[RISOLTO] Problema driver Nvidia

Savius · Messaggio da **Savius** » lun 9 feb 2009, 12:47

Salve a tutti,
da un po' di tempo a questa parte ho notato che, almeno una volta al giorno, il sistema vada in crash costringendomi a resettarlo... Quel che succede di preciso è che termina il Server X e mostra una schermata nera in cui in alto a sinistra c'è un cursore che lampeggia per qualche secondo prima di fermarsi. Ho notato che questo cursore passa da un bianco acceso a un grigio come un effetto dissolvenza prima di bloccarsi definitivamente. Per ritornare operativo uso le combinazioni magiche (ALT + SysReq + S <due volte>; ALT + SysReq + U; ALT + SysReq + B) dato che non mi è possibile scrivere alcun comando e il NumLock e gli altri led non si accendono ne spengono se digito i tasti a loro relativi. Controllando i vari log non riscontro particolari problemi una volta avviato il sistema e il mio sospetto è che sia dovuto o alla scheda video o alla RAM... Ci tengo a precisare che il PC è "nuovo" in tutte le sue componenti e che, a parte questo problema saltuario, funziona alla perfezione.

I crash finora si son verificati in situazioni apparentemente normali quali quelle di navigazione con Firefox, lettura di pdf, etc...

Per maggiori dettagli vi allego alcuni log.

Questo è il syslog di oggi (il problema si è verificato verso le 12:20:

