Da qualche giorno il mio tablet cinese ha smesso di funzionare, e si blocca sulla schermata di avvio, ho provato ad entrare nel menu per fare hard reset con la combinazione di tasti ma non c'è stato verso.
Mi è stato detto che potrebbe essere la nand flash che è andata, e che si potrebbe tentare con fsck, per vedere di riparare il fs.
Il problema è che quando vado a connetterlo mi appare come usb in thunar ma non riesco ad accedervi nemmeno come root...
mi ritorna "unable to open MTP device '[usb:001,014]'"
Questo è il mio lsusb e viene rilevato come Onda
Codice: Seleziona tutto
bash-4.3$ lsusb
Bus 004 Device 004: ID 0bda:0177 Realtek Semiconductor Corp.
Bus 004 Device 003: ID 0c45:651b Microdia
Bus 004 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 8087:0a2a Intel Corp.
Bus 003 Device 003: ID 046d:c051 Logitech, Inc. G3 (MX518) Optical Mouse
Bus 003 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 015: ID 1f3a:1007 Onda (unverified)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
bash-4.3$
Codice: Seleziona tutto
bash-4.3$ mtp-detect
libmtp version: 1.1.11
Listing raw device(s)
Device 0 (VID=1f3a and PID=1007) is UNKNOWN in libmtp v1.1.11.
Please report this VID/PID and the device model to the libmtp development team
Found 1 device(s):
1f3a:1007 @ bus 1, dev 15
Attempting to connect device(s)
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
inep: usb_get_endpoint_status(): Resource temporarily unavailable
outep: usb_get_endpoint_status(): No such device
libusb_open() failed!: No such device
LIBMTP PANIC: Could not init USB on second attempt
Unable to open raw device 0
OK.
bash-4.3$
Codice: Seleziona tutto
bash-4.3$ mtp-connect
Your system does not appear to have UTF-8 enabled ($LANG="en_US")
If you want to have support for diacritics and Unicode characters,
please switch your locale to an UTF-8 locale, e.g. "en_US.UTF-8".
libmtp version: 1.1.11
Device 0 (VID=1f3a and PID=1007) is UNKNOWN in libmtp v1.1.11.
Please report this VID/PID and the device model to the libmtp development team
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
inep: usb_get_endpoint_status(): Resource temporarily unavailable
outep: usb_get_endpoint_status(): No such device
libusb_open() failed!: No such device
LIBMTP PANIC: Could not init USB on second attempt
No devices.
bash-4.3$
E sopratutto ammesso di riusciread accedere, è corretto agire con fsck?
Grazie per l'aiuto o anche solo per una indicazione...
Saluti
Michele