domande post installazione per utente fresco

Se avete problemi con l'installazione e la configurazione di Slackware postate qui. Non usate questo forum per argomenti generali... per quelli usate Gnu/Linux in genere.

Moderatore: Staff

Regole del forum
1) Citare sempre la versione di Slackware usata, la versione del Kernel e magari anche la versione della libreria coinvolta. Questi dati aiutano le persone che possono rispondere.
2) Per evitare confusione prego inserire in questo forum solo topic che riguardano appunto Slackware, se l'argomento è generale usate il forum Gnu/Linux in genere.
3) Leggere attentamente le risposte ricevute.
4) Scrivere i messaggi con il colore di default, evitare altri colori.
5) Scrivere in Italiano o in Inglese, se possibile grammaticalmente corretto, evitate stili di scrittura poco chiari, quindi nessuna abbreviazione tipo telegramma o scrittura stile SMS o CHAT.
6) Appena registrati è consigliato presentarsi nel forum dedicato.

La non osservanza delle regole porta a provvedimenti di vari tipo da parte dello staff, in particolare la non osservanza della regola 5 porta alla cancellazione del post e alla segnalazione dell'utente. In caso di recidività l'utente rischia il ban temporaneo.
Rispondi
centoventicinque
Linux 0.x
Linux 0.x
Messaggi: 20
Iscritto il: lun 4 ott 2010, 13:10
Slackware: tristemente 13
Kernel: 2.6.39
Desktop: openbox/awesome/kde
Distribuzione: arch,slackware

domande post installazione per utente fresco

Messaggio da centoventicinque »

ciao a tutti, sono nuovo di slackware ma non di linux .

ho deciso di provare slackware per curiosità e per kde .

l'installazione è andata a buon fine ma adesso ho qualche problemino

-lingua italiana in X : nonostante xorg.conf alla voce ketboard abbia " it" dentro X mi ritrovo la tastiera americana [risolto]
-firefox è in inglese ed è alla versione 3.xx e non riesco ad aggiornarlo ( problema credo dovuto al fatto che sto usando una versione datata , la 13 ! )
-ero gia a conoscenza del fatto che in slackware non venissero soddisfatte in automatico le dipendenze ma autonomamente non riesco ad ovviare a questo problema , sto provando swaret che però pare dare lo stesso problema .
-ho un problema con il video, quando scrollo ina pagina si muove a scatti e lentamente , ho una scheda video ati hd 3200 , possibile che sia un problema di driver ? Xorg è configurato come in arch dove non ho problemi

per ora grazie a tutti, nel mentre mi butto alla scoperta di questo nuovo sistema :D
Top
Avatar utente
414N
Iper Master
Iper Master
Messaggi: 2924
Iscritto il: mer 13 feb 2008, 16:19
Slackware: 15.0
Kernel: 5.15.19
Desktop: KDE5
Località: Bulagna
Contatta:
Contatta 414N

Re: domande post installazione per utente fresco

Messaggio da 414N »

