Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Gnu/Linux in genere, se l'argomento è specifico alla Slackware usate uno dei forum Slackware o Slackware64.
3) Leggere attentamente le risposte ricevute
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.
La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Strano, la lista delle directory condivise te la deve dare. Sei sicuro che il servizio sia attivo sul NAS? Dallo screenshot che hai incollato prima si vede la sezione riguardante NFS, ma quella Windows file service?
bash-4.2$ nmap 192.168.1.170
Starting Nmap 6.40 ( http://nmap.org ) at 2014-07-18 07:14 CEST
Nmap scan report for DiskStation (192.168.1.170)
Host is up (0.0024s latency).
Not shown: 990 closed ports
PORT STATE SERVICE
80/tcp open http
111/tcp open rpcbind
139/tcp open netbios-ssn
445/tcp open microsoft-ds
515/tcp open printer
548/tcp open afp
631/tcp open ipp
2049/tcp open nfs
5000/tcp open upnp
5432/tcp open postgresql
Nmap done: 1 IP address (1 host up) scanned in 0.10 seconds
bash-4.2$
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: LINUX2
workgroup = MYGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Specifies the Kerberos or Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
rik70 ha scritto:Hai solo admin come utente del Nas?
A me viene il dubbio che prima debba creare utenti e/o gruppi e successivamente attribuirgli risorse da condividere e privilegi.
Per esempio: c'è un utente che si chiama "guest" o qualcosa di simile? Una directory 'public'?
L'utente admin dovrebbe essere limitato all'amministrazione del Nas. Ma vado ad intuito.
Ovviamente se da altre macchine riesce a montare il nas, allora come non detto: il problema è altrove.
Uh uh... Mi sa che hai ragione. Ho creato un nuovo utente con accesso ad un paio di directory (Dati_recuperati e FAT ed ho ridato il comando
bash-4.2$ smbclient -L 192.168.1.170 -U --con il nome del novo utente (leonascasa) ecco l' output:
bash-4.2$ smbclient -L 192.168.1.170 -U leonascasa
Enter leonascasa's password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.2.8]
Sharename Type Comment
--------- ---- -------
IPC$ IPC IPC Service ()
WNDOWS_21SETTEMBRE2013 Disk backup
video Disk System default shared folder
sette_users_leo Disk win7_contenuto_dir_Leo
Public Disk
PISTOLA Disk all RR marche
photo Disk System default shared folder
OLYMPUS Disk multimedia da zx-2
Nikon Transfer Disk le foto dalla D7000
music Disk System default shared folder
MICRO-SD_8mag2014 Disk
Luca Disk
LEO_DOC Disk LEO_DOC_da_setteplus
Leo2 Disk
leo14_00_22feb2013 Disk
I_setteplus_12nov12 Disk
homes Disk user home
FILE_80GB Disk
FAT Disk 19nov2012
Dati_recuperati Disk vecchio_hdd_esterno
ARCHIVIO_E_14-1-14 Disk backup-del14-1
home Disk home
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.2.8]
Server Comment
--------- -------
PC-LUCA
DISKSTATION
Workgroup Master
--------- -------
WORKGROUP PC-LUCA
bash-4.2$
Ho provato poi a dare il comando:
mount.cifs //192.168.1.170.........
consigliatomi da naitso e riesco ad entrare nelle directory.
Direi che posso scrivere [RISOLTO] che dite?