Codice: Seleziona tutto

Feb  9 10:57:30 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1038605
Feb  9 10:57:30 localhost kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Feb  9 10:57:30 localhost kernel: Detected 3172.523 MHz processor.
Feb  9 10:57:30 localhost kernel: Console: colour dummy device 80x25
Feb  9 10:57:30 localhost kernel: Mount-cache hash table entries: 512
Feb  9 10:57:30 localhost kernel: ENABLING IO-APIC IRQs
Feb  9 10:57:30 localhost kernel: ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 7A, should be 71 [20080609]
Feb  9 10:57:30 localhost kernel: ACPI: RTC can wake from S4
Feb  9 10:57:30 localhost kernel: highmem bounce pool size: 64 pages
Feb  9 10:57:30 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb  9 10:57:30 localhost kernel: GFS2 (built Jan 21 2009 20:03:08) installed
Feb  9 10:57:30 localhost kernel: Console: switching to colour frame buffer device 128x48
Feb  9 10:57:30 localhost kernel: Compaq SMART2 Driver (v 2.6.0)
Feb  9 10:57:30 localhost kernel: ide-floppy driver 1.00
Feb  9 10:57:30 localhost kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
Feb  9 10:57:30 localhost kernel: scsi: <fdomain> Detection failed (no card)
Feb  9 10:57:30 localhost kernel: Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Feb  9 10:57:30 localhost kernel: Copyright(c) 2004-2008 Emulex.  All rights reserved.
Feb  9 10:57:30 localhost kernel: Failed initialization of WD-7000 SCSI card!
Feb  9 10:57:30 localhost kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
Feb  9 10:57:30 localhost kernel: 3ware Storage Controller device driver for Linux v1.26.02.002.
Feb  9 10:57:30 localhost kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
Feb  9 10:57:30 localhost kernel: Driver 'st' needs updating - please use bus_type methods
Feb  9 10:57:30 localhost kernel: Driver 'sd' needs updating - please use bus_type methods
Feb  9 10:57:30 localhost kernel: Driver 'sr' needs updating - please use bus_type methods
Feb  9 10:57:30 localhost kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Feb  9 10:57:30 localhost kernel: sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Feb  9 10:57:30 localhost kernel: raid6: int32x1   1183 MB/s
Feb  9 10:57:30 localhost kernel: raid6: int32x2   1103 MB/s
Feb  9 10:57:30 localhost kernel: raid6: int32x4    904 MB/s
Feb  9 10:57:30 localhost kernel: raid6: int32x8    857 MB/s
Feb  9 10:57:30 localhost kernel: raid6: mmxx1     3942 MB/s
Feb  9 10:57:30 localhost kernel: raid6: mmxx2     4560 MB/s
Feb  9 10:57:30 localhost kernel: raid6: sse1x1    2753 MB/s
Feb  9 10:57:30 localhost kernel: raid6: sse1x2    3554 MB/s
Feb  9 10:57:30 localhost kernel: raid6: sse2x1    5084 MB/s
Feb  9 10:57:30 localhost kernel: raid6: sse2x2    5603 MB/s
Feb  9 10:57:30 localhost kernel: raid6: using algorithm sse2x2 (5603 MB/s)
Feb  9 10:57:30 localhost kernel: Using IPI No-Shortcut mode
Feb  9 10:57:30 localhost kernel: VFS: Mounted root (ext3 filesystem) readonly.
Feb  9 10:57:30 localhost kernel: ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
Feb  9 10:57:30 localhost kernel: nvidia: module license 'NVIDIA' taints kernel.
Feb  9 10:57:30 localhost kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module  177.82  Tue Nov  4 13:35:57 PST 2008
Feb  9 10:57:30 localhost kernel: ACPI: SSDT CFF8E0D0, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
Feb  9 10:57:30 localhost kernel: ACPI: SSDT CFF8E2B0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
Feb  9 10:57:30 localhost kernel: fuse init (API version 7.9)
Feb  9 10:57:43 localhost dnsmasq[3074]: failed to create listening socket: Address already in use
Feb  9 10:57:43 localhost dnsmasq[3074]: FAILED to start up