Benvenuto! :thumbright:
centoventicinque ha scritto: -firefox è in inglese ed è alla versione 3.xx e non riesco ad aggiornarlo ( problema credo dovuto al fatto che sto usando una versione datata , la 13 ! )
Il fatto che non riesci ad aggiornarlo (presumo tramite la funzione di aggiornamento automatico presente in Firefox) è normale se lo usi come utente non privilegiato. Io ti consiglierei, se non hai già fatto "grandi cose", di installare Slackware 13.37, in modo da avere già in automatico l'ultima versione e tutte le librerie aggiornate per farlo funzionare.
In alternativa, ti puoi sempre scaricare l'archivio precompilato dal sito di firefox, estrarlo in una directory ed usarlo da lì.
Per la questione della lingua di Firefox, o usi una versione italianizzata, oppure scarichi un language pack dal sito delle estensioni di Firefox.
centoventicinque ha scritto: -ero gia a conoscenza del fatto che in slackware non venissero soddisfatte in automatico le dipendenze ma autonomamente non riesco ad ovviare a questo problema , sto provando swaret che però pare dare lo stesso problema.
Beh, non c'è metodo migliore di trial&error, tempo da dedicargli permettendo. ;)
Alcuni utenti del forum hanno realizzato anche slackyd, un tool per il download automatico dei pacchetti e delle loro dipendenze. Supporta, oltre al repository di pacchetti standard Slackware, anche il repository di slacky.
centoventicinque ha scritto: -ho un problema con il video, quando scrollo ina pagina si muove a scatti e lentamente , ho una scheda video ati hd 3200 , possibile che sia un problema di driver ? Xorg è configurato come in arch dove non ho problemi
Xorg non avrebbe bisogno di alcuna configurazione... Hai provato ad eliminare /etc/X11/xorg.conf e vedere come si comporta l'autorilevamento di X?
Prova a riportare il log di X (/var/log/Xorg.0.log) per vedere cosa combina (mi raccomando, output di comandi/spezzoni di codice tra tag code, altrimenti viene fuori un post chilometrico ed illeggibile).
Top
centoventicinque
Linux 0.x
Linux 0.x
Messaggi: 20
Iscritto il: lun 4 ott 2010, 13:10
Slackware: tristemente 13
Kernel: 2.6.39
Desktop: openbox/awesome/kde
Distribuzione: arch,slackware

Re: domande post installazione per utente fresco

Messaggio da centoventicinque »

sarà fatto , nel mentre aggiungo un dettaglio poco gradevole

ho 2 dischi fissi , su uno di questi c'è arch, sul secondo una partizione dati ( ext4 ) e le 4 di slackware .

quando ho installato slackware il disco di arch non era presente , se ora cerco di avviare slackware con il disco di arch inserito lilo lo avvia , carica il kernel ma si blocca al mounting dei dischi , non è che slackware li indetifica in fstab come /dev/xxx e non in UUUID ? se così me lo spiego, altrimenti no :roll:

questo è il log di xorg

Codice: Seleziona tutto

X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux siderium 2.6.29.6-smp #2 SMP Mon Aug 17 00:52:54 CDT 2009 i686
Build Date: 03 August 2009  06:51:50PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 24 16:12:02 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/local" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/cyrillic,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/cyrillic,
	built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1de0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:5:0) 1002:9610:1849:9610 rev 0, Mem @ 0xd0000000/268435456, 0xfeaf0000/65536, 0xfe900000/1048576, I/O @ 0x0000d000/256
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[21] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[22] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[23] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[24] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[25] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[26] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[27] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[28] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[29] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[30] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[31] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[32] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[33] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[34] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[35] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
	compiled for 1.6.1, module version = 1.2.5
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
	RV505 : Radeon X1550, X1550 64bit.
	RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
	RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
	R520  : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
	RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
	RV535 : Radeon X1300, X1650.
	RV550 : Radeon X2300 HD.
	RV560 : Radeon X1650.
	RV570 : Radeon X1950, X1950 GT; FireGL V7400.
	R580  : Radeon X1900, X1950; AMD Stream Processor.
	R600  : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
	RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
	RV620 : Radeon HD 3450, HD 3470.
	RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
		FireGL V3600/V5600.
	RV635 : Radeon HD 3650, HD 3670.
	RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
	R680  : Radeon HD 3870 X2.
	M52   : Mobility Radeon X1300.
	M54   : Mobility Radeon X1400; M54-GL.
	M56   : Mobility Radeon X1600; Mobility FireGL V5200.
	M58   : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
	M62   : Mobility Radeon X1350.
	M64   : Mobility Radeon X1450, X2300.
	M66   : Mobility Radeon X1700, X1700 XT; FireGL V5250.
	M68   : Mobility Radeon X1900.
	M71   : Mobility Radeon HD 2300.
	M72   : Mobility Radeon HD 2400; Radeon E2400.
	M74   : Mobility Radeon HD 2400 XT.
	M76   : Mobility Radeon HD 2600;
		(Gemini ATI) Mobility Radeon HD 2600 XT.
	M82   : Mobility Radeon HD 3400.
	M86   : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
	M88   : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
	RS600 : Radeon Xpress 1200, Xpress 1250.
	RS690 : Radeon X1200, X1250, X1270.
	RS740 : RS740, RS740M.
	RS780 : Radeon HD 3100/3200/3300 Series.
	RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
	R700  : Radeon R700.
	M98   : Radeon M98 Mobility.
	RV730 : Radeon HD4670, HD4650.
	M96   : Radeon M96 Mobility.
	RV710 : Radeon HD4570, HD4350.

