versione slackware: 13.37
kernel:
Codice: Seleziona tutto
kilam@darkstar:~$ uname -r
2.6.37.6-smp
La scheda viene riconosciuta dal sistema ma non viene riscontrato alcun link. (led della scheda mai acceso)
Codice: Seleziona tutto
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Codice: Seleziona tutto
root@darkstar:/home/kilam\ # ifconfig -a
eth1 Link encap:Ethernet HWaddr XXXXXXXXXXXX
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Codice: Seleziona tutto
root@darkstar:/home/kilam\ # dmesg | grep eth1
[92211.702414] ADDRCONF(NETDEV_UP): eth1: link is not ready
Codice: Seleziona tutto
bash-4.1# ethtool eth1
Settings for eth1:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Half
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
Il cavo di rete ed il router sono funzionanti al 100% in quanto testati sul notebook da cui scrivo.
Le prove fatte manipolando la velocità ed il duplex con ethtool non hanno prodotto risultati.
La situazione non cambia con distribuzioni live come Knoppix , dedian Lenny ,
mi potete aiutare grazie