Feb  9 12:19:52 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1038605
Feb  9 12:19:52 localhost kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Feb  9 12:19:52 localhost kernel: Detected 3172.526 MHz processor.
Feb  9 12:19:52 localhost kernel: Console: colour dummy device 80x25
Feb  9 12:19:52 localhost kernel: Mount-cache hash table entries: 512
Feb  9 12:19:52 localhost kernel: ENABLING IO-APIC IRQs
Feb  9 12:19:52 localhost kernel: ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 7A, should be 71 [20080609]
Feb  9 12:19:52 localhost kernel: ACPI: RTC can wake from S4
Feb  9 12:19:52 localhost kernel: highmem bounce pool size: 64 pages
Feb  9 12:19:52 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb  9 12:19:52 localhost kernel: GFS2 (built Jan 21 2009 20:03:08) installed
Feb  9 12:19:52 localhost kernel: Console: switching to colour frame buffer device 128x48
Feb  9 12:19:52 localhost kernel: Compaq SMART2 Driver (v 2.6.0)
Feb  9 12:19:52 localhost kernel: ide-floppy driver 1.00
Feb  9 12:19:52 localhost kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
Feb  9 12:19:52 localhost kernel: scsi: <fdomain> Detection failed (no card)
Feb  9 12:19:52 localhost kernel: Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Feb  9 12:19:52 localhost kernel: Copyright(c) 2004-2008 Emulex.  All rights reserved.
Feb  9 12:19:52 localhost kernel: Failed initialization of WD-7000 SCSI card!
Feb  9 12:19:52 localhost kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
Feb  9 12:19:52 localhost kernel: 3ware Storage Controller device driver for Linux v1.26.02.002.
Feb  9 12:19:52 localhost kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
Feb  9 12:19:52 localhost kernel: Driver 'st' needs updating - please use bus_type methods
Feb  9 12:19:52 localhost kernel: Driver 'sd' needs updating - please use bus_type methods
Feb  9 12:19:52 localhost kernel: Driver 'sr' needs updating - please use bus_type methods
Feb  9 12:19:52 localhost kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Feb  9 12:19:52 localhost kernel: sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Feb  9 12:19:52 localhost kernel: raid6: int32x1   1183 MB/s
Feb  9 12:19:52 localhost kernel: raid6: int32x2   1103 MB/s
Feb  9 12:19:52 localhost kernel: raid6: int32x4    905 MB/s
Feb  9 12:19:52 localhost kernel: raid6: int32x8    858 MB/s
Feb  9 12:19:52 localhost kernel: raid6: mmxx1     3943 MB/s
Feb  9 12:19:52 localhost kernel: raid6: mmxx2     4562 MB/s
Feb  9 12:19:52 localhost kernel: raid6: sse1x1    2753 MB/s
Feb  9 12:19:52 localhost kernel: raid6: sse1x2    3557 MB/s
Feb  9 12:19:52 localhost kernel: raid6: sse2x1    5082 MB/s
Feb  9 12:19:52 localhost kernel: raid6: sse2x2    5604 MB/s
Feb  9 12:19:52 localhost kernel: raid6: using algorithm sse2x2 (5604 MB/s)
Feb  9 12:19:52 localhost kernel: Using IPI No-Shortcut mode
Feb  9 12:19:52 localhost kernel: VFS: Mounted root (ext3 filesystem) readonly.
Feb  9 12:19:52 localhost kernel: ACPI: SSDT CFF8E0D0, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
Feb  9 12:19:52 localhost kernel: ACPI: SSDT CFF8E2B0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
Feb  9 12:19:52 localhost kernel: nvidia: module license 'NVIDIA' taints kernel.
Feb  9 12:19:52 localhost kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module  177.82  Tue Nov  4 13:35:57 PST 2008
Feb  9 12:19:52 localhost kernel: ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
Feb  9 12:19:52 localhost kernel: fuse init (API version 7.9)
Feb  9 12:20:01 localhost dnsmasq[3035]: failed to create listening socket: Address already in use
Feb  9 12:20:01 localhost dnsmasq[3035]: FAILED to start up