(II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b

(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[21] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[22] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[23] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[24] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[25] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[26] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[27] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[28] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[29] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[30] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[31] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[32] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[33] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[34] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[35] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[21] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[22] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[23] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[24] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[25] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[26] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[27] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[28] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[29] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[30] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[31] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[32] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[33] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[34] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[35] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[36] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[37] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[38] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[39] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[40] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Option "DRI" "true"
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9610:0x1849:0x9610.
	If - and only if - your card does not work or does not work optimally
	please contact radeonhd@opensuse.org to help rectify this.
	Use the subject: 0x9610:0x1849:0x9610: <name of board>
	and *please* describe the problems you are seeing
	in your message.
(--) RADEONHD(0): Detected an RS780 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xfeaf0000 to 0xb79ca000 (size 0x00010000)
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom: 
	SubsystemVendorID: 0x1002 SubsystemID: 0x1002
	IOBaseAddress: 0xd000
	Filename: K10DX10DP_D_
	BIOS Bootup Message: 

ASROCK RS780 VBIOS 082                                                      


(II) RADEONHD(0): Analog TV Default Mode: 135466609
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 393216kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x17ffc000
(II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x17ffc000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 402636800 (size: 16384) extends beyond available framebuffer size 268435456
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 500000
(II) RADEONHD(0): Default Memory Clock: 266000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 14320
(WW) RADEONHD(0): Direct rendering for R600 and up forced on - This is NOT officially supported yet and may cause instability or lockups
(II) RADEONHD(0): Found libdri 5.4.0.
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card2
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card3
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card5
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card6
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card7
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card8
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card9
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card10
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card11
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card12
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card13
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: node name is /dev/dri/card14
(EE) RADEONHD(0): RHDDRIVersionCheck: drmOpen("radeon", "pci:0000:01:05.0") failed.
(WW) RADEONHD(0): RHDDRIPreInit: Version check failed. Disabling DRI.
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 14320
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 14320
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_D DFP3", RHD_DDC_1, RHD_HPD_2, { RHD_OUTPUT_KLDSKP_LVTMA, RHD_OUTPUT_NONE } }
(--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1
(--) RADEONHD(0): Attaching Output UNIPHY_KLDSKP_LVTMA to Connector DVI-D 1
(II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A
(II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output UNIPHY_KLDSKP_LVTMA
(II) RADEONHD(0): Output VGA_1 using monitor section Monitor0
(II) RADEONHD(0): Output VGA_1 has no monitor section
(II) RADEONHD(0): Output DVI-D_1 has no monitor section
(II) RADEONHD(0): DAC A: Sensed Output: VGA
(II) RADEONHD(0): I2C device "RHD I2C line 0:E-EDID segment register" registered at address 0x60.
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for 
(II) RADEONHD(0): Manufacturer: GSM  Model: 5774  Serial#: 16843009
(II) RADEONHD(0): Year: 2009  Week: 1
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEONHD(0): Sync:  Separate
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 48  vert.: 27
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.646 redY: 0.334   greenX: 0.303 greenY: 0.616
(II) RADEONHD(0): blueX: 0.147 blueY: 0.067   whiteX: 0.313 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x870@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEONHD(0): #1: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
(II) RADEONHD(0): #2: hsize: 1152  vsize 864  refresh: 60  vid: 16497
(II) RADEONHD(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) RADEONHD(0): #4: hsize: 1280  vsize 960  refresh: 75  vid: 20353
