56  *************************************
  32    2015-09-18 21:31    55  ************************************
  33    2015-09-18 21:32    53  **********************************
 ...    ..(  2 skipped).    ..  **********************************
  36    2015-09-18 21:35    53  **********************************

SCT Error Recovery Control:
           Read:     75 (7.5 seconds)
          Write:     75 (7.5 seconds)

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x000a  2            9  Device-to-host register FISes sent due to a COMRESET
0x8000  4         6631  Vendor specific
Packages finder: slakfinder.org | Slackpkg+, per aggiungere repository a slackpkg

Codice: Seleziona tutto

1011010 1100101 1110010 1101111 - 0100000 - 1010101 1101110 1101111

Avatar utente
ZeroUno
Staff
Staff
Messaggi: 5050
Iscritto il: ven giu 02, 2006 14:52
Nome Cognome: Matteo Rossini
Slackware: current
Kernel: slack-current
Desktop: ktown-latest
Distribuzione: 01000000-current
Località: Roma / Castelli
Contatta:

Re: Mix di vecchi componenti

Messaggioda ZeroUno » sab set 19, 2015 13:43

Ok, non c'entra niente.

Il fatto che il sistema si blocca perché il fs va in readonly non regge, allora ho pensato plausibile che si blocca se la swap messa sullo stesso disco non risponde.
Oggi è crollato pure quello.

Poco fa, computer appena acceso (quindi freddo), fatto partire l'instraller di slackware64 current, sistema frezzato mentre sceglievo il layout della tastiera, quindi prima di accedere ai dischi veramente.

Non può essere problemi di temperatura.


Edit. Aggiungo che quando si blocca, la tastiera funziona, nel senso che se premo capslock la spia si accende, ma il sistema non reagisce.
Packages finder: slakfinder.org | Slackpkg+, per aggiungere repository a slackpkg

Codice: Seleziona tutto

1011010 1100101 1110010 1101111 - 0100000 - 1010101 1101110 1101111