Questo è molto lungo sorry... Xorg.0.log:

Codice: Seleziona tutto

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Slackware 12.1 Slackware Linux Project
Current Operating System: Linux localhost 2.6.27.12-smp #1 SMP Wed Jan 21 20:13:03 CET 2009 i686
Build Date: 30 June 2008  11:35:29PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb  9 12:23:02 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/TTF,/usr/share/fonts/OTF,/usr/share/fonts/Type1,/usr/share/fonts/misc,/usr/share/fonts/75dpi/:unscaled.
(**) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d0280
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,29c0 card 1043,8276 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,29c1 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1a:0: chip 8086,2937 card 1043,8277 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2938 card 1043,8277 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1a:2: chip 8086,2939 card 1043,8277 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,293c card 1043,8277 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,293e card 1043,829f rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,2940 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2948 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:5: chip 8086,294a card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2934 card 1043,8277 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2935 card 1043,8277 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2936 card 1043,8277 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,293a card 1043,8277 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 92 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2918 card 1043,8277 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,2921 card 1043,8277 rev 02 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,2930 card 1043,8277 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2926 card 1043,8277 rev 02 class 01,01,85 hdr 00
(II) PCI: 01:00:0: chip 10de,0622 card 1acc,9601 rev a1 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 11ab,4364 card 1043,81f8 rev 12 class 02,00,00 hdr 00
(II) PCI: 03:00:0: chip 11ab,6101 card 1043,82e0 rev b2 class 01,01,8f hdr 00
(II) PCI: 05:03:0: chip 1106,3044 card 1043,81fe rev c0 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000b000 - 0x0000bfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xfa000000 - 0xfe8fffff (0x4900000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 4 prefetchable memory range:
	[0] -1	0	0xf8f00000 - 0xf8ffffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:4), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 I/O range:
	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 3 non-prefetchable memory range:
	[0] -1	0	0xfea00000 - 0xfeafffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:5), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0	0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xfe900000 - 0xfe9fffff (0x100000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:30:0), (0,5,5), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 5 I/O range:
	[0] -1	0	0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 5 non-prefetchable memory range:
	[0] -1	0	0xfeb00000 - 0xfebfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x0622) rev 161, Mem @ 0xfd000000/24, 0xd0000000/28, 0xfa000000/25, I/O @ 0xbc00/7, BIOS @ 0xfe880000/19
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xfebff800 - 0xfebfffff (0x800) MX[B]
	[1] -1	0	0xfeaffc00 - 0xfeaffdff (0x200) MX[B]
	[2] -1	0	0xfe9fc000 - 0xfe9fffff (0x4000) MX[B]
	[3] -1	0	0xf9fff400 - 0xf9fff4ff (0x100) MX[B]
	[4] -1	0	0xf9fff800 - 0xf9fffbff (0x400) MX[B]
	[5] -1	0	0xf9ff8000 - 0xf9ffbfff (0x4000) MX[B]
	[6] -1	0	0xf9fffc00 - 0xf9ffffff (0x400) MX[B]
	[7] -1	0	0xfe880000 - 0xfe8fffff (0x80000) MX[B](B)
	[8] -1	0	0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[10] -1	0	0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
	[11] -1	0	0x0000ec00 - 0x0000ec7f (0x80) IX[B]
	[12] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[13] -1	0	0x0000d480 - 0x0000d483 (0x4) IX[B]
	[14] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[15] -1	0	0x0000d880 - 0x0000d883 (0x4) IX[B]
	[16] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[17] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[18] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[19] -1	0	0x00009480 - 0x0000948f (0x10) IX[B]
	[20] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[21] -1	0	0x00009880 - 0x00009887 (0x8) IX[B]
	[22] -1	0	0x00009c00 - 0x00009c03 (0x4) IX[B]
	[23] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[24] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[25] -1	0	0x00008400 - 0x0000840f (0x10) IX[B]
	[26] -1	0	0x00008480 - 0x0000848f (0x10) IX[B]
	[27] -1	0	0x00008800 - 0x00008803 (0x4) IX[B]
	[28] -1	0	0x00008880 - 0x00008887 (0x8) IX[B]
	[29] -1	0	0x00008c00 - 0x00008c03 (0x4) IX[B]
	[30] -1	0	0x00009000 - 0x00009007 (0x8) IX[B]
	[31] -1	0	0x0000a480 - 0x0000a49f (0x20) IX[B]
	[32] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[33] -1	0	0x0000a080 - 0x0000a09f (0x20) IX[B]
	[34] -1	0	0x0000ac00 - 0x0000ac1f (0x20) IX[B]
	[35] -1	0	0x0000a880 - 0x0000a89f (0x20) IX[B]