(II) RADEONHD(0): #5: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 138.5 MHz   Image Size:  598 x 336 mm
(II) RADEONHD(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) RADEONHD(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz
(II) RADEONHD(0): Monitor name: M227WDP
(II) RADEONHD(0): Monitor name: 
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 	00ffffffffffff001e6d745701010101
(II) RADEONHD(0): 	0113010368301b78eaabd5a5554d9d25
(II) RADEONHD(0): 	115054a56b808180818f7140b300814f
(II) RADEONHD(0): 	714f010101011a3680a070381f403020
(II) RADEONHD(0): 	350056502100001a000000fd00384b1e
(II) RADEONHD(0): 	5311000a202020202020000000fc004d
(II) RADEONHD(0): 	3232375744500a2020202020000000fc
(II) RADEONHD(0): 	000a2020202020202020202020200000
(II) RADEONHD(0): EDID vendor "GSM", prod id 22388
(II) RADEONHD(0): Using EDID range info for horizontal sync
(II) RADEONHD(0): Using EDID range info for vertical refresh
(II) RADEONHD(0): Printing DDC gathered Modelines:
(II) RADEONHD(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEONHD(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
(II) RADEONHD(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEONHD(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 -hsync +vsync (75.2 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Output VGA_1 connected
(II) RADEONHD(0): Output DVI-D_1 disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output VGA_1 using initial mode 1920x1080
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000)
(**) RADEONHD(0): Display dimensions: (480, 270) mm
(**) RADEONHD(0): DPI set to (101, 180)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.1.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[21] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[22] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[23] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[24] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[25] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[26] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[27] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[28] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[29] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[30] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[31] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[32] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[33] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[34] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[35] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[36] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[37] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[38] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[39] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[40] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEONHD(0): Mapped IO @ 0xfeaf0000 to 0xb79ca000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0xa79a6000 (size 0x10000000)
(WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1920x1080"  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync
None
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(II) RADEONHD(0): DPMS enabled
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 598 x 336
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event2"
(II) Logitech USB Receiver: Found 12 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event1"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) RADEONHD(0): DAC A: Sensed Output: VGA
(II) RADEONHD(0): EDID data for 
(II) RADEONHD(0): Manufacturer: GSM  Model: 5774  Serial#: 16843009
(II) RADEONHD(0): Year: 2009  Week: 1
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) RADEONHD(0): Sync:  Separate
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 48  vert.: 27
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.646 redY: 0.334   greenX: 0.303 greenY: 0.616
(II) RADEONHD(0): blueX: 0.147 blueY: 0.067   whiteX: 0.313 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x870@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEONHD(0): #1: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
(II) RADEONHD(0): #2: hsize: 1152  vsize 864  refresh: 60  vid: 16497
(II) RADEONHD(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) RADEONHD(0): #4: hsize: 1280  vsize 960  refresh: 75  vid: 20353
(II) RADEONHD(0): #5: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 138.5 MHz   Image Size:  598 x 336 mm
(II) RADEONHD(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) RADEONHD(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz
(II) RADEONHD(0): Monitor name: M227WDP
(II) RADEONHD(0): Monitor name: 
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 	00ffffffffffff001e6d745701010101
(II) RADEONHD(0): 	0113010368301b78eaabd5a5554d9d25
(II) RADEONHD(0): 	115054a56b808180818f7140b300814f
(II) RADEONHD(0): 	714f010101011a3680a070381f403020
(II) RADEONHD(0): 	350056502100001a000000fd00384b1e
(II) RADEONHD(0): 	5311000a202020202020000000fc004d
(II) RADEONHD(0): 	3232375744500a2020202020000000fc
(II) RADEONHD(0): 	000a2020202020202020202020200000
(II) RADEONHD(0): EDID vendor "GSM", prod id 22388
(II) RADEONHD(0): Using hsync ranges from config file
(II) RADEONHD(0): Using vrefresh ranges from config file
(II) RADEONHD(0): Printing DDC gathered Modelines:
(II) RADEONHD(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEONHD(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
(II) RADEONHD(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEONHD(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 -hsync +vsync (75.2 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Receiver: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Receiver: Close
(II) UnloadModule: "evdev"
questo dopo la configurazione manuale , adesso ho rimosso xorg.conf , al prossimo riavvio vediamo che dice
Top
Avatar utente
414N
Iper Master
Iper Master
Messaggi: 2924
Iscritto il: mer 13 feb 2008, 16:19
Slackware: 15.0
Kernel: 5.15.19
Desktop: KDE5
Località: Bulagna
Contatta:
Contatta 414N