	[36] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[37] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xfebff800 - 0xfebfffff (0x800) MX[B]
	[1] -1	0	0xfeaffc00 - 0xfeaffdff (0x200) MX[B]
	[2] -1	0	0xfe9fc000 - 0xfe9fffff (0x4000) MX[B]
	[3] -1	0	0xf9fff400 - 0xf9fff4ff (0x100) MX[B]
	[4] -1	0	0xf9fff800 - 0xf9fffbff (0x400) MX[B]
	[5] -1	0	0xf9ff8000 - 0xf9ffbfff (0x4000) MX[B]
	[6] -1	0	0xf9fffc00 - 0xf9ffffff (0x400) MX[B]
	[7] -1	0	0xfe880000 - 0xfe8fffff (0x80000) MX[B](B)
	[8] -1	0	0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[10] -1	0	0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
	[11] -1	0	0x0000ec00 - 0x0000ec7f (0x80) IX[B]
	[12] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[13] -1	0	0x0000d480 - 0x0000d483 (0x4) IX[B]
	[14] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[15] -1	0	0x0000d880 - 0x0000d883 (0x4) IX[B]
	[16] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[17] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[18] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[19] -1	0	0x00009480 - 0x0000948f (0x10) IX[B]
	[20] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[21] -1	0	0x00009880 - 0x00009887 (0x8) IX[B]
	[22] -1	0	0x00009c00 - 0x00009c03 (0x4) IX[B]
	[23] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[24] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[25] -1	0	0x00008400 - 0x0000840f (0x10) IX[B]
	[26] -1	0	0x00008480 - 0x0000848f (0x10) IX[B]
	[27] -1	0	0x00008800 - 0x00008803 (0x4) IX[B]
	[28] -1	0	0x00008880 - 0x00008887 (0x8) IX[B]
	[29] -1	0	0x00008c00 - 0x00008c03 (0x4) IX[B]
	[30] -1	0	0x00009000 - 0x00009007 (0x8) IX[B]
	[31] -1	0	0x0000a480 - 0x0000a49f (0x20) IX[B]
	[32] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[33] -1	0	0x0000a080 - 0x0000a09f (0x20) IX[B]
	[34] -1	0	0x0000ac00 - 0x0000ac1f (0x20) IX[B]
	[35] -1	0	0x0000a880 - 0x0000a89f (0x20) IX[B]
	[36] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[37] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfebff800 - 0xfebfffff (0x800) MX[B]
	[5] -1	0	0xfeaffc00 - 0xfeaffdff (0x200) MX[B]
	[6] -1	0	0xfe9fc000 - 0xfe9fffff (0x4000) MX[B]
	[7] -1	0	0xf9fff400 - 0xf9fff4ff (0x100) MX[B]
	[8] -1	0	0xf9fff800 - 0xf9fffbff (0x400) MX[B]
	[9] -1	0	0xf9ff8000 - 0xf9ffbfff (0x4000) MX[B]
	[10] -1	0	0xf9fffc00 - 0xf9ffffff (0x400) MX[B]
	[11] -1	0	0xfe880000 - 0xfe8fffff (0x80000) MX[B](B)
	[12] -1	0	0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
	[13] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[14] -1	0	0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x0000ec00 - 0x0000ec7f (0x80) IX[B]
	[18] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[19] -1	0	0x0000d480 - 0x0000d483 (0x4) IX[B]
	[20] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[21] -1	0	0x0000d880 - 0x0000d883 (0x4) IX[B]
	[22] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[23] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[24] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[25] -1	0	0x00009480 - 0x0000948f (0x10) IX[B]
	[26] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[27] -1	0	0x00009880 - 0x00009887 (0x8) IX[B]
	[28] -1	0	0x00009c00 - 0x00009c03 (0x4) IX[B]
	[29] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[30] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[31] -1	0	0x00008400 - 0x0000840f (0x10) IX[B]
	[32] -1	0	0x00008480 - 0x0000848f (0x10) IX[B]
	[33] -1	0	0x00008800 - 0x00008803 (0x4) IX[B]
	[34] -1	0	0x00008880 - 0x00008887 (0x8) IX[B]
	[35] -1	0	0x00008c00 - 0x00008c03 (0x4) IX[B]
	[36] -1	0	0x00009000 - 0x00009007 (0x8) IX[B]
	[37] -1	0	0x0000a480 - 0x0000a49f (0x20) IX[B]
	[38] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[39] -1	0	0x0000a080 - 0x0000a09f (0x20) IX[B]
	[40] -1	0	0x0000ac00 - 0x0000ac1f (0x20) IX[B]
	[41] -1	0	0x0000a880 - 0x0000a89f (0x20) IX[B]
	[42] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[43] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  177.82  Tue Nov  4 14:03:48 PST 2008
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.3.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver  177.82  Tue Nov  4 13:42:45 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfebff800 - 0xfebfffff (0x800) MX[B]
	[5] -1	0	0xfeaffc00 - 0xfeaffdff (0x200) MX[B]
	[6] -1	0	0xfe9fc000 - 0xfe9fffff (0x4000) MX[B]
	[7] -1	0	0xf9fff400 - 0xf9fff4ff (0x100) MX[B]
	[8] -1	0	0xf9fff800 - 0xf9fffbff (0x400) MX[B]
	[9] -1	0	0xf9ff8000 - 0xf9ffbfff (0x4000) MX[B]
	[10] -1	0	0xf9fffc00 - 0xf9ffffff (0x400) MX[B]
	[11] -1	0	0xfe880000 - 0xfe8fffff (0x80000) MX[B](B)
	[12] -1	0	0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
	[13] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[14] -1	0	0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x0000ec00 - 0x0000ec7f (0x80) IX[B]
	[18] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[19] -1	0	0x0000d480 - 0x0000d483 (0x4) IX[B]
	[20] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[21] -1	0	0x0000d880 - 0x0000d883 (0x4) IX[B]
	[22] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[23] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[24] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[25] -1	0	0x00009480 - 0x0000948f (0x10) IX[B]
	[26] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[27] -1	0	0x00009880 - 0x00009887 (0x8) IX[B]
	[28] -1	0	0x00009c00 - 0x00009c03 (0x4) IX[B]
	[29] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[30] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[31] -1	0	0x00008400 - 0x0000840f (0x10) IX[B]
	[32] -1	0	0x00008480 - 0x0000848f (0x10) IX[B]
	[33] -1	0	0x00008800 - 0x00008803 (0x4) IX[B]
	[34] -1	0	0x00008880 - 0x00008887 (0x8) IX[B]
	[35] -1	0	0x00008c00 - 0x00008c03 (0x4) IX[B]
	[36] -1	0	0x00009000 - 0x00009007 (0x8) IX[B]
	[37] -1	0	0x0000a480 - 0x0000a49f (0x20) IX[B]
	[38] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[39] -1	0	0x0000a080 - 0x0000a09f (0x20) IX[B]
	[40] -1	0	0x0000ac00 - 0x0000ac1f (0x20) IX[B]
	[41] -1	0	0x0000a880 - 0x0000a89f (0x20) IX[B]
	[42] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[43] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfebff800 - 0xfebfffff (0x800) MX[B]
	[5] -1	0	0xfeaffc00 - 0xfeaffdff (0x200) MX[B]
	[6] -1	0	0xfe9fc000 - 0xfe9fffff (0x4000) MX[B]
	[7] -1	0	0xf9fff400 - 0xf9fff4ff (0x100) MX[B]
	[8] -1	0	0xf9fff800 - 0xf9fffbff (0x400) MX[B]
	[9] -1	0	0xf9ff8000 - 0xf9ffbfff (0x4000) MX[B]
	[10] -1	0	0xf9fffc00 - 0xf9ffffff (0x400) MX[B]
	[11] -1	0	0xfe880000 - 0xfe8fffff (0x80000) MX[B](B)
	[12] -1	0	0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
	[13] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[14] -1	0	0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[20] -1	0	0x0000ec00 - 0x0000ec7f (0x80) IX[B]
	[21] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[22] -1	0	0x0000d480 - 0x0000d483 (0x4) IX[B]
	[23] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[24] -1	0	0x0000d880 - 0x0000d883 (0x4) IX[B]
	[25] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[26] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[27] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[28] -1	0	0x00009480 - 0x0000948f (0x10) IX[B]
	[29] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[30] -1	0	0x00009880 - 0x00009887 (0x8) IX[B]
	[31] -1	0	0x00009c00 - 0x00009c03 (0x4) IX[B]
	[32] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[33] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[34] -1	0	0x00008400 - 0x0000840f (0x10) IX[B]
	[35] -1	0	0x00008480 - 0x0000848f (0x10) IX[B]
	[36] -1	0	0x00008800 - 0x00008803 (0x4) IX[B]
	[37] -1	0	0x00008880 - 0x00008887 (0x8) IX[B]
	[38] -1	0	0x00008c00 - 0x00008c03 (0x4) IX[B]
	[39] -1	0	0x00009000 - 0x00009007 (0x8) IX[B]
	[40] -1	0	0x0000a480 - 0x0000a49f (0x20) IX[B]
	[41] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[42] -1	0	0x0000a080 - 0x0000a09f (0x20) IX[B]
	[43] -1	0	0x0000ac00 - 0x0000ac1f (0x20) IX[B]
	[44] -1	0	0x0000a880 - 0x0000a89f (0x20) IX[B]
	[45] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[46] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B](B)
	[47] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[48] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 62.94.0d.00.1d
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 9600 GT at PCI:1:0:0:
(--) NVIDIA(0):     LG L194W (CRT-0)
(--) NVIDIA(0): LG L194W (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(==) NVIDIA(0): 
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0): 
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
(--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfebff800 - 0xfebfffff (0x800) MX[B]
	[5] -1	0	0xfeaffc00 - 0xfeaffdff (0x200) MX[B]
	[6] -1	0	0xfe9fc000 - 0xfe9fffff (0x4000) MX[B]
	[7] -1	0	0xf9fff400 - 0xf9fff4ff (0x100) MX[B]
	[8] -1	0	0xf9fff800 - 0xf9fffbff (0x400) MX[B]
	[9] -1	0	0xf9ff8000 - 0xf9ffbfff (0x4000) MX[B]
	[10] -1	0	0xf9fffc00 - 0xf9ffffff (0x400) MX[B]
	[11] -1	0	0xfe880000 - 0xfe8fffff (0x80000) MX[B](B)
	[12] -1	0	0xfa000000 - 0xfbffffff (0x2000000) MX[B](B)
	[13] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[14] -1	0	0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[20] -1	0	0x0000ec00 - 0x0000ec7f (0x80) IX[B]
	[21] -1	0	0x0000d400 - 0x0000d40f (0x10) IX[B]
	[22] -1	0	0x0000d480 - 0x0000d483 (0x4) IX[B]
	[23] -1	0	0x0000d800 - 0x0000d807 (0x8) IX[B]
	[24] -1	0	0x0000d880 - 0x0000d883 (0x4) IX[B]
	[25] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[26] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[27] -1	0	0x00009400 - 0x0000940f (0x10) IX[B]
	[28] -1	0	0x00009480 - 0x0000948f (0x10) IX[B]
	[29] -1	0	0x00009800 - 0x00009803 (0x4) IX[B]
	[30] -1	0	0x00009880 - 0x00009887 (0x8) IX[B]
	[31] -1	0	0x00009c00 - 0x00009c03 (0x4) IX[B]
	[32] -1	0	0x0000a000 - 0x0000a007 (0x8) IX[B]
	[33] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[34] -1	0	0x00008400 - 0x0000840f (0x10) IX[B]
	[35] -1	0	0x00008480 - 0x0000848f (0x10) IX[B]
	[36] -1	0	0x00008800 - 0x00008803 (0x4) IX[B]
	[37] -1	0	0x00008880 - 0x00008887 (0x8) IX[B]
	[38] -1	0	0x00008c00 - 0x00008c03 (0x4) IX[B]
	[39] -1	0	0x00009000 - 0x00009007 (0x8) IX[B]
	[40] -1	0	0x0000a480 - 0x0000a49f (0x20) IX[B]
	[41] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[42] -1	0	0x0000a080 - 0x0000a09f (0x20) IX[B]
	[43] -1	0	0x0000ac00 - 0x0000ac1f (0x20) IX[B]
	[44] -1	0	0x0000a880 - 0x0000a89f (0x20) IX[B]
	[45] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[46] -1	0	0x0000bc00 - 0x0000bc7f (0x80) IX[B](B)
	[47] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[48] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "it"
(**) Keyboard0: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button