Re: domande post installazione per utente fresco

Messaggio da 414N »

mm, è sparito il mio post di risposta. Beh, pazienza :)
Allora, per quanto riguarda il file /etc/fstab di Slackware, questi viene riempito durante la fase di installazione coi device (non gli UUID) che indichi. Quindi c'hai azzeccato.
Lo puoi sempre modificare in modo che usi gli UUID, naturalmente ;)
Riguardo X, vedo che viene caricato il modulo radeonhd. Io proverei ad usare il normale ati o radeon, se l'autorilevamento non li usa già.
Top
centoventicinque
Linux 0.x
Linux 0.x
Messaggi: 20
Iscritto il: lun 4 ott 2010, 13:10
Slackware: tristemente 13
Kernel: 2.6.39
Desktop: openbox/awesome/kde
Distribuzione: arch,slackware

Re: domande post installazione per utente fresco

Messaggio da centoventicinque »

l'autorilevamento carica di suo il modulo radeonhd ;)

quanto a fstab , edito semplicemete con i corretti uuid al posto dei dev o cambia altro con la sintassi ?

ora che sono da arch controllerei volentieri ma non so perche col kernel nuovo "mout" è andato a farsi benedire !
Top
Avatar utente
414N
Iper Master
Iper Master
Messaggi: 2924
Iscritto il: mer 13 feb 2008, 16:19
Slackware: 15.0
Kernel: 5.15.19
Desktop: KDE5
Località: Bulagna
Contatta:
Contatta 414N

Re: domande post installazione per utente fresco

Messaggio da 414N »

centoventicinque ha scritto:l'autorilevamento carica di suo il modulo radeonhd ;)
Ah, ok. Mi era sfuggito prima, però
centoventicinque ha scritto:

Codice: Seleziona tutto

EE) RADEONHD(0): RHDDRIVersionCheck: drmOpen("radeon", "pci:0000:01:05.0") failed.
(WW) RADEONHD(0): RHDDRIPreInit: Version check failed. Disabling DRI.
questa mi sembra papabile come causa della tua perdita di performance. Prova a forzare il caricamento del driver radeon tramite un xorg.conf minimale oppure un file apposito (con solo una sezione device riguardante la scheda video) in /etc/X11/xorg.conf.d/ (deve avere come estensione .conf).
centoventicinque ha scritto: quanto a fstab , edito semplicemete con i corretti uuid al posto dei dev o cambia altro con la sintassi ?
Certo. Al posto di /dev/abc basta mettere UUID=.......
Non credo che la sintassi di /etc/fstab cambi da una distro Linux all'altra. Se guardi in man 5 fstab puoi leggere come specificare il device anche solo tramite la sua label, se ce l'ha.
Top
centoventicinque
Linux 0.x
Linux 0.x
Messaggi: 20
Iscritto il: lun 4 ott 2010, 13:10
Slackware: tristemente 13
Kernel: 2.6.39
Desktop: openbox/awesome/kde
Distribuzione: arch,slackware

Re: domande post installazione per utente fresco

Messaggio da centoventicinque »

ottimo per fstab , invece mi risulta più complicato xorg !

ci lavorerò quando ho un minuto, sicuramente il primo step è mettere la versione corrente , poi si vedrà
Top
Rispondi

Torna a “Slackware”