Delcaran Lëdeloth

Da niubbo quale sono penso che se il problema fosse nella scheda video, i led della tastiera funzionerebbero a dovere. Se il problema fosse nel kernel, i tasti magici non funzionerebbero come invece fanno. Quindi è plausibile che sia proprio la RAM... A me è successa una cosa simile, con il pc che andava in freeze totale (non in crash, proprio si congelava) e l'unica era spegnerlo con il tasto di accensione. Nel mio caso il problema era l'alimentazione delle porte PCIMCA, a cui non arrivava corrente e causava il blocco dell'intero sistema a intervalli totalmente irregolari... Il mio era un computer vecchio, ma è un'eventualità, quella del guasto hardware, da tenere sempre in considerazione...

Savius · Messaggio da **Savius** » lun 9 feb 2009, 18:05

Grazie Delcaran Lëdeloth,
ma se fosse la RAM allora dovrebbe farlo spesso soprattutto quando faccio partire applicazioni che consumano più risorse: ad esempio prima ho fato partire addirittura un gioco sotto "wine" ed è andato tutto liscio. Stamattina invece leggevo un semplice pdf che avevo aperto già da un pezzo... Apparentemente non ho richiesto uso di ulteriore RAM mentre leggevo il pdf. Quel che mi viene da pensare a sto punto è l'alimentatore ma anche qui non capisco perché si presenti una tantum il problema... (Per fortuna.

)

*aggiornamento:

Nessuno sa da cosa possa dipendere? Help Please!!!

Savius · Messaggio da **Savius** » sab 21 feb 2009, 13:09

UP

Visto che era andata a finire in seconda pagina mi son permesso di riportarla in prima sorry!

Savius · Messaggio da **Savius** » dom 1 mar 2009, 13:44

Nonostante le mie tante supposizioni non sono ancora riuscito a capire da cosa possano dipendere questi improvvisi crash randomici che mi capitano ogni tanto... Davvero nessuno ha avuto esperienze simili e/o sa da cosa possa dipendere il problema e, soprattutto, come risolverlo?

PS
Scusate i post consecutivi

Messaggio da **danix** » dom 1 mar 2009, 14:10

non saprei dirti da cosa dipendano i crash, ma posso consigliarti una sequenza di sysrq un po' più estesa di quella che hai usato: reisub se il sistema ancora risponde (come credo che faccia) già arrivato alla E o al massimo alla I dovresti trovarti in init3 a rifare il login

senza bisogno di riavviare la macchina... guarda su wikipedia il significato dei sysrq che ti ho citato...

Mario Vanoni · Messaggio da **Mario Vanoni** » dom 1 mar 2009, 14:37

Savius ha scritto:Nonostante le mie tante supposizioni non sono ancora riuscito a capire da cosa possano dipendere questi improvvisi crash randomici che mi capitano ogni tanto... Davvero nessuno ha avuto esperienze simili e/o sa da cosa possa dipendere il problema e, soprattutto, come risolverlo?

Non esperienze PC, ma esperienza di vecchio elettronico.

Controlla la tensione che ti fornisce la tua ENEL.

Qui a Cuasso il nominale di 230VAC, norma CE,
scende spesso e volentieri sotto i 210VAC.

Avendo le macchine principali:
- con alimentazioni di 850W, ne consumano solo 200W
- usando una UPS APC RS1000 da 1000W
non ne risento, tranne quando interrompono per 4-5 ore.
E quello succede 4-5 volte all'anno, sic!
La UPS regge 10 minuti, quindi blackout di minuti no problems,
in dubbio dopo 5 minuti faccio halt/powerdown.

EDIT:
Una terza macchina senza UPS ed alimentazione scarsa,
dopo 3 secondi senza ENEL va in TILT,
reboot con fsck.

Savius · Messaggio da **Savius** » dom 1 mar 2009, 16:01

Innanzi tutto grazie per la vostra risposta! ^^
Siete stati come sempre molto gentili ed esaustivi nelle vostre spiegazioni e passa subito anch'io nel fornirvi altre info.

Rispondo prima a Mario che ha avuto una giusta osservazione, cui avevo anch'io ipotizzato, ma che ora, riflettendoci, non può sussistere. Dico così perché anch'io uso un UPS cui ho collegato il PC e mi è capitato addirittura che la corrente saltasse senza che il sistema andasse in crash e avendo tutto il tempo di spegnerlo in maniera corretta.

Danix non conoscevo questa combinazione e facendo come dici ho letto anche il significato delle altre lettere da te citate, la prossima volta proverò come mi hai consigliato tu.

Fortunatamente il problema non ha una frequenza di incidenza molto alta ma vi assicuro che è davvero fastidioso soprattuto se si sta lavorando su dati importanti che non sono ancora stati salvati o con altri applicativi... La cosa più brutta è non sapere di cosa si tratta perché, se fosse un difetto hardware avrei modo di risolverlo dato che sono ancora in garanzia, se fosse un problema software dovuto magari a qualche conflitto o altro, almeno mi attiverei nel cercare una possibile soluzione e, se proprio questa non vi sia, mi metterei l'animo in pace.

Mario Vanoni · Messaggio da **Mario Vanoni** » dom 1 mar 2009, 16:54

Precisazione, alla UPS sono collegati:
- PC
- schermo
- modem ADSL
- router ethernet

La stampante laser ethernet _NO_.

Con il modem non sulla UPS,
le 3-4 interruzioni di corrente a distanti di minuti
lo mandavano in TILT,
spegnere, aspettare 3 minuti,
riaccendere, OK.

Porte del PC collegate a cose alimentate dalla rete,
nel reset dopo un blackout possono causare errori.

Savius · Messaggio da **Savius** » dom 1 mar 2009, 18:04

Beh allora, nel mio caso ho collegato all'UPS il PC, il monitor, il router e le casse. La stampante anch'io ce l'ho scollegata dall'UPS o meglio, è collegata alla presa "normale" ma sta sempre spenta (almeno nei casi in cui è successo il crash del sistema). Al router sta collegato il PC fisso ed anche il portatile; potrebbe esser lui la causa?

Mario Vanoni · Messaggio da **Mario Vanoni** » dom 1 mar 2009, 18:43

Savius ha scritto:Beh allora, nel mio caso ho collegato all'UPS il PC, il monitor, il router e le casse. La stampante anch'io ce l'ho scollegata dall'UPS o meglio, è collegata alla presa "normale" ma sta sempre spenta (almeno nei casi in cui è successo il crash del sistema). Al router sta collegato il PC fisso ed anche il portatile; potrebbe esser lui la causa?

Molto improbabile, il router fa da filtro!

Altro hint di un vecchio elettronico,
non so quanto conosci la distribuzione elettrica.

Una presa ((o o o)) ha:
- la fase 230VAC/50Hz
- in mezzo la presa a terra
- il neutro, cioe` 0 verso il 230VAC

Dando per scontato che la presa a terra sia di ottima qualita`,
sugli altri due fili entrano picchi anche altissimi,
dovuti a temporali, macchine industriali o, puro caso ...

Invertendo di 180 gradi la spina ((o o o)) nella presa,
spesso questi disturbi si riducono o si annullano.
Vale anche per le spine tedesche SCHUKO.

Savius · Messaggio da **Savius** » dom 1 mar 2009, 18:51

WOW!

Questo non lo sapevo! Quindi mi consigli di staccare la spina dell'UPS e ruotarla di 180° per poi reinserirla... Uhm... Devo dire che come cosa mi suona un po' inconsueta ma del resto tu ne sai più di me quindi non mi resta che provare (tanto tentar non nuoce) e valutare nel tempo se si ripresenta il problema (dato che a volte mi capita dopo alcuni giorni).
Grazie per l'info!

Mario Vanoni · Messaggio da **Mario Vanoni** » dom 1 mar 2009, 20:06

Savius ha scritto:WOW!
Questo non lo sapevo! Quindi mi consigli di staccare la spina dell'UPS e ruotarla di 180° per poi reinserirla... Uhm... Devo dire che come cosa mi suona un po' inconsueta ma del resto tu ne sai più di me quindi non mi resta che provare (tanto tentar non nuoce) e valutare nel tempo se si ripresenta il problema (dato che a volte mi capita dopo alcuni giorni).
Grazie per l'info!

ATTENTO

Vale per ogni spina nella rete ENEL _E_
per ogni apparecchio collegato alla tua rete informatica.
Comprese le spine attaccate alla UPS.
Cambiarne una, aspettare se il problema ricompare,
rimettere come prima, cambiare la seconda ecc.

Il problema e` quale polo porta la fase sull'apparecchio,
se la sua capacita` (FARAD, quindi capacitiva)
e` alta verso la massa (terra) comune del sistema
ti distribuisce i picchi sul sistema, ma puo` essere uno solo!

Mario Vanoni · Messaggio da **Mario Vanoni** » dom 1 mar 2009, 20:33

Esperienza aggiornata:

stasera la cara ENEL mi fornisce 205VAC, pago 230VAC!

Stampo due pagine sulla laser,
la UPS reclama con BEEP,
l'accensione del laser ha ridotto l'ENEL sotto 194VAC,
limite quale la mia UPS reclama e registra.

Quindi controlla i limiti della tua UPS,
se per frazioni di secondo switcha,
il cambio di tensione forse e` una causa.

Intendo salto da 194/205 a 230VAC.

Savius · Messaggio da **Savius** » dom 1 mar 2009, 21:27

Il problema è capire come fare a controllare questi limiti dell'UPS che uso... Devo vedere se trovo il manuale. Tu come hai fatto a vedere quanti VAC ti sta fornendo l'ENEL? Dal contatore?

*Un aggiornamento al volo!
Prima, mentre navigavo, all'improvviso il sistema è andato in freeze e mi lampeggiavano continuamente i led della tastiera corrispondenti a "Caps Lock" e "Scroll Lock" e non rispondeva ai "rsys magic key"!

slacky.eu

[RISOLTO] Problema driver Nvidia

[RISOLTO] Problema driver Nvidia

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema

Re: Improvvisi crash